[one-users] Onevm in Failed state
Preetham Nagaraju
preetham.nagaraju at gmail.com
Fri Apr 19 06:53:21 PDT 2013
*Hi Sir,*
>From failed vm log file, i got to know that *"i need to specify Kernel &
Bootloader"* at the time of creating VM template --- under OS Booting
tab.....
But what parameters i need to specify there, since i want to create Ubuntu
desktop os as my guest os vm....i.e what should i specify under :-
*Boot, Root, Kernel cmd, Bootloader, Kernel tab & Ramdisk tab's........*
I will be uploading image of *"**Ubuntu 12.04 desktop.iso"* os and after it
comes to Ready state, i will start creating VM Template.... Please guide me
what the paramenters to be entered in the vm template tab's for creating
ubuntu as guest os......
On Thu, Apr 18, 2013 at 4:36 PM, Preetham Nagaraju <
preetham.nagaraju at gmail.com> wrote:
>
> Hi,
>
> Not able to create vm's from marketplace images nor directly uploading the
> images, in the 2 host m/c which has Ubuntu 12.04 OS & XEN hypervisor.....
> where xend daemon is also running....
>
> Please guide me how to create vm's in 2nd host m/c and make them "Running"
> .....
>
>
> On Thu, Apr 18, 2013 at 4:31 PM, Preetham Nagaraju <
> preetham.nagaraju at gmail.com> wrote:
>
>> Hi,
>>
>> If i try to import OS which supports xen i.e. Debian Squeeze-xen image
>> also, the vm created using this image also goes to "Failed" state...
>>
>>
>> On Thu, Apr 18, 2013 at 12:48 PM, Preetham Nagaraju <
>> preetham.nagaraju at gmail.com> wrote:
>>
>>> *Hi Sir,*
>>>
>>> You were right sir, it was ttylinux-kvm image i was using.....
>>>
>>> Since i have 2 m/c's with 2 different hypervisor's, i am not getting any
>>> image common to both in Marketplace....
>>>
>>> So i downloaded Ubuntu 12.04 desktop.iso os and directly uploaded the
>>> image.....
>>> Went directly to "Image" tab selected "Create" and "Uploaded" the
>>> downloaded image by giving the path... Image was uploaded successfully....
>>>
>>> Then created "Template" with updating info in "General, Storage,
>>> Network, Input/Output" tabs... Template was created.....
>>>
>>> And then gave Instantiate with vm's as 2 but the vm in 2nd node is same
>>> in* "Failed"* state..... Please find the attachment for failed vm log
>>> file....
>>>
>>> And also vm in the 1st node is in "Running" state but there is network
>>> in it... i.e internet is not working....
>>>
>>>
>>>
>>> On Wed, Apr 17, 2013 at 10:23 PM, Carlos Martín Sánchez <
>>> cmartin at opennebula.org> wrote:
>>>
>>>> Can you doble-check that? I can only see ttylinux appliances for kvm
>>>> and vmware.
>>>>
>>>> --
>>>> Carlos Martín, MSc
>>>> Project Engineer
>>>> OpenNebula - The Open-source Solution for Data Center Virtualization
>>>> www.OpenNebula.org | cmartin at opennebula.org | @OpenNebula<http://twitter.com/opennebula><cmartin at opennebula.org>
>>>>
>>>>
>>>> On Wed, Apr 17, 2013 at 6:38 PM, Preetham Nagaraju <
>>>> preetham.nagaraju at gmail.com> wrote:
>>>>
>>>>> Hi,
>>>>>
>>>>> But i am importing the ttylinux-xen image only from Marketplace......
>>>>>
>>>>>
>>>>> On Wed, Apr 17, 2013 at 9:12 PM, Carlos Martín Sánchez <
>>>>> cmartin at opennebula.org> wrote:
>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> OpenNebula will not convert the KVM ttylinux VM to a Xen ready VM.
>>>>>> You need to create or import a xen-ready VM.
