[one-users] Onevm in Failed state
Preetham Nagaraju
preetham.nagaraju at gmail.com
Fri Apr 19 11:17:38 PDT 2013
Hi Sir,
I got to know from the document that Kernel, Kernel_DS & Bootloader are
mandatory..... *But i am not getting what parameter i need to specify there*
...
>From the document they have given:-
OS = [ KERNEL = /vmlinuz, --what i need to give here & from where
i will get
INITRD = /initrd.img,
ROOT = sda1,
KERNEL_CMD = "ro xencons=tty console=tty1"]
OS = [ KERNEL_DS = "$FILE[IMAGE=\"kernel 3.6\"]",
INITRD_DS = "$FILE[IMAGE=\"initrd 3.6\"]",
ROOT = sda1,
KERNEL_CMD = "ro xencons=tty console=tty1"
But i am not getting what name i need to enter under kernel, kernel_cmd &
root tab.... My host m/c has Ubuntu 12.04 os and XEN hypervisor....
On Fri, Apr 19, 2013 at 8:23 PM, Carlos Martín Sánchez <
cmartin at opennebula.org> wrote:
> Hi,
>
> Here are some references about these attributes:
>
> http://opennebula.org/documentation:rel4.0:template#os_and_boot_options_section
> http://opennebula.org/documentation:rel4.0:xeng#usage
>
> Regards
>
> --
> Carlos Martín, MSc
> Project Engineer
> OpenNebula - The Open-source Solution for Data Center Virtualization
> www.OpenNebula.org | cmartin at opennebula.org | @OpenNebula<http://twitter.com/opennebula><cmartin at opennebula.org>
>
>
> On Fri, Apr 19, 2013 at 3:53 PM, Preetham Nagaraju <
> preetham.nagaraju at gmail.com> wrote:
>
>> *Hi Sir,*
>>
>> From failed vm log file, i got to know that *"i need to specify Kernel &
>> Bootloader"* at the time of creating VM template --- under OS Booting
>> tab.....
>>
>> But what parameters i need to specify there, since i want to create
>> Ubuntu desktop os as my guest os vm....i.e what should i specify under :-
>> *Boot, Root, Kernel cmd, Bootloader, Kernel tab & Ramdisk tab's........*
>>
>> I will be uploading image of *"**Ubuntu 12.04 desktop.iso"* os and after
>> it comes to Ready state, i will start creating VM Template.... Please guide
>> me what the paramenters to be entered in the vm template tab's for creating
>> ubuntu as guest os......
>>
>>
>> On Thu, Apr 18, 2013 at 4:36 PM, Preetham Nagaraju <
>> preetham.nagaraju at gmail.com> wrote:
>>
>>>
>>> Hi,
>>>
>>> Not able to create vm's from marketplace images nor directly uploading
>>> the images, in the 2 host m/c which has Ubuntu 12.04 OS & XEN
>>> hypervisor..... where xend daemon is also running....
>>>
>>> Please guide me how to create vm's in 2nd host m/c and make them
>>> "Running" .....
>>>
>>>
>>> On Thu, Apr 18, 2013 at 4:31 PM, Preetham Nagaraju <
>>> preetham.nagaraju at gmail.com> wrote:
>>>
>>>> Hi,
>>>>
>>>> If i try to import OS which supports xen i.e. Debian Squeeze-xen image
>>>> also, the vm created using this image also goes to "Failed" state...
>>>>
>>>>
>>>> On Thu, Apr 18, 2013 at 12:48 PM, Preetham Nagaraju <
>>>> preetham.nagaraju at gmail.com> wrote:
>>>>
>>>>> *Hi Sir,*
>>>>>
>>>>> You were right sir, it was ttylinux-kvm image i was using.....
>>>>>
>>>>> Since i have 2 m/c's with 2 different hypervisor's, i am not getting
>>>>> any image common to both in Marketplace....
>>>>>
>>>>> So i downloaded Ubuntu 12.04 desktop.iso os and directly uploaded the
>>>>> image.....
>>>>> Went directly to "Image" tab selected "Create" and "Uploaded" the
>>>>> downloaded image by giving the path... Image was uploaded successfully....
