[one-users] VM in Opennebula for Esxi 5.1 failed
Tino Vazquez
tinova79 at gmail.com
Thu Nov 14 03:15:05 PST 2013
Hi Catalina,
I am not sure about ESX support for flash drives. You should check the
ESX documentation.
Regards,
-Tino
--
Constantino Vázquez Blanco, PhD, MSc
Senior Infrastructure Architect at C12G Labs
www.OpenNebula.org | @tinova79 | es.linkedin.com/in/tinova
On Wed, Nov 13, 2013 at 5:43 AM, Catalina Quinde
<catalinaquinde at gmail.com> wrote:
> Tino,
>
> In my case Esxi is installed on a flash memory and the computer hard disk
> has partitions with several other hypervisors
>
> I used Vsphere client to create the datastores 102 and 103, with the options
> Add Datastore, Disk / LUN .... but on the screen where you select the hard
> disk on which to create the datastores, displayed the original computer hard
> drive and not flash memory where you really should add the datastore, then,
> there is an error message for creating datastore.
>
> Can not change the host configuration
> Call "HostDatastoreSystem.QueryVmfsDatastoreCreateOptions" for object
> "ha-datastoresystem" on ESXi "192 168 147 131" failed....
>
> Esxi is installed in flash memory.
>
> Regards, Caty.
>
>
> 2013/11/12 < users-request at lists.opennebula.org>
>>
>> Send Users mailing list submissions to
>> users at lists.opennebula.org
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> or, via email, send a message with subject or body 'help' to
>> users-request at lists.opennebula.org
>>
>> You can reach the person managing the list at
>> users-owner at lists.opennebula.org
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of Users digest..."
>>
>>
>> Today's Topics:
>>
>> 1. Re: VM in Opennebula for Esxi 5.1 failed (Tino Vazquez)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Tue, 12 Nov 2013 18:36:43 +0100
>> From: Tino Vazquez <tinova79 at gmail.com>
>> To: Catalina Quinde <catalinaquinde at gmail.com>
>> Cc: users <users at lists.opennebula.org>
>> Subject: Re: [one-users] VM in Opennebula for Esxi 5.1 failed
>> Message-ID:
>>
>> <CAHfKwc2LoKDt97kPZAjB4tCX5RqxddmbvBDRZqM6mauT1DNUvA at mail.gmail.com>
>> Content-Type: text/plain; charset=ISO-8859-1
>>
>> Hi Catalina,
>>
>> You need to mount both datastores (102 and 103) in the ESX so they can
>> access them. So, there should be the following routes present in the
>> ESX
>>
>> * /vmfs/volumes/102
>> * /vmfs/volumes/103
>>
>> Regards,
>>
>> -Tino
>> --
>> Constantino V?zquez Blanco, PhD, MSc
>> Senior Infrastructure Architect at C12G Labs
>> www.OpenNebula.org | @tinova79 | es.linkedin.com/in/tinova
>>
>>
>> On Tue, Nov 12, 2013 at 4:52 PM, Catalina Quinde
>> <catalinaquinde at gmail.com> wrote:
>> > Tino, as I explained there are no directories created 102 and 103 in the
>> > /
>> > vmfs / volumes on node Esxi.
>> >
>> > Thanks Tino.
>> >
>> >
>> > 2013/11/12 <users-request at lists.opennebula.org>
>> >>
>> >> Send Users mailing list submissions to
>> >> users at lists.opennebula.org
>> >>
>> >> To subscribe or unsubscribe via the World Wide Web, visit
>> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >> or, via email, send a message with subject or body 'help' to
>> >> users-request at lists.opennebula.org
>> >>
>> >> You can reach the person managing the list at
>> >> users-owner at lists.opennebula.org
>> >>
>> >> When replying, please edit your Subject line so it is more specific
>> >> than "Re: Contents of Users digest..."
>> >>
>> >>
>> >> Today's Topics:
>> >>
>> >> 1. Re: VM in Opennebula for Esxi 5.1 failed (Tino Vazquez)
>> >>
>> >>
>> >> ----------------------------------------------------------------------
>> >>
>> >> Message: 1
>> >> Date: Tue, 12 Nov 2013 15:16:23 +0100
>> >> From: Tino Vazquez <cvazquez at c12g.com>
>> >> To: Catalina Quinde <catalinaquinde at gmail.com>
>> >> Cc: users <users at lists.opennebula.org>
>> >> Subject: Re: [one-users] VM in Opennebula for Esxi 5.1 failed
>> >> Message-ID:
>> >>
>> >> <CAHfKwc1w930-f9oDhbLRG4GEzK9Au9HrC0D12nO8bjKqqF23dg at mail.gmail.com>
>> >> Content-Type: text/plain; charset=ISO-8859-1
>> >>
>> >> Hi Catalina,
>> >>
>> >> Could you make sure that datastores 102 and 103 are mounted in the ESX
>> >> hosts?
>> >>
>> >> Regards,
>> >>
>> >> -Tino
>> >>
>> >> --
>> >> OpenNebula - Flexible Enterprise Cloud Made Simple
>> >>
>> >> --
>> >> Constantino V?zquez Blanco, PhD, MSc
>> >> Senior Infrastructure Architect at C12G Labs
>> >> www.c12g.com | @C12G | es.linkedin.com/in/tinova
>> >>
>> >> --
>> >> Confidentiality Warning: The information contained in this e-mail and
>> >> any accompanying documents, unless otherwise expressly indicated, is
>> >> confidential and privileged, and is intended solely for the person
>> >> and/or entity to whom it is addressed (i.e. those identified in the
>> >> "To" and "cc" box). They are the property of C12G Labs S.L..
>> >> Unauthorized distribution, review, use, disclosure, or copying of this
>> >> communication, or any part thereof, is strictly prohibited and may be
>> >> unlawful. If you have received this e-mail in error, please notify us
>> >> immediately by e-mail at abuse at c12g.com and delete the e-mail and
>> >> attachments and any copy from your system. C12G thanks you for your
>> >> cooperation.
>> >>
>> >>
>> >> On Tue, Nov 12, 2013 at 10:55 AM, Tino Vazquez <cvazquez at c12g.com>
>> >> wrote:
>> >> > Hi Catalina,
>> >> >
>> >> > So, the connectivity to the host seems to be OK, but still the
>> >> > monitor
>> >> > data doesn't look valid. Let's try to figure out why.
>> >> >
>> >> > What's the output of the following (as oneadmin, in the front-end)
>> >> >
>> >> > $ ssh 92.168.147.131 "df -m | grep /vmfs/volumes/103"
>> >> >
>> >> > Regards,
>> >> >
>> >> > -Tino
>> >> > --
>> >> > OpenNebula - Flexible Enterprise Cloud Made Simple
>> >> >
>> >> > --
>> >> > Constantino V?zquez Blanco, PhD, MSc
>> >> > Senior Infrastructure Architect at C12G Labs
>> >> > www.c12g.com | @C12G | es.linkedin.com/in/tinova
>> >> >
>> >> > --
>> >> > Confidentiality Warning: The information contained in this e-mail and
>> >> > any accompanying documents, unless otherwise expressly indicated, is
>> >> > confidential and privileged, and is intended solely for the person
>> >> > and/or entity to whom it is addressed (i.e. those identified in the
>> >> > "To" and "cc" box). They are the property of C12G Labs S.L..
>> >> > Unauthorized distribution, review, use, disclosure, or copying of
>> >> > this
>> >> > communication, or any part thereof, is strictly prohibited and may be
>> >> > unlawful. If you have received this e-mail in error, please notify us
>> >> > immediately by e-mail at abuse at c12g.com and delete the e-mail and
>> >> > attachments and any copy from your system. C12G thanks you for your
>> >> > cooperation.
>> >> >
>> >> >
>> >> > On Mon, Nov 11, 2013 at 8:20 PM, Catalina Quinde
>> >> > <catalinaquinde at gmail.com> wrote:
>> >> >> Hi Tino, this displays
>> >> >>
>> >> >> oneadmin at ubuntuOpNeb:~$ bash -x
>> >> >> /var/lib/one/remotes/datastore/vmfs/monitor
>> >> >>
>> >> >>
>> >> >> 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
>> W0N
>> >>
>> >>
>> >> EQVRBW0lNQUdFX0RTXV0+PC9UWVBFPjwvVEVNUExBVEU+PC9EQVRBU1RPUkU+PC9EU19EUklWRVJfQUNUSU9OX0RBVEE+
>> >> >> 103
>> >> >> + '[' -z '' ']'
>> >> >> + LIB_LOCATION=/usr/lib/one
>> >> >> + . /usr/lib/one/sh/scripts_common.sh
>> >> >> ++ export LANG=C
>> >> >> ++ LANG=C
>> >> >> ++ export
>> >> >>
>> >> >>
>> >> >> PATH=/bin:/sbin:/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
>> >> >> ++
>> >> >>
>> >> >>
>> >> >> PATH=/bin:/sbin:/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
>> >> >> ++ AWK=awk
>> >> >> ++ BASH=bash
>> >> >> ++ CUT=cut
>> >> >> ++ DATE=date
>> >> >> ++ DD=dd
>> >> >> ++ DU=du
>> >> >> ++ GREP=grep
>> >> >> ++ ISCSIADM=iscsiadm
>> >> >> ++ LVCREATE=lvcreate
>> >> >> ++ LVREMOVE=lvremove
>> >> >> ++ LVRENAME=lvrename
>> >> >> ++ LVS=lvs
>> >> >> ++ LN=ln
>> >> >> ++ MD5SUM=md5sum
>> >> >> ++ MKFS=mkfs
>> >> >> ++ MKISOFS=genisoimage
>> >> >> ++ MKSWAP=mkswap
>> >> >> ++ QEMU_IMG=qemu-img
>> >> >> ++ RADOS=rados
>> >> >> ++ RBD=rbd
>> >> >> ++ READLINK=readlink
>> >> >> ++ RM=rm
>> >> >> ++ SCP=scp
>> >> >> ++ SED=sed
>> >> >> ++ SSH=ssh
>> >> >> ++ SUDO=sudo
>> >> >> ++ SYNC=sync
>> >> >> ++ TAR=tar
>> >> >> ++ TGTADM=tgtadm
>> >> >> ++ TGTADMIN=tgt-admin
>> >> >> ++ TGTSETUPLUN=tgt-setup-lun-one
>> >> >> ++ VMKFSTOOLS=vmkfstools
>> >> >> ++ WGET=wget
>> >> >> +++ uname -s
>> >> >> ++ '[' xLinux = xLinux ']'
>> >> >> ++ SED='sed -r'
>> >> >> +++ basename /var/lib/one/remotes/datastore/vmfs/monitor
>> >> >> ++ SCRIPT_NAME=monitor
>> >> >> ++ dirname /var/lib/one/remotes/datastore/vmfs/monitor
>> >> >> + DRIVER_PATH=/var/lib/one/remotes/datastore/vmfs
>> >> >> + source /var/lib/one/remotes/datastore/vmfs/../libfs.sh
>> >> >> +
>> >> >>
>> >> >>
>> >> >> DRV_ACTION=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
>> jxU
>> >>
>> >>
>> >> WVBFPjwhW0NEQVRBW0lNQUdFX0RTXV0+PC9UWVBFPjwvVEVNUExBVEU+PC9EQVRBU1RPUkU+PC9EU19EUklWRVJfQUNUSU9OX0RBVEE+
>> >> >> + ID=103
>> >> >> + XPATH='/var/lib/one/remotes/datastore/vmfs/../xpath.rb -b
>> >> >>
>> >> >>
>> >> >> 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
>> W0N
>> >>
>> >>
>> >> EQVRBW0lNQUdFX0RTXV0+PC9UWVBFPjwvVEVNUExBVEU+PC9EQVRBU1RPUkU+PC9EU19EUklWRVJfQUNUSU9OX0RBVEE+'
>> >> >> + unset i XPATH_ELEMENTS
>> >> >> + IFS=
>> >> >> + read -r -d '' element
>> >> >> ++ /var/lib/one/remotes/datastore/vmfs/../xpath.rb -b
>> >> >>
>> >> >>
>> >> >> 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
>> W0N
>> >>
>> >>
>> >> EQVRBW0lNQUdFX0RTXV0+PC9UWVBFPjwvVEVNUExBVEU+PC9EQVRBU1RPUkU+PC9EU19EUklWRVJfQUNUSU9OX0RBVEE+
>> >> >> /DS_DRIVER_ACTION_DATA/DATASTORE/BASE_PATH
>> >> >> /DS_DRIVER_ACTION_DATA/DATASTORE/TEMPLATE/BRIDGE_LIST
>> >> >> + XPATH_ELEMENTS[i++]=/vmfs/volumes/103
>> >> >> + IFS=
>> >> >> + read -r -d '' element
>> >> >> + XPATH_ELEMENTS[i++]=192.168.147.131
>> >> >> + IFS=
>> >> >> + read -r -d '' element
>> >> >> + BASE_PATH=/vmfs/volumes/103
>> >> >> + BRIDGE_LIST=192.168.147.131
>> >> >> ++ get_destination_host 103
>> >> >> ++ HOSTS_ARRAY=($BRIDGE_LIST)
>> >> >> +++ expr 103 % 1
>> >> >> ++ ARRAY_INDEX=0
>> >> >> ++ echo 192.168.147.131
>> >> >> + HOST=192.168.147.131
>> >> >> ++ cat
>> >> >> + MONITOR_SCRIPT='USED_MB=$(du -sLm /vmfs/volumes/103 2>/dev/null |
>> >> >> cut
>> >> >> -f1)
>> >> >>
>> >> >> DF_STR=$(df -m | grep /vmfs/volumes/103 | sed '\''s/ \+/:/g'\'')
>> >> >>
>> >> >> TOTAL_MB=$(echo $DF_STR | cut -d'\'':'\'' -f 2)
>> >> >> FREE_MB=$(echo $DF_STR | cut -d'\'':'\'' -f 4)
>> >> >>
>> >> >> echo "USED_MB=$USED_MB"
>> >> >> echo "TOTAL_MB=$TOTAL_MB"
>> >> >> echo "FREE_MB=$FREE_MB"'
>> >> >> ++ ssh_monitor_and_log 192.168.147.131 'USED_MB=$(du -sLm
>> >> >> /vmfs/volumes/103
>> >> >> 2>/dev/null | cut -f1)
>> >> >>
>> >> >> DF_STR=$(df -m | grep /vmfs/volumes/103 | sed '\''s/ \+/:/g'\'')
>> >> >>
>> >> >> TOTAL_MB=$(echo $DF_STR | cut -d'\'':'\'' -f 2)
>> >> >> FREE_MB=$(echo $DF_STR | cut -d'\'':'\'' -f 4)
>> >> >>
>> >> >> echo "USED_MB=$USED_MB"
>> >> >> echo "TOTAL_MB=$TOTAL_MB"
>> >> >> echo "FREE_MB=$FREE_MB"'
>> >> >> + MONITOR_DATA='+++ ssh 192.168.147.131 sh -s
>> >> >> ++ SSH_EXEC_OUT='\''USED_MB=
>> >> >> TOTAL_MB=
>> >> >> FREE_MB='\''
>> >> >> ++ SSH_EXEC_RC=0
>> >> >> ++ '\''['\'' 0 -ne 0 '\'']'\''
>> >> >> ++ echo USED_MB= TOTAL_MB= FREE_MB=
>> >> >> USED_MB= TOTAL_MB= FREE_MB='
>> >> >> + MONITOR_STATUS=0
>> >> >> + '[' 0 = 0 ']'
>> >> >> + tr ' ' '\n'
>> >> >> + echo '+++ ssh 192.168.147.131 sh -s
>> >> >> ++ SSH_EXEC_OUT='\''USED_MB=
>> >> >> TOTAL_MB=
>> >> >> FREE_MB='\''
>> >> >> ++ SSH_EXEC_RC=0
>> >> >> ++ '\''['\'' 0 -ne 0 '\'']'\''
>> >> >> ++ echo USED_MB= TOTAL_MB= FREE_MB=
>> >> >> USED_MB= TOTAL_MB= FREE_MB='
>> >> >> +++
>> >> >> ssh
>> >> >> 192.168.147.131
>> >> >> sh
>> >> >> -s
>> >> >> ++
>> >> >> SSH_EXEC_OUT='USED_MB=
>> >> >> TOTAL_MB=
>> >> >> FREE_MB='
>> >> >> ++
>> >> >> SSH_EXEC_RC=0
>> >> >> ++
>> >> >> '['
>> >> >> 0
>> >> >> -ne
>> >> >> 0
>> >> >> ']'
>> >> >> ++
>> >> >> echo
>> >> >> USED_MB=
>> >> >> TOTAL_MB=
>> >> >> FREE_MB=
>> >> >> USED_MB=
>> >> >> TOTAL_MB=
>> >> >> FREE_MB=
>> >> >> oneadmin at ubuntuOpNeb:~$
>> >> >>
>> >> >>
>> >> >>
>> >> >> 2013/11/11 <users-request at lists.opennebula.org>
>> >> >>>
>> >> >>> Send Users mailing list submissions to
>> >> >>> users at lists.opennebula.org
>> >> >>>
>> >> >>> To subscribe or unsubscribe via the World Wide Web, visit
>> >> >>>
>> >> >>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >> >>> or, via email, send a message with subject or body 'help' to
>> >> >>> users-request at lists.opennebula.org
>> >> >>>
>> >> >>> You can reach the person managing the list at
>> >> >>> users-owner at lists.opennebula.org
>> >> >>>
>> >> >>> When replying, please edit your Subject line so it is more specific
>> >> >>> than "Re: Contents of Users digest..."
