[one-users] Onevm in Failed state

Preetham Nagaraju preetham.nagaraju at gmail.com
Mon Apr 22 10:12:49 PDT 2013 

Hi Sir,

           Is that, i need to give the whole kernel name what i get in the
grub file of the host m/c under kernal tab and what the command i need to
give???? under kernel_cmd????

My host m/c has *Ubuntu 12.04 desktop os with XEN hypervisor* in it....


On Fri, Apr 19, 2013 at 11:47 PM, Preetham Nagaraju <
preetham.nagaraju at gmail.com> wrote:

> Hi Sir,
>
> I got to know from the document that Kernel, Kernel_DS & Bootloader are
> mandatory..... *But i am not getting what parameter i need to specify
> there*...
> From the document they have given:-
>
> OS = [ KERNEL     = /vmlinuz,  --what i need to give here & from where i will get
>        INITRD     = /initrd.img,
>        ROOT       = sda1,
>        KERNEL_CMD = "ro xencons=tty console=tty1"]
>
> OS = [ KERNEL_DS  = "$FILE[IMAGE=\"kernel 3.6\"]",
>        INITRD_DS  = "$FILE[IMAGE=\"initrd 3.6\"]",
>        ROOT       = sda1,
>        KERNEL_CMD = "ro xencons=tty console=tty1"
>
>
> But i am not getting what name i need to enter under kernel, kernel_cmd &
> root tab.... My host m/c has Ubuntu 12.04 os and XEN hypervisor....
>
>
> On Fri, Apr 19, 2013 at 8:23 PM, Carlos Martín Sánchez <
> cmartin at opennebula.org> wrote:
>
>> Hi,
>>
>> Here are some references about these attributes:
>>
>> http://opennebula.org/documentation:rel4.0:template#os_and_boot_options_section
>> http://opennebula.org/documentation:rel4.0:xeng#usage
>>
>> Regards
>>
>> --
>> Carlos Martín, MSc
>> Project Engineer
>> OpenNebula - The Open-source Solution for Data Center Virtualization
>> www.OpenNebula.org | cmartin at opennebula.org | @OpenNebula<http://twitter.com/opennebula><cmartin at opennebula.org>
>>
>>
>> On Fri, Apr 19, 2013 at 3:53 PM, Preetham Nagaraju <
>> preetham.nagaraju at gmail.com> wrote:
>>
>>> *Hi Sir,*
>>>
>>> From failed vm log file, i got to know that *"i need to specify Kernel
>>> & Bootloader"* at the time of creating VM template --- under OS Booting
>>> tab.....
>>>
>>> But what parameters i need to specify there, since i want to create
>>> Ubuntu desktop os as my guest os vm....i.e what should i specify under :-
>>> *Boot, Root, Kernel cmd, Bootloader,  Kernel tab & Ramdisk tab's........
>>> *
>>>
>>> I will be uploading image of *"**Ubuntu 12.04 desktop.iso"* os and
>>> after it comes to Ready state, i will start creating VM Template.... Please
>>> guide me what the paramenters to be entered in the vm template tab's for
>>> creating ubuntu as guest os......
>>>
>>>
>>> On Thu, Apr 18, 2013 at 4:36 PM, Preetham Nagaraju <
>>> preetham.nagaraju at gmail.com> wrote:
>>>
>>>>
>>>> Hi,
>>>>
>>>> Not able to create vm's from marketplace images nor directly uploading
>>>> the images, in the 2 host m/c which has Ubuntu 12.04 OS & XEN
>>>> hypervisor..... where xend daemon is also running....
>>>>
>>>> Please guide me how to create vm's in 2nd host m/c and make them
>>>> "Running" .....
>>>>
>>>>
>>>> On Thu, Apr 18, 2013 at 4:31 PM, Preetham Nagaraju <
>>>> preetham.nagaraju at gmail.com> wrote:
>>>>
>>>>> Hi,
>>>>>
>>>>> If i try to import OS which supports xen i.e. Debian Squeeze-xen image
>>>>> also, the vm created using this image also goes to "Failed" state...
>>>>>
>>>>>
>>>>> On Thu, Apr 18, 2013 at 12:48 PM, Preetham Nagaraju <
>>>>> preetham.nagaraju at gmail.com> wrote:
>>>>>
>>>>>> *Hi Sir,*
>>>>>>
>>>>>> You were right sir, it was ttylinux-kvm image i was using.....
