[one-users] Onevm in Failed state
Carlos Martín Sánchez
cmartin at opennebula.org
Fri Apr 19 07:53:57 PDT 2013
Hi,
Here are some references about these attributes:
http://opennebula.org/documentation:rel4.0:template#os_and_boot_options_section
http://opennebula.org/documentation:rel4.0:xeng#usage
Regards
--
Carlos Martín, MSc
Project Engineer
OpenNebula - The Open-source Solution for Data Center Virtualization
www.OpenNebula.org | cmartin at opennebula.org |
@OpenNebula<http://twitter.com/opennebula><cmartin at opennebula.org>
On Fri, Apr 19, 2013 at 3:53 PM, Preetham Nagaraju <
preetham.nagaraju at gmail.com> wrote:
> *Hi Sir,*
>
> From failed vm log file, i got to know that *"i need to specify Kernel &
> Bootloader"* at the time of creating VM template --- under OS Booting
> tab.....
>
> But what parameters i need to specify there, since i want to create Ubuntu
> desktop os as my guest os vm....i.e what should i specify under :-
> *Boot, Root, Kernel cmd, Bootloader, Kernel tab & Ramdisk tab's........*
>
> I will be uploading image of *"**Ubuntu 12.04 desktop.iso"* os and after
> it comes to Ready state, i will start creating VM Template.... Please guide
> me what the paramenters to be entered in the vm template tab's for creating
> ubuntu as guest os......
>
>
> On Thu, Apr 18, 2013 at 4:36 PM, Preetham Nagaraju <
> preetham.nagaraju at gmail.com> wrote:
>
>>
>> Hi,
>>
>> Not able to create vm's from marketplace images nor directly uploading
>> the images, in the 2 host m/c which has Ubuntu 12.04 OS & XEN
>> hypervisor..... where xend daemon is also running....
>>
>> Please guide me how to create vm's in 2nd host m/c and make them
>> "Running" .....
>>
>>
>> On Thu, Apr 18, 2013 at 4:31 PM, Preetham Nagaraju <
>> preetham.nagaraju at gmail.com> wrote:
>>
>>> Hi,
>>>
>>> If i try to import OS which supports xen i.e. Debian Squeeze-xen image
>>> also, the vm created using this image also goes to "Failed" state...
>>>
>>>
>>> On Thu, Apr 18, 2013 at 12:48 PM, Preetham Nagaraju <
>>> preetham.nagaraju at gmail.com> wrote:
>>>
>>>> *Hi Sir,*
>>>>
>>>> You were right sir, it was ttylinux-kvm image i was using.....
>>>>
>>>> Since i have 2 m/c's with 2 different hypervisor's, i am not getting
>>>> any image common to both in Marketplace....
>>>>
>>>> So i downloaded Ubuntu 12.04 desktop.iso os and directly uploaded the
>>>> image.....
>>>> Went directly to "Image" tab selected "Create" and "Uploaded" the
>>>> downloaded image by giving the path... Image was uploaded successfully....
>>>>
>>>> Then created "Template" with updating info in "General, Storage,
>>>> Network, Input/Output" tabs... Template was created.....
>>>>
>>>> And then gave Instantiate with vm's as 2 but the vm in 2nd node is same
>>>> in* "Failed"* state..... Please find the attachment for failed vm log
>>>> file....
>>>>
>>>> And also vm in the 1st node is in "Running" state but there is network
>>>> in it... i.e internet is not working....
>>>>
>>>>
>>>>
>>>> On Wed, Apr 17, 2013 at 10:23 PM, Carlos Martín Sánchez <
>>>> cmartin at opennebula.org> wrote:
>>>>
>>>>> Can you doble-check that? I can only see ttylinux appliances for kvm
>>>>> and vmware.