>>>>>>
>>>>>> Regards
>>>>>>
>>>>>> --
>>>>>> Carlos Martín, MSc
>>>>>> Project Engineer
>>>>>> OpenNebula - The Open-source Solution for Data Center Virtualization
>>>>>> www.OpenNebula.org | cmartin at opennebula.org | @OpenNebula<http://twitter.com/opennebula><cmartin at opennebula.org>
>>>>>>
>>>>>>
>>>>>> On Wed, Apr 17, 2013 at 4:15 PM, Preetham Nagaraju <
>>>>>> preetham.nagaraju at gmail.com> wrote:
>>>>>>
>>>>>>> *Hi Sir,*
>>>>>>>
>>>>>>> Firstly, i have installed *Opennebula 3.9.80 on Ubuntu 12.04 OS
>>>>>>> which has KVM hypervisor* in it. I am using this machine as *both
>>>>>>> Fontend & Host/Node* machine. In this, Opennebula is working fine &
>>>>>>> the same m/c as node/host is also working fine i.e this host m/c in
>>>>>>> opennebula is in *"ON"* state.
>>>>>>>
>>>>>>> Further i have another host m/c i.e *2nd host m/c which has
>>>>>>> Ubuntu12.04 OS with XEN hypervisor*.. From the 1st m/c i can ssh
>>>>>>> passwordless to 2nd m/c & vice-versa and also automount from 1st m/c to 2nd
>>>>>>> m/c.... This 2nd host m/c is also added successfully to opennebula and it
>>>>>>> is also in *"ON"* state....
>>>>>>>
>>>>>>> *oneadmin at opennebula:~$* *onehost list*
>>>>>>>
>>>>>>> ID NAME CLUSTER RVM ALLOCATED_CPU
>>>>>>> ALLOCATED_MEM STAT
>>>>>>> 8 opennebula - 0 0 / 200 (0%) 0K / 991.8M
>>>>>>> (0%) on ----------------- 1st host m/c(KVM)
>>>>>>> 16 node1 - 0 0 / 200 (0%) 0K / 2G
>>>>>>> (0%) on ----------------- 2nd host m/c(XEN)
>>>>>>>
>>>>>>> After adding the host m/c's, further for creating VM's firstly i
>>>>>>> imported the ttylinux (for eg.) from "Marketplace" and when it came to
>>>>>>> "Ready" state, created the "Template".....
>>>>>>>
>>>>>>> *oneadmin at opennebula:~$ onetemplate list*
>>>>>>> ID USER GROUP NAME
>>>>>>> REGTIME
>>>>>>> 4 oneadmin oneadmin tty-linux
>>>>>>> 04/16 11:22:24
>>>>>>>
>>>>>>> After creating the template, gave "Instantiate" and selected the
>>>>>>> created template and gave No. vm's to deploy as 2...
>>>>>>> VM's got created but the VM in the 2nd host m/c is in *"Fail"*state whereas the VM in the 1st host m/c is in "Running" state....
>>>>>>>
>>>>>>> *oneadmin at opennebula:~$ onevm list*
>>>>>>> ID USER GROUP NAME STAT UCPU UMEM
>>>>>>> HOST TIME
>>>>>>> 10 oneadmin oneadmin ttylinux-vm fail 0
>>>>>>> 0K 0d 00h00 ----------------- 2nd
>>>>>>> host m/c(XEN)
>>>>>>> 11 oneadmin oneadmin ttylinux-vm runn 0 0K
>>>>>>> opennebula 0d 00h00 ----------------- 1st host m/c(KVM)
>>>>>>>
>>>>>>> Sir, please guide me where i have done mistake or gone wrong from
>>>>>>> the above, and help me out to come out from vm "Failed" state in the 2nd
>>>>>>> host m/c which has XEN hypervisor in it.....
>>>>>>>
>>>>>>> Sir, i have also updated the "sudoers" in the opennebula m/c i.e 1st
>>>>>>> host m/c and also in the 2nd host m/c... with giving all privileges....
>>>>>>>
>>>>>>> *%oneadmin ALL=(ALL) NOPASSWD: ALL
>>>>>>>
>>>>>>> %xen ALL=(ALL) NOPASSWD: /usr/sbin/xm *
>>>>>>> **%xen ALL=(ALL) NOPASSWD: /usr/sbin/xentop **
>>>>>>> *
>>>>>>> *
>>>>>>> And also have "uncommented" the drivers line in oned.config file for
>>>>>>> both KVM & XEN with dummy also.....
>>>>>>> *
>>>>>>> *
>>>>>>> Sir, please find the logs in the attachment.....
>>>>>>>
>>>>>>>
>>>>>>> On Wed, Apr 17, 2013 at 2:55 PM, Carlos Martín Sánchez <
>>>>>>> cmartin at opennebula.org> wrote:
>>>>>>>
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>> You may find the reason in the opennebula logs, see
>>>>>>>> /var/log/one/oned.log and vm-id.log; or in the xen logs in the host.