>>>>>>
>>>>>> Since i have 2 m/c's with 2 different hypervisor's, i am not getting
>>>>>> any image common to both in Marketplace....
>>>>>>
>>>>>> So i downloaded Ubuntu 12.04 desktop.iso os and directly uploaded the
>>>>>> image.....
>>>>>> Went directly to "Image" tab selected "Create" and "Uploaded" the
>>>>>> downloaded image by giving the path... Image was uploaded successfully....
>>>>>>
>>>>>> Then created "Template" with updating info in "General, Storage,
>>>>>> Network, Input/Output" tabs... Template was created.....
>>>>>>
>>>>>> And then gave Instantiate with vm's as 2 but the vm in 2nd node is
>>>>>> same in* "Failed"* state..... Please find the attachment for failed
>>>>>> vm log file....
>>>>>>
>>>>>> And also vm in the 1st node is in "Running" state but there is
>>>>>> network in it... i.e internet is not working....
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Wed, Apr 17, 2013 at 10:23 PM, Carlos Martín Sánchez <
>>>>>> cmartin at opennebula.org> wrote:
>>>>>>
>>>>>>> Can you doble-check that? I can only see ttylinux appliances for kvm
>>>>>>> and vmware.
>>>>>>>
>>>>>>> --
>>>>>>> Carlos Martín, MSc
>>>>>>> Project Engineer
>>>>>>> OpenNebula - The Open-source Solution for Data Center Virtualization
>>>>>>> www.OpenNebula.org | cmartin at opennebula.org | @OpenNebula<http://twitter.com/opennebula><cmartin at opennebula.org>
>>>>>>>
>>>>>>>
>>>>>>> On Wed, Apr 17, 2013 at 6:38 PM, Preetham Nagaraju <
>>>>>>> preetham.nagaraju at gmail.com> wrote:
>>>>>>>
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>> But i am importing the ttylinux-xen image only from
>>>>>>>> Marketplace......
>>>>>>>>
>>>>>>>>
>>>>>>>> On Wed, Apr 17, 2013 at 9:12 PM, Carlos Martín Sánchez <
>>>>>>>> cmartin at opennebula.org> wrote:
>>>>>>>>
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> OpenNebula will not convert the KVM ttylinux VM to a Xen ready VM.
>>>>>>>>> You need to create or import a xen-ready VM.
>>>>>>>>>
>>>>>>>>> Regards
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> Carlos Martín, MSc
>>>>>>>>> Project Engineer
>>>>>>>>> OpenNebula - The Open-source Solution for Data Center
>>>>>>>>> Virtualization
>>>>>>>>> www.OpenNebula.org | cmartin at opennebula.org | @OpenNebula<http://twitter.com/opennebula><cmartin at opennebula.org>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Wed, Apr 17, 2013 at 4:15 PM, Preetham Nagaraju <
>>>>>>>>> preetham.nagaraju at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> *Hi Sir,*
>>>>>>>>>>
>>>>>>>>>> Firstly, i have installed *Opennebula 3.9.80 on Ubuntu 12.04 OS
>>>>>>>>>> which has KVM hypervisor* in it. I am using this machine as *both
>>>>>>>>>> Fontend & Host/Node* machine. In this, Opennebula is working
>>>>>>>>>> fine & the same m/c as node/host is also working fine i.e this host m/c in
>>>>>>>>>> opennebula is in *"ON"* state.
>>>>>>>>>>
>>>>>>>>>> Further i have another host m/c i.e *2nd host m/c which has
>>>>>>>>>> Ubuntu12.04 OS with XEN hypervisor*.. From the 1st m/c i can ssh
>>>>>>>>>> passwordless to 2nd m/c & vice-versa and also automount from 1st m/c to 2nd
>>>>>>>>>> m/c.... This 2nd host m/c is also added successfully to opennebula and it
>>>>>>>>>> is also in *"ON"* state....