>>>>>
>>>>> --
>>>>> Carlos Martín, MSc
>>>>> Project Engineer
>>>>> OpenNebula - The Open-source Solution for Data Center Virtualization
>>>>> www.OpenNebula.org | cmartin at opennebula.org | @OpenNebula<http://twitter.com/opennebula><cmartin at opennebula.org>
>>>>>
>>>>>
>>>>> On Wed, Apr 17, 2013 at 6:38 PM, Preetham Nagaraju <
>>>>> preetham.nagaraju at gmail.com> wrote:
>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> But i am importing the ttylinux-xen image only from Marketplace......
>>>>>>
>>>>>>
>>>>>> On Wed, Apr 17, 2013 at 9:12 PM, Carlos Martín Sánchez <
>>>>>> cmartin at opennebula.org> wrote:
>>>>>>
>>>>>>> Hi,
>>>>>>>
>>>>>>> OpenNebula will not convert the KVM ttylinux VM to a Xen ready VM.
>>>>>>> You need to create or import a xen-ready VM.
>>>>>>>
>>>>>>> Regards
>>>>>>>
>>>>>>> --
>>>>>>> Carlos Martín, MSc
>>>>>>> Project Engineer
>>>>>>> OpenNebula - The Open-source Solution for Data Center Virtualization
>>>>>>> www.OpenNebula.org | cmartin at opennebula.org | @OpenNebula<http://twitter.com/opennebula><cmartin at opennebula.org>
>>>>>>>
>>>>>>>
>>>>>>> On Wed, Apr 17, 2013 at 4:15 PM, Preetham Nagaraju <
>>>>>>> preetham.nagaraju at gmail.com> wrote:
>>>>>>>
>>>>>>>> *Hi Sir,*
>>>>>>>>
>>>>>>>> Firstly, i have installed *Opennebula 3.9.80 on Ubuntu 12.04 OS
>>>>>>>> which has KVM hypervisor* in it. I am using this machine as *both
>>>>>>>> Fontend & Host/Node* machine. In this, Opennebula is working fine
>>>>>>>> & the same m/c as node/host is also working fine i.e this host m/c in
>>>>>>>> opennebula is in *"ON"* state.
>>>>>>>>
>>>>>>>> Further i have another host m/c i.e *2nd host m/c which has
>>>>>>>> Ubuntu12.04 OS with XEN hypervisor*.. From the 1st m/c i can ssh
>>>>>>>> passwordless to 2nd m/c & vice-versa and also automount from 1st m/c to 2nd
>>>>>>>> m/c.... This 2nd host m/c is also added successfully to opennebula and it
>>>>>>>> is also in *"ON"* state....
>>>>>>>>
>>>>>>>> *oneadmin at opennebula:~$* *onehost list*
>>>>>>>>
>>>>>>>> ID NAME CLUSTER RVM ALLOCATED_CPU
>>>>>>>> ALLOCATED_MEM STAT
>>>>>>>> 8 opennebula - 0 0 / 200 (0%) 0K / 991.8M
>>>>>>>> (0%) on ----------------- 1st host m/c(KVM)
>>>>>>>> 16 node1 - 0 0 / 200 (0%) 0K / 2G
>>>>>>>> (0%) on ----------------- 2nd host m/c(XEN)
>>>>>>>>
>>>>>>>> After adding the host m/c's, further for creating VM's firstly i
>>>>>>>> imported the ttylinux (for eg.) from "Marketplace" and when it came to
>>>>>>>> "Ready" state, created the "Template".....
>>>>>>>>
>>>>>>>> *oneadmin at opennebula:~$ onetemplate list*
>>>>>>>> ID USER GROUP NAME
>>>>>>>> REGTIME
>>>>>>>> 4 oneadmin oneadmin tty-linux
>>>>>>>> 04/16 11:22:24
>>>>>>>>
>>>>>>>> After creating the template, gave "Instantiate" and selected the
>>>>>>>> created template and gave No. vm's to deploy as 2...
>>>>>>>> VM's got created but the VM in the 2nd host m/c is in *"Fail"*state whereas the VM in the 1st host m/c is in "Running" state....
