[one-users] Problem deploying Windows Vista VM in opennebula 1.2

[Jack Jill]

Could you ssh to the machine that attempted to bring up the VM and post the
contents of the "deployment.0" file for VM 13. Also, post the VM 13 log on
the ONE controller machine.

The file you attached has the following ONE template as part of the
contents. It seems corrupted - notice the "3D" chars all over the place.

<quote>

NAME=3DLinux
CPU=3D0.25
MEMORY=3D128
OS=3D[type=3Dhvm, boot=3Dhd]
DISK =3D[source=3D"/root/teaas/images/Vyatta.img", clone=3Dyes, target=3Dhd=
a, readonly=3Dno]
NIC=3D[network =3D"Private_VLAN"]
GRAPHICS =3D[type =3D"vnc",listen =3D"127.0.0.1", port =3D "1"]

</quote>

-- 
Thanks,
Rosh
http://blogs.plexibus.com


On Wed, Mar 24, 2010 at 4:54 AM, Harishbabu Nagaraj <
Harishbabu_Nagaraj at mindtree.com> wrote:

>  Hi Jack,
>
>     Thank you very much for the answer. This solved the problem and able to
> boot Windows Vista. But I am still having no clue on booting any VM using
> Opennebula 1.4. Please find the enclosed mail for the details. It would be
> great if somebody can throw some light on this issue.
>
>
>
> Awaiting your response.
>
> Thanks in Advance.
>
>
>
> *Thanks,*
>
> *Harish *
>
> *From:* Jack Jill [mailto:jacknjill111 at gmail.com]
> *Sent:* Tuesday, March 23, 2010 6:12 PM
> *To:* Harishbabu Nagaraj
> *Cc:* users at lists.opennebula.org
> *Subject:* Re: [one-users] Problem deploying Windows Vista VM in
> opennebula 1.2
>
>
>
> I believe the correct setting is:
>
> FEATURES = [ acpi="yes" ]
>
> --
> Thanks,
> Rosh
> http://blogs.plexibus.com
>
>  On Tue, Mar 23, 2010 at 12:36 AM, Harishbabu Nagaraj <
> Harishbabu_Nagaraj at mindtree.com> wrote:
>
> Dear All,
>
>               I thought some configuration regarding ACPI is not proper,
> then I added the following line to config.txt,
>
> FEATURES=[acpi={yes}]
>
> Now also I am getting the same error (“Windows failed to load because the
> firmware (BIOS) is not ACPI compatible“)when the VM boots up. Also
> configuration parameter of acpi is not getting updated in the deployment.0
> file.  I tried with both the configuration parameter of yes as well as no.
> But still  I am getting the same above error.
>
>
>
> Please suggest how to go about solving this issue.
>
>
>
>
>
> *Thanks and Regards,*
>
> *Harish *
>
> *From:* Harishbabu Nagaraj
> *Sent:* Monday, March 22, 2010 12:08 PM
> *To:* 'users at lists.opennebula.org'
> *Cc:* 'users-bounces at lists.opennebula.org'; Sudip Naha
> *Subject:* Problem deploying Windows Vista VM in opennebula 1.2
>
>
>
> Dear All,
>
>              I am able to deploy windows XP image and some Linux images
> using opennebula 1.2 on Fedora core 12 with KVM.  I could able to add the
> host machine using onehost command successfully. When I tried to deploy the
> Windows Vista VM using “onevm create config.txt”,
>
> Config.txt file is as follows,
>
> NAME=WinVista
>
> CPU=0.25
>
> MEMORY=1024
>
> OS=[type=hvm, boot=hd]
>
> DISK =[source=”/root/teaas/images/winvista.img”, clone=yes, target=hda,
> readonly=no]
>
> NIC=[network =”Private_VLAN”]
>
> GRAPHICS =[type =”vnc”,listen =”127.0.0.1”, port = “1”]
>
>
>
> The status of onevm shows running but if I see the virtual machine console,
> it is throwing the error “Windows failed to load because the firmware (BIOS)
> is not ACPI compatible“. Do I need to add any more configurations for ACPI
> in config.txt, please let me know.
>
>
>
> Thanks in Advance.
>
>
>
> *Thanks and Regards,*
>
> *Harish *
>
>
>
>
>  ------------------------------
>
> http://www.mindtree.com/email/disclaimer.html
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opennebula.org
> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20100324/e61abe1c/attachment-0003.htm>