>>>>>>>>>>
>>>>>>>>>> *oneadmin at opennebula:~$* *onehost list*
>>>>>>>>>>
>>>>>>>>>>   ID NAME            CLUSTER   RVM      ALLOCATED_CPU
>>>>>>>>>> ALLOCATED_MEM STAT
>>>>>>>>>>    8 opennebula      -           0       0 / 200 (0%)   0K /
>>>>>>>>>> 991.8M (0%) on                        -----------------   1st host m/c(KVM)
>>>>>>>>>>   16 node1           -           0       0 / 200 (0%)       0K /
>>>>>>>>>> 2G (0%) on                            -----------------   2nd host m/c(XEN)
>>>>>>>>>>
>>>>>>>>>> After adding the host m/c's, further for creating VM's firstly i
>>>>>>>>>> imported the ttylinux (for eg.) from "Marketplace" and when it came to
>>>>>>>>>> "Ready" state, created the "Template".....
>>>>>>>>>>
>>>>>>>>>> *oneadmin at opennebula:~$ onetemplate list*
>>>>>>>>>>   ID USER            GROUP
>>>>>>>>>> NAME                                REGTIME
>>>>>>>>>>    4 oneadmin        oneadmin        tty-linux
>>>>>>>>>> 04/16 11:22:24
>>>>>>>>>>
>>>>>>>>>> After creating the template, gave "Instantiate" and selected the
>>>>>>>>>> created template and gave No. vm's to deploy as 2...
>>>>>>>>>> VM's got created but the VM in the 2nd host m/c is in *"Fail"*state whereas the VM in the 1st host m/c is in "Running" state....
>>>>>>>>>>
>>>>>>>>>> *oneadmin at opennebula:~$ onevm list*
>>>>>>>>>>     ID USER     GROUP    NAME            STAT UCPU    UMEM
>>>>>>>>>> HOST             TIME
>>>>>>>>>>     10 oneadmin oneadmin ttylinux-vm     fail    0
>>>>>>>>>> 0K              0d 00h00                  -----------------
>>>>>>>>>> 2nd host m/c(XEN)
>>>>>>>>>>      11 oneadmin oneadmin ttylinux-vm     runn    0      0K
>>>>>>>>>> opennebula   0d 00h00         -----------------   1st host
>>>>>>>>>> m/c(KVM)
>>>>>>>>>>
>>>>>>>>>> Sir, please guide me where i have done mistake or gone wrong from
>>>>>>>>>> the above, and help me out to come out from vm "Failed" state in the 2nd
>>>>>>>>>> host m/c which has XEN hypervisor in it.....
>>>>>>>>>>
>>>>>>>>>> Sir, i have also updated the "sudoers" in the opennebula m/c i.e
>>>>>>>>>> 1st host m/c and also in the 2nd host m/c... with giving all privileges....
>>>>>>>>>>
>>>>>>>>>> *%oneadmin    ALL=(ALL)   NOPASSWD: ALL
>>>>>>>>>>
>>>>>>>>>> %xen ALL=(ALL) NOPASSWD: /usr/sbin/xm *
>>>>>>>>>> **%xen ALL=(ALL) NOPASSWD: /usr/sbin/xentop **
>>>>>>>>>> *
>>>>>>>>>> *
>>>>>>>>>> And also have "uncommented" the drivers line in oned.config file
>>>>>>>>>> for both KVM & XEN with dummy also.....
>>>>>>>>>> *
>>>>>>>>>> *
>>>>>>>>>> Sir, please find the logs in the attachment.....
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Wed, Apr 17, 2013 at 2:55 PM, Carlos Martín Sánchez <
>>>>>>>>>> cmartin at opennebula.org> wrote:
>>>>>>>>>>
>>>>>>>>>>> Hi,
>>>>>>>>>>>
>>>>>>>>>>> You may find the reason in the opennebula logs, see
>>>>>>>>>>> /var/log/one/oned.log and vm-id.log; or in the xen logs in the host.
>>>>>>>>>>> But if I understood your configuration, you are trying to run a
>>>>>>>>>>> KVM machine on Xen.
>>>>>>>>>>>
>>>>>>>>>>> Regards
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> Carlos Martín, MSc
>>>>>>>>>>> Project Engineer
>>>>>>>>>>> OpenNebula - The Open-source Solution for Data Center
>>>>>>>>>>> Virtualization
>>>>>>>>>>> www.OpenNebula.org | cmartin at opennebula.org | @OpenNebula<http://twitter.com/opennebula><cmartin at opennebula.org>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Mon, Apr 15, 2013 at 11:26 AM, Preetham Nagaraju <
>>>>>>>>>>> preetham.nagaraju at gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hi Sir,
>>>>>>>>>>>>
>>>>>>>>>>>> Now i have added two host machines to Opennebula. First host
>>>>>>>>>>>> m/c is the opennebula frontend itself and the other m/c which has Ubuntu
>>>>>>>>>>>> 12.04 & XEN hypervisor in it.... Both the host's are in "Running" i.e "ON"
>>>>>>>>>>>> state...