>>>>>
>>>>> Then created "Template" with updating info in "General, Storage,
>>>>> Network, Input/Output" tabs... Template was created.....
>>>>>
>>>>> And then gave Instantiate with vm's as 2 but the vm in 2nd node is
>>>>> same in* "Failed"* state..... Please find the attachment for failed
>>>>> vm log file....
>>>>>
>>>>> And also vm in the 1st node is in "Running" state but there is network
>>>>> in it... i.e internet is not working....
>>>>>
>>>>>
>>>>>
>>>>> On Wed, Apr 17, 2013 at 10:23 PM, Carlos Martín Sánchez <
>>>>> cmartin at opennebula.org> wrote:
>>>>>
>>>>>> Can you doble-check that? I can only see ttylinux appliances for kvm
>>>>>> and vmware.
>>>>>>
>>>>>> --
>>>>>> Carlos Martín, MSc
>>>>>> Project Engineer
>>>>>> OpenNebula - The Open-source Solution for Data Center Virtualization
>>>>>> www.OpenNebula.org | cmartin at opennebula.org | @OpenNebula<http://twitter.com/opennebula><cmartin at opennebula.org>
>>>>>>
>>>>>>
>>>>>> On Wed, Apr 17, 2013 at 6:38 PM, Preetham Nagaraju <
>>>>>> preetham.nagaraju at gmail.com> wrote:
>>>>>>
>>>>>>> Hi,
>>>>>>>
>>>>>>> But i am importing the ttylinux-xen image only from Marketplace......
>>>>>>>
>>>>>>>
>>>>>>> On Wed, Apr 17, 2013 at 9:12 PM, Carlos Martín Sánchez <
>>>>>>> cmartin at opennebula.org> wrote:
>>>>>>>
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>> OpenNebula will not convert the KVM ttylinux VM to a Xen ready VM.
>>>>>>>> You need to create or import a xen-ready VM.
>>>>>>>>
>>>>>>>> Regards
>>>>>>>>
>>>>>>>> --
>>>>>>>> Carlos Martín, MSc
>>>>>>>> Project Engineer
>>>>>>>> OpenNebula - The Open-source Solution for Data Center Virtualization
>>>>>>>> www.OpenNebula.org | cmartin at opennebula.org | @OpenNebula<http://twitter.com/opennebula><cmartin at opennebula.org>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Wed, Apr 17, 2013 at 4:15 PM, Preetham Nagaraju <
>>>>>>>> preetham.nagaraju at gmail.com> wrote:
>>>>>>>>
>>>>>>>>> *Hi Sir,*
>>>>>>>>>
>>>>>>>>> Firstly, i have installed *Opennebula 3.9.80 on Ubuntu 12.04 OS
>>>>>>>>> which has KVM hypervisor* in it. I am using this machine as *both
>>>>>>>>> Fontend & Host/Node* machine. In this, Opennebula is working fine
>>>>>>>>> & the same m/c as node/host is also working fine i.e this host m/c in
>>>>>>>>> opennebula is in *"ON"* state.
>>>>>>>>>
>>>>>>>>> Further i have another host m/c i.e *2nd host m/c which has
>>>>>>>>> Ubuntu12.04 OS with XEN hypervisor*.. From the 1st m/c i can ssh
>>>>>>>>> passwordless to 2nd m/c & vice-versa and also automount from 1st m/c to 2nd
>>>>>>>>> m/c.... This 2nd host m/c is also added successfully to opennebula and it
>>>>>>>>> is also in *"ON"* state....
>>>>>>>>>
>>>>>>>>> *oneadmin at opennebula:~$* *onehost list*
>>>>>>>>>
>>>>>>>>> ID NAME CLUSTER RVM ALLOCATED_CPU
>>>>>>>>> ALLOCATED_MEM STAT
>>>>>>>>> 8 opennebula - 0 0 / 200 (0%) 0K /
>>>>>>>>> 991.8M (0%) on ----------------- 1st host m/c(KVM)
>>>>>>>>> 16 node1 - 0 0 / 200 (0%) 0K /
>>>>>>>>> 2G (0%) on ----------------- 2nd host m/c(XEN)
>>>>>>>>>
>>>>>>>>> After adding the host m/c's, further for creating VM's firstly i
>>>>>>>>> imported the ttylinux (for eg.) from "Marketplace" and when it came to
>>>>>>>>> "Ready" state, created the "Template".....