>>>>>>>>
>>>>>>>> *oneadmin at opennebula:~$ onevm list*
>>>>>>>> ID USER GROUP NAME STAT UCPU UMEM
>>>>>>>> HOST TIME
>>>>>>>> 10 oneadmin oneadmin ttylinux-vm fail 0
>>>>>>>> 0K 0d 00h00 ----------------- 2nd
>>>>>>>> host m/c(XEN)
>>>>>>>> 11 oneadmin oneadmin ttylinux-vm runn 0 0K
>>>>>>>> opennebula 0d 00h00 ----------------- 1st host m/c(KVM)
>>>>>>>>
>>>>>>>> Sir, please guide me where i have done mistake or gone wrong from
>>>>>>>> the above, and help me out to come out from vm "Failed" state in the 2nd
>>>>>>>> host m/c which has XEN hypervisor in it.....
>>>>>>>>
>>>>>>>> Sir, i have also updated the "sudoers" in the opennebula m/c i.e
>>>>>>>> 1st host m/c and also in the 2nd host m/c... with giving all privileges....
>>>>>>>>
>>>>>>>> *%oneadmin ALL=(ALL) NOPASSWD: ALL
>>>>>>>>
>>>>>>>> %xen ALL=(ALL) NOPASSWD: /usr/sbin/xm *
>>>>>>>> **%xen ALL=(ALL) NOPASSWD: /usr/sbin/xentop **
>>>>>>>> *
>>>>>>>> *
>>>>>>>> And also have "uncommented" the drivers line in oned.config file
>>>>>>>> for both KVM & XEN with dummy also.....
>>>>>>>> *
>>>>>>>> *
>>>>>>>> Sir, please find the logs in the attachment.....
>>>>>>>>
>>>>>>>>
>>>>>>>> On Wed, Apr 17, 2013 at 2:55 PM, Carlos Martín Sánchez <
>>>>>>>> cmartin at opennebula.org> wrote:
>>>>>>>>
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> You may find the reason in the opennebula logs, see
>>>>>>>>> /var/log/one/oned.log and vm-id.log; or in the xen logs in the host.
>>>>>>>>> But if I understood your configuration, you are trying to run a
>>>>>>>>> KVM machine on Xen.
>>>>>>>>>
>>>>>>>>> Regards
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> Carlos Martín, MSc
>>>>>>>>> Project Engineer
>>>>>>>>> OpenNebula - The Open-source Solution for Data Center
>>>>>>>>> Virtualization
>>>>>>>>> www.OpenNebula.org | cmartin at opennebula.org | @OpenNebula<http://twitter.com/opennebula><cmartin at opennebula.org>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Mon, Apr 15, 2013 at 11:26 AM, Preetham Nagaraju <
>>>>>>>>> preetham.nagaraju at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> Hi Sir,
>>>>>>>>>>
>>>>>>>>>> Now i have added two host machines to Opennebula. First host m/c
>>>>>>>>>> is the opennebula frontend itself and the other m/c which has Ubuntu 12.04
>>>>>>>>>> & XEN hypervisor in it.... Both the host's are in "Running" i.e "ON"
>>>>>>>>>> state...
>>>>>>>>>>
>>>>>>>>>> Then i am trying to create VM in these host m/c's. After
>>>>>>>>>> uploading image & creating template, if i give "Instantiate" and give no.
>>>>>>>>>> of deploy vm as :- 2 , two vm's must be created!!!!!
>>>>>>>>>>
>>>>>>>>>> *2 vm's are creating in two host m/c's* but the *vm in the
>>>>>>>>>> second node* i.e Ubuntu 12.04 with XEN which is other than
>>>>>>>>>> opennebula frontend m/c is going to *"FAILED" state,* but the vm
>>>>>>>>>> created in the opennebula frontend m/c i.e first host, is in "RUNNING"
>>>>>>>>>> state....
>>>>>>>>>>
>>>>>>>>>> From the frontend m/c i can ssh passwordless to the second m/c
>>>>>>>>>> and vice-versa also successfully....