>>>>>>>>>>>>
>>>>>>>>>>>> Then i am trying to create VM in these host m/c's. After
>>>>>>>>>>>> uploading image & creating template, if i give "Instantiate" and give no.
>>>>>>>>>>>> of deploy vm as :- 2 , two vm's must be created!!!!!
>>>>>>>>>>>>
>>>>>>>>>>>> *2 vm's are creating in two host m/c's* but the *vm in the
>>>>>>>>>>>> second node* i.e Ubuntu 12.04 with XEN which is other than
>>>>>>>>>>>> opennebula frontend m/c is going to *"FAILED" state,* but the
>>>>>>>>>>>> vm created in the opennebula frontend m/c i.e first host, is in "RUNNING"
>>>>>>>>>>>> state....
>>>>>>>>>>>>
>>>>>>>>>>>> From the frontend m/c i can ssh passwordless to the second m/c
>>>>>>>>>>>> and vice-versa also successfully....
>>>>>>>>>>>>
>>>>>>>>>>>> sir please help me how to get the vm in "RUNNING" state in the
>>>>>>>>>>>> 2nd m/c...
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Thu, Mar 14, 2013 at 11:27 PM, Preetham Nagaraju <
>>>>>>>>>>>> preetham.nagaraju at gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> for (1) VNC viewer on local pc means on the host machine
>>>>>>>>>>>>> sir....if it is so then i haven't installed VNC viewer on host machine, at
>>>>>>>>>>>>> the time of installing openneula i installed noVNC_gems tat's all....
>>>>>>>>>>>>>
>>>>>>>>>>>>> for (2), i will run that command after creating vm, but i have
>>>>>>>>>>>>> doubt that since we are creating the vm from template whether it can store
>>>>>>>>>>>>> the vm or it will get deleted after the vm is shutdown... that's the
>>>>>>>>>>>>> behaviour of vm after creating it by template right sir!!!!!
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Thu, Mar 14, 2013 at 11:17 PM, Tobias Honacker <
>>>>>>>>>>>>> t.honacker at googlemail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>>  Hi,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --> 2. After creating the VM and the OS is installed run sudo
>>>>>>>>>>>>>> apt-get install acpid on it (VM)
>>>>>>>>>>>>>> --> 1. did you install any VNC viewer on your local pc?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Best regards,
>>>>>>>>>>>>>> Tobias
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Am 14.03.2013 18:28, schrieb Preetham Nagaraju:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi sir,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>           i think for my first question (1) i need to make
>>>>>>>>>>>>>> clear.... Desktop means not the desktop version of Ubuntu OS, now i am able
>>>>>>>>>>>>>> to access the vm in command line's and not in the GUI mode..... i am able
>>>>>>>>>>>>>> to host vm, but it is opening in command line mode and not in the gui.....
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>  and also for the reply by you for (2)  "sudo apt-get
>>>>>>>>>>>>>> install acpid" i need to run this command in the host machine or after
>>>>>>>>>>>>>> creating the vm i need to run this command....????
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Thu, Mar 14, 2013 at 10:26 PM, Tobias Honacker <
>>>>>>>>>>>>>> t.honacker at googlemail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>  Hi,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>  --> 1. You have to download Ubuntu Desktop ISO  to run
>>>>>>>>>>>>>>> Desktop after the installation is done
>>>>>>>>>>>>>>> Never installed any desktop on my servers yet but you can
>>>>>>>>>>>>>>> try this link [1].
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>  --> 2. Not 100% sure but try to update the template and
>>>>>>>>>>>>>>> shutdown the vm so changes can take effect. If not deploy a new VM.