>> >> >>>
>> >> >>>
>> >> >>> Today's Topics:
>> >> >>>
>> >> >>> 1. Re: VM in Opennebula for Esxi 5.1 failed (Tino Vazquez)
>> >> >>>
>> >> >>>
>> >> >>>
>> >> >>> ----------------------------------------------------------------------
>> >> >>>
>> >> >>> Message: 1
>> >> >>> Date: Mon, 11 Nov 2013 18:20:21 +0100
>> >> >>> From: Tino Vazquez <cvazquez at c12g.com>
>> >> >>> To: Catalina Quinde <catalinaquinde at gmail.com>
>> >> >>> Cc: users <users at lists.opennebula.org>
>> >> >>> Subject: Re: [one-users] VM in Opennebula for Esxi 5.1 failed
>> >> >>> Message-ID:
>> >> >>>
>> >> >>>
>> >> >>> <CAHfKwc3Q1_pp_Xg6p9TujOyELvrSZuzzp=E+FzCKovmEEUaS8A at mail.gmail.com>
>> >> >>> Content-Type: text/plain; charset=ISO-8859-1
>> >> >>>
>> >> >>> Hi Catalina,
>> >> >>>
>> >> >>> You need to execute it as a single line. you can copy it from this
>> >> >>> gist:
>> >> >>>
>> >> >>> https://gist.github.com/jfontan/aea29c477d597f3c97f8
>> >> >>>
>> >> >>> Regards,
>> >> >>>
>> >> >>> -Tino
>> >> >>>
>> >> >>> --
>> >> >>> OpenNebula - Flexible Enterprise Cloud Made Simple
>> >> >>>
>> >> >>> --
>> >> >>> Constantino V?zquez Blanco, PhD, MSc
>> >> >>> Senior Infrastructure Architect at C12G Labs
>> >> >>> www.c12g.com | @C12G | es.linkedin.com/in/tinova
>> >> >>>
>> >> >>> --
>> >> >>> Confidentiality Warning: The information contained in this e-mail
>> >> >>> and
>> >> >>> any accompanying documents, unless otherwise expressly indicated,
>> >> >>> is
>> >> >>> confidential and privileged, and is intended solely for the person
>> >> >>> and/or entity to whom it is addressed (i.e. those identified in the
>> >> >>> "To" and "cc" box). They are the property of C12G Labs S.L..
>> >> >>> Unauthorized distribution, review, use, disclosure, or copying of
>> >> >>> this
>> >> >>> communication, or any part thereof, is strictly prohibited and may
>> >> >>> be
>> >> >>> unlawful. If you have received this e-mail in error, please notify
>> >> >>> us
>> >> >>> immediately by e-mail at abuse at c12g.com and delete the e-mail and
>> >> >>> attachments and any copy from your system. C12G thanks you for your
>> >> >>> cooperation.
>> >> >>>
>> >> >>>
>> >> >>> On Mon, Nov 11, 2013 at 6:14 PM, Catalina Quinde
>> >> >>> <catalinaquinde at gmail.com> wrote:
>> >> >>> > Ready this command displays
>> >> >>> >
>> >> >>> > oneadmin at ubuntuOpNeb:~$ bash -x
>> >> >>> > /var/lib/one/remotes/datastore/vmfs/monitor
>> >> >>> > + '[' -z '' ']'
>> >> >>> > + LIB_LOCATION=/usr/lib/one
>> >> >>> > + . /usr/lib/one/sh/scripts_common.sh
>> >> >>> > ++ export LANG=C
>> >> >>> > ++ LANG=C
>> >> >>> > ++ export
>> >> >>> >
>> >> >>> >
>> >> >>> >
>> >> >>> > PATH=/bin:/sbin:/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
>> >> >>> > ++
>> >> >>> >
>> >> >>> >
>> >> >>> >
>> >> >>> > PATH=/bin:/sbin:/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
>> >> >>> > ++ AWK=awk
>> >> >>> > ++ BASH=bash
>> >> >>> > ++ CUT=cut
>> >> >>> > ++ DATE=date
>> >> >>> > ++ DD=dd
>> >> >>> > ++ DU=du
>> >> >>> > ++ GREP=grep
>> >> >>> > ++ ISCSIADM=iscsiadm
>> >> >>> > ++ LVCREATE=lvcreate
>> >> >>> > ++ LVREMOVE=lvremove
>> >> >>> > ++ LVRENAME=lvrename
>> >> >>> > ++ LVS=lvs
>> >> >>> > ++ LN=ln
>> >> >>> > ++ MD5SUM=md5sum
>> >> >>> > ++ MKFS=mkfs
>> >> >>> > ++ MKISOFS=genisoimage
>> >> >>> > ++ MKSWAP=mkswap
>> >> >>> > ++ QEMU_IMG=qemu-img
>> >> >>> > ++ RADOS=rados
>> >> >>> > ++ RBD=rbd
>> >> >>> > ++ READLINK=readlink
>> >> >>> > ++ RM=rm
>> >> >>> > ++ SCP=scp
>> >> >>> > ++ SED=sed
>> >> >>> > ++ SSH=ssh
>> >> >>> > ++ SUDO=sudo
>> >> >>> > ++ SYNC=sync
>> >> >>> > ++ TAR=tar
>> >> >>> > ++ TGTADM=tgtadm
>> >> >>> > ++ TGTADMIN=tgt-admin
>> >> >>> > ++ TGTSETUPLUN=tgt-setup-lun-one
>> >> >>> > ++ VMKFSTOOLS=vmkfstools
>> >> >>> > ++ WGET=wget
>> >> >>> > +++ uname -s
>> >> >>> > ++ '[' xLinux = xLinux ']'
>> >> >>> > ++ SED='sed -r'
>> >> >>> > +++ basename /var/lib/one/remotes/datastore/vmfs/monitor
>> >> >>> > ++ SCRIPT_NAME=monitor
>> >> >>> > ++ dirname /var/lib/one/remotes/datastore/vmfs/monitor
>> >> >>> > + DRIVER_PATH=/var/lib/one/remotes/datastore/vmfs
>> >> >>> > + source /var/lib/one/remotes/datastore/vmfs/../libfs.sh
>> >> >>> > + DRV_ACTION=
>> >> >>> > + ID=
>> >> >>> > + XPATH='/var/lib/one/remotes/datastore/vmfs/../xpath.rb -b '
>> >> >>> > + unset i XPATH_ELEMENTS
>> >> >>> > + IFS=
>> >> >>> > + read -r -d '' element
>> >> >>> > ++ /var/lib/one/remotes/datastore/vmfs/../xpath.rb -b
>> >> >>> > /DS_DRIVER_ACTION_DATA/DATASTORE/BASE_PATH
>> >> >>> > /DS_DRIVER_ACTION_DATA/DATASTORE/TEMPLATE/BRIDGE_LIST
>> >> >>> > /var/lib/one/remotes/datastore/vmfs/../xpath.rb:61: undefined
>> >> >>> > method
>> >> >>> > `elements' for nil:NilClass (NoMethodError)
>> >> >>> > from /var/lib/one/remotes/datastore/vmfs/../xpath.rb:60:in
>> >> >>> > `each'
>> >> >>> > from /var/lib/one/remotes/datastore/vmfs/../xpath.rb:60
>> >> >>> > + BASE_PATH=
>> >> >>> > + BRIDGE_LIST=
>> >> >>> > ++ get_destination_host
>> >> >>> > ++ HOSTS_ARRAY=($BRIDGE_LIST)
>> >> >>> > +++ expr % 0
>> >> >>> > expr: syntax error
>> >> >>> > ++ ARRAY_INDEX=
>> >> >>> > ++ echo
>> >> >>> > + HOST=
>> >> >>> > ++ cat
>> >> >>> > + MONITOR_SCRIPT='USED_MB=$(du -sLm 2>/dev/null | cut -f1)
>> >> >>> >
>> >> >>> > DF_STR=$(df -m | grep | sed '\''s/ \+/:/g'\'')
>> >> >>> >
>> >> >>> > TOTAL_MB=$(echo $DF_STR | cut -d'\'':'\'' -f 2)
>> >> >>> > FREE_MB=$(echo $DF_STR | cut -d'\'':'\'' -f 4)
>> >> >>> >
>> >> >>> > echo "USED_MB=$USED_MB"
>> >> >>> > echo "TOTAL_MB=$TOTAL_MB"
>> >> >>> > echo "FREE_MB=$FREE_MB"'
>> >> >>> > ++ ssh_monitor_and_log 'USED_MB=$(du -sLm 2>/dev/null | cut -f1)
>> >> >>> >
>> >> >>> > DF_STR=$(df -m | grep | sed '\''s/ \+/:/g'\'')
>> >> >>> >
>> >> >>> > TOTAL_MB=$(echo $DF_STR | cut -d'\'':'\'' -f 2)
>> >> >>> > FREE_MB=$(echo $DF_STR | cut -d'\'':'\'' -f 4)
>> >> >>> >
>> >> >>> > echo "USED_MB=$USED_MB"
>> >> >>> > echo "TOTAL_MB=$TOTAL_MB"
>> >> >>> > echo "FREE_MB=$FREE_MB"'
>> >> >>> > + MONITOR_DATA='+++ ssh '\''USED_MB=$(du'\'' -sLm
>> >> >>> > '\''2>/dev/null'\''
>> >> >>> > '\''|'\'' cut '\''-f1)'\'' '\''DF_STR=$(df'\'' -m '\''|'\'' grep
>> >> >>> > '\''|'\''
>> >> >>> > sed '\'''\''\'\'''\''s/'\'' '\''\+/:/g'\''\'\'''\'')'\''
>> >> >>> > '\''TOTAL_MB=$(echo'\'' '\''$DF_STR'\'' '\''|'\'' cut
>> >> >>> > '\''-d'\''\'\'''\'':'\''\'\'''\'''\'' -f '\''2)'\''
>> >> >>> > '\''FREE_MB=$(echo'\''
>> >> >>> > '\''$DF_STR'\'' '\''|'\'' cut
>> >> >>> > '\''-d'\''\'\'''\'':'\''\'\'''\'''\''
>> >> >>> > -f
>> >> >>> > '\''4)'\'' echo '\''"USED_MB=$USED_MB"'\'' echo
>> >> >>> > '\''"TOTAL_MB=$TOTAL_MB"'\''
>> >> >>> > echo '\''"FREE_MB=$FREE_MB"'\'' sh -s
>> >> >>> > ++ SSH_EXEC_OUT=
>> >> >>> > ++ SSH_EXEC_RC=255
>> >> >>> > ++ '\''['\'' 255 -ne 0 '\'']'\''
>> >> >>> > ++ log_error '\''Command "" failed: '\''
>> >> >>> > ++ log_function ERROR '\''Command "" failed: '\''
>> >> >>> > ++ echo '\''ERROR: monitor: Command "" failed: '\''
>> >> >>> > ERROR: monitor: Command "" failed:
>> >> >>> > ++ error_message '\''Cannot monitor USED_MB=$(du -sLm
>> >> >>> > 2>/dev/null |
>> >> >>> > cut
>> >> >>> > -f1)
>> >> >>> >
>> >> >>> > DF_STR=$(df -m | grep | sed '\''\'\'''\''s/ \+/:/g'\''\'\'''\'')
>> >> >>> >
>> >> >>> > TOTAL_MB=$(echo $DF_STR | cut -d'\''\'\'''\'':'\''\'\'''\'' -f 2)
>> >> >>> > FREE_MB=$(echo $DF_STR | cut -d'\''\'\'''\'':'\''\'\'''\'' -f 4)
>> >> >>> >
>> >> >>> > echo "USED_MB=$USED_MB"
>> >> >>> > echo "TOTAL_MB=$TOTAL_MB"
>> >> >>> > echo "FREE_MB=$FREE_MB"'\''
>> >> >>> > ++ echo '\''ERROR MESSAGE --8<------'\''
>> >> >>> > ERROR MESSAGE --8<------
>> >> >>> > ++ echo '\''Cannot monitor USED_MB=$(du -sLm 2>/dev/null | cut
>> >> >>> > -f1)
>> >> >>> >
>> >> >>> > DF_STR=$(df -m | grep | sed '\''\'\'''\''s/ \+/:/g'\''\'\'''\'')
>> >> >>> >
>> >> >>> > TOTAL_MB=$(echo $DF_STR | cut -d'\''\'\'''\'':'\''\'\'''\'' -f 2)
>> >> >>> > FREE_MB=$(echo $DF_STR | cut -d'\''\'\'''\'':'\''\'\'''\'' -f 4)
>> >> >>> >
>> >> >>> > echo "USED_MB=$USED_MB"
>> >> >>> > echo "TOTAL_MB=$TOTAL_MB"
>> >> >>> > echo "FREE_MB=$FREE_MB"'\''
>> >> >>> > Cannot monitor USED_MB=$(du -sLm 2>/dev/null | cut -f1)
>> >> >>> >
>> >> >>> > DF_STR=$(df -m | grep | sed '\''s/ \+/:/g'\'')