>>>>>>>> But if I understood your configuration, you are trying to run a KVM
>>>>>>>> machine on Xen.
>>>>>>>>
>>>>>>>> Regards
>>>>>>>>
>>>>>>>> --
>>>>>>>> Carlos Martín, MSc
>>>>>>>> Project Engineer
>>>>>>>> OpenNebula - The Open-source Solution for Data Center Virtualization
>>>>>>>> www.OpenNebula.org | cmartin at opennebula.org | @OpenNebula<http://twitter.com/opennebula><cmartin at opennebula.org>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Mon, Apr 15, 2013 at 11:26 AM, Preetham Nagaraju <
>>>>>>>> preetham.nagaraju at gmail.com> wrote:
>>>>>>>>
>>>>>>>>> Hi Sir,
>>>>>>>>>
>>>>>>>>> Now i have added two host machines to Opennebula. First host m/c
>>>>>>>>> is the opennebula frontend itself and the other m/c which has Ubuntu 12.04
>>>>>>>>> & XEN hypervisor in it.... Both the host's are in "Running" i.e "ON"
>>>>>>>>> state...
>>>>>>>>>
>>>>>>>>> Then i am trying to create VM in these host m/c's. After uploading
>>>>>>>>> image & creating template, if i give "Instantiate" and give no. of deploy
>>>>>>>>> vm as :- 2 , two vm's must be created!!!!!
>>>>>>>>>
>>>>>>>>> *2 vm's are creating in two host m/c's* but the *vm in the second
>>>>>>>>> node* i.e Ubuntu 12.04 with XEN which is other than opennebula
>>>>>>>>> frontend m/c is going to *"FAILED" state,* but the vm created in
>>>>>>>>> the opennebula frontend m/c i.e first host, is in "RUNNING" state....
>>>>>>>>>
>>>>>>>>> From the frontend m/c i can ssh passwordless to the second m/c and
>>>>>>>>> vice-versa also successfully....
>>>>>>>>>
>>>>>>>>> sir please help me how to get the vm in "RUNNING" state in the 2nd
>>>>>>>>> m/c...
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Thu, Mar 14, 2013 at 11:27 PM, Preetham Nagaraju <
>>>>>>>>> preetham.nagaraju at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> for (1) VNC viewer on local pc means on the host machine
>>>>>>>>>> sir....if it is so then i haven't installed VNC viewer on host machine, at
>>>>>>>>>> the time of installing openneula i installed noVNC_gems tat's all....
>>>>>>>>>>
>>>>>>>>>> for (2), i will run that command after creating vm, but i have
>>>>>>>>>> doubt that since we are creating the vm from template whether it can store
>>>>>>>>>> the vm or it will get deleted after the vm is shutdown... that's the
>>>>>>>>>> behaviour of vm after creating it by template right sir!!!!!
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Thu, Mar 14, 2013 at 11:17 PM, Tobias Honacker <
>>>>>>>>>> t.honacker at googlemail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> Hi,
>>>>>>>>>>>
>>>>>>>>>>> --> 2. After creating the VM and the OS is installed run sudo
>>>>>>>>>>> apt-get install acpid on it (VM)
>>>>>>>>>>> --> 1. did you install any VNC viewer on your local pc?
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Best regards,
>>>>>>>>>>> Tobias
>>>>>>>>>>>
>>>>>>>>>>> Am 14.03.2013 18:28, schrieb Preetham Nagaraju:
>>>>>>>>>>>
>>>>>>>>>>> Hi sir,
>>>>>>>>>>>
>>>>>>>>>>> i think for my first question (1) i need to make
>>>>>>>>>>> clear.... Desktop means not the desktop version of Ubuntu OS, now i am able
>>>>>>>>>>> to access the vm in command line's and not in the GUI mode..... i am able
>>>>>>>>>>> to host vm, but it is opening in command line mode and not in the gui.....
>>>>>>>>>>>
>>>>>>>>>>> and also for the reply by you for (2) "sudo apt-get install
>>>>>>>>>>> acpid" i need to run this command in the host machine or after creating the
>>>>>>>>>>> vm i need to run this command....????