>>>>>>>>>>>>>>> Also install the acpi daemon on your VM:
>>>>>>>>>>>>>>> sudo apt-get install acpid
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>  This should help.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>  Best regards,
>>>>>>>>>>>>>>> Tobias
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>  [1]
>>>>>>>>>>>>>>> http://www.filiwiese.com/installing-gnome-on-ubuntu-12-04-precise-pangolin/
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>   Von: Preetham Nagaraju <preetham.nagaraju at gmail.com>
>>>>>>>>>>>>>>> Datum: Donnerstag, 14. März 2013 17:14
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> An: Tobias Honacker <t.honacker at googlemail.com>
>>>>>>>>>>>>>>> Cc: <users at lists.opennebula.org>, <
>>>>>>>>>>>>>>> users-owner at lists.opennebula.org>
>>>>>>>>>>>>>>> Betreff: Re: [one-users] Onevm in Failed state
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>  i installed Ubuntu 12.04 OS......
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>  for 2) is it ok now to go to the created template and
>>>>>>>>>>>>>>> click update properties and edit the features given by you there
>>>>>>>>>>>>>>> directly????
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Thu, Mar 14, 2013 at 9:40 PM, Tobias Honacker <
>>>>>>>>>>>>>>> t.honacker at googlemail.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>  Hi,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>  --> 1. which OS did you install?
>>>>>>>>>>>>>>>> --> 2. Try to enable ACPI in the feature section when you
>>>>>>>>>>>>>>>> create a template or update your template with:
>>>>>>>>>>>>>>>> FEATURES=[
>>>>>>>>>>>>>>>>   ACPI="yes" ]
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>  Best regards,
>>>>>>>>>>>>>>>> Tobias
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>   Von: Preetham Nagaraju <preetham.nagaraju at gmail.com>
>>>>>>>>>>>>>>>> Datum: Donnerstag, 14. März 2013 16:54
>>>>>>>>>>>>>>>> An: Tobias Honacker <t.honacker at googlemail.com>
>>>>>>>>>>>>>>>> Cc: <users at lists.opennebula.org>, <
>>>>>>>>>>>>>>>> users-owner at lists.opennebula.org>
>>>>>>>>>>>>>>>> Betreff: Re: [one-users] Onevm in Failed state
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>  Hi Sir,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>  You were right, it was the bridge problem..... I sorted
>>>>>>>>>>>>>>>> it out.... Now i am able to create VM successfully... It is in "running"
>>>>>>>>>>>>>>>> state......
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>  Sir after running the vm, we click on vnc to open a new
>>>>>>>>>>>>>>>> tab of created vm and first it asks for installing OS.... i proceeded with
>>>>>>>>>>>>>>>> all that and got successfully installed the OS.... But the vm is in
>>>>>>>>>>>>>>>> *"CLI" mode* and not in the desktop or graphics mode......
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>  *Could you please guide:*-
>>>>>>>>>>>>>>>> 1. how to open the *VM in graphics mode* with the desktop
>>>>>>>>>>>>>>>> view and not this CLI mode......
>>>>>>>>>>>>>>>>    2. If we *shutdown the vm not able to start it again.*...
>>>>>>>>>>>>>>>> i need to cancel it and start instantiate again the template which will
>>>>>>>>>>>>>>>> give new vm and start installing os again.... how to shutdown created vm
>>>>>>>>>>>>>>>> and start back again?????
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>   On Thu, Mar 14, 2013 at 4:40 PM, Tobias Honacker <
>>>>>>>>>>>>>>>> t.honacker at googlemail.com> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>   Hi,
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>  Did u create a bridge named "br0"?
>>>>>>>>>>>>>>>>> Please provide the output of ifconfig –a
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>  It could also be a permission problem, follow these
>>>>>>>>>>>>>>>>> guide [1] and provide us the output of:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>  grep -vE '^($|#)' /etc/libvirt/qemu.conf
>>>>>>>>>>>>>>>>> grep -vE '^($|#)' /etc/libvirt/libvirtd.conf
>>>>>>>>>>>>>>>>> cat /var/lib/one/var/datastores/0/10/deployment.1
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>  Best regards,
>>>>>>>>>>>>>>>>>  Tobias
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>     Von: Preetham Nagaraju <preetham.nagaraju at gmail.com>
>>>>>>>>>>>>>>>>> Datum: Donnerstag, 14. März 2013 12:01
>>>>>>>>>>>>>>>>> An: <users at lists.opennebula.org>, <
>>>>>>>>>>>>>>>>> users-owner at lists.opennebula.org>
>>>>>>>>>>>>>>>>> Betreff: [one-users] Onevm in Failed state
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>  Hi
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>       I am using Opennebula 3.8.3 on Ubuntu with KVM
>>>>>>>>>>>>>>>>> hypervisor in it.