>> >> >>> >
>> >> >>> > TOTAL_MB=$(echo $DF_STR | cut -d'\'':'\'' -f 2)
>> >> >>> > FREE_MB=$(echo $DF_STR | cut -d'\'':'\'' -f 4)
>> >> >>> >
>> >> >>> > echo "USED_MB=$USED_MB"
>> >> >>> > echo "TOTAL_MB=$TOTAL_MB"
>> >> >>> > echo "FREE_MB=$FREE_MB"
>> >> >>> > ++ echo '\''ERROR MESSAGE ------>8--'\''
>> >> >>> > ERROR MESSAGE ------>8--
>> >> >>> > ++ exit 255'
>> >> >>> > + MONITOR_STATUS=255
>> >> >>> > + '[' 255 = 0 ']'
>> >> >>> > + echo '+++ ssh '\''USED_MB=$(du'\'' -sLm '\''2>/dev/null'\''
>> >> >>> > '\''|'\''
>> >> >>> > cut
>> >> >>> > '\''-f1)'\'' '\''DF_STR=$(df'\'' -m '\''|'\'' grep '\''|'\'' sed
>> >> >>> > '\'''\''\'\'''\''s/'\'' '\''\+/:/g'\''\'\'''\'')'\''
>> >> >>> > '\''TOTAL_MB=$(echo'\''
>> >> >>> > '\''$DF_STR'\'' '\''|'\'' cut
>> >> >>> > '\''-d'\''\'\'''\'':'\''\'\'''\'''\''
>> >> >>> > -f
>> >> >>> > '\''2)'\'' '\''FREE_MB=$(echo'\'' '\''$DF_STR'\'' '\''|'\'' cut
>> >> >>> > '\''-d'\''\'\'''\'':'\''\'\'''\'''\'' -f '\''4)'\'' echo
>> >> >>> > '\''"USED_MB=$USED_MB"'\'' echo '\''"TOTAL_MB=$TOTAL_MB"'\'' echo
>> >> >>> > '\''"FREE_MB=$FREE_MB"'\'' sh -s
>> >> >>> > ++ SSH_EXEC_OUT=
>> >> >>> > ++ SSH_EXEC_RC=255
>> >> >>> > ++ '\''['\'' 255 -ne 0 '\'']'\''
>> >> >>> > ++ log_error '\''Command "" failed: '\''
>> >> >>> > ++ log_function ERROR '\''Command "" failed: '\''
>> >> >>> > ++ echo '\''ERROR: monitor: Command "" failed: '\''
>> >> >>> > ERROR: monitor: Command "" failed:
>> >> >>> > ++ error_message '\''Cannot monitor USED_MB=$(du -sLm
>> >> >>> > 2>/dev/null |
>> >> >>> > cut
>> >> >>> > -f1)
>> >> >>> >
>> >> >>> > DF_STR=$(df -m | grep | sed '\''\'\'''\''s/ \+/:/g'\''\'\'''\'')
>> >> >>> >
>> >> >>> > TOTAL_MB=$(echo $DF_STR | cut -d'\''\'\'''\'':'\''\'\'''\'' -f 2)
>> >> >>> > FREE_MB=$(echo $DF_STR | cut -d'\''\'\'''\'':'\''\'\'''\'' -f 4)
>> >> >>> >
>> >> >>> > echo "USED_MB=$USED_MB"
>> >> >>> > echo "TOTAL_MB=$TOTAL_MB"
>> >> >>> > echo "FREE_MB=$FREE_MB"'\''
>> >> >>> > ++ echo '\''ERROR MESSAGE --8<------'\''
>> >> >>> > ERROR MESSAGE --8<------
>> >> >>> > ++ echo '\''Cannot monitor USED_MB=$(du -sLm 2>/dev/null | cut
>> >> >>> > -f1)
>> >> >>> >
>> >> >>> > DF_STR=$(df -m | grep | sed '\''\'\'''\''s/ \+/:/g'\''\'\'''\'')
>> >> >>> >
>> >> >>> > TOTAL_MB=$(echo $DF_STR | cut -d'\''\'\'''\'':'\''\'\'''\'' -f 2)
>> >> >>> > FREE_MB=$(echo $DF_STR | cut -d'\''\'\'''\'':'\''\'\'''\'' -f 4)
>> >> >>> >
>> >> >>> > echo "USED_MB=$USED_MB"
>> >> >>> > echo "TOTAL_MB=$TOTAL_MB"
>> >> >>> > echo "FREE_MB=$FREE_MB"'\''
>> >> >>> > Cannot monitor USED_MB=$(du -sLm 2>/dev/null | cut -f1)
>> >> >>> >
>> >> >>> > DF_STR=$(df -m | grep | sed '\''s/ \+/:/g'\'')
>> >> >>> >
>> >> >>> > TOTAL_MB=$(echo $DF_STR | cut -d'\'':'\'' -f 2)
>> >> >>> > FREE_MB=$(echo $DF_STR | cut -d'\'':'\'' -f 4)
>> >> >>> >
>> >> >>> > echo "USED_MB=$USED_MB"
>> >> >>> > echo "TOTAL_MB=$TOTAL_MB"
>> >> >>> > echo "FREE_MB=$FREE_MB"
>> >> >>> > ++ echo '\''ERROR MESSAGE ------>8--'\''
>> >> >>> > ERROR MESSAGE ------>8--
>> >> >>> > ++ exit 255'
>> >> >>> > +++ ssh 'USED_MB=$(du' -sLm '2>/dev/null' '|' cut '-f1)'
>> >> >>> > 'DF_STR=$(df'
>> >> >>> > -m
>> >> >>> > '|' grep '|' sed ''\''s/' '\+/:/g'\'')' 'TOTAL_MB=$(echo'
>> >> >>> > '$DF_STR'
>> >> >>> > '|'
>> >> >>> > cut
>> >> >>> > '-d'\'':'\''' -f '2)' 'FREE_MB=$(echo' '$DF_STR' '|' cut
>> >> >>> > '-d'\'':'\'''
>> >> >>> > -f
>> >> >>> > '4)' echo '"USED_MB=$USED_MB"' echo '"TOTAL_MB=$TOTAL_MB"' echo
>> >> >>> > '"FREE_MB=$FREE_MB"' sh -s
>> >> >>> > ++ SSH_EXEC_OUT=
>> >> >>> > ++ SSH_EXEC_RC=255
>> >> >>> > ++ '[' 255 -ne 0 ']'
>> >> >>> > ++ log_error 'Command "" failed: '
>> >> >>> > ++ log_function ERROR 'Command "" failed: '
>> >> >>> > ++ echo 'ERROR: monitor: Command "" failed: '
>> >> >>> > ERROR: monitor: Command "" failed:
>> >> >>> > ++ error_message 'Cannot monitor USED_MB=$(du -sLm 2>/dev/null |
>> >> >>> > cut
>> >> >>> > -f1)
>> >> >>> >
>> >> >>> > DF_STR=$(df -m | grep | sed '\''s/ \+/:/g'\'')
>> >> >>> >
>> >> >>> > TOTAL_MB=$(echo $DF_STR | cut -d'\'':'\'' -f 2)
>> >> >>> > FREE_MB=$(echo $DF_STR | cut -d'\'':'\'' -f 4)
>> >> >>> >
>> >> >>> > echo "USED_MB=$USED_MB"
>> >> >>> > echo "TOTAL_MB=$TOTAL_MB"
>> >> >>> > echo "FREE_MB=$FREE_MB"'
>> >> >>> > ++ echo 'ERROR MESSAGE --8<------'
>> >> >>> > ERROR MESSAGE --8<------
>> >> >>> > ++ echo 'Cannot monitor USED_MB=$(du -sLm 2>/dev/null | cut -f1)
>> >> >>> >
>> >> >>> > DF_STR=$(df -m | grep | sed '\''s/ \+/:/g'\'')
>> >> >>> >
>> >> >>> > TOTAL_MB=$(echo $DF_STR | cut -d'\'':'\'' -f 2)
>> >> >>> > FREE_MB=$(echo $DF_STR | cut -d'\'':'\'' -f 4)
>> >> >>> >
>> >> >>> > echo "USED_MB=$USED_MB"
>> >> >>> > echo "TOTAL_MB=$TOTAL_MB"
>> >> >>> > echo "FREE_MB=$FREE_MB"'
>> >> >>> > Cannot monitor USED_MB=$(du -sLm 2>/dev/null | cut -f1)
>> >> >>> >
>> >> >>> > DF_STR=$(df -m | grep | sed 's/ \+/:/g')
>> >> >>> >
>> >> >>> > TOTAL_MB=$(echo $DF_STR | cut -d':' -f 2)
>> >> >>> > FREE_MB=$(echo $DF_STR | cut -d':' -f 4)
>> >> >>> >
>> >> >>> > echo "USED_MB=$USED_MB"
>> >> >>> > echo "TOTAL_MB=$TOTAL_MB"
>> >> >>> > echo "FREE_MB=$FREE_MB"
>> >> >>> > ++ echo 'ERROR MESSAGE ------>8--'
>> >> >>> > ERROR MESSAGE ------>8--
>> >> >>> > ++ exit 255
>> >> >>> > + exit 255
>> >> >>> >
>> >> >>> >
>> >> >>> >
>> >> >>> > 2013/11/11 <users-request at lists.opennebula.org>
>> >> >>> >>
>> >> >>> >> Send Users mailing list submissions to
>> >> >>> >> users at lists.opennebula.org
>> >> >>> >>
>> >> >>> >> To subscribe or unsubscribe via the World Wide Web, visit
>> >> >>> >>
>> >> >>> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >> >>> >> or, via email, send a message with subject or body 'help' to
>> >> >>> >> users-request at lists.opennebula.org
>> >> >>> >>
>> >> >>> >> You can reach the person managing the list at
>> >> >>> >> users-owner at lists.opennebula.org
>> >> >>> >>
>> >> >>> >> When replying, please edit your Subject line so it is more
>> >> >>> >> specific
>> >> >>> >> than "Re: Contents of Users digest..."
>> >> >>> >>
>> >> >>> >>
>> >> >>> >> Today's Topics:
>> >> >>> >>
>> >> >>> >> 1. Re: VM in Opennebula for Esxi 5.1 failed (Hans-Joachim
>> >> >>> >> Ehlers)
>> >> >>> >>
>> >> >>> >> 2. Re: VM in Opennebula for Esxi 5.1 failed (Tino Vazquez)
>> >> >>> >>
>> >> >>> >>
>> >> >>> >>
>> >> >>> >>
>> >> >>> >> ----------------------------------------------------------------------
>> >> >>> >>
>> >> >>> >> Message: 1
>> >> >>> >> Date: Mon, 11 Nov 2013 17:55:24 +0100
>> >> >>> >> From: Hans-Joachim Ehlers <HansJoachim.Ehlers at eumetsat.int>
>> >> >>> >> To: 'Catalina Quinde' <catalinaquinde at gmail.com>,
>> >> >>> >> "Users at lists.opennebula.org"
>> >> >>> >> <Users at lists.opennebula.org>
>> >> >>> >>
>> >> >>> >> Subject: Re: [one-users] VM in Opennebula for Esxi 5.1 failed
>> >> >>> >> Message-ID:
>> >> >>> >>
>> >> >>> >>
>> >> >>> >>
>> >> >>> >>
>> >> >>> >> <A3ADF8C56ADA0F45BC34F904A6514E280151E8A95E66 at EXW10.eum.root.eumetsat.int>
>> >> >>> >>
>> >> >>> >> Content-Type: text/plain; charset="windows-1252"
>> >> >>> >>
>> >> >>> >>
>> >> >>> >> Use the following ONELINER ....
>> >> >>> >>
>> >> >>> >> $ bash -x /var/lib/one/remotes/datastore/vmfs/monitor
>> >> >>> >>
>> >> >>> >> From: users-bounces at lists.opennebula.org
>> >> >>> >> [mailto:users-bounces at lists.opennebula.org] On Behalf Of
>> >> >>> >> Catalina
>> >> >>> >> Quinde
>> >> >>> >> Sent: Monday, November 11, 2013 5:50 PM
>> >> >>> >> To: Users at lists.opennebula.org
>> >> >>> >> Subject: Re: [one-users] VM in Opennebula for Esxi 5.1 failed
>> >> >>> >>
>> >> >>> >> Hi Tino,
>> >> >>> >> The comand bash -x /var/lib/one/remotes can't execution because
>> >> >>> >> this is
>> >> >>> >> directory:
>> >> >>> >>
>> >> >>> >> oneadmin at ubuntuOpNeb:~$ bash -x /var/lib/one/remotes/
>> >> >>> >> /var/lib/one/remotes/: /var/lib/one/remotes/: es un directorio
>> >> >>> >> This directory contains:
>> >> >>> >> oneadmin at ubuntuOpNeb:~$ ls /var/lib/one/remotes/
>> >> >>> >> auth datastore hooks im scripts_common.rb scripts_common.sh
>> >> >>> >> tm
>> >> >>> >> vmm
>> >> >>> >> vnm
>> >> >>> >> -------------- next part --------------
>> >> >>> >> An HTML attachment was scrubbed...