>>>>>>>>>>
>>>>>>>>>> sir please help me how to get the vm in "RUNNING" state in the
>>>>>>>>>> 2nd m/c...
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Thu, Mar 14, 2013 at 11:27 PM, Preetham Nagaraju <
>>>>>>>>>> preetham.nagaraju at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> for (1) VNC viewer on local pc means on the host machine
>>>>>>>>>>> sir....if it is so then i haven't installed VNC viewer on host machine, at
>>>>>>>>>>> the time of installing openneula i installed noVNC_gems tat's all....
>>>>>>>>>>>
>>>>>>>>>>> for (2), i will run that command after creating vm, but i have
>>>>>>>>>>> doubt that since we are creating the vm from template whether it can store
>>>>>>>>>>> the vm or it will get deleted after the vm is shutdown... that's the
>>>>>>>>>>> behaviour of vm after creating it by template right sir!!!!!
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Thu, Mar 14, 2013 at 11:17 PM, Tobias Honacker <
>>>>>>>>>>> t.honacker at googlemail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hi,
>>>>>>>>>>>>
>>>>>>>>>>>> --> 2. After creating the VM and the OS is installed run sudo
>>>>>>>>>>>> apt-get install acpid on it (VM)
>>>>>>>>>>>> --> 1. did you install any VNC viewer on your local pc?
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Best regards,
>>>>>>>>>>>> Tobias
>>>>>>>>>>>>
>>>>>>>>>>>> Am 14.03.2013 18:28, schrieb Preetham Nagaraju:
>>>>>>>>>>>>
>>>>>>>>>>>> Hi sir,
>>>>>>>>>>>>
>>>>>>>>>>>> i think for my first question (1) i need to make
>>>>>>>>>>>> clear.... Desktop means not the desktop version of Ubuntu OS, now i am able
>>>>>>>>>>>> to access the vm in command line's and not in the GUI mode..... i am able
>>>>>>>>>>>> to host vm, but it is opening in command line mode and not in the gui.....
>>>>>>>>>>>>
>>>>>>>>>>>> and also for the reply by you for (2) "sudo apt-get install
>>>>>>>>>>>> acpid" i need to run this command in the host machine or after creating the
>>>>>>>>>>>> vm i need to run this command....????
>>>>>>>>>>>>
>>>>>>>>>>>> On Thu, Mar 14, 2013 at 10:26 PM, Tobias Honacker <
>>>>>>>>>>>> t.honacker at googlemail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>
>>>>>>>>>>>>> --> 1. You have to download Ubuntu Desktop ISO to run
>>>>>>>>>>>>> Desktop after the installation is done
>>>>>>>>>>>>> Never installed any desktop on my servers yet but you can try
>>>>>>>>>>>>> this link [1].
>>>>>>>>>>>>>
>>>>>>>>>>>>> --> 2. Not 100% sure but try to update the template and
>>>>>>>>>>>>> shutdown the vm so changes can take effect. If not deploy a new VM.
>>>>>>>>>>>>> Also install the acpi daemon on your VM:
>>>>>>>>>>>>> sudo apt-get install acpid
>>>>>>>>>>>>>
>>>>>>>>>>>>> This should help.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Best regards,
>>>>>>>>>>>>> Tobias
>>>>>>>>>>>>>
>>>>>>>>>>>>> [1]
>>>>>>>>>>>>> http://www.filiwiese.com/installing-gnome-on-ubuntu-12-04-precise-pangolin/
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Von: Preetham Nagaraju <preetham.nagaraju at gmail.com>
>>>>>>>>>>>>> Datum: Donnerstag, 14. März 2013 17:14
>>>>>>>>>>>>>
>>>>>>>>>>>>> An: Tobias Honacker <t.honacker at googlemail.com>
>>>>>>>>>>>>> Cc: <users at lists.opennebula.org>, <
>>>>>>>>>>>>> users-owner at lists.opennebula.org>
>>>>>>>>>>>>> Betreff: Re: [one-users] Onevm in Failed state
>>>>>>>>>>>>>
>>>>>>>>>>>>> i installed Ubuntu 12.04 OS......