>>>>>>>>>>>
>>>>>>>>>>> On Thu, Mar 14, 2013 at 10:26 PM, Tobias Honacker <
>>>>>>>>>>> t.honacker at googlemail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hi,
>>>>>>>>>>>>
>>>>>>>>>>>> --> 1. You have to download Ubuntu Desktop ISO to run
>>>>>>>>>>>> Desktop after the installation is done
>>>>>>>>>>>> Never installed any desktop on my servers yet but you can try
>>>>>>>>>>>> this link [1].
>>>>>>>>>>>>
>>>>>>>>>>>> --> 2. Not 100% sure but try to update the template and
>>>>>>>>>>>> shutdown the vm so changes can take effect. If not deploy a new VM.
>>>>>>>>>>>> Also install the acpi daemon on your VM:
>>>>>>>>>>>> sudo apt-get install acpid
>>>>>>>>>>>>
>>>>>>>>>>>> This should help.
>>>>>>>>>>>>
>>>>>>>>>>>> Best regards,
>>>>>>>>>>>> Tobias
>>>>>>>>>>>>
>>>>>>>>>>>> [1]
>>>>>>>>>>>> http://www.filiwiese.com/installing-gnome-on-ubuntu-12-04-precise-pangolin/
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Von: Preetham Nagaraju <preetham.nagaraju at gmail.com>
>>>>>>>>>>>> Datum: Donnerstag, 14. März 2013 17:14
>>>>>>>>>>>>
>>>>>>>>>>>> An: Tobias Honacker <t.honacker at googlemail.com>
>>>>>>>>>>>> Cc: <users at lists.opennebula.org>, <
>>>>>>>>>>>> users-owner at lists.opennebula.org>
>>>>>>>>>>>> Betreff: Re: [one-users] Onevm in Failed state
>>>>>>>>>>>>
>>>>>>>>>>>> i installed Ubuntu 12.04 OS......
>>>>>>>>>>>>
>>>>>>>>>>>> for 2) is it ok now to go to the created template and click
>>>>>>>>>>>> update properties and edit the features given by you there directly????
>>>>>>>>>>>>
>>>>>>>>>>>> On Thu, Mar 14, 2013 at 9:40 PM, Tobias Honacker <
>>>>>>>>>>>> t.honacker at googlemail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>
>>>>>>>>>>>>> --> 1. which OS did you install?
>>>>>>>>>>>>> --> 2. Try to enable ACPI in the feature section when you
>>>>>>>>>>>>> create a template or update your template with:
>>>>>>>>>>>>> FEATURES=[
>>>>>>>>>>>>> ACPI="yes" ]
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Best regards,
>>>>>>>>>>>>> Tobias
>>>>>>>>>>>>>
>>>>>>>>>>>>> Von: Preetham Nagaraju <preetham.nagaraju at gmail.com>
>>>>>>>>>>>>> Datum: Donnerstag, 14. März 2013 16:54
>>>>>>>>>>>>> An: Tobias Honacker <t.honacker at googlemail.com>
>>>>>>>>>>>>> Cc: <users at lists.opennebula.org>, <
>>>>>>>>>>>>> users-owner at lists.opennebula.org>
>>>>>>>>>>>>> Betreff: Re: [one-users] Onevm in Failed state
>>>>>>>>>>>>>
>>>>>>>>>>>>> Hi Sir,
>>>>>>>>>>>>>
>>>>>>>>>>>>> You were right, it was the bridge problem..... I sorted it
>>>>>>>>>>>>> out.... Now i am able to create VM successfully... It is in "running"
>>>>>>>>>>>>> state......
>>>>>>>>>>>>>
>>>>>>>>>>>>> Sir after running the vm, we click on vnc to open a new tab
>>>>>>>>>>>>> of created vm and first it asks for installing OS.... i proceeded with all
>>>>>>>>>>>>> that and got successfully installed the OS.... But the vm is in
>>>>>>>>>>>>> *"CLI" mode* and not in the desktop or graphics mode......
>>>>>>>>>>>>>
>>>>>>>>>>>>> *Could you please guide:*-
>>>>>>>>>>>>> 1. how to open the *VM in graphics mode* with the desktop
>>>>>>>>>>>>> view and not this CLI mode......
>>>>>>>>>>>>> 2. If we *shutdown the vm not able to start it again.*...
>>>>>>>>>>>>> i need to cancel it and start instantiate again the template which will
>>>>>>>>>>>>> give new vm and start installing os again.... how to shutdown created vm
>>>>>>>>>>>>> and start back again?????
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Thu, Mar 14, 2013 at 4:40 PM, Tobias Honacker <
>>>>>>>>>>>>> t.honacker at googlemail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Did u create a bridge named "br0"?