>>>>>>>>>>>>>>>>> I added the host successfully, and created the image and
>>>>>>>>>>>>>>>>> template.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> But the virtual machine starts with pending, prolog , boot
>>>>>>>>>>>>>>>>> and then goes to failed state......
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Please get me out of this failed state.......
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> VM information is as follows:-
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>   Virtual Machine information - one-10   ID 10  Name
>>>>>>>>>>>>>>>>> one-10  Owner preetham  Group users  State FAILED  LCM
>>>>>>>>>>>>>>>>> State LCM_INIT  Host --  Start time 16:02:14 03/14/2013  Deploy
>>>>>>>>>>>>>>>>> ID -  Permissions
>>>>>>>>>>>>>>>>>        Owner um-       Group ---       Other ---    Monitoring
>>>>>>>>>>>>>>>>> information   Net_TX 0  Net_RX 0  Used Memory 0K  Used CPU
>>>>>>>>>>>>>>>>> 0  VNC Session [image: VNC Disabled]
>>>>>>>>>>>>>>>>> My Vm template is as follows:-
>>>>>>>>>>>>>>>>>  VM template   VCPU 1  NIC
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>   MAC 02:00:c0:a8:96:67  NETWORK_ID 1  VLAN NO
>>>>>>>>>>>>>>>>> NETWORK_UNAME oneadmin  BRIDGE br0  NETWORK localhost  IP
>>>>>>>>>>>>>>>>> 192.168.150.103
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>   ERROR
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>   TIMESTAMP Thu Mar 14 16:16:41 2013  MESSAGE Error
>>>>>>>>>>>>>>>>> deploying virtual machine: Could not create domain from
>>>>>>>>>>>>>>>>> /var/lib/one/var//datastores/0/10/deployment.1
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>   VMID 10  RAW
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>   TYPE kvm
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>   NAME one-10  DISK
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>   0
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>   DATASTORE user_ds  TYPE CDROM  TARGET hdb  SAVE NO
>>>>>>>>>>>>>>>>> IMAGE cd-Ubuntu-precise  DISK_ID 0  DEV_PREFIX hd  CLONE
>>>>>>>>>>>>>>>>> YES  SOURCE
>>>>>>>>>>>>>>>>> /var/lib/one/var/datastores/100/c2d97c815b985bece0b710a0675d1bb9
>>>>>>>>>>>>>>>>> IMAGE_UNAME preetham  IMAGE_ID 11  READONLY YES  TM_MAD
>>>>>>>>>>>>>>>>> shared  DATASTORE_ID 100
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>   1
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>   DATASTORE user_ds  TYPE FILE  TARGET hda  SAVE YES
>>>>>>>>>>>>>>>>> PERSISTENT YES  IMAGE Ubuntu-precise  DISK_ID 1
>>>>>>>>>>>>>>>>> DEV_PREFIX hd  CLONE NO  SOURCE
>>>>>>>>>>>>>>>>> /var/lib/one/var/datastores/100/c1e8082f7e34c0cc91254c086f9b72de
>>>>>>>>>>>>>>>>> IMAGE_UNAME preetham  IMAGE_ID 12  READONLY NO  TM_MAD
>>>>>>>>>>>>>>>>> shared  DATASTORE_ID 100
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>   OS
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>   ARCH x86_64  BOOT cdrom
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>   MEMORY 1024  CPU 1  TEMPLATE_ID 11  GRAPHICS
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>   TYPE vnc  PORT 5910  KEYMAP es
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> My vm log is as follows:-
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Thu Mar 14 16:02:37 2013 [DiM][I]: New VM state is ACTIVE.
>>>>>>>>>>>>>>>>> Thu Mar 14 16:02:37 2013 [LCM][I]: New VM state is PROLOG.
>>>>>>>>>>>>>>>>> Thu Mar 14 16:02:37 2013 [VM][I]: Virtual Machine has no context
>>>>>>>>>>>>>>>>> Thu Mar 14 16:03:08 2013 [TM][I]: clone: Cloning /var/lib/one/var/datastores/100/c2d97c815b985bece0b710a0675d1bb9 in opennebula:/var/lib/one/var//datastores/0/10/disk.0
>>>>>>>>>>>>>>>>> Thu Mar 14 16:03:08 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>>>>>>> Thu Mar 14 16:03:09 2013 [TM][I]: ln: Linking /var/lib/one/var/datastores/100/c1e8082f7e34c0cc91254c086f9b72de in opennebula:/var/lib/one/var//datastores/0/10/disk.1
>>>>>>>>>>>>>>>>> Thu Mar 14 16:03:09 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>>>>>>> Thu Mar 14 16:03:09 2013 [LCM][I]: New VM state is BOOT
>>>>>>>>>>>>>>>>> Thu Mar 14 16:03:09 2013 [VMM][I]: Generating deployment file: /var/lib/one/var/vms/10/deployment.0
>>>>>>>>>>>>>>>>> Thu Mar 14 16:03:10 2013 [VMM][I]: ExitCode: 0
>>>>>>>>>>>>>>>>> Thu Mar 14 16:03:10 2013 [VMM][I]: Successfully execute network driver operation: pre.
>>>>>>>>>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: Command execution fail: cat << EOT | /var/tmp/one/vmm/kvm/deploy /var/lib/one/var//datastores/0/10/deployment.0 opennebula 10 opennebula
>>>>>>>>>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: error: Failed to create domain from /var/lib/one/var//datastores/0/10/deployment.0
>>>>>>>>>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: error: Cannot get interface MTU on 'br0': No such deviceThu Mar 14 16:03:13 2013 [VMM][E]: Could not create domain from /var/lib/one/var//datastores/0/10/deployment.0
>>>>>>>>>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: ExitCode: 255
>>>>>>>>>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: Failed to execute virtualization driver operation: deploy.Thu Mar 14 16:03:13 2013 [VMM][E]: Error deploying virtual machine: Could not create domain from /var/lib/one/var//datastores/0/10/deployment.0
>>>>>>>>>>>>>>>>> Thu Mar 14 16:03:13 2013 [DiM][I]: New VM state is FAILED
>>>>>>>>>>>>>>>>> Thu Mar 14 16:16:04 2013 [DiM][I]: New VM state is CLEANUP.
>>>>>>>>>>>>>>>>> Thu Mar 14 16:16:04 2013 [TM][I]: delete: Deleting /var/lib/one/var/datastores/0/10/disk.0
>>>>>>>>>>>>>>>>> Thu Mar 14 16:16:04 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>>>>>>> Thu Mar 14 16:16:04 2013 [TM][I]: delete: Deleting /var/lib/one/var/datastores/0/10/disk.1
>>>>>>>>>>>>>>>>> Thu Mar 14 16:16:04 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>>>>>>> Thu Mar 14 16:16:05 2013 [TM][I]: delete: Deleting /var/lib/one/var/datastores/0/10
>>>>>>>>>>>>>>>>> Thu Mar 14 16:16:05 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>>>>>>> Thu Mar 14 16:16:05 2013 [DiM][I]: New VM state is PENDING
>>>>>>>>>>>>>>>>> Thu Mar 14 16:16:10 2013 [DiM][I]: New VM state is ACTIVE.
>>>>>>>>>>>>>>>>> Thu Mar 14 16:16:10 2013 [LCM][I]: New VM state is PROLOG.
>>>>>>>>>>>>>>>>> Thu Mar 14 16:16:10 2013 [VM][I]: Virtual Machine has no context
>>>>>>>>>>>>>>>>> Thu Mar 14 16:16:36 2013 [TM][I]: clone: Cloning /var/lib/one/var/datastores/100/c2d97c815b985bece0b710a0675d1bb9 in opennebula:/var/lib/one/var//datastores/0/10/disk.0
>>>>>>>>>>>>>>>>> Thu Mar 14 16:16:36 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>>>>>>> Thu Mar 14 16:16:38 2013 [TM][I]: ln: Linking /var/lib/one/var/datastores/100/c1e8082f7e34c0cc91254c086f9b72de in opennebula:/var/lib/one/var//datastores/0/10/disk.1
>>>>>>>>>>>>>>>>> Thu Mar 14 16:16:38 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>>>>>>> Thu Mar 14 16:16:38 2013 [LCM][I]: New VM state is BOOT
>>>>>>>>>>>>>>>>> Thu Mar 14 16:16:38 2013 [VMM][I]: Generating deployment file: /var/lib/one/var/vms/10/deployment.1
>>>>>>>>>>>>>>>>> Thu Mar 14 16:16:39 2013 [VMM][I]: ExitCode: 0
>>>>>>>>>>>>>>>>> Thu Mar 14 16:16:39 2013 [VMM][I]: Successfully execute network driver operation: pre.
>>>>>>>>>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: Command execution fail: cat << EOT | /var/tmp/one/vmm/kvm/deploy /var/lib/one/var//datastores/0/10/deployment.1 opennebula 10 opennebula
>>>>>>>>>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: error: Failed to create domain from /var/lib/one/var//datastores/0/10/deployment.1
>>>>>>>>>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: error: Cannot get interface MTU on 'br0': No such deviceThu Mar 14 16:16:41 2013 [VMM][E]: Could not create domain from /var/lib/one/var//datastores/0/10/deployment.1
>>>>>>>>>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: ExitCode: 255
>>>>>>>>>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: Failed to execute virtualization driver operation: deploy.Thu Mar 14 16:16:41 2013 [VMM][E]: Error deploying virtual machine: Could not create domain from /var/lib/one/var//datastores/0/10/deployment.1
>>>>>>>>>>>>>>>>> Thu Mar 14 16:16:41 2013 [DiM][I]: New VM state is FAILED
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> *Regards,***
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> *Preetham. N*
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> *
>>>>>>>>>>>>>>>>> *
>>>>>>>>>>>>>>>>>  *
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> *
>>>>>>>>>>>>>>>>>   _______________________________________________ Users
>>>>>>>>>>>>>>>>> mailing list Users at lists.opennebula.org
>>>>>>>>>>>>>>>>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>  --
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> *?** Regards,***
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> *Preetham. N*
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> *9945072638*
>>>>>>>>>>>>>>>>  *
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> *
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>  --
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> *?** Regards,***
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> *Preetham. N*
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> *9945072638*
>>>>>>>>>>>>>>>  *
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> *
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>  --
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> *?** Regards,***
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> *Preetham. N*
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> *9945072638*
>>>>>>>>>>>>>>  *
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> *
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>>
>>>>>>>>>>>>> *?** Regards,***
>>>>>>>>>>>>>
>>>>>>>>>>>>> *Preetham. N*
>>>>>>>>>>>>>
>>>>>>>>>>>>> *9945072638*
>>>>>>>>>>>>> *
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> *
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>>
>>>>>>>>>>>> *?** Regards,***
>>>>>>>>>>>>
>>>>>>>>>>>> *Preetham. N*
>>>>>>>>>>>>
>>>>>>>>>>>> *9945072638*
>>>>>>>>>>>> *
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> *
>>>>>>>>>>>>
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> Users mailing list
>>>>>>>>>>>> Users at lists.opennebula.org
>>>>>>>>>>>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>>
>>>>>>>>>> *?** Regards,***
>>>>>>>>>>
>>>>>>>>>> *Preetham. N*
>>>>>>>>>>
>>>>>>>>>> *9945072638*
>>>>>>>>>> *
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> *
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>>
>>>>>>>> *?** Regards,***
>>>>>>>>
>>>>>>>> *Preetham. N*
>>>>>>>>
>>>>>>>> *9945072638*
>>>>>>>> *
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> *
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>>
>>>>>> *?** Regards,***
>>>>>>
>>>>>> *Preetham. N*
>>>>>>
>>>>>> *9945072638*
>>>>>> *
>>>>>>
>>>>>>
>>>>>>
>>>>>> *
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>>
>>>>> *?** Regards,***
>>>>>
>>>>> *Preetham. N*
>>>>>
>>>>> *9945072638*
>>>>> *
>>>>>
>>>>>
>>>>>
>>>>> *
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>>
>>>> *?** Regards,***
>>>>
>>>> *Preetham. N*
>>>>
>>>> *9945072638*
>>>> *
>>>>
>>>>
>>>>
>>>> *
>>>>
>>>
>>>
>>>
>>> --
>>>
>>> *?** Regards,***
>>>
>>> *Preetham. N*
>>>
>>> *9945072638*
>>> *
>>>
>>>
>>>
>>> *
>>>
>>
>>
>
>
> --
>
> *?** Regards,***
>
> *Preetham. N*
>
> *9945072638*
> *
>
>
>
> *
>



-- 

*?** Regards,***

*Preetham. N*

*9945072638*
*



*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20130422/67edcc8a/attachment-0002.htm>

More information about the Users mailing list