>>>>>>>>>>>>>
>>>>>>>>>>>>> for 2) is it ok now to go to the created template and click
>>>>>>>>>>>>> update properties and edit the features given by you there directly????
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Thu, Mar 14, 2013 at 9:40 PM, Tobias Honacker <
>>>>>>>>>>>>> t.honacker at googlemail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --> 1. which OS did you install?
>>>>>>>>>>>>>> --> 2. Try to enable ACPI in the feature section when you
>>>>>>>>>>>>>> create a template or update your template with:
>>>>>>>>>>>>>> FEATURES=[
>>>>>>>>>>>>>> ACPI="yes" ]
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Best regards,
>>>>>>>>>>>>>> Tobias
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Von: Preetham Nagaraju <preetham.nagaraju at gmail.com>
>>>>>>>>>>>>>> Datum: Donnerstag, 14. März 2013 16:54
>>>>>>>>>>>>>> An: Tobias Honacker <t.honacker at googlemail.com>
>>>>>>>>>>>>>> Cc: <users at lists.opennebula.org>, <
>>>>>>>>>>>>>> users-owner at lists.opennebula.org>
>>>>>>>>>>>>>> Betreff: Re: [one-users] Onevm in Failed state
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi Sir,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> You were right, it was the bridge problem..... I sorted it
>>>>>>>>>>>>>> out.... Now i am able to create VM successfully... It is in "running"
>>>>>>>>>>>>>> state......
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Sir after running the vm, we click on vnc to open a new tab
>>>>>>>>>>>>>> of created vm and first it asks for installing OS.... i proceeded with all
>>>>>>>>>>>>>> that and got successfully installed the OS.... But the vm is in
>>>>>>>>>>>>>> *"CLI" mode* and not in the desktop or graphics mode......
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> *Could you please guide:*-
>>>>>>>>>>>>>> 1. how to open the *VM in graphics mode* with the desktop
>>>>>>>>>>>>>> view and not this CLI mode......
>>>>>>>>>>>>>> 2. If we *shutdown the vm not able to start it again.*...
>>>>>>>>>>>>>> i need to cancel it and start instantiate again the template which will
>>>>>>>>>>>>>> give new vm and start installing os again.... how to shutdown created vm
>>>>>>>>>>>>>> and start back again?????
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Thu, Mar 14, 2013 at 4:40 PM, Tobias Honacker <
>>>>>>>>>>>>>> t.honacker at googlemail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Did u create a bridge named "br0"?
>>>>>>>>>>>>>>> Please provide the output of ifconfig –a
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> It could also be a permission problem, follow these guide
>>>>>>>>>>>>>>> [1] and provide us the output of:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> grep -vE '^($|#)' /etc/libvirt/qemu.conf
>>>>>>>>>>>>>>> grep -vE '^($|#)' /etc/libvirt/libvirtd.conf
>>>>>>>>>>>>>>> cat /var/lib/one/var/datastores/0/10/deployment.1
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Best regards,
>>>>>>>>>>>>>>> Tobias
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Von: Preetham Nagaraju <preetham.nagaraju at gmail.com>
>>>>>>>>>>>>>>> Datum: Donnerstag, 14. März 2013 12:01
>>>>>>>>>>>>>>> An: <users at lists.opennebula.org>, <
>>>>>>>>>>>>>>> users-owner at lists.opennebula.org>
>>>>>>>>>>>>>>> Betreff: [one-users] Onevm in Failed state
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I am using Opennebula 3.8.3 on Ubuntu with KVM
>>>>>>>>>>>>>>> hypervisor in it.
>>>>>>>>>>>>>>> I added the host successfully, and created the image and
>>>>>>>>>>>>>>> template.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> But the virtual machine starts with pending, prolog , boot
>>>>>>>>>>>>>>> and then goes to failed state......
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Please get me out of this failed state.......