>>>>>>>>>>>>>> Please provide the output of ifconfig –a
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> It could also be a permission problem, follow these guide
>>>>>>>>>>>>>> [1] and provide us the output of:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> grep -vE '^($|#)' /etc/libvirt/qemu.conf
>>>>>>>>>>>>>> grep -vE '^($|#)' /etc/libvirt/libvirtd.conf
>>>>>>>>>>>>>> cat /var/lib/one/var/datastores/0/10/deployment.1
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Best regards,
>>>>>>>>>>>>>> Tobias
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Von: Preetham Nagaraju <preetham.nagaraju at gmail.com>
>>>>>>>>>>>>>> Datum: Donnerstag, 14. März 2013 12:01
>>>>>>>>>>>>>> An: <users at lists.opennebula.org>, <
>>>>>>>>>>>>>> users-owner at lists.opennebula.org>
>>>>>>>>>>>>>> Betreff: [one-users] Onevm in Failed state
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I am using Opennebula 3.8.3 on Ubuntu with KVM
>>>>>>>>>>>>>> hypervisor in it.
>>>>>>>>>>>>>> I added the host successfully, and created the image and
>>>>>>>>>>>>>> template.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> But the virtual machine starts with pending, prolog , boot
>>>>>>>>>>>>>> and then goes to failed state......
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Please get me out of this failed state.......
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> VM information is as follows:-
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Virtual Machine information - one-10 ID 10 Name one-10
>>>>>>>>>>>>>> Owner preetham Group users State FAILED LCM State LCM_INIT
>>>>>>>>>>>>>> Host -- Start time 16:02:14 03/14/2013 Deploy ID -
>>>>>>>>>>>>>> Permissions
>>>>>>>>>>>>>> Owner um- Group --- Other --- Monitoring
>>>>>>>>>>>>>> information Net_TX 0 Net_RX 0 Used Memory 0K Used CPU 0 VNC
>>>>>>>>>>>>>> Session [image: VNC Disabled]
>>>>>>>>>>>>>> My Vm template is as follows:-
>>>>>>>>>>>>>> VM template VCPU 1 NIC
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> MAC 02:00:c0:a8:96:67 NETWORK_ID 1 VLAN NO NETWORK_UNAME
>>>>>>>>>>>>>> oneadmin BRIDGE br0 NETWORK localhost IP 192.168.150.103
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> ERROR
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> TIMESTAMP Thu Mar 14 16:16:41 2013 MESSAGE Error
>>>>>>>>>>>>>> deploying virtual machine: Could not create domain from
>>>>>>>>>>>>>> /var/lib/one/var//datastores/0/10/deployment.1
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> VMID 10 RAW
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> TYPE kvm
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> NAME one-10 DISK
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> 0
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> DATASTORE user_ds TYPE CDROM TARGET hdb SAVE NO IMAGE
>>>>>>>>>>>>>> cd-Ubuntu-precise DISK_ID 0 DEV_PREFIX hd CLONE YES
>>>>>>>>>>>>>> SOURCE
>>>>>>>>>>>>>> /var/lib/one/var/datastores/100/c2d97c815b985bece0b710a0675d1bb9
>>>>>>>>>>>>>> IMAGE_UNAME preetham IMAGE_ID 11 READONLY YES TM_MAD
>>>>>>>>>>>>>> shared DATASTORE_ID 100
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> 1
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> DATASTORE user_ds TYPE FILE TARGET hda SAVE YES
>>>>>>>>>>>>>> PERSISTENT YES IMAGE Ubuntu-precise DISK_ID 1 DEV_PREFIX
>>>>>>>>>>>>>> hd CLONE NO SOURCE
>>>>>>>>>>>>>> /var/lib/one/var/datastores/100/c1e8082f7e34c0cc91254c086f9b72de
>>>>>>>>>>>>>> IMAGE_UNAME preetham IMAGE_ID 12 READONLY NO TM_MAD shared
>>>>>>>>>>>>>> DATASTORE_ID 100
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> OS
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> ARCH x86_64 BOOT cdrom
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> MEMORY 1024 CPU 1 TEMPLATE_ID 11 GRAPHICS
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> TYPE vnc PORT 5910 KEYMAP es
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> My vm log is as follows:-
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Thu Mar 14 16:02:37 2013 [DiM][I]: New VM state is ACTIVE.