>> >> >>> >> URL:
>> >> >>> >>
>> >> >>> >>
>> >> >>> >>
>> >> >>> >> <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20131111/5c1feeee/attachment-0001.htm>
>> >> >>> >>
>> >> >>> >> ------------------------------
>> >> >>> >>
>> >> >>> >> Message: 2
>> >> >>> >> Date: Mon, 11 Nov 2013 17:58:35 +0100
>> >> >>> >>
>> >> >>> >> From: Tino Vazquez <cvazquez at c12g.com>
>> >> >>> >> To: Catalina Quinde <catalinaquinde at gmail.com>
>> >> >>> >> Cc: users <Users at lists.opennebula.org>
>> >> >>> >> Subject: Re: [one-users] VM in Opennebula for Esxi 5.1 failed
>> >> >>> >> Message-ID:
>> >> >>> >>
>> >> >>> >>
>> >> >>> >>
>> >> >>> >> <CAHfKwc21-kkPabWgtNwQs07EbbAiC9b8zzFJwMsRt3EXb0umSg at mail.gmail.com>
>> >> >>> >> Content-Type: text/plain; charset=ISO-8859-1
>> >> >>> >>
>> >> >>> >> Hi,
>> >> >>> >>
>> >> >>> >> The following should executed in the same line:
>> >> >>> >>
>> >> >>> >> ----8<-----
>> >> >>> >> $ bash -x /var/lib/one/remotes/datastore/vmfs/monitor
>> >> >>> >>
>> >> >>> >>
>> >> >>> >>
>> >> >>> >>
>> >> >>> >> 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
>> Pjw
>> >> hW0N
>> >> >>> EQV
>> >> >>> >>
>> >> >>> >>
>> >> >>> >>
>> >> >>> >>
>> >> >>> >> RBW0lNQUdFX0RTXV0+PC9UWVBFPjwvVEVNUExBVEU+PC9EQVRBU1RPUkU+PC9EU19EUklWRVJfQUNUSU9OX0RBVEE+
>> >> >>> >> 103
>> >> >>> >> --->8-----
>> >> >>> >>
>> >> >>> >> Regards,
>> >> >>> >>
>> >> >>> >> -T
>> >> >>> >> --
>> >> >>> >> OpenNebula - Flexible Enterprise Cloud Made Simple
>> >> >>> >>
>> >> >>> >> --
>> >> >>> >> Constantino V?zquez Blanco, PhD, MSc
>> >> >>> >> Senior Infrastructure Architect at C12G Labs
>> >> >>> >> www.c12g.com | @C12G | es.linkedin.com/in/tinova
>> >> >>> >>
>> >> >>> >> --
>> >> >>> >> Confidentiality Warning: The information contained in this
>> >> >>> >> e-mail
>> >> >>> >> and
>> >> >>> >> any accompanying documents, unless otherwise expressly
>> >> >>> >> indicated,
>> >> >>> >> is
>> >> >>> >> confidential and privileged, and is intended solely for the
>> >> >>> >> person
>> >> >>> >> and/or entity to whom it is addressed (i.e. those identified in
>> >> >>> >> the
>> >> >>> >> "To" and "cc" box). They are the property of C12G Labs S.L..
>> >> >>> >> Unauthorized distribution, review, use, disclosure, or copying
>> >> >>> >> of
>> >> >>> >> this
>> >> >>> >> communication, or any part thereof, is strictly prohibited and
>> >> >>> >> may
>> >> >>> >> be
>> >> >>> >> unlawful. If you have received this e-mail in error, please
>> >> >>> >> notify
>> >> >>> >> us
>> >> >>> >> immediately by e-mail at abuse at c12g.com and delete the e-mail
>> >> >>> >> and
>> >> >>> >> attachments and any copy from your system. C12G thanks you for
>> >> >>> >> your
>> >> >>> >> cooperation.
>> >> >>> >>
>> >> >>> >>
>> >> >>> >> On Mon, Nov 11, 2013 at 5:50 PM, Catalina Quinde
>> >> >>> >> <catalinaquinde at gmail.com> wrote:
>> >> >>> >> > Hi Tino,
>> >> >>> >> >
>> >> >>> >> > The comand bash -x /var/lib/one/remotes can't execution
>> >> >>> >> > because
>> >> >>> >> > this
>> >> >>> >> > is
>> >> >>> >> > directory:
>> >> >>> >> >
>> >> >>> >> > oneadmin at ubuntuOpNeb:~$ bash -x /var/lib/one/remotes/
>> >> >>> >> > /var/lib/one/remotes/: /var/lib/one/remotes/: es un directorio
>> >> >>> >> >
>> >> >>> >> > This directory contains:
>> >> >>> >> >
>> >> >>> >> > oneadmin at ubuntuOpNeb:~$ ls /var/lib/one/remotes/
>> >> >>> >> > auth datastore hooks im scripts_common.rb
>> >> >>> >> > scripts_common.sh
>> >> >>> >> > tm
>> >> >>> >> > vmm
>> >> >>> >> > vnm
>> >> >>> >> >
>> >> >>> >> > Regards, Caty.
>> >> >>> >> >
>> >> >>> >> > 2013/11/11 Tino Vazquez <cvazquez at c12g.com>
>> >> >>> >> >>
>> >> >>> >> >> Hi,
>> >> >>> >> >>
>> >> >>> >> >> The setup looks correct, both DS 102 and 103 have the correct
>> >> >>> >> >> BASE_PATH. About the monitoring error, could you send the
>> >> >>> >> >> output
>> >> >>> >> >> of
>> >> >>> >> >> the execution of the following as oneadmin in the front-end:
>> >> >>> >> >>
>> >> >>> >> >> $ bash -x /var/lib/one/remotes/
>> >> >>> >> >> datastore/vmfs/monitor
>> >> >>> >> >> PERTX0RSSVZFUl9BQ1RJT05fREFUQT48REFUQVNUT1JFPjxJRD4xMDM8L
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >> 0lEPjxVSUQ+MDwvVUlEPjxHSUQ+MDwvR0lEPjxVTkFNRT5vbmVhZG1pbjwvVU5BTUU+PEdOQU1FPm9uZ
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >> WFkbWluPC9HTkFNRT48TkFNRT5zc2hfZGlFc3hpPC9OQU1FPjxQRVJNSVNTSU9OUz48T1dORVJfVT4xP
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >> C9PV05FUl9VPjxPV05FUl9NPjE8L09XTkVSX00+PE9XTkVSX0E+MDwvT1dORVJfQT48R1JPVVBfVT4xP
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >> C9HUk9VUF9VPjxHUk9VUF9NPjA8L0dST1VQX00+PEdST1VQX0E+MDwvR1JPVVBfQT48T1RIRVJfVT4wP
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >> C9PVEhFUl9VPjxPVEhFUl9NPjA8L09USEVSX00+PE9USEVSX0E+MDwvT1RIRVJfQT48L1BFUk1JU1NJT
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >> 05TPjxEU19NQUQ+dm1mczwvRFNfTUFEPjxUTV9NQUQ+dm1mczwvVE1fTUFEPjxCQVNFX1BBVEg+L3ZtZ
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >> nMvdm9sdW1lcy8xMDM8L0JBU0VfUEFUSD48VFlQRT4wPC9UWVBFPjxESVNLX1RZUEU+MDwvRElTS19UW
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >> VBFPjxDTFVTVEVSX0lEPjEwMDwvQ0xVU1RFUl9JRD48Q0xVU1RFUj5Fc3hpY2x1czwvQ0xVU1RFUj48V
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >> E9UQUxfTUI+MDwvVE9UQUxfTUI+PEZSRUVfTUI+MDwvRlJFRV9NQj48VVNFRF9NQj4wPC9VU0VEX01CP
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >> jxJTUFHRVM+PC9JTUFHRVM+PFRFTVBMQVRFPjxCUklER0VfTElTVD48IVtDREFUQVsxOTIuMTY4LjE0N
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >> y4xMzFdXT48L0JSSURHRV9MSVNUPjxEU19NQUQ+PCFbQ0RBVEFbdm1mc11dPjwvRFNfTUFEPjxUTV9NQ
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >> UQ+PCFbQ0RBVEFbdm1mc11dPjwvVE1fTUFEPjxUWVBFPjwhW0NEQVRBW0lNQUdFX0RTXV0+PC9UWVBFP
>> >> >>> >> >>
>> >> >>> >> >> jwvVEVNUExBVEU+PC9EQVRBU1RPUkU+PC9EU19EUklWRVJfQUNUSU9OX0RBVEE+
>> >> >>> >> >> 103
>> >> >>> >> >>
>> >> >>> >> >> Regards,
>> >> >>> >> >>
>> >> >>> >> >> -Tino
>> >> >>> >> >> --
>> >> >>> >> >> OpenNebula - Flexible Enterprise Cloud Made Simple
>> >> >>> >> >>
>> >> >>> >> >> --
>> >> >>> >> >> Constantino V?zquez Blanco, PhD, MSc
>> >> >>> >> >> Senior Infrastructure Architect at C12G Labs
>> >> >>> >> >> www.c12g.com | @C12G | es.linkedin.com/in/tinova
>> >> >>> >> >>
>> >> >>> >> >> --
>> >> >>> >> >> Confidentiality Warning: The information contained in this
>> >> >>> >> >> e-mail
>> >> >>> >> >> and
>> >> >>> >> >> any accompanying documents, unless otherwise expressly
>> >> >>> >> >> indicated, is
>> >> >>> >> >> confidential and privileged, and is intended solely for the
>> >> >>> >> >> person
>> >> >>> >> >> and/or entity to whom it is addressed (i.e. those identified
>> >> >>> >> >> in
>> >> >>> >> >> the
>> >> >>> >> >> "To" and "cc" box). They are the property of C12G Labs S.L..
>> >> >>> >> >> Unauthorized distribution, review, use, disclosure, or
>> >> >>> >> >> copying
>> >> >>> >> >> of
>> >> >>> >> >> this
>> >> >>> >> >> communication, or any part thereof, is strictly prohibited
>> >> >>> >> >> and
>> >> >>> >> >> may
>> >> >>> >> >> be
>> >> >>> >> >> unlawful. If you have received this e-mail in error, please
>> >> >>> >> >> notify
>> >> >>> >> >> us
>> >> >>> >> >> immediately by e-mail at abuse at c12g.com and delete the e-mail
>> >> >>> >> >> and
>> >> >>> >> >> attachments and any copy from your system. C12G thanks you
>> >> >>> >> >> for
>> >> >>> >> >> your
>> >> >>> >> >> cooperation.
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >> On Mon, Nov 11, 2013 at 4:25 PM, Catalina Quinde
>> >> >>> >> >> <catalinaquinde at gmail.com> wrote:
>> >> >>> >> >> > Hi friends,
>> >> >>> >> >> >
>> >> >>> >> >> > The result for command "onedatastore show' are:
>> >> >>> >> >> >
>> >> >>> >> >> > 1. For datastore system
>> >> >>> >> >> >
>> >> >>> >> >> > oneadmin at ubuntuOpNeb:~$ onedatastore show 102
>> >> >>> >> >> > DATASTORE 102 INFORMATION
>> >> >>> >> >> > ID : 102
>> >> >>> >> >> > NAME : ssh_dsEsxi
>> >> >>> >> >> > USER : oneadmin
>> >> >>> >> >> > GROUP : oneadmin
>> >> >>> >> >> > CLUSTER : Esxiclus
>> >> >>> >> >> > TYPE : SYSTEM
>> >> >>> >> >> > DS_MAD : -
>> >> >>> >> >> > TM_MAD : vmfs
>> >> >>> >> >> > BASE PATH : /vmfs/volumes/102
>> >> >>> >> >> > DISK_TYPE : FILE
>> >> >>> >> >> >
>> >> >>> >> >> > DATASTORE CAPACITY
>> >> >>> >> >> > TOTAL: : -
>> >> >>> >> >> > USED: : -
>> >> >>> >> >> > FREE: : -
>> >> >>> >> >> >
>> >> >>> >> >> > PERMISSIONS
>> >> >>> >> >> > OWNER : um-
>> >> >>> >> >> > GROUP : u--
>> >> >>> >> >> > OTHER : ---
>> >> >>> >> >> >
>> >> >>> >> >> > DATASTORE TEMPLATE
>> >> >>> >> >> > BRIDGE_LIST="192.168.147.131"
>> >> >>> >> >> > TM_MAD="vmfs"
>> >> >>> >> >> > TYPE="SYSTEM_DS"
>> >> >>> >> >> >
>> >> >>> >> >> > IMAGES
>> >> >>> >> >> >
>> >> >>> >> >> > 2. For datastore image
>> >> >>> >> >> >
>> >> >>> >> >> > oneadmin at ubuntuOpNeb:~$ onedatastore show 103
>> >> >>> >> >> > DATASTORE 103 INFORMATION
>> >> >>> >> >> > ID : 103
>> >> >>> >> >> > NAME : ssh_diEsxi
>> >> >>> >> >> > USER : oneadmin
>> >> >>> >> >> > GROUP : oneadmin
>> >> >>> >> >> > CLUSTER : Esxiclus
>> >> >>> >> >> > TYPE : IMAGE
>> >> >>> >> >> > DS_MAD : vmfs
>> >> >>> >> >> > TM_MAD : vmfs
>> >> >>> >> >> > BASE PATH : /vmfs/volumes/103
>> >> >>> >> >> > DISK_TYPE : FILE
>> >> >>> >> >> >
>> >> >>> >> >> > DATASTORE CAPACITY
>> >> >>> >> >> > TOTAL: : 0M
>> >> >>> >> >> > USED: : 0M
>> >> >>> >> >> > FREE: : 0M
>> >> >>> >> >> >
>> >> >>> >> >> > PERMISSIONS
>> >> >>> >> >> > OWNER : um-
>> >> >>> >> >> > GROUP : u--
>> >> >>> >> >> > OTHER : ---
>> >> >>> >> >> >
>> >> >>> >> >> > DATASTORE TEMPLATE
>> >> >>> >> >> > BRIDGE_LIST="192.168.147.131"
>> >> >>> >> >> > DS_MAD="vmfs"
>> >> >>> >> >> > TM_MAD="vmfs"
>> >> >>> >> >> > TYPE="IMAGE_DS"
>> >> >>> >> >> >
>> >> >>> >> >> > IMAGES
>> >> >>> >> >> >
>> >> >>> >> >> > 3. In oned.log file show:
>> >> >>> >> >> >
>> >> >>> >> >> > Mon Nov 11 09:46:38 2013 [ImM][I]: Command execution fail:
>> >> >>> >> >> > /var/lib/one/remotes/
>> >> >>> >> >> > datastore/vmfs/monitor
>> >> >>> >> >> > PERTX0RSSVZFUl9BQ1RJT05fREFUQT48REFUQVNUT1JFPjxJRD4xMDM8L
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> > 0lEPjxVSUQ+MDwvVUlEPjxHSUQ+MDwvR0lEPjxVTkFNRT5vbmVhZG1pbjwvVU5BTUU+PEdOQU1FPm9uZ
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> > WFkbWluPC9HTkFNRT48TkFNRT5zc2hfZGlFc3hpPC9OQU1FPjxQRVJNSVNTSU9OUz48T1dORVJfVT4xP
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> > C9PV05FUl9VPjxPV05FUl9NPjE8L09XTkVSX00+PE9XTkVSX0E+MDwvT1dORVJfQT48R1JPVVBfVT4xP
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> > C9HUk9VUF9VPjxHUk9VUF9NPjA8L0dST1VQX00+PEdST1VQX0E+MDwvR1JPVVBfQT48T1RIRVJfVT4wP
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> > C9PVEhFUl9VPjxPVEhFUl9NPjA8L09USEVSX00+PE9USEVSX0E+MDwvT1RIRVJfQT48L1BFUk1JU1NJT
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> > 05TPjxEU19NQUQ+dm1mczwvRFNfTUFEPjxUTV9NQUQ+dm1mczwvVE1fTUFEPjxCQVNFX1BBVEg+L3ZtZ
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> > nMvdm9sdW1lcy8xMDM8L0JBU0VfUEFUSD48VFlQRT4wPC9UWVBFPjxESVNLX1RZUEU+MDwvRElTS19UW
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> > VBFPjxDTFVTVEVSX0lEPjEwMDwvQ0xVU1RFUl9JRD48Q0xVU1RFUj5Fc3hpY2x1czwvQ0xVU1RFUj48V
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> > E9UQUxfTUI+MDwvVE9UQUxfTUI+PEZSRUVfTUI+MDwvRlJFRV9NQj48VVNFRF9NQj4wPC9VU0VEX01CP
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> > jxJTUFHRVM+PC9JTUFHRVM+PFRFTVBMQVRFPjxCUklER0VfTElTVD48IVtDREFUQVsxOTIuMTY4LjE0N
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> > y4xMzFdXT48L0JSSURHRV9MSVNUPjxEU19NQUQ+PCFbQ0RBVEFbdm1mc11dPjwvRFNfTUFEPjxUTV9NQ
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> > UQ+PCFbQ0RBVEFbdm1mc11dPjwvVE1fTUFEPjxUWVBFPjwhW0NEQVRBW0lNQUdFX0RTXV0+PC9UWVBFP
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> > jwvVEVNUExBVEU+PC9EQVRBU1RPUkU+PC9EU19EUklWRVJfQUNUSU9OX0RBVEE+
>> >> >>> >> >> > 103
>> >> >>> >> >> > Mon Nov 11 09:46:38 2013 [ImM][I]: ExitCode: 255
>> >> >>> >> >> > Mon Nov 11 09:46:38 2013 [ImM][E]: Error monitoring
>> >> >>> >> >> > datastore
>> >> >>> >> >> > 103:
>> >> >>> >> >> > -
>> >> >>> >> >> >
>> >> >>> >> >> > 4. Sending oned.log file attachment, inside this check
>> >> >>> >> >> > nodes
>> >> >>> >> >> > monitoring
>> >> >>> >> >> > errors is because I have only Esxi node running at this
>> >> >>> >> >> > tame
>> >> >>> >> >> > others
>> >> >>> >> >> > nodes
>> >> >>> >> >> > are turned off.