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> VM information is as follows:-
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Virtual Machine information - one-10 ID 10 Name one-10
>>>>>>>>>>>>>>> Owner preetham Group users State FAILED LCM State
>>>>>>>>>>>>>>> LCM_INIT Host -- Start time 16:02:14 03/14/2013 Deploy ID
>>>>>>>>>>>>>>> - Permissions
>>>>>>>>>>>>>>> Owner um- Group --- Other --- Monitoring
>>>>>>>>>>>>>>> information Net_TX 0 Net_RX 0 Used Memory 0K Used CPU 0 VNC
>>>>>>>>>>>>>>> Session [image: VNC Disabled]
>>>>>>>>>>>>>>> My Vm template is as follows:-
>>>>>>>>>>>>>>> VM template VCPU 1 NIC
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> MAC 02:00:c0:a8:96:67 NETWORK_ID 1 VLAN NO
>>>>>>>>>>>>>>> NETWORK_UNAME oneadmin BRIDGE br0 NETWORK localhost IP
>>>>>>>>>>>>>>> 192.168.150.103
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> ERROR
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> TIMESTAMP Thu Mar 14 16:16:41 2013 MESSAGE Error
>>>>>>>>>>>>>>> deploying virtual machine: Could not create domain from
>>>>>>>>>>>>>>> /var/lib/one/var//datastores/0/10/deployment.1
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> VMID 10 RAW
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> TYPE kvm
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> NAME one-10 DISK
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> 0
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> DATASTORE user_ds TYPE CDROM TARGET hdb SAVE NO IMAGE
>>>>>>>>>>>>>>> cd-Ubuntu-precise DISK_ID 0 DEV_PREFIX hd CLONE YES
>>>>>>>>>>>>>>> SOURCE
>>>>>>>>>>>>>>> /var/lib/one/var/datastores/100/c2d97c815b985bece0b710a0675d1bb9
>>>>>>>>>>>>>>> IMAGE_UNAME preetham IMAGE_ID 11 READONLY YES TM_MAD
>>>>>>>>>>>>>>> shared DATASTORE_ID 100
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> 1
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> DATASTORE user_ds TYPE FILE TARGET hda SAVE YES
>>>>>>>>>>>>>>> PERSISTENT YES IMAGE Ubuntu-precise DISK_ID 1 DEV_PREFIX
>>>>>>>>>>>>>>> hd CLONE NO SOURCE
>>>>>>>>>>>>>>> /var/lib/one/var/datastores/100/c1e8082f7e34c0cc91254c086f9b72de
>>>>>>>>>>>>>>> IMAGE_UNAME preetham IMAGE_ID 12 READONLY NO TM_MAD
>>>>>>>>>>>>>>> shared DATASTORE_ID 100
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> OS
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> ARCH x86_64 BOOT cdrom
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> MEMORY 1024 CPU 1 TEMPLATE_ID 11 GRAPHICS
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> TYPE vnc PORT 5910 KEYMAP es
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> My vm log is as follows:-
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Thu Mar 14 16:02:37 2013 [DiM][I]: New VM state is ACTIVE.
>>>>>>>>>>>>>>> Thu Mar 14 16:02:37 2013 [LCM][I]: New VM state is PROLOG.
>>>>>>>>>>>>>>> Thu Mar 14 16:02:37 2013 [VM][I]: Virtual Machine has no context
>>>>>>>>>>>>>>> Thu Mar 14 16:03:08 2013 [TM][I]: clone: Cloning /var/lib/one/var/datastores/100/c2d97c815b985bece0b710a0675d1bb9 in opennebula:/var/lib/one/var//datastores/0/10/disk.0
>>>>>>>>>>>>>>> Thu Mar 14 16:03:08 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>>>>> Thu Mar 14 16:03:09 2013 [TM][I]: ln: Linking /var/lib/one/var/datastores/100/c1e8082f7e34c0cc91254c086f9b72de in opennebula:/var/lib/one/var//datastores/0/10/disk.1
>>>>>>>>>>>>>>> Thu Mar 14 16:03:09 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>>>>> Thu Mar 14 16:03:09 2013 [LCM][I]: New VM state is BOOT
>>>>>>>>>>>>>>> Thu Mar 14 16:03:09 2013 [VMM][I]: Generating deployment file: /var/lib/one/var/vms/10/deployment.0
>>>>>>>>>>>>>>> Thu Mar 14 16:03:10 2013 [VMM][I]: ExitCode: 0
>>>>>>>>>>>>>>> Thu Mar 14 16:03:10 2013 [VMM][I]: Successfully execute network driver operation: pre.
>>>>>>>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: Command execution fail: cat << EOT | /var/tmp/one/vmm/kvm/deploy /var/lib/one/var//datastores/0/10/deployment.0 opennebula 10 opennebula
>>>>>>>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: error: Failed to create domain from /var/lib/one/var//datastores/0/10/deployment.0
>>>>>>>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: error: Cannot get interface MTU on 'br0': No such deviceThu Mar 14 16:03:13 2013 [VMM][E]: Could not create domain from /var/lib/one/var//datastores/0/10/deployment.0
>>>>>>>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: ExitCode: 255
>>>>>>>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: Failed to execute virtualization driver operation: deploy.Thu Mar 14 16:03:13 2013 [VMM][E]: Error deploying virtual machine: Could not create domain from /var/lib/one/var//datastores/0/10/deployment.0
>>>>>>>>>>>>>>> Thu Mar 14 16:03:13 2013 [DiM][I]: New VM state is FAILED
>>>>>>>>>>>>>>> Thu Mar 14 16:16:04 2013 [DiM][I]: New VM state is CLEANUP.
>>>>>>>>>>>>>>> Thu Mar 14 16:16:04 2013 [TM][I]: delete: Deleting /var/lib/one/var/datastores/0/10/disk.0
>>>>>>>>>>>>>>> Thu Mar 14 16:16:04 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>>>>> Thu Mar 14 16:16:04 2013 [TM][I]: delete: Deleting /var/lib/one/var/datastores/0/10/disk.1
>>>>>>>>>>>>>>> Thu Mar 14 16:16:04 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>>>>> Thu Mar 14 16:16:05 2013 [TM][I]: delete: Deleting /var/lib/one/var/datastores/0/10
>>>>>>>>>>>>>>> Thu Mar 14 16:16:05 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>>>>> Thu Mar 14 16:16:05 2013 [DiM][I]: New VM state is PENDING
>>>>>>>>>>>>>>> Thu Mar 14 16:16:10 2013 [DiM][I]: New VM state is ACTIVE.
>>>>>>>>>>>>>>> Thu Mar 14 16:16:10 2013 [LCM][I]: New VM state is PROLOG.
>>>>>>>>>>>>>>> Thu Mar 14 16:16:10 2013 [VM][I]: Virtual Machine has no context
>>>>>>>>>>>>>>> Thu Mar 14 16:16:36 2013 [TM][I]: clone: Cloning /var/lib/one/var/datastores/100/c2d97c815b985bece0b710a0675d1bb9 in opennebula:/var/lib/one/var//datastores/0/10/disk.0
>>>>>>>>>>>>>>> Thu Mar 14 16:16:36 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>>>>> Thu Mar 14 16:16:38 2013 [TM][I]: ln: Linking /var/lib/one/var/datastores/100/c1e8082f7e34c0cc91254c086f9b72de in opennebula:/var/lib/one/var//datastores/0/10/disk.1
>>>>>>>>>>>>>>> Thu Mar 14 16:16:38 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>>>>> Thu Mar 14 16:16:38 2013 [LCM][I]: New VM state is BOOT
>>>>>>>>>>>>>>> Thu Mar 14 16:16:38 2013 [VMM][I]: Generating deployment file: /var/lib/one/var/vms/10/deployment.1
>>>>>>>>>>>>>>> Thu Mar 14 16:16:39 2013 [VMM][I]: ExitCode: 0
>>>>>>>>>>>>>>> Thu Mar 14 16:16:39 2013 [VMM][I]: Successfully execute network driver operation: pre.
>>>>>>>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: Command execution fail: cat << EOT | /var/tmp/one/vmm/kvm/deploy /var/lib/one/var//datastores/0/10/deployment.1 opennebula 10 opennebula
>>>>>>>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: error: Failed to create domain from /var/lib/one/var//datastores/0/10/deployment.1
>>>>>>>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: error: Cannot get interface MTU on 'br0': No such deviceThu Mar 14 16:16:41 2013 [VMM][E]: Could not create domain from /var/lib/one/var//datastores/0/10/deployment.1
>>>>>>>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: ExitCode: 255
>>>>>>>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: Failed to execute virtualization driver operation: deploy.Thu Mar 14 16:16:41 2013 [VMM][E]: Error deploying virtual machine: Could not create domain from /var/lib/one/var//datastores/0/10/deployment.1
>>>>>>>>>>>>>>> Thu Mar 14 16:16:41 2013 [DiM][I]: New VM state is FAILED
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> *Regards,***
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> *Preetham. N*
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> *
>>>>>>>>>>>>>>> *
>>>>>>>>>>>>>>> *
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> *
>>>>>>>>>>>>>>> _______________________________________________ Users
>>>>>>>>>>>>>>> mailing list Users at lists.opennebula.org
>>>>>>>>>>>>>>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> *?** Regards,***
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> *Preetham. N*
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> *9945072638*
>>>>>>>>>>>>>> *
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> *
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>>
>>>>>>>>>>>>> *?** Regards,***
>>>>>>>>>>>>>
>>>>>>>>>>>>> *Preetham. N*
>>>>>>>>>>>>>
>>>>>>>>>>>>> *9945072638*
>>>>>>>>>>>>> *
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> *
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>>
>>>>>>>>>>>> *?** Regards,***
>>>>>>>>>>>>
>>>>>>>>>>>> *Preetham. N*
>>>>>>>>>>>>
>>>>>>>>>>>> *9945072638*
>>>>>>>>>>>> *
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> *
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>>
>>>>>>>>>>> *?** Regards,***
>>>>>>>>>>>
>>>>>>>>>>> *Preetham. N*
>>>>>>>>>>>
>>>>>>>>>>> *9945072638*
>>>>>>>>>>> *
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> *
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>>
>>>>>>>>>> *?** Regards,***
>>>>>>>>>>
>>>>>>>>>> *Preetham. N*
>>>>>>>>>>
>>>>>>>>>> *9945072638*
>>>>>>>>>> *
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> *
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> Users mailing list
>>>>>>>>>> Users at lists.opennebula.org
>>>>>>>>>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>>
>>>>>>>> *?** Regards,***
>>>>>>>>
>>>>>>>> *Preetham. N*
>>>>>>>>
>>>>>>>> *9945072638*
>>>>>>>> *
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> *
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>>
>>>>>> *?** Regards,***
>>>>>>
>>>>>> *Preetham. N*
>>>>>>
>>>>>> *9945072638*
>>>>>> *
>>>>>>
>>>>>>
>>>>>>
>>>>>> *
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>>
>>>> *?** Regards,***
>>>>
>>>> *Preetham. N*
>>>>
>>>> *9945072638*
>>>> *
>>>>
>>>>
>>>>
>>>> *
>>>>
>>>
>>>
>>>
>>> --
>>>
>>> *?** Regards,***
>>>
>>> *Preetham. N*
>>>
>>> *9945072638*
>>> *
>>>
>>>
>>>
>>> *
>>>
>>
>>
>>
>> --
>>
>> *?** Regards,***
>>
>> *Preetham. N*
>>
>> *9945072638*
>> *
>>
>>
>>
>> *
>>
>
>
>
> --
>
> *?** Regards,***
>
> *Preetham. N*
>
> *9945072638*
> *
>
>
>
> *
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20130419/25e976e8/attachment-0002.htm>
More information about the Users
mailing list