>>>>>>>>>>>>>> Thu Mar 14 16:02:37 2013 [LCM][I]: New VM state is PROLOG.
>>>>>>>>>>>>>> Thu Mar 14 16:02:37 2013 [VM][I]: Virtual Machine has no context
>>>>>>>>>>>>>> Thu Mar 14 16:03:08 2013 [TM][I]: clone: Cloning /var/lib/one/var/datastores/100/c2d97c815b985bece0b710a0675d1bb9 in opennebula:/var/lib/one/var//datastores/0/10/disk.0
>>>>>>>>>>>>>> Thu Mar 14 16:03:08 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>>>> Thu Mar 14 16:03:09 2013 [TM][I]: ln: Linking /var/lib/one/var/datastores/100/c1e8082f7e34c0cc91254c086f9b72de in opennebula:/var/lib/one/var//datastores/0/10/disk.1
>>>>>>>>>>>>>> Thu Mar 14 16:03:09 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>>>> Thu Mar 14 16:03:09 2013 [LCM][I]: New VM state is BOOT
>>>>>>>>>>>>>> Thu Mar 14 16:03:09 2013 [VMM][I]: Generating deployment file: /var/lib/one/var/vms/10/deployment.0
>>>>>>>>>>>>>> Thu Mar 14 16:03:10 2013 [VMM][I]: ExitCode: 0
>>>>>>>>>>>>>> Thu Mar 14 16:03:10 2013 [VMM][I]: Successfully execute network driver operation: pre.
>>>>>>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: Command execution fail: cat << EOT | /var/tmp/one/vmm/kvm/deploy /var/lib/one/var//datastores/0/10/deployment.0 opennebula 10 opennebula
>>>>>>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: error: Failed to create domain from /var/lib/one/var//datastores/0/10/deployment.0
>>>>>>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: error: Cannot get interface MTU on 'br0': No such deviceThu Mar 14 16:03:13 2013 [VMM][E]: Could not create domain from /var/lib/one/var//datastores/0/10/deployment.0
>>>>>>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: ExitCode: 255
>>>>>>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: Failed to execute virtualization driver operation: deploy.Thu Mar 14 16:03:13 2013 [VMM][E]: Error deploying virtual machine: Could not create domain from /var/lib/one/var//datastores/0/10/deployment.0
>>>>>>>>>>>>>> Thu Mar 14 16:03:13 2013 [DiM][I]: New VM state is FAILED
>>>>>>>>>>>>>> Thu Mar 14 16:16:04 2013 [DiM][I]: New VM state is CLEANUP.
>>>>>>>>>>>>>> Thu Mar 14 16:16:04 2013 [TM][I]: delete: Deleting /var/lib/one/var/datastores/0/10/disk.0
>>>>>>>>>>>>>> Thu Mar 14 16:16:04 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>>>> Thu Mar 14 16:16:04 2013 [TM][I]: delete: Deleting /var/lib/one/var/datastores/0/10/disk.1
>>>>>>>>>>>>>> Thu Mar 14 16:16:04 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>>>> Thu Mar 14 16:16:05 2013 [TM][I]: delete: Deleting /var/lib/one/var/datastores/0/10
>>>>>>>>>>>>>> Thu Mar 14 16:16:05 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>>>> Thu Mar 14 16:16:05 2013 [DiM][I]: New VM state is PENDING
>>>>>>>>>>>>>> Thu Mar 14 16:16:10 2013 [DiM][I]: New VM state is ACTIVE.
>>>>>>>>>>>>>> Thu Mar 14 16:16:10 2013 [LCM][I]: New VM state is PROLOG.
>>>>>>>>>>>>>> Thu Mar 14 16:16:10 2013 [VM][I]: Virtual Machine has no context
>>>>>>>>>>>>>> Thu Mar 14 16:16:36 2013 [TM][I]: clone: Cloning /var/lib/one/var/datastores/100/c2d97c815b985bece0b710a0675d1bb9 in opennebula:/var/lib/one/var//datastores/0/10/disk.0
>>>>>>>>>>>>>> Thu Mar 14 16:16:36 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>>>> Thu Mar 14 16:16:38 2013 [TM][I]: ln: Linking /var/lib/one/var/datastores/100/c1e8082f7e34c0cc91254c086f9b72de in opennebula:/var/lib/one/var//datastores/0/10/disk.1
>>>>>>>>>>>>>> Thu Mar 14 16:16:38 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>>>> Thu Mar 14 16:16:38 2013 [LCM][I]: New VM state is BOOT
>>>>>>>>>>>>>> Thu Mar 14 16:16:38 2013 [VMM][I]: Generating deployment file: /var/lib/one/var/vms/10/deployment.1
>>>>>>>>>>>>>> Thu Mar 14 16:16:39 2013 [VMM][I]: ExitCode: 0
>>>>>>>>>>>>>> Thu Mar 14 16:16:39 2013 [VMM][I]: Successfully execute network driver operation: pre.