>>>>>>>>>
>>>>>>>>> *oneadmin at opennebula:~$ onetemplate list*
>>>>>>>>> ID USER GROUP NAME
>>>>>>>>> REGTIME
>>>>>>>>> 4 oneadmin oneadmin tty-linux
>>>>>>>>> 04/16 11:22:24
>>>>>>>>>
>>>>>>>>> After creating the template, gave "Instantiate" and selected the
>>>>>>>>> created template and gave No. vm's to deploy as 2...
>>>>>>>>> VM's got created but the VM in the 2nd host m/c is in *"Fail"*state whereas the VM in the 1st host m/c is in "Running" state....
>>>>>>>>>
>>>>>>>>> *oneadmin at opennebula:~$ onevm list*
>>>>>>>>> ID USER GROUP NAME STAT UCPU UMEM
>>>>>>>>> HOST TIME
>>>>>>>>> 10 oneadmin oneadmin ttylinux-vm fail 0
>>>>>>>>> 0K 0d 00h00 ----------------- 2nd
>>>>>>>>> host m/c(XEN)
>>>>>>>>> 11 oneadmin oneadmin ttylinux-vm runn 0 0K
>>>>>>>>> opennebula 0d 00h00 ----------------- 1st host
>>>>>>>>> m/c(KVM)
>>>>>>>>>
>>>>>>>>> Sir, please guide me where i have done mistake or gone wrong from
>>>>>>>>> the above, and help me out to come out from vm "Failed" state in the 2nd
>>>>>>>>> host m/c which has XEN hypervisor in it.....
>>>>>>>>>
>>>>>>>>> Sir, i have also updated the "sudoers" in the opennebula m/c i.e
>>>>>>>>> 1st host m/c and also in the 2nd host m/c... with giving all privileges....
>>>>>>>>>
>>>>>>>>> *%oneadmin ALL=(ALL) NOPASSWD: ALL
>>>>>>>>>
>>>>>>>>> %xen ALL=(ALL) NOPASSWD: /usr/sbin/xm *
>>>>>>>>> **%xen ALL=(ALL) NOPASSWD: /usr/sbin/xentop **
>>>>>>>>> *
>>>>>>>>> *
>>>>>>>>> And also have "uncommented" the drivers line in oned.config file
>>>>>>>>> for both KVM & XEN with dummy also.....
>>>>>>>>> *
>>>>>>>>> *
>>>>>>>>> Sir, please find the logs in the attachment.....
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Wed, Apr 17, 2013 at 2:55 PM, Carlos Martín Sánchez <
>>>>>>>>> cmartin at opennebula.org> wrote:
>>>>>>>>>
>>>>>>>>>> Hi,
>>>>>>>>>>
>>>>>>>>>> You may find the reason in the opennebula logs, see
>>>>>>>>>> /var/log/one/oned.log and vm-id.log; or in the xen logs in the host.
>>>>>>>>>> But if I understood your configuration, you are trying to run a
>>>>>>>>>> KVM machine on Xen.
>>>>>>>>>>
>>>>>>>>>> Regards
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> Carlos Martín, MSc
>>>>>>>>>> Project Engineer
>>>>>>>>>> OpenNebula - The Open-source Solution for Data Center
>>>>>>>>>> Virtualization
>>>>>>>>>> www.OpenNebula.org | cmartin at opennebula.org | @OpenNebula<http://twitter.com/opennebula><cmartin at opennebula.org>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Mon, Apr 15, 2013 at 11:26 AM, Preetham Nagaraju <
>>>>>>>>>> preetham.nagaraju at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> Hi Sir,
>>>>>>>>>>>
>>>>>>>>>>> Now i have added two host machines to Opennebula. First host m/c
>>>>>>>>>>> is the opennebula frontend itself and the other m/c which has Ubuntu 12.04
>>>>>>>>>>> & XEN hypervisor in it.... Both the host's are in "Running" i.e "ON"
>>>>>>>>>>> state...
>>>>>>>>>>>
>>>>>>>>>>> Then i am trying to create VM in these host m/c's. After
>>>>>>>>>>> uploading image & creating template, if i give "Instantiate" and give no.
>>>>>>>>>>> of deploy vm as :- 2 , two vm's must be created!!!!!
>>>>>>>>>>>
>>>>>>>>>>> *2 vm's are creating in two host m/c's* but the *vm in the
>>>>>>>>>>> second node* i.e Ubuntu 12.04 with XEN which is other than
>>>>>>>>>>> opennebula frontend m/c is going to *"FAILED" state,* but the
>>>>>>>>>>> vm created in the opennebula frontend m/c i.e first host, is in "RUNNING"
>>>>>>>>>>> state....
>>>>>>>>>>>
>>>>>>>>>>> From the frontend m/c i can ssh passwordless to the second m/c
>>>>>>>>>>> and vice-versa also successfully....
>>>>>>>>>>>
>>>>>>>>>>> sir please help me how to get the vm in "RUNNING" state in the
>>>>>>>>>>> 2nd m/c...
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Thu, Mar 14, 2013 at 11:27 PM, Preetham Nagaraju <
>>>>>>>>>>> preetham.nagaraju at gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> for (1) VNC viewer on local pc means on the host machine
>>>>>>>>>>>> sir....if it is so then i haven't installed VNC viewer on host machine, at
>>>>>>>>>>>> the time of installing openneula i installed noVNC_gems tat's all....
>>>>>>>>>>>>
>>>>>>>>>>>> for (2), i will run that command after creating vm, but i have
>>>>>>>>>>>> doubt that since we are creating the vm from template whether it can store
>>>>>>>>>>>> the vm or it will get deleted after the vm is shutdown... that's the
>>>>>>>>>>>> behaviour of vm after creating it by template right sir!!!!!
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Thu, Mar 14, 2013 at 11:17 PM, Tobias Honacker <
>>>>>>>>>>>> t.honacker at googlemail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>
>>>>>>>>>>>>> --> 2. After creating the VM and the OS is installed run sudo
>>>>>>>>>>>>> apt-get install acpid on it (VM)
>>>>>>>>>>>>> --> 1. did you install any VNC viewer on your local pc?
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Best regards,
>>>>>>>>>>>>> Tobias
>>>>>>>>>>>>>
>>>>>>>>>>>>> Am 14.03.2013 18:28, schrieb Preetham Nagaraju:
>>>>>>>>>>>>>
>>>>>>>>>>>>> Hi sir,
>>>>>>>>>>>>>
>>>>>>>>>>>>> i think for my first question (1) i need to make
>>>>>>>>>>>>> clear.... Desktop means not the desktop version of Ubuntu OS, now i am able
>>>>>>>>>>>>> to access the vm in command line's and not in the GUI mode..... i am able
>>>>>>>>>>>>> to host vm, but it is opening in command line mode and not in the gui.....
>>>>>>>>>>>>>
>>>>>>>>>>>>> and also for the reply by you for (2) "sudo apt-get install
>>>>>>>>>>>>> acpid" i need to run this command in the host machine or after creating the
>>>>>>>>>>>>> vm i need to run this command....????
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Thu, Mar 14, 2013 at 10:26 PM, Tobias Honacker <
>>>>>>>>>>>>> t.honacker at googlemail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --> 1. You have to download Ubuntu Desktop ISO to run
>>>>>>>>>>>>>> Desktop after the installation is done
>>>>>>>>>>>>>> Never installed any desktop on my servers yet but you can try
>>>>>>>>>>>>>> this link [1].
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --> 2. Not 100% sure but try to update the template and
>>>>>>>>>>>>>> shutdown the vm so changes can take effect. If not deploy a new VM.
>>>>>>>>>>>>>> Also install the acpi daemon on your VM:
>>>>>>>>>>>>>> sudo apt-get install acpid
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> This should help.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Best regards,
>>>>>>>>>>>>>> Tobias
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> [1]
>>>>>>>>>>>>>> http://www.filiwiese.com/installing-gnome-on-ubuntu-12-04-precise-pangolin/
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Von: Preetham Nagaraju <preetham.nagaraju at gmail.com>
>>>>>>>>>>>>>> Datum: Donnerstag, 14. März 2013 17:14
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> An: Tobias Honacker <t.honacker at googlemail.com>
>>>>>>>>>>>>>> Cc: <users at lists.opennebula.org>, <
>>>>>>>>>>>>>> users-owner at lists.opennebula.org>
>>>>>>>>>>>>>> Betreff: Re: [one-users] Onevm in Failed state
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> i installed Ubuntu 12.04 OS......
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> for 2) is it ok now to go to the created template and click
>>>>>>>>>>>>>> update properties and edit the features given by you there directly????
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Thu, Mar 14, 2013 at 9:40 PM, Tobias Honacker <
>>>>>>>>>>>>>> t.honacker at googlemail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --> 1. which OS did you install?
>>>>>>>>>>>>>>> --> 2. Try to enable ACPI in the feature section when you
>>>>>>>>>>>>>>> create a template or update your template with:
>>>>>>>>>>>>>>> FEATURES=[
>>>>>>>>>>>>>>> ACPI="yes" ]
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Best regards,
>>>>>>>>>>>>>>> Tobias
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Von: Preetham Nagaraju <preetham.nagaraju at gmail.com>
>>>>>>>>>>>>>>> Datum: Donnerstag, 14. März 2013 16:54
>>>>>>>>>>>>>>> An: Tobias Honacker <t.honacker at googlemail.com>
>>>>>>>>>>>>>>> Cc: <users at lists.opennebula.org>, <
>>>>>>>>>>>>>>> users-owner at lists.opennebula.org>
>>>>>>>>>>>>>>> Betreff: Re: [one-users] Onevm in Failed state
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi Sir,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> You were right, it was the bridge problem..... I sorted it
>>>>>>>>>>>>>>> out.... Now i am able to create VM successfully... It is in "running"
>>>>>>>>>>>>>>> state......
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Sir after running the vm, we click on vnc to open a new
>>>>>>>>>>>>>>> tab of created vm and first it asks for installing OS.... i proceeded with
>>>>>>>>>>>>>>> all that and got successfully installed the OS.... But the vm is in
>>>>>>>>>>>>>>> *"CLI" mode* and not in the desktop or graphics mode......
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> *Could you please guide:*-
>>>>>>>>>>>>>>> 1. how to open the *VM in graphics mode* with the desktop
>>>>>>>>>>>>>>> view and not this CLI mode......
>>>>>>>>>>>>>>> 2. If we *shutdown the vm not able to start it again.*...
>>>>>>>>>>>>>>> i need to cancel it and start instantiate again the template which will
>>>>>>>>>>>>>>> give new vm and start installing os again.... how to shutdown created vm
>>>>>>>>>>>>>>> and start back again?????
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Thu, Mar 14, 2013 at 4:40 PM, Tobias Honacker <
>>>>>>>>>>>>>>> t.honacker at googlemail.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Did u create a bridge named "br0"?
>>>>>>>>>>>>>>>> Please provide the output of ifconfig –a
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> It could also be a permission problem, follow these guide
>>>>>>>>>>>>>>>> [1] and provide us the output of:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> grep -vE '^($|#)' /etc/libvirt/qemu.conf
>>>>>>>>>>>>>>>> grep -vE '^($|#)' /etc/libvirt/libvirtd.conf
>>>>>>>>>>>>>>>> cat /var/lib/one/var/datastores/0/10/deployment.1
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Best regards,
>>>>>>>>>>>>>>>> Tobias
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Von: Preetham Nagaraju <preetham.nagaraju at gmail.com>
>>>>>>>>>>>>>>>> Datum: Donnerstag, 14. März 2013 12:01
>>>>>>>>>>>>>>>> An: <users at lists.opennebula.org>, <
>>>>>>>>>>>>>>>> users-owner at lists.opennebula.org>
>>>>>>>>>>>>>>>> Betreff: [one-users] Onevm in Failed state
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Hi
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I am using Opennebula 3.8.3 on Ubuntu with KVM
>>>>>>>>>>>>>>>> hypervisor in it.
>>>>>>>>>>>>>>>> I added the host successfully, and created the image and
>>>>>>>>>>>>>>>> template.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> But the virtual machine starts with pending, prolog , boot
>>>>>>>>>>>>>>>> and then goes to failed state......
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Please get me out of this failed state.......
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> VM information is as follows:-
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Virtual Machine information - one-10 ID 10 Name one-10
>>>>>>>>>>>>>>>> Owner preetham Group users State FAILED LCM State
>>>>>>>>>>>>>>>> LCM_INIT Host -- Start time 16:02:14 03/14/2013 Deploy
>>>>>>>>>>>>>>>> ID - Permissions
>>>>>>>>>>>>>>>> Owner um- Group --- Other --- Monitoring
>>>>>>>>>>>>>>>> information Net_TX 0 Net_RX 0 Used Memory 0K Used CPU
>>>>>>>>>>>>>>>> 0 VNC Session [image: VNC Disabled]
>>>>>>>>>>>>>>>> My Vm template is as follows:-
>>>>>>>>>>>>>>>> VM template VCPU 1 NIC
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> MAC 02:00:c0:a8:96:67 NETWORK_ID 1 VLAN NO
>>>>>>>>>>>>>>>> NETWORK_UNAME oneadmin BRIDGE br0 NETWORK localhost IP
>>>>>>>>>>>>>>>> 192.168.150.103
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> ERROR
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> TIMESTAMP Thu Mar 14 16:16:41 2013 MESSAGE Error
>>>>>>>>>>>>>>>> deploying virtual machine: Could not create domain from
>>>>>>>>>>>>>>>> /var/lib/one/var//datastores/0/10/deployment.1
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> VMID 10 RAW
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> TYPE kvm
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> NAME one-10 DISK
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> 0
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> DATASTORE user_ds TYPE CDROM TARGET hdb SAVE NO IMAGE
>>>>>>>>>>>>>>>> cd-Ubuntu-precise DISK_ID 0 DEV_PREFIX hd CLONE YES
>>>>>>>>>>>>>>>> SOURCE
>>>>>>>>>>>>>>>> /var/lib/one/var/datastores/100/c2d97c815b985bece0b710a0675d1bb9
>>>>>>>>>>>>>>>> IMAGE_UNAME preetham IMAGE_ID 11 READONLY YES TM_MAD
>>>>>>>>>>>>>>>> shared DATASTORE_ID 100
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> 1
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> DATASTORE user_ds TYPE FILE TARGET hda SAVE YES
>>>>>>>>>>>>>>>> PERSISTENT YES IMAGE Ubuntu-precise DISK_ID 1 DEV_PREFIX
>>>>>>>>>>>>>>>> hd CLONE NO SOURCE
>>>>>>>>>>>>>>>> /var/lib/one/var/datastores/100/c1e8082f7e34c0cc91254c086f9b72de
>>>>>>>>>>>>>>>> IMAGE_UNAME preetham IMAGE_ID 12 READONLY NO TM_MAD
>>>>>>>>>>>>>>>> shared DATASTORE_ID 100
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> OS
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> ARCH x86_64 BOOT cdrom
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> MEMORY 1024 CPU 1 TEMPLATE_ID 11 GRAPHICS
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> TYPE vnc PORT 5910 KEYMAP es
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> My vm log is as follows:-
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Thu Mar 14 16:02:37 2013 [DiM][I]: New VM state is ACTIVE.
>>>>>>>>>>>>>>>> Thu Mar 14 16:02:37 2013 [LCM][I]: New VM state is PROLOG.