>> >> >>> >> >> >
>> >> >>> >> >> > Regards, Caty.
>> >> >>> >> >> >
>> >> >>> >> >> > 2013/11/11 <users-request at lists.opennebula.org>
>> >> >>> >> >> >>
>> >> >>> >> >> >> Send Users mailing list submissions to
>> >> >>> >> >> >> users at lists.opennebula.org
>> >> >>> >> >> >>
>> >> >>> >> >> >> To subscribe or unsubscribe via the World Wide Web, visit
>> >> >>> >> >> >>
>> >> >>> >> >> >>
>> >> >>> >> >> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >> >>> >> >> >> or, via email, send a message with subject or body 'help'
>> >> >>> >> >> >> to
>> >> >>> >> >> >> users-request at lists.opennebula.org
>> >> >>> >> >> >>
>> >> >>> >> >> >> You can reach the person managing the list at
>> >> >>> >> >> >> users-owner at lists.opennebula.org
>> >> >>> >> >> >>
>> >> >>> >> >> >> When replying, please edit your Subject line so it is more
>> >> >>> >> >> >> specific
>> >> >>> >> >> >> than "Re: Contents of Users digest..."
>> >> >>> >> >> >>
>> >> >>> >> >> >>
>> >> >>> >> >> >> Today's Topics:
>> >> >>> >> >> >>
>> >> >>> >> >> >> 1. Re: VM in Opennebula for Esxi 5.1 failed (Tino
>> >> >>> >> >> >> Vazquez)
>> >> >>> >> >> >> 2. Re: VM in Opennebula for Esxi 5.1 failed (Tino
>> >> >>> >> >> >> Vazquez)
>> >> >>> >> >> >> 3. Re: Problem with oZones. Error 401 while trying to
>> >> >>> >> >> >> access a
>> >> >>> >> >> >> zone (Tino Vazquez)
>> >> >>> >> >> >>
>> >> >>> >> >> >>
>> >> >>> >> >> >>
>> >> >>> >> >> >>
>> >> >>> >> >> >>
>> >> >>> >> >> >>
>> >> >>> >> >> >> ----------------------------------------------------------------------
>> >> >>> >> >> >>
>> >> >>> >> >> >> Message: 1
>> >> >>> >> >> >> Date: Mon, 11 Nov 2013 11:23:35 +0100
>> >> >>> >> >> >> From: Tino Vazquez <cvazquez at c12g.com>
>> >> >>> >> >> >> To: Catalina Quinde <catalinaquinde at gmail.com>
>> >> >>> >> >> >> Cc: users <users at lists.opennebula.org>
>> >> >>> >> >> >> Subject: Re: [one-users] VM in Opennebula for Esxi 5.1
>> >> >>> >> >> >> failed
>> >> >>> >> >> >> Message-ID:
>> >> >>> >> >> >>
>> >> >>> >> >> >>
>> >> >>> >> >> >>
>> >> >>> >> >> >>
>> >> >>> >> >> >> <CAHfKwc0uhtMvDkkd0bDvVoDMAeXhC8x+7MMd0apE9Ow+47t4Zg at mail.gmail.com>
>> >> >>> >> >> >> Content-Type: text/plain; charset=windows-1252
>> >> >>> >> >> >>
>> >> >>> >> >> >> Hi Catalina,
>> >> >>> >> >> >>
>> >> >>> >> >> >> Let's focus first on the 'vmfs' datastore not being
>> >> >>> >> >> >> correctly
>> >> >>> >> >> >> monitored. Could you send us the output of "onedatastore
>> >> >>> >> >> >> show
>> >> >>> >> >> >> <ds_id>"
>> >> >>> >> >> >> for both the system and the images datastore.
>> >> >>> >> >> >>
>> >> >>> >> >> >> Also, is there any monitor errors in
>> >> >>> >> >> >> /var/log/one/oned.log?
>> >> >>> >> >> >> If
>> >> >>> >> >> >> cannot
>> >> >>> >> >> >> find the relevant section in the log file, please send it
>> >> >>> >> >> >> through
>> >> >>> >> >> >> for
>> >> >>> >> >> >> analysis.
>> >> >>> >> >> >>
>> >> >>> >> >> >> Best regards,
>> >> >>> >> >> >>
>> >> >>> >> >> >>
>> >> >>> >> >> >> -Tino
>> >> >>> >> >> >>
>> >> >>> >> >> >> --
>> >> >>> >> >> >> OpenNebula - Flexible Enterprise Cloud Made Simple
>> >> >>> >> >> >>
>> >> >>> >> >> >> --
>> >> >>> >> >> >> Constantino V?zquez Blanco, PhD, MSc
>> >> >>> >> >> >>
>> >> >>> >> >> >> Senior Infrastructure Architect at C12G Labs
>> >> >>> >> >> >> www.c12g.com | @C12G | es.linkedin.com/in/tinova
>> >> >>> >> >> >>
>> >> >>> >> >> >> --
>> >> >>> >> >> >> Confidentiality Warning: The information contained in this
>> >> >>> >> >> >> e-mail
>> >> >>> >> >> >> and
>> >> >>> >> >> >> any accompanying documents, unless otherwise expressly
>> >> >>> >> >> >> indicated,
>> >> >>> >> >> >> is
>> >> >>> >> >> >> confidential and privileged, and is intended solely for
>> >> >>> >> >> >> the
>> >> >>> >> >> >> person
>> >> >>> >> >> >> and/or entity to whom it is addressed (i.e. those
>> >> >>> >> >> >> identified
>> >> >>> >> >> >> in
>> >> >>> >> >> >> the
>> >> >>> >> >> >> "To" and "cc" box). They are the property of C12G Labs
>> >> >>> >> >> >> S.L..
>> >> >>> >> >> >> Unauthorized distribution, review, use, disclosure, or
>> >> >>> >> >> >> copying of
>> >> >>> >> >> >> this
>> >> >>> >> >> >> communication, or any part thereof, is strictly prohibited
>> >> >>> >> >> >> and
>> >> >>> >> >> >> may
>> >> >>> >> >> >> be
>> >> >>> >> >> >> unlawful. If you have received this e-mail in error,
>> >> >>> >> >> >> please
>> >> >>> >> >> >> notify
>> >> >>> >> >> >> us
>> >> >>> >> >> >> immediately by e-mail at abuse at c12g.com and delete the
>> >> >>> >> >> >> e-mail
>> >> >>> >> >> >> and
>> >> >>> >> >> >> attachments and any copy from your system. C12G thanks you
>> >> >>> >> >> >> for
>> >> >>> >> >> >> your
>> >> >>> >> >> >> cooperation.
>> >> >>> >> >> >>
>> >> >>> >> >> >>
>> >> >>> >> >> >> On Mon, Nov 11, 2013 at 2:17 AM, Catalina Quinde
>> >> >>> >> >> >> <catalinaquinde at gmail.com> wrote:
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > Hi Daniel,
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > Thanks for reply,
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > 1. 1. I'm using Opennebula 4.2 and node Esxi
>> >> >>> >> >> >> > version
>> >> >>> >> >> >> > 5.1.
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > 2. I 2. I have used the following links:
>> >> >>> >> >> >> > http://opennebula.org/documentation:rel4.2:cluster_guide
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > http://opennebula.org/documentation:rel4.2:vmware_ds
>> >> >>> >> >> >> >
>> >> >>> >> >> >> >
>> >> >>> >> >> >> >
>> >> >>> >> >> >> >
>> >> >>> >> >> >> >
>> >> >>> >> >> >> >
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > http://opennebula.org/documentation:rel4.2:system_ds#the_system_datastore_for_multi-cluster_setups
>> >> >>> >> >> >> > and responses in mail lists.
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > 33. I 3. I have enabled ssh between Opennebula and
>> >> >>> >> >> >> > Esxi
>> >> >>> >> >> >> > to
>> >> >>> >> >> >> > use
>> >> >>> >> >> >> > no
>> >> >>> >> >> >> > password
>> >> >>> >> >> >> > correctly.
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > 4. 4. According to documentation should I put the
>> >> >>> >> >> >> > Esxi
>> >> >>> >> >> >> > node
>> >> >>> >> >> >> > inside
>> >> >>> >> >> >> > the
>> >> >>> >> >> >> > cluster, as Opennebula is working with several
>> >> >>> >> >> >> > hypervisors,
>> >> >>> >> >> >> > has
>> >> >>> >> >> >> > been
>> >> >>> >> >> >> > used
>> >> >>> >> >> >> > the command to create the cluster: ?onecluster create
>> >> >>> >> >> >> > [namecluster]?.
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > 5. 5. I added the node Esxi to this cluster with
>> >> >>> >> >> >> > the
>> >> >>> >> >> >> > command:
>> >> >>> >> >> >> > ?onecluster addhost [namecluster] [namenodo]?.
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > 6. 6. I added to the cluster, virtual network
>> >> >>> >> >> >> > created
>> >> >>> >> >> >> > for
>> >> >>> >> >> >> > Esxi,
>> >> >>> >> >> >> > which
>> >> >>> >> >> >> > is also created on the Esxi node through Vsphere Client,
>> >> >>> >> >> >> > with
>> >> >>> >> >> >> > the
>> >> >>> >> >> >> > command:?onecluster addvnet [namecluster]
>> >> >>> >> >> >> > [namevirtualred]?
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > 7. 7. I updated the cluster using the command:
>> >> >>> >> >> >> > ?onecluster
>> >> >>> >> >> >> > update
>> >> >>> >> >> >> > [namecluster]?, to add: DATASTORE_LOCATION, which will
>> >> >>> >> >> >> > affect
>> >> >>> >> >> >> > only
>> >> >>> >> >> >> > that
>> >> >>> >> >> >> > node, by placing the following:
>> >> >>> >> >> >> > DATASTORE_LOCATION=/vmfs/volumes
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > 8. 8. I have created two files that serve as image
>> >> >>> >> >> >> > to
>> >> >>> >> >> >> > create
>> >> >>> >> >> >> > the
>> >> >>> >> >> >> > datastores:
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > a. The image file for the datastore system
>> >> >>> >> >> >> > contains:
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > NAME=dsEsxi
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > TM_MAD=vmfs
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > TYPE=SYSTEM_DS
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > BRIDGE_LIST="192.168.147.131"
>> >> >>> >> >> >> >
>> >> >>> >> >> >> >
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > b. This datastore is linked to the cluster at the
>> >> >>> >> >> >> > same
>> >> >>> >> >> >> > time
>> >> >>> >> >> >> > created
>> >> >>> >> >> >> > with the command: ?onedatastore create -c [namecluster]
>> >> >>> >> >> >> > /var/lib/images/system_esxi.ds?.
>> >> >>> >> >> >> >
>> >> >>> >> >> >> >
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > c. The image file for the datastore image
>> >> >>> >> >> >> > contains:
>> >> >>> >> >> >> >
>> >> >>> >> >> >> >
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > NAME=diEsxi
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > DS_MAD=vmfs
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > TM_MAD=vmfs
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > TYPE=IMAGE_DS
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > BRIDGE_LIST="192.168.147.131"
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > d. This datastore is linked to the cluster at the
>> >> >>> >> >> >> > same
>> >> >>> >> >> >> > time
>> >> >>> >> >> >> > created
>> >> >>> >> >> >> > with the commando:
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > ?onedatastore create ?c [namecluster]
>> >> >>> >> >> >> > /var/lib/images/image_esxi.ds?
>> >> >>> >> >> >> >
>> >> >>> >> >> >> >
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > 9. 9. When I list the datastores, you can see that
>> >> >>> >> >> >> > the
>> >> >>> >> >> >> > image
>> >> >>> >> >> >> > datastore
>> >> >>> >> >> >> > new created has 0M capacity.
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > I've done all this procedure since according to the
>> >> >>> >> >> >> > documentation
>> >> >>> >> >> >> > followed
>> >> >>> >> >> >> > at Opennebula 4.2, it changes how to use Esxi node.