>>>>>>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: Command execution fail: cat << EOT | /var/tmp/one/vmm/kvm/deploy /var/lib/one/var//datastores/0/10/deployment.1 opennebula 10 opennebula
>>>>>>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: error: Failed to create domain from /var/lib/one/var//datastores/0/10/deployment.1
>>>>>>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: error: Cannot get interface MTU on 'br0': No such deviceThu Mar 14 16:16:41 2013 [VMM][E]: Could not create domain from /var/lib/one/var//datastores/0/10/deployment.1
>>>>>>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: ExitCode: 255
>>>>>>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: Failed to execute virtualization driver operation: deploy.Thu Mar 14 16:16:41 2013 [VMM][E]: Error deploying virtual machine: Could not create domain from /var/lib/one/var//datastores/0/10/deployment.1
>>>>>>>>>>>>>> Thu Mar 14 16:16:41 2013 [DiM][I]: New VM state is FAILED
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> *Regards,***
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> *Preetham. N*
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> *
>>>>>>>>>>>>>> *
>>>>>>>>>>>>>> *
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> *
>>>>>>>>>>>>>> _______________________________________________ Users
>>>>>>>>>>>>>> mailing list Users at lists.opennebula.org
>>>>>>>>>>>>>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>>
>>>>>>>>>>>>> *?** Regards,***
>>>>>>>>>>>>>
>>>>>>>>>>>>> *Preetham. N*
>>>>>>>>>>>>>
>>>>>>>>>>>>> *9945072638*
>>>>>>>>>>>>> *
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> *
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>>
>>>>>>>>>>>> *?** Regards,***
>>>>>>>>>>>>
>>>>>>>>>>>> *Preetham. N*
>>>>>>>>>>>>
>>>>>>>>>>>> *9945072638*
>>>>>>>>>>>> *
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> *
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>>
>>>>>>>>>>> *?** Regards,***
>>>>>>>>>>>
>>>>>>>>>>> *Preetham. N*
>>>>>>>>>>>
>>>>>>>>>>> *9945072638*
>>>>>>>>>>> *
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> *
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>>
>>>>>>>>>> *?** Regards,***
>>>>>>>>>>
>>>>>>>>>> *Preetham. N*
>>>>>>>>>>
>>>>>>>>>> *9945072638*
>>>>>>>>>> *
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> *
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>>
>>>>>>>>> *?** Regards,***
>>>>>>>>>
>>>>>>>>> *Preetham. N*
>>>>>>>>>
>>>>>>>>> *9945072638*
>>>>>>>>> *
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> *
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> Users mailing list
>>>>>>>>> Users at lists.opennebula.org
>>>>>>>>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>>
>>>>>>> *?** Regards,***
>>>>>>>
>>>>>>> *Preetham. N*
>>>>>>>
>>>>>>> *9945072638*
>>>>>>> *
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> *
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>>
>>>>> *?** Regards,***
>>>>>
>>>>> *Preetham. N*
>>>>>
>>>>> *9945072638*
>>>>> *
>>>>>
>>>>>
>>>>>
>>>>> *
>>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>>
>>> *?** Regards,***
>>>
>>> *Preetham. N*
>>>
>>> *9945072638*
>>> *
>>>
>>>
>>>
>>> *
>>>
>>
>>
>>
>> --
>>
>> *?** Regards,***
>>
>> *Preetham. N*
>>
>> *9945072638*
>> *
>>
>>
>>
>> *
>>
>
>
>
> --
>
> *?** Regards,***
>
> *Preetham. N*
>
> *9945072638*
> *
>
>
>
> *
>
--
*?** Regards,***
*Preetham. N*
*9945072638*
*
*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20130419/cd209d0a/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: VM on 2nd host failling.png
Type: image/png
Size: 240639 bytes
Desc: not available
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20130419/cd209d0a/attachment-0002.png>
More information about the Users
mailing list