>>>>>>>>>>>>>>>> Thu Mar 14 16:02:37 2013 [VM][I]: Virtual Machine has no context
>>>>>>>>>>>>>>>> Thu Mar 14 16:03:08 2013 [TM][I]: clone: Cloning /var/lib/one/var/datastores/100/c2d97c815b985bece0b710a0675d1bb9 in opennebula:/var/lib/one/var//datastores/0/10/disk.0
>>>>>>>>>>>>>>>> Thu Mar 14 16:03:08 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>>>>>> Thu Mar 14 16:03:09 2013 [TM][I]: ln: Linking /var/lib/one/var/datastores/100/c1e8082f7e34c0cc91254c086f9b72de in opennebula:/var/lib/one/var//datastores/0/10/disk.1
>>>>>>>>>>>>>>>> Thu Mar 14 16:03:09 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>>>>>> Thu Mar 14 16:03:09 2013 [LCM][I]: New VM state is BOOT
>>>>>>>>>>>>>>>> Thu Mar 14 16:03:09 2013 [VMM][I]: Generating deployment file: /var/lib/one/var/vms/10/deployment.0
>>>>>>>>>>>>>>>> Thu Mar 14 16:03:10 2013 [VMM][I]: ExitCode: 0
>>>>>>>>>>>>>>>> Thu Mar 14 16:03:10 2013 [VMM][I]: Successfully execute network driver operation: pre.
>>>>>>>>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: Command execution fail: cat << EOT | /var/tmp/one/vmm/kvm/deploy /var/lib/one/var//datastores/0/10/deployment.0 opennebula 10 opennebula
>>>>>>>>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: error: Failed to create domain from /var/lib/one/var//datastores/0/10/deployment.0
>>>>>>>>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: error: Cannot get interface MTU on 'br0': No such deviceThu Mar 14 16:03:13 2013 [VMM][E]: Could not create domain from /var/lib/one/var//datastores/0/10/deployment.0
>>>>>>>>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: ExitCode: 255
>>>>>>>>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: Failed to execute virtualization driver operation: deploy.Thu Mar 14 16:03:13 2013 [VMM][E]: Error deploying virtual machine: Could not create domain from /var/lib/one/var//datastores/0/10/deployment.0
>>>>>>>>>>>>>>>> Thu Mar 14 16:03:13 2013 [DiM][I]: New VM state is FAILED
>>>>>>>>>>>>>>>> Thu Mar 14 16:16:04 2013 [DiM][I]: New VM state is CLEANUP.
>>>>>>>>>>>>>>>> Thu Mar 14 16:16:04 2013 [TM][I]: delete: Deleting /var/lib/one/var/datastores/0/10/disk.0
>>>>>>>>>>>>>>>> Thu Mar 14 16:16:04 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>>>>>> Thu Mar 14 16:16:04 2013 [TM][I]: delete: Deleting /var/lib/one/var/datastores/0/10/disk.1
>>>>>>>>>>>>>>>> Thu Mar 14 16:16:04 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>>>>>> Thu Mar 14 16:16:05 2013 [TM][I]: delete: Deleting /var/lib/one/var/datastores/0/10
>>>>>>>>>>>>>>>> Thu Mar 14 16:16:05 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>>>>>> Thu Mar 14 16:16:05 2013 [DiM][I]: New VM state is PENDING
>>>>>>>>>>>>>>>> Thu Mar 14 16:16:10 2013 [DiM][I]: New VM state is ACTIVE.
>>>>>>>>>>>>>>>> Thu Mar 14 16:16:10 2013 [LCM][I]: New VM state is PROLOG.
>>>>>>>>>>>>>>>> Thu Mar 14 16:16:10 2013 [VM][I]: Virtual Machine has no context
>>>>>>>>>>>>>>>> Thu Mar 14 16:16:36 2013 [TM][I]: clone: Cloning /var/lib/one/var/datastores/100/c2d97c815b985bece0b710a0675d1bb9 in opennebula:/var/lib/one/var//datastores/0/10/disk.0
>>>>>>>>>>>>>>>> Thu Mar 14 16:16:36 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>>>>>> Thu Mar 14 16:16:38 2013 [TM][I]: ln: Linking /var/lib/one/var/datastores/100/c1e8082f7e34c0cc91254c086f9b72de in opennebula:/var/lib/one/var//datastores/0/10/disk.1
>>>>>>>>>>>>>>>> Thu Mar 14 16:16:38 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>>>>>> Thu Mar 14 16:16:38 2013 [LCM][I]: New VM state is BOOT
>>>>>>>>>>>>>>>> Thu Mar 14 16:16:38 2013 [VMM][I]: Generating deployment file: /var/lib/one/var/vms/10/deployment.1
>>>>>>>>>>>>>>>> Thu Mar 14 16:16:39 2013 [VMM][I]: ExitCode: 0
>>>>>>>>>>>>>>>> Thu Mar 14 16:16:39 2013 [VMM][I]: Successfully execute network driver operation: pre.
>>>>>>>>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: Command execution fail: cat << EOT | /var/tmp/one/vmm/kvm/deploy /var/lib/one/var//datastores/0/10/deployment.1 opennebula 10 opennebula
>>>>>>>>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: error: Failed to create domain from /var/lib/one/var//datastores/0/10/deployment.1
>>>>>>>>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: error: Cannot get interface MTU on 'br0': No such deviceThu Mar 14 16:16:41 2013 [VMM][E]: Could not create domain from /var/lib/one/var//datastores/0/10/deployment.1
>>>>>>>>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: ExitCode: 255
>>>>>>>>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: Failed to execute virtualization driver operation: deploy.Thu Mar 14 16:16:41 2013 [VMM][E]: Error deploying virtual machine: Could not create domain from /var/lib/one/var//datastores/0/10/deployment.1
>>>>>>>>>>>>>>>> Thu Mar 14 16:16:41 2013 [DiM][I]: New VM state is FAILED
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> *Regards,***
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> *Preetham. N*
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> *
>>>>>>>>>>>>>>>> *
>>>>>>>>>>>>>>>> *
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> *
>>>>>>>>>>>>>>>> _______________________________________________ Users
>>>>>>>>>>>>>>>> mailing list Users at lists.opennebula.org
>>>>>>>>>>>>>>>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> *?** Regards,***
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> *Preetham. N*
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> *9945072638*
>>>>>>>>>>>>>>> *
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> *
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> *?** Regards,***
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> *Preetham. N*
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> *9945072638*
>>>>>>>>>>>>>> *
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> *
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>>
>>>>>>>>>>>>> *?** Regards,***
>>>>>>>>>>>>>
>>>>>>>>>>>>> *Preetham. N*
>>>>>>>>>>>>>
>>>>>>>>>>>>> *9945072638*
>>>>>>>>>>>>> *
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> *
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>>
>>>>>>>>>>>> *?** Regards,***
>>>>>>>>>>>>
>>>>>>>>>>>> *Preetham. N*
>>>>>>>>>>>>
>>>>>>>>>>>> *9945072638*
>>>>>>>>>>>> *
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> *
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>>
>>>>>>>>>>> *?** Regards,***
>>>>>>>>>>>
>>>>>>>>>>> *Preetham. N*
>>>>>>>>>>>
>>>>>>>>>>> *9945072638*
>>>>>>>>>>> *
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> *
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> Users mailing list
>>>>>>>>>>> Users at lists.opennebula.org
>>>>>>>>>>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>>
>>>>>>>>> *?** Regards,***
>>>>>>>>>
>>>>>>>>> *Preetham. N*
>>>>>>>>>
>>>>>>>>> *9945072638*
>>>>>>>>> *
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> *
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>>
>>>>>>> *?** Regards,***
>>>>>>>
>>>>>>> *Preetham. N*
>>>>>>>
>>>>>>> *9945072638*
>>>>>>> *
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> *
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>>
>>>>> *?** Regards,***
>>>>>
>>>>> *Preetham. N*
>>>>>
>>>>> *9945072638*
>>>>> *
>>>>>
>>>>>
>>>>>
>>>>> *
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>>
>>>> *?** Regards,***
>>>>
>>>> *Preetham. N*
>>>>
>>>> *9945072638*
>>>> *
>>>>
>>>>
>>>>
>>>> *
>>>>
>>>
>>>
>>>
>>> --
>>>
>>> *?** Regards,***
>>>
>>> *Preetham. N*
>>>
>>> *9945072638*
>>> *
>>>
>>>
>>>
>>> *
>>>
>>
>>
>>
>> --
>>
>> *?** Regards,***
>>
>> *Preetham. N*
>>
>> *9945072638*
>> *
>>
>>
>>
>> *
>>
>
>
--
*?** Regards,***
*Preetham. N*
*9945072638*
*
*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20130419/735222d3/attachment-0002.htm>
More information about the Users
mailing list