[one-users] problem in configuring vmware hyper visor
Siva Prasad
newror.user at gmail.com
Thu Nov 24 21:36:00 PST 2011
Thanks Tino For all your help.
The following worked , I installed vmware on port 443 (which is not
default 8333).So virsh was trying to talk on the default https port 8333
dats y it was failing so when I changed my uri to talk on to 443 it worked.
Thanks to my Manager :-)
--Siva
On 11/24/2011 10:54 PM, Siva Prasad wrote:
> Hi Tino,
>
> Thanks a lot it worked it moved further. (now i know How stupid
> mistake i was donig)
>
> virsh # connect gsx://10.3.3.48/?no_verify=1
> Enter username for 10.3.3.48 [root]: oneadmin
> Enter oneadmin's password for 10.3.3.48:
>
>
> I have configured the URI to be gsx in the vmwarerc file.(As my
> hypervisor is Vmware server)
> I have provided oneadmin password as oneadmin which i configured in
> vmwarerc file. And this oneadmin user is in the hypervisor macine and
> i could login with this oneadmin user into the vmware server also.But
> when I provide this password to the virsh It stays there only without
> any response (though the password is correct)
>
> Any thoughts ?
>
> -- Suser.
>
>
>
> On 11/24/2011 10:44 PM, Tino Vazquez wrote:
>> Hi,
>>
>> You don't need both connect and "-c". Try
>>
>> # connect esx://host/?no_verify=1
>>
>> Which version of libvirt are you using?
>>
>> Regards,
>>
>> -T
>>
>> --
>> Constantino Vázquez Blanco, MSc
>> Project Engineer
>> OpenNebula - The Open Source Toolkit for Data Center Virtualization
>> www.OpenNebula.org
>> <http://www.opennebula.org/> | @tinova79 | @OpenNebula
>>
>>
>>
>> On Thu, Nov 24, 2011 at 6:05 PM, Siva Prasad <newror.user at gmail.com
>> <mailto:newror.user at gmail.com>> wrote:
>>
>> yes i have installed libvirt with ./configure --wtih-esxi
>>
>> --Suser
>>
>>
>> On 11/24/2011 10:30 PM, Tino Vazquez wrote:
>>> Hi,
>>>
>>> Do you have libvirt installed with VMware support? Which version
>>> of libvirt is it?
>>>
>>> Regards,
>>>
>>> -Tino
>>>
>>> --
>>> Constantino Vázquez Blanco, MSc
>>> Project Engineer
>>> OpenNebula - The Open Source Toolkit for Data Center Virtualization
>>> www.OpenNebula.org
>>> <http://www.opennebula.org/> | @tinova79 | @OpenNebula
>>>
>>>
>>>
>>> On Thu, Nov 24, 2011 at 5:33 PM, Siva Prasad
>>> <newror.user at gmail.com <mailto:newror.user at gmail.com>> wrote:
>>>
>>> HI Tino,
>>>
>>> I was followoing 2.2 documentation itself.
>>>
>>> So I had installed openNebula 2.2
>>> and vmware addon 2.2 itself.
>>>
>>> *Now I get the following:*
>>> ---------------------------------
>>>
>>>
>>> virsh # connect "-c gsx:// 10.3.3.48/?no_verify=1
>>> <http://10.3.3.48/?no_verify=1>"
>>>
>>> error: Failed to connect to the hypervisor
>>> error: invalid argument: could not parse connection URI -c
>>> gsx://10.3.3.48/?no_verify=1 <http://10.3.3.48/?no_verify=1>
>>>
>>> virsh # connect -c gsx://10.3.3.48/?no_verify=1
>>> <http://10.3.3.48/?no_verify=1>
>>> error: unexpected data 'gsx://10.3.3.48/?no_verify=1
>>> <http://10.3.3.48/?no_verify=1>'
>>>
>>> virsh#
>>>
>>> ------------------------------------------------------------
>>>
>>> Actually my onevm commands all work fine.( I know this has
>>> nothing to do till i try to setup a host or launch a vm)
>>> do we need to have the accessible nfs storage to the
>>> hypervisor inorder *"virsh # connect "-c gsx://
>>> 10.3.3.48/?no_verify=1 <http://10.3.3.48/?no_verify=1>" *to
>>> work?
>>>
>>>
>>> I have not yet shared a folder over Nfs.
>>>
>>> Any help is appreciated.
>>>
>>> Thanks,
>>> Suser
>>>
>>>
>>>
>>>
>>>
>>> On 11/24/2011 4:10 PM, Tino Vazquez wrote:
>>>> Hi Siva,
>>>>
>>>> comments inline,
>>>>
>>>> On Thu, Nov 24, 2011 at 10:07 AM, Siva Prasad
>>>> <newror.user at gmail.com <mailto:newror.user at gmail.com>> wrote:
>>>>
>>>> Hi Guys,
>>>>
>>>> I am setting up openNebula on ubuntu11.04. and I am
>>>> trying to configure the VMwaresServer hypervisor but
>>>> no luck.The below are the steps i have done.
>>>>
>>>> 1) Installed ubuntu and openbnebula 2.0.1
>>>>
>>>>
>>>> you are using a rather old version, i suggest you upgrade
>>>> to the last stable (v3.0), or v2.2 if you want to use a
>>>> stable version of the vmware drivers as well.
>>>>
>>>> 2) installed the libvirt.
>>>> 3) installed vmwareaddon 2.2
>>>>
>>>>
>>>> vmware addon drivers 2.2 are compatible with opennebula 2.2
>>>>
>>>> 4) configured password and esx to gsx in the
>>>> /etc/one/vmwarerc file.(the same password is there on
>>>> my vmware server hypervisor which I installed on
>>>> windows XP).
>>>> 5) changed the datastore in
>>>> /etc/one/vmm_sh/vmm_sh_vmware.conf
>>>>
>>>>
>>>> I could not connect to the hypervisor using hte virsh
>>>> command line. I get the following error.
>>>>
>>>> *virsh #* connect 10.3.3.48
>>>> error: Failed to connect to the hypervisor
>>>> error: no connection driver available for No connection
>>>> for URI 10.3.3.48
>>>>
>>>>
>>>> you need to connect with a "-c esx://<host>/?no_verify=1" URI
>>>>
>>>>
>>>> *virsh #*
>>>>
>>>>
>>>> I could ping 10.3.3.48
>>>>
>>>> NOTE:Should I install certificate in the keystore. This
>>>> is ubuntu 2.0.1 does it need key in the keystore? I
>>>> thought theres no need to do this.
>>>>
>>>>
>>>> No, you don't need to do this. Just out of curiosity, which
>>>> documentation are you following?
>>>>
>>>> Regards,
>>>>
>>>> -T
>>>>
>>>> Can anybody help me.
>>>>
>>>> --Suser
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at lists.opennebula.org
>>>> <mailto:Users at lists.opennebula.org>
>>>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>>>
>>>>
>>>
>>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20111125/67a9a370/attachment-0003.htm>
More information about the Users
mailing list