>> >> >>> >> >> >> >
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > Before all of the above to deploy a VM this error
>> >> >>> >> >> >> > occurred:
>> >> >>> >> >> >>
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > oneadmin at ubuntuOpNeb:~$ cat /var/log/one/36.log
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > Thu Oct 31 11:18:02 2013 [DiM][I]: New VM state is
>> >> >>> >> >> >> > ACTIVE.
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > Thu Oct 31 11:18:02 2013 [LCM][I]: New VM state is
>> >> >>> >> >> >> > PROLOG.
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > Thu Oct 31 11:18:03 2013 [TM][I]: Command execution
>> >> >>> >> >> >> > fail:
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > /var/lib/one/remotes/tm/shared/clone
>> >> >>> >> >> >> > ubuntuOpNeb:/var/lib/one/datastores/1/
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > 02e8c67d4f59826e9fb12ccb48f77557
>> >> >>> >> >> >> > demos:/var/lib/one/datastores/0/36/disk.0
>> >> >>> >> >> >>
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > 36 1
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > Thu Oct 31 11:18:03 2013 [TM][I]: clone: Cloning
>> >> >>> >> >> >> > /var/lib/one/datastores/1/
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > 02e8c67d4f59826e9fb12ccb48f77557 in
>> >> >>> >> >> >> > demos:/var/lib/one/datastores/
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > 0/36/disk.0
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > Thu Oct 31 11:18:03 2013 [TM][E]: clone: Command "cd
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > /var/lib/one/datastores/0/36; cp
>> >> >>> >> >> >> > /var/lib/one/datastores/1/
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > 02e8c67d4f59826e9fb12ccb48f77557
>> >> >>> >> >> >> > /var/lib/one/datastores/0/36/disk.0"
>> >> >>> >> >> >>
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > failed: cp: can't stat '/var/lib/one/datastores/1/
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > 02e8c67d4f59826e9fb12ccb48f77557': No such file or
>> >> >>> >> >> >> > directory
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > Thu Oct 31 11:18:03 2013 [TM][E]: Error copying
>> >> >>> >> >> >> > ubuntuOpNeb:/var/lib/one/
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > datastores/1/02e8c67d4f59826e9fb12ccb48f77557 to
>> >> >>> >> >> >>
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > demos:/var/lib/one/datastores/0/36/disk.0
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > Thu Oct 31 11:18:03 2013 [TM][I]: ExitCode: 1
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > Thu Oct 31 11:18:03 2013 [TM][E]: Error executing image
>> >> >>> >> >> >> > transfer
>> >> >>> >> >> >> > script:
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > Error copying ubuntuOpNeb:/var/lib/one/datastores/1/
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > 02e8c67d4f59826e9fb12ccb48f77557 to
>> >> >>> >> >> >> > demos:/var/lib/one/datastores/
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > 0/36/disk.0
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > Thu Oct 31 11:18:03 2013 [DiM][I]: New VM state is
>> >> >>> >> >> >> > FAILED
>> >> >>> >> >> >> >
>> >> >>> >> >> >> >
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > Now, I suppose that I've to create the image for
>> >> >>> >> >> >> > opennebula
>> >> >>> >> >> >> > in
>> >> >>> >> >> >> > the
>> >> >>> >> >> >> > new
>> >> >>> >> >> >> > image
>> >> >>> >> >> >> > datastore but I can?t do because it has no capacity.
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > Please help me.
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > Thanks, Caty
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > 2013/11/10 <users-request at lists.opennebula.org>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> Send Users mailing list submissions to
>> >> >>> >> >> >> >> users at lists.opennebula.org
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> To subscribe or unsubscribe via the World Wide Web,
>> >> >>> >> >> >> >> visit
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >> >>> >> >> >> >> or, via email, send a message with subject or body
>> >> >>> >> >> >> >> 'help'
>> >> >>> >> >> >> >> to
>> >> >>> >> >> >> >> users-request at lists.opennebula.org
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> You can reach the person managing the list at
>> >> >>> >> >> >> >> users-owner at lists.opennebula.org
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> When replying, please edit your Subject line so it is
>> >> >>> >> >> >> >> more
>> >> >>> >> >> >> >> specific
>> >> >>> >> >> >> >> than "Re: Contents of Users digest..."
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> Today's Topics:
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> 1. VM in Opennebula for Esxi 5.1 failed (Catalina
>> >> >>> >> >> >> >> Quinde)
>> >> >>> >> >> >> >> 2. Re: VM in Opennebula for Esxi 5.1 failed (Daniel
>> >> >>> >> >> >> >> Dehennin)
>> >> >>> >> >> >> >> 3. ask to password when add ceph datastore
>> >> >>> >> >> >> >> (12navidb2 at gmail.com)
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> ----------------------------------------------------------------------
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> Message: 1
>> >> >>> >> >> >> >> Date: Sat, 9 Nov 2013 19:07:44 -0500
>> >> >>> >> >> >> >> From: Catalina Quinde <catalinaquinde at gmail.com>
>> >> >>> >> >> >> >> To: users at lists.opennebula.org
>> >> >>> >> >> >> >> Subject: [one-users] VM in Opennebula for Esxi 5.1
>> >> >>> >> >> >> >> failed
>> >> >>> >> >> >> >> Message-ID:
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> <CAPgz++yOE=CmekTkFjD=yCFo4uwN6oMYb+z+aYY7VtZ4rOoubw at mail.gmail.com>
>> >> >>> >> >> >> >> Content-Type: text/plain; charset="iso-8859-1"
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> Please help me,I created an OpenNebula cluster in which
>> >> >>> >> >> >> >> I
>> >> >>> >> >> >> >> have
>> >> >>> >> >> >> >> added
>> >> >>> >> >> >> >> the
>> >> >>> >> >> >> >> host Esxi, I've also created two datastores, one for
>> >> >>> >> >> >> >> system
>> >> >>> >> >> >> >> and
>> >> >>> >> >> >> >> one
>> >> >>> >> >> >> >> for
>> >> >>> >> >> >> >> images, with features:
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> ID 100 system TM_MAD = vmfs
>> >> >>> >> >> >> >> ID 101 image DS_MAD = vmfs
>> >> >>> >> >> >> >> TM_MAD = vmfs
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> These two datastores I have added to the cluster
>> >> >>> >> >> >> >> created,
>> >> >>> >> >> >> >> the
>> >> >>> >> >> >> >> comand
>> >> >>> >> >> >> >> "onedatastore list" indicates CAPACITY datastore = 0M
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> And in the path "/ var / lib / one / datastores" here
>> >> >>> >> >> >> >> are
>> >> >>> >> >> >> >> not
>> >> >>> >> >> >> >> these
>> >> >>> >> >> >> >> two
>> >> >>> >> >> >> >> datastores as directories.
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> I'm using OpenNebula Esxi 4.2 and 5.1.
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> Greetings.
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> Caty.
>> >> >>> >> >> >> >> -------------- next part --------------
>> >> >>> >> >> >> >> An HTML attachment was scrubbed...
>> >> >>> >> >> >> >> URL:
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20131109/556b453a/attachment.html>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> ------------------------------
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> Message: 2
>> >> >>> >> >> >> >> Date: Sun, 10 Nov 2013 01:47:35 +0100
>> >> >>> >> >> >> >> From: Daniel Dehennin <daniel.dehennin at baby-gnu.org>
>> >> >>> >> >> >> >> To: users at lists.opennebula.org
>> >> >>> >> >> >> >> Subject: Re: [one-users] VM in Opennebula for Esxi 5.1
>> >> >>> >> >> >> >> failed
>> >> >>> >> >> >> >> Message-ID: <878uwx9j6g.fsf at hati.baby-gnu.org>
>> >> >>> >> >> >> >> Content-Type: text/plain; charset="utf-8"
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> Catalina Quinde <catalinaquinde at gmail.com> writes:
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> First of all hello,
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> I do not have proprietary system so I'll only give you
>> >> >>> >> >> >> >> information I
>> >> >>> >> >> >> >> have.
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> > Please help me,I created an OpenNebula cluster in
>> >> >>> >> >> >> >> > which
>> >> >>> >> >> >> >> > I
>> >> >>> >> >> >> >> > have
>> >> >>> >> >> >> >> > added
>> >> >>> >> >> >> >> > the
>> >> >>> >> >> >> >> > host Esxi, I've also created two datastores, one for
>> >> >>> >> >> >> >> > system
>> >> >>> >> >> >> >> > and
>> >> >>> >> >> >> >> > one
>> >> >>> >> >> >> >> > for
>> >> >>> >> >> >> >> > images, with features:
>> >> >>> >> >> >> >> >
>> >> >>> >> >> >> >> > ID 100 system TM_MAD = vmfs
>> >> >>> >> >> >> >> > ID 101 image DS_MAD = vmfs
>> >> >>> >> >> >> >> > TM_MAD = vmfs
>> >> >>> >> >> >> >> >
>> >> >>> >> >> >> >> > These two datastores I have added to the cluster
>> >> >>> >> >> >> >> > created,
>> >> >>> >> >> >> >> > the
>> >> >>> >> >> >> >> > comand
>> >> >>> >> >> >> >> > "onedatastore list" indicates CAPACITY datastore = 0M
>> >> >>> >> >> >> >> >
>> >> >>> >> >> >> >> > And in the path "/ var / lib / one / datastores" here
>> >> >>> >> >> >> >> > are
>> >> >>> >> >> >> >> > not
>> >> >>> >> >> >> >> > these
>> >> >>> >> >> >> >> > two
>> >> >>> >> >> >> >> > datastores as directories.
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> Reading the documentation[1], I understand that:
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> 1. oneadmin must be able to SSH ESX servers without
>> >> >>> >> >> >> >> password[2]
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> 2. nothing is under /var/lib/one/datastores of the
>> >> >>> >> >> >> >> OpenNebula
>> >> >>> >> >> >> >> frontend
>> >> >>> >> >> >> >> because it's managed by ESX servers, ONE access to
>> >> >>> >> >> >> >> VMFS
>> >> >>> >> >> >> >> datastores
>> >> >>> >> >> >> >> though API
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> Maybe if you describe a little more your setup will
>> >> >>> >> >> >> >> help
>> >> >>> >> >> >> >> people
>> >> >>> >> >> >> >> helping
>> >> >>> >> >> >> >> you ;-)
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> > I'm using OpenNebula Esxi 4.2 and 5.1.
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> I suppose you mean that you use:
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> - OpenNebula 4.2
>> >> >>> >> >> >> >> - ESXi 5.1
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> Right?
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> Regards.
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> Footnotes:
>> >> >>> >> >> >> >> [1]
>> >> >>> >> >> >> >> http://opennebula.org/documentation:rel4.2:vmware_ds
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> [2]
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> http://opennebula.org/documentation:rel4.2:hostsubsystem
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> --
>> >> >>> >> >> >> >> Daniel Dehennin
>> >> >>> >> >> >> >> R?cup?rer ma clef GPG:
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> gpg --keyserver pgp.mit.edu --recv-keys 0x7A6FE2DF
>> >> >>> >> >> >> >> -------------- next part --------------
>> >> >>> >> >> >> >> A non-text attachment was scrubbed...
>> >> >>> >> >> >> >> Name: not available
>> >> >>> >> >> >> >> Type: application/pgp-signature
>> >> >>> >> >> >> >> Size: 229 bytes
>> >> >>> >> >> >> >> Desc: not available
>> >> >>> >> >> >> >> URL:
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20131110/580e83eb/attachment-0001.pgp>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> ------------------------------
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> Message: 3
>> >> >>> >> >> >> >> Date: Sun, 10 Nov 2013 13:26:27 +0330
>> >> >>> >> >> >> >> From: "12navidb2 at gmail.com" <12navidb2 at gmail.com>
>> >> >>> >> >> >> >> To: users at lists.opennebula.org
>> >> >>> >> >> >> >> Subject: [one-users] ask to password when add ceph
>> >> >>> >> >> >> >> datastore
>> >> >>> >> >> >> >> Message-ID:
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> <CAK9QDg9znnHjkH=mLc19F=CTSd+Yo16arttCEg_erv5-x4WAtg at mail.gmail.com>
>> >> >>> >> >> >> >> Content-Type: text/plain; charset="iso-8859-1"
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> hi all
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> when i add new ceph datastore, opennebula run a command
>> >> >>> >> >> >> >> like
>> >> >>> >> >> >> >> this
>> >> >>> >> >> >> >> with
>> >> >>> >> >> >> >> oneadmin user that needs password
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> oneadmin at one-server2:~$
>> >> >>> >> >> >> >> /var/lib/one/remotes/datastore/ceph/monitor
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> PERTX0RSSVZFUl9BQ1RJT05fREFUQT48REFUQVNUT1JFPjxJRD4xMTM8L0lEPjxVSUQ+MDwvVUlEPjxHSUQ+MDwvR0lEPjxVTkFNRT5vbmVhZG1pbjwvVU5BTUU+PEdOQU1FPm9uZWFkbWluPC9HTkFNRT48TkFNRT5jZXBoZHM8L05BTUU+PFBFUk1JU1NJT05TPjxPV05FUl9VPjE8L09XTkVSX1U+PE9XTkVSX00+MTwvT1dORVJfTT48T1dORVJfQT4wPC9PV05FUl9BPjxHUk9VUF9VPjE8L0dST1VQX1U+PEdST1VQX00+MDwvR1JPVVBfTT48R1JPVVBfQT4wPC9HUk9VUF9BPjxPVEhFUl9VPjA8L09USEVSX1U+PE9USEVSX00+MDwvT1RIRVJfTT48T1RIRVJfQT4wPC9PVEhFUl9BPjwvUEVSTUlTU0lPTlM+PERTX01BRD5jZXBoPC9EU19NQUQ+PFRNX01BRD5jZXBoPC9UTV9NQUQ+PEJBU0VfUEFUSD4vdmFyL2xpYi9vbmUvZGF0YXN0b3Jlcy8xMTM8L0JBU0VfUEFUSD48VFlQRT4wPC9UWVBFPjxESVNLX1RZUEU+MzwvRElTS19UWVBFPjxDTFVTVEVSX0lEPi0xPC9DTFVTVEVSX0lEPjxDTFVTVEVSPjwvQ0xVU1RFUj48VE9UQUxfTUI+MDwvVE9UQUxfTUI+PEZSRUVfTUI+MDwvRlJFRV9NQj48VVNFRF9NQj4wPC9VU0VEX01CPjxJTUFHRVM+PC9JTUFHRVM+PFRFTVBMQVRFPjxEU19NQUQ+PCFbQ0RBVEFbY2VwaF1dPjwvRFNfTUFEPjxIT1NUPjwhW0NEQVRBW29uZS1zZXJ2ZXIyXV0+PC9IT1NUPjxQT09MX05BTUU+PCFbQ0RBVEFbcmJkXV0+PC9QT09MX05BTUU+PFNBRkVfRElSUz48IVt
>> DRE
>> >> FUQV
>> >> >>> svX
>> >> >>> >> V0+PC9
>> >> >>> >> >> >> TQU
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> ZFX0RJUlM+PFRNX01BRD48IVtDREFUQVtjZXBoXV0+PC9UTV9NQUQ+PC9URU1QTEFURT48L0RBVEFTVE9SRT48L0RTX0RSSVZFUl9BQ1RJT05fREFUQT4=
>> >> >>> >> >> >> >> 113
>> >> >>> >> >> >> >> oneadmin at one-server2's password:
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> because it, opennebula cant show datastore space and
>> >> >>> >> >> >> >> show
>> >> >>> >> >> >> >> (0MB)
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> output this command is
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> USED_MB=3015
>> >> >>> >> >> >> >> FREE_MB=1184747
>> >> >>> >> >> >> >> TOTAL_MB=1193984
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> the point here is that i cant run this command with
>> >> >>> >> >> >> >> oneadmin
>> >> >>> >> >> >> >> user
>> >> >>> >> >> >> >> !
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> sudo rados df
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> or even rados df (without sudo)
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> i add these lines to /etc/sudoers
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> oneadmin ALL=(ALL) NOPASSWD:
>> >> >>> >> >> >> >> /usr/bin/rbd*,/usr/bin/rados*
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> best regards
>> >> >>> >> >> >> >> -------------- next part --------------
>> >> >>> >> >> >> >> An HTML attachment was scrubbed...
>> >> >>> >> >> >> >> URL:
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20131110/64242fd6/attachment-0001.htm>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> ------------------------------
>> >> >>> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> _______________________________________________
>> >> >>> >> >> >> >> Users mailing list
>> >> >>> >> >> >> >> Users at lists.opennebula.org
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> End of Users Digest, Vol 69, Issue 26
>> >> >>> >> >> >> >> *************************************
>> >> >>> >> >> >>
>> >> >>> >> >> >> >
>> >> >>> >> >> >> >
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > _______________________________________________
>> >> >>> >> >> >> > Users mailing list
>> >> >>> >> >> >> > Users at lists.opennebula.org
>> >> >>> >> >> >> >
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >> >>> >> >> >> >
>> >> >>> >> >> >>
>> >> >>> >> >> >>
>> >> >>> >> >> >> ------------------------------
>> >> >>> >> >> >>
>> >> >>> >> >> >> Message: 2
>> >> >>> >> >> >> Date: Mon, 11 Nov 2013 14:30:20 +0100
>> >> >>> >> >> >> From: Tino Vazquez <cvazquez at c12g.com>
>> >> >>> >> >> >> To: Catalina Quinde <catalinaquinde at gmail.com>
>> >> >>> >> >> >> Cc: users <users at lists.opennebula.org>
>> >> >>> >> >> >> Subject: Re: [one-users] VM in Opennebula for Esxi 5.1
>> >> >>> >> >> >> failed
>> >> >>> >> >> >> Message-ID:
>> >> >>> >> >> >>
>> >> >>> >> >> >>
>> >> >>> >> >> >>
>> >> >>> >> >> >>
>> >> >>> >> >> >> <CAHfKwc05HTwsGJSxkW4fSoMu5O10=HuAUcS70pVCzh2d3zgxtA at mail.gmail.com>
>> >> >>> >> >> >> Content-Type: text/plain; charset=ISO-8859-1
>> >> >>> >> >> >>
>> >> >>> >> >> >>
>> >> >>> >> >> >> On Thu, Nov 7, 2013 at 5:55 AM, Catalina Quinde
>> >> >>> >> >> >> <catalinaquinde at gmail.com> wrote:
>> >> >>> >> >> >> > Thanks Tino,
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > Excuse me for not responding earlier, I have read the
>> >> >>> >> >> >> > documentation
>> >> >>> >> >> >> > provided
>> >> >>> >> >> >> > I do, but there is a section that is not clear in which
>> >> >>> >> >> >> > states
>> >> >>> >> >> >> > the
>> >> >>> >> >> >> > following:
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > "... In heterogeneous clouds (mix of ESX and other
>> >> >>> >> >> >> > hypervisor
>> >> >>> >> >> >> > hosts)
>> >> >>> >> >> >> > put
>> >> >>> >> >> >> > all
>> >> >>> >> >> >> > the ESX hosts in clusters With The Following In Their
>> >> >>> >> >> >> > template
>> >> >>> >> >> >> > attribute
>> >> >>> >> >> >> > (eg
>> >> >>> >> >> >> > onecluster update) ...":
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > DATASTORE_LOCATION = / vmfs / volumes
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > In my case, opennebula works with 4 different
>> >> >>> >> >> >> > hypervisors,
>> >> >>> >> >> >> > and
>> >> >>> >> >> >> > I
>> >> >>> >> >> >> > don't
>> >> >>> >> >> >> > have
>> >> >>> >> >> >> > created clusters, nodes are registered directly in
>> >> >>> >> >> >> > opennebula:
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > 1. I make clusters for each hypervisor??
>> >> >>> >> >> >>
>> >> >>> >> >> >> You will need to create one at least for VMware in order
>> >> >>> >> >> >> to
>> >> >>> >> >> >> set
>> >> >>> >> >> >> the
>> >> >>> >> >> >> DATASTORE_LOCATION in the cluster so the datastores can
>> >> >>> >> >> >> inherit
>> >> >>> >> >> >> it.
>> >> >>> >> >> >> In
>> >> >>> >> >> >> any case, it would be recommended to have one cluster per
>> >> >>> >> >> >> hypervisor.
>> >> >>> >> >> >>
>> >> >>> >> >> >> > 2. In the image cluster file to create the cluster must
>> >> >>> >> >> >> > point
>> >> >>> >> >> >> > out
>> >> >>> >> >> >> > the
>> >> >>> >> >> >> > DATASTORE_LOCATION????
>> >> >>> >> >> >>
>> >> >>> >> >> >> Yes, the template used to create the cluster must include
>> >> >>> >> >> >> the
>> >> >>> >> >> >> DATASTORE_LOCATION, although this can be updated later. In
>> >> >>> >> >> >> any
>> >> >>> >> >> >> case,
>> >> >>> >> >> >> the DATASTORE_LOCATION _must_ be present before the
>> >> >>> >> >> >> datastore
>> >> >>> >> >> >> is
>> >> >>> >> >> >> created.
>> >> >>> >> >> >>
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > In my case I have created the datastores in "ESXi" with
>> >> >>> >> >> >> > the
>> >> >>> >> >> >> > frontend
>> >> >>> >> >> >> > in
>> >> >>> >> >> >> > "/
>> >> >>> >> >> >> > var/lib/one/datastores/0" and "1", created by the
>> >> >>> >> >> >> > "VMWare
>> >> >>> >> >> >> > Client",
>> >> >>> >> >> >> > in
>> >> >>> >> >> >> > this
>> >> >>> >> >> >> > datastores is created a virtual machine for Esxi. I must
>> >> >>> >> >> >> > add
>> >> >>> >> >> >> > the
>> >> >>> >> >> >> > datastores
>> >> >>> >> >> >> > "/ vmfs / volumes. .. "as additional datastores??
>> >> >>> >> >> >>
>> >> >>> >> >> >> In the ESX, only the system and one image datastore need
>> >> >>> >> >> >> to
>> >> >>> >> >> >> be
>> >> >>> >> >> >> register (and potentially, more than one image datastore).
>> >> >>> >> >> >> In
>> >> >>> >> >> >> OpenNebula 4.2 they cannot be 0 and 1, since they are
>> >> >>> >> >> >> created
>> >> >>> >> >> >> on
>> >> >>> >> >> >> OpneNebula first boot and they won't have the proper
>> >> >>> >> >> >> DATASTORE_LOCATION inherit.
>> >> >>> >> >> >>
>> >> >>> >> >> >> To check that all is good, the BASE_PATH of both the
>> >> >>> >> >> >> system
>> >> >>> >> >> >> and
>> >> >>> >> >> >> image
>> >> >>> >> >> >> datstore for VMware should contain "/vmfs/volumes"
>> >> >>> >> >> >>
>> >> >>> >> >> >> Regards,
>> >> >>> >> >> >>
>> >> >>> >> >> >> -Tino
>> >> >>> >> >> >>
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > Thanks for responding
>> >> >>> >> >> >> > Caty
>> >> >>> >> >> >> >
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > 2013/11/4 Tino Vazquez <cvazquez at c12g.com>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> Hi,
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> Ok, so then you need to create a VMFS datastore in
>> >> >>> >> >> >> >> order
>> >> >>> >> >> >> >> to
>> >> >>> >> >> >> >> register
>> >> >>> >> >> >> >> VMDK images that can be used with VMware ESX. More info
>> >> >>> >> >> >> >> here:
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> http://opennebula.org/documentation:rel4.2:vmware_ds
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> Regards,
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> -Tino
>> >> >>> >> >> >> >> --
>> >> >>> >> >> >> >> OpenNebula - Flexible Enterprise Cloud Made Simple
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> --
>> >> >>> >> >> >> >> Constantino V?zquez Blanco, PhD, MSc
>> >> >>> >> >> >>
>> >> >>> >> >> >> >> Senior Infrastructure Architect at C12G Labs
>> >> >>> >> >> >> >> www.c12g.com | @C12G | es.linkedin.com/in/tinova
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> --
>> >> >>> >> >> >> >> Confidentiality Warning: The information contained in
>> >> >>> >> >> >> >> this
>> >> >>> >> >> >> >> e-mail
>> >> >>> >> >> >> >> and
>> >> >>> >> >> >> >> any accompanying documents, unless otherwise expressly
>> >> >>> >> >> >> >> indicated,
>> >> >>> >> >> >> >> is
>> >> >>> >> >> >> >> confidential and privileged, and is intended solely for
>> >> >>> >> >> >> >> the
>> >> >>> >> >> >> >> person
>> >> >>> >> >> >> >> and/or entity to whom it is addressed (i.e. those
>> >> >>> >> >> >> >> identified
>> >> >>> >> >> >> >> in
>> >> >>> >> >> >> >> the
>> >> >>> >> >> >> >> "To" and "cc" box). They are the property of C12G Labs
>> >> >>> >> >> >> >> S.L..
>> >> >>> >> >> >> >> Unauthorized distribution, review, use, disclosure, or
>> >> >>> >> >> >> >> copying
>> >> >>> >> >> >> >> of
>> >> >>> >> >> >> >> this
>> >> >>> >> >> >> >> communication, or any part thereof, is strictly
>> >> >>> >> >> >> >> prohibited
>> >> >>> >> >> >> >> and
>> >> >>> >> >> >> >> may
>> >> >>> >> >> >> >> be
>> >> >>> >> >> >> >> unlawful. If you have received this e-mail in error,
>> >> >>> >> >> >> >> please
>> >> >>> >> >> >> >> notify
>> >> >>> >> >> >> >> us
>> >> >>> >> >> >> >> immediately by e-mail at abuse at c12g.com and delete the
>> >> >>> >> >> >> >> e-mail
>> >> >>> >> >> >> >> and
>> >> >>> >> >> >> >> attachments and any copy from your system. C12G thanks
>> >> >>> >> >> >> >> you
>> >> >>> >> >> >> >> for
>> >> >>> >> >> >> >> your
>> >> >>> >> >> >> >> cooperation.
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> On Mon, Nov 4, 2013 at 4:04 PM, Catalina Quinde
>> >> >>> >> >> >> >> <catalinaquinde at gmail.com> wrote:
>> >> >>> >> >> >> >> > Hi, Tino thanks for reply,
>> >> >>> >> >> >> >> >
>> >> >>> >> >> >> >> > In Opennebula-sunstone in the bottom, says
>> >> >>> >> >> >> >> > "Opennebula
>> >> >>> >> >> >> >> > 4.2.0
>> >> >>> >> >> >> >> > by
>> >> >>> >> >> >> >> > C12G
>> >> >>> >> >> >> >> > Labs",
>> >> >>> >> >> >> >> > the commands "one -v" or "one -version" not working,
>> >> >>> >> >> >> >> > Is
>> >> >>> >> >> >> >> > this
>> >> >>> >> >> >> >> > version
>> >> >>> >> >> >> >> > for
>> >> >>> >> >> >> >> > opennebula?, I did the installation with command
>> >> >>> >> >> >> >> > "apt-get
>> >> >>> >> >> >> >> > install
>> >> >>> >> >> >> >> > opennebula".
>> >> >>> >> >> >> >> >
>> >> >>> >> >> >> >> > Please, guide me more clearly, because I have the
>> >> >>> >> >> >> >> > others
>> >> >>> >> >> >> >> > hypervisors
>> >> >>> >> >> >> >> > working with opennebula too.
>> >> >>> >> >> >> >> >
>> >> >>> >> >> >> >> > Thanks Tino,
>> >> >>> >> >> >> >> >
>> >> >>> >> >> >> >> > Caty.
>> >> >>> >> >> >> >> >
>> >> >>> >> >> >> >> >
>> >> >>> >> >> >> >> > 2013/11/4 Tino Vazquez <cvazquez at c12g.com>
>> >> >>> >> >> >> >> >>
>> >> >>> >> >> >> >> >> Hi Catalina,
>> >> >>> >> >> >> >> >>
>> >> >>> >> >> >> >> >> Which OpenNebula version are you using? If you are
>> >> >>> >> >> >> >> >> in
>> >> >>> >> >> >> >> >> 4.2,
>> >> >>> >> >> >> >> >> be
>> >> >>> >> >> >> >> >> aware
>> >> >>> >> >> >> >> >> that the only datastore drivers for VMware are the
>> >> >>> >> >> >> >> >> 'vmfs',
>> >> >>> >> >> >> >> >> not
>> >> >>> >> >> >> >> >> 'shared'.
>> >> >>> >> >> >> >> >>
>> >> >>> >> >> >> >> >> Regards,
>> >> >>> >> >> >> >> >>
>> >> >>> >> >> >> >> >> -Tino
>> >> >>> >> >> >> >> >> --
>> >> >>> >> >> >> >> >> OpenNebula - Flexible Enterprise Cloud Made Simple
>> >> >>> >> >> >> >> >>
>> >> >>> >> >> >> >> >> --
>> >> >>> >> >> >> >> >> Constantino V?zquez Blanco, PhD, MSc
>> >> >>> >> >> >>
>> >> >>> >> >> >> >> >> Senior Infrastructure Architect at C12G Labs
>> >> >>> >> >> >> >> >> www.c12g.com | @C12G | es.linkedin.com/in/tinova
>> >> >>> >> >> >> >> >>
>> >> >>> >> >> >> >> >> --
>> >> >>> >> >> >> >> >> Confidentiality Warning: The information contained
>> >> >>> >> >> >> >> >> in
>> >> >>> >> >> >> >> >> this
>> >> >>> >> >> >> >> >> e-mail
>> >> >>> >> >> >> >> >> and
>> >> >>> >> >> >> >> >> any accompanying documents, unless otherwise
>> >> >>> >> >> >> >> >> expressly
>> >> >>> >> >> >> >> >> indicated,
>> >> >>> >> >> >> >> >> is
>> >> >>> >> >> >> >> >> confidential and privileged, and is intended solely
>> >> >>> >> >> >> >> >> for
>> >> >>> >> >> >> >> >> the
>> >> >>> >> >> >> >> >> person
>> >> >>> >> >> >> >> >> and/or entity to whom it is addressed (i.e. those
>> >> >>> >> >> >> >> >> identified
>> >> >>> >> >> >> >> >> in
>> >> >>> >> >> >> >> >> the
>> >> >>> >> >> >> >> >> "To" and "cc" box). They are the property of C12G
>> >> >>> >> >> >> >> >> Labs
>> >> >>> >> >> >> >> >> S.L..
>> >> >>> >> >> >> >> >> Unauthorized distribution, review, use, disclosure,
>> >> >>> >> >> >> >> >> or
>> >> >>> >> >> >> >> >> copying
>> >> >>> >> >> >> >> >> of
>> >> >>> >> >> >> >> >> this
>> >> >>> >> >> >> >> >> communication, or any part thereof, is strictly
>> >> >>> >> >> >> >> >> prohibited
>> >> >>> >> >> >> >> >> and
>> >> >>> >> >> >> >> >> may
>> >> >>> >> >> >> >> >> be
>> >> >>> >> >> >> >> >> unlawful. If you have received this e-mail in error,
>> >> >>> >> >> >> >> >> please
>> >> >>> >> >> >> >> >> notify
>> >> >>> >> >> >> >> >> us
>> >> >>> >> >> >> >> >> immediately by e-mail at abuse at c12g.com and delete
>> >> >>> >> >> >> >> >> the
>> >> >>> >> >> >> >> >> e-mail
>> >> >>> >> >> >> >> >> and
>> >> >>> >> >> >> >> >> attachments and any copy from your system. C12G
>> >> >>> >> >> >> >> >> thanks
>> >> >>> >> >> >> >> >> you
>> >> >>> >> >> >> >> >> for
>> >> >>> >> >> >> >> >> your
>> >> >>> >> >> >> >> >> cooperation.
>> >> >>> >> >> >> >> >>
>> >> >>> >> >> >> >> >>
>> >> >>> >> >> >> >> >> On Mon, Nov 4, 2013 at 5:40 AM, Catalina Quinde
>> >> >>> >> >> >> >> >> <catalinaquinde at gmail.com> wrote:
>> >> >>> >> >> >> >> >> > Hi friends, please help me in this problem
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> > I have opennebula working with nodes kvm, xen,
>> >> >>> >> >> >> >> >> > Esxi
>> >> >>> >> >> >> >> >> > 5.1
>> >> >>> >> >> >> >> >> > and
>> >> >>> >> >> >> >> >> > OpenVZ, I
>> >> >>> >> >> >> >> >> > did VM
>> >> >>> >> >> >> >> >> > in Opennebula for KVM and Xen, VM states RUNN, but
>> >> >>> >> >> >> >> >> > when I
>> >> >>> >> >> >> >> >> > made
>> >> >>> >> >> >> >> >> > a
>> >> >>> >> >> >> >> >> > VM
>> >> >>> >> >> >> >> >> > in
>> >> >>> >> >> >> >> >> > Opennebula for Esxi 5.1, I have this error:
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> > ------------------------------------------------
>> >> >>> >> >> >> >> >> > oneadmin at ubuntuOpNeb:~$ cat /var/log/one/36.log
>> >> >>> >> >> >> >> >> > Thu Oct 31 11:18:02 2013 [DiM][I]: New VM state is
>> >> >>> >> >> >> >> >> > ACTIVE.
>> >> >>> >> >> >> >> >> > Thu Oct 31 11:18:02 2013 [LCM][I]: New VM state is
>> >> >>> >> >> >> >> >> > PROLOG.
>> >> >>> >> >> >> >> >> > Thu Oct 31 11:18:03 2013 [TM][I]: Command
>> >> >>> >> >> >> >> >> > execution
>> >> >>> >> >> >> >> >> > fail:
>> >> >>> >> >> >> >> >> > /var/lib/one/remotes/tm/shared/clone
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> > ubuntuOpNeb:/var/lib/one/datastores/1/02e8c67d4f59826e9fb12ccb48f77557
>> >> >>> >> >> >> >> >> > demos:/var/lib/one/datastores/0/36/disk.0 36 1
>> >> >>> >> >> >> >> >> > Thu Oct 31 11:18:03 2013 [TM][I]: clone: Cloning
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> > /var/lib/one/datastores/1/02e8c67d4f59826e9fb12ccb48f77557
>> >> >>> >> >> >> >> >> > in
>> >> >>> >> >> >> >> >> > demos:/var/lib/one/datastores/0/36/disk.0
>> >> >>> >> >> >> >> >> > Thu Oct 31 11:18:03 2013 [TM][E]: clone: Command
>> >> >>> >> >> >> >> >> > "cd
>> >> >>> >> >> >> >> >> > /var/lib/one/datastores/0/36; cp
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> > /var/lib/one/datastores/1/02e8c67d4f59826e9fb12ccb48f77557
>> >> >>> >> >> >> >> >> > /var/lib/one/datastores/0/36/disk.0" failed: cp:
>> >> >>> >> >> >> >> >> > can't
>> >> >>> >> >> >> >> >> > stat
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> > '/var/lib/one/datastores/1/02e8c67d4f59826e9fb12ccb48f77557':
>> >> >>> >> >> >> >> >> > No
>> >> >>> >> >> >> >> >> > such
>> >> >>> >> >> >> >> >> > file
>> >> >>> >> >> >> >> >> > or directory
>> >> >>> >> >> >> >> >> > Thu Oct 31 11:18:03 2013 [TM][E]: Error copying
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> > ubuntuOpNeb:/var/lib/one/datastores/1/02e8c67d4f59826e9fb12ccb48f77557
>> >> >>> >> >> >> >> >> > to
>> >> >>> >> >> >> >> >> > demos:/var/lib/one/datastores/0/36/disk.0
>> >> >>> >> >> >> >> >> > Thu Oct 31 11:18:03 2013 [TM][I]: ExitCode: 1
>> >> >>> >> >> >> >> >> > Thu Oct 31 11:18:03 2013 [TM][E]: Error executing
>> >> >>> >> >> >> >> >> > image
>> >> >>> >> >> >> >> >> > transfer
>> >> >>> >> >> >> >> >> > script:
>> >> >>> >> >> >> >> >> > Error copying
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> > ubuntuOpNeb:/var/lib/one/datastores/1/02e8c67d4f59826e9fb12ccb48f77557
>> >> >>> >> >> >> >> >> > to
>> >> >>> >> >> >> >> >> > demos:/var/lib/one/datastores/0/36/disk.0
>> >> >>> >> >> >> >> >> > Thu Oct 31 11:18:03 2013 [DiM][I]: New VM state is
>> >> >>> >> >> >> >> >> > FAILED
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> > ----------------------------------------------------------
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> > Here I put some features of my settings in
>> >> >>> >> >> >> >> >> > opennebula:
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> > The datastores are: 0, 1 and 2; the 0 and 1
>> >> >>> >> >> >> >> >> > datastores
>> >> >>> >> >> >> >> >> > are
>> >> >>> >> >> >> >> >> > shared,
>> >> >>> >> >> >> >> >> > and 2
>> >> >>> >> >> >> >> >> > is
>> >> >>> >> >> >> >> >> > ssh, Esxi works with 0 and 1 datastores.
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> > oned.conf file have TM configuration general for
>> >> >>> >> >> >> >> >> > all
>> >> >>> >> >> >> >> >> > hypervisors.
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> > Please help me for solved this problem.
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> > Thanks, Caty.
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> > _______________________________________________
>> >> >>> >> >> >> >> >> > Users mailing list
>> >> >>> >> >> >> >> >> > Users at lists.opennebula.org
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >> > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >> >>> >> >> >> >> >> >
>> >> >>> >> >> >> >> >
>> >> >>> >> >> >> >> >
>> >> >>> >> >> >> >
>> >> >>> >> >> >> >
>> >> >>> >> >> >>
>> >> >>> >> >> >>
>> >> >>> >> >> >> ------------------------------
>> >> >>> >> >> >>
>> >> >>> >> >> >> Message: 3
>> >> >>> >> >> >> Date: Mon, 11 Nov 2013 15:24:52 +0100
>> >> >>> >> >> >> From: Tino Vazquez <cvazquez at c12g.com>
>> >> >>> >> >> >> To: Andranik Hayrapetyan <andranik.h89 at gmail.com>
>> >> >>> >> >> >> Cc: users <users at lists.opennebula.org>
>> >> >>> >> >> >> Subject: Re: [one-users] Problem with oZones. Error 401
>> >> >>> >> >> >> while
>> >> >>> >> >> >> trying
>> >> >>> >> >> >> to access a zone
>> >> >>> >> >> >> Message-ID:
>> >> >>> >> >> >>
>> >> >>> >> >> >>
>> >> >>> >> >> >>
>> >> >>> >> >> >>
>> >> >>> >> >> >> <CAHfKwc0Q=FxRAkYtqQKJLLnSTi-mJZSFBKNz1vr1nQfou8oh6A at mail.gmail.com>
>> >> >>> >> >> >> Content-Type: text/plain; charset=ISO-8859-1
>> >> >>> >> >> >>
>> >> >>> >> >> >> Hi,
>> >> >>> >> >> >>
>> >> >>> >> >> >> The HTTP code (401) tells us that the credentials are not
>> >> >>> >> >> >> being
>> >> >>> >> >> >> recognize. Can you check that the oneadmin credentials
>> >> >>> >> >> >> used
>> >> >>> >> >> >> to
>> >> >>> >> >> >> create
>> >> >>> >> >> >> the 'not working' zone are indeed the right ones?
>> >> >>> >> >> >>
>> >> >>> >> >> >> The best way to find out would be to check the $ONE_AUTH
>> >> >>> >> >> >> file
>> >> >>> >> >> >> of
>> >> >>> >> >> >> the
>> >> >>> >> >> >> zone, and recreating the zone in oZones using those
>> >> >>> >> >> >> credentials.
>> >> >>> >> >> >>
>> >> >>> >> >> >> Best regards,
>> >> >>> >> >> >>
>> >> >>> >> >> >>
>> >> >>> >> >> >> -Tino
>> >> >>> >> >> >> --
>> >> >>> >> >> >> OpenNebula - Flexible Enterprise Cloud Made Simple
>> >> >>> >> >> >>
>> >> >>> >> >> >> --
>> >> >>> >> >> >> Constantino V?zquez Blanco, PhD, MSc
>> >> >>> >> >> >>
>> >> >>> >> >> >> Senior Infrastructure Architect at C12G Labs
>> >> >>> >> >> >> www.c12g.com | @C12G | es.linkedin.com/in/tinova
>> >> >>> >> >> >>
>> >> >>> >> >> >> --
>> >> >>> >> >> >> Confidentiality Warning: The information contained in this
>> >> >>> >> >> >> e-mail
>> >> >>> >> >> >> and
>> >> >>> >> >> >> any accompanying documents, unless otherwise expressly
>> >> >>> >> >> >> indicated,
>> >> >>> >> >> >> is
>> >> >>> >> >> >> confidential and privileged, and is intended solely for
>> >> >>> >> >> >> the
>> >> >>> >> >> >> person
>> >> >>> >> >> >> and/or entity to whom it is addressed (i.e. those
>> >> >>> >> >> >> identified
>> >> >>> >> >> >> in
>> >> >>> >> >> >> the
>> >> >>> >> >> >> "To" and "cc" box). They are the property of C12G Labs
>> >> >>> >> >> >> S.L..
>> >> >>> >> >> >> Unauthorized distribution, review, use, disclosure, or
>> >> >>> >> >> >> copying of
>> >> >>> >> >> >> this
>> >> >>> >> >> >> communication, or any part thereof, is strictly prohibited
>> >> >>> >> >> >> and
>> >> >>> >> >> >> may
>> >> >>> >> >> >> be
>> >> >>> >> >> >> unlawful. If you have received this e-mail in error,
>> >> >>> >> >> >> please
>> >> >>> >> >> >> notify
>> >> >>> >> >> >> us
>> >> >>> >> >> >> immediately by e-mail at abuse at c12g.com and delete the
>> >> >>> >> >> >> e-mail
>> >> >>> >> >> >> and
>> >> >>> >> >> >> attachments and any copy from your system. C12G thanks you
>> >> >>> >> >> >> for
>> >> >>> >> >> >> your
>> >> >>> >> >> >> cooperation.
>> >> >>> >> >> >>
>> >> >>> >> >> >>
>> >> >>> >> >> >> On Sat, Nov 9, 2013 at 11:06 AM, Andranik Hayrapetyan
>> >> >>> >> >> >> <andranik.h89 at gmail.com> wrote:
>> >> >>> >> >> >> > Good day.
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > I have setup OpenNebula 4.2 with ozones server. I have
>> >> >>> >> >> >> > added 3
>> >> >>> >> >> >> > zones
>> >> >>> >> >> >> > to
>> >> >>> >> >> >> > it
>> >> >>> >> >> >> > and created a VDC for each one. For 2 of them everything
>> >> >>> >> >> >> > works
>> >> >>> >> >> >> > just
>> >> >>> >> >> >> > fine. I
>> >> >>> >> >> >> > can access the sunstone web UI through my oZones server.
>> >> >>> >> >> >> > But
>> >> >>> >> >> >> > when
>> >> >>> >> >> >> > I
>> >> >>> >> >> >> > try
>> >> >>> >> >> >> > to
>> >> >>> >> >> >> > access the third one I see just blank browser. In
>> >> >>> >> >> >> > access.log of
>> >> >>> >> >> >> > my
>> >> >>> >> >> >> > httpd
>> >> >>> >> >> >> > I
>> >> >>> >> >> >> > see the following:
>> >> >>> >> >> >> > "GET /sunstone_MY_ZONE_3/ HTTP/1.1" 401 - "-"
>> >> >>> >> >> >> > "Mozilla/5.0
>> >> >>> >> >> >> > (X11;
>> >> >>> >> >> >> > Linux
>> >> >>> >> >> >> > x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Ubuntu
>> >> >>> >> >> >> > Chromium/MY_IP
>> >> >>> >> >> >> > Chrome/MY_IP Safari/537.36"
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > The Rewrite rules in my .htaccess are made the same way
>> >> >>> >> >> >> > for
>> >> >>> >> >> >> > each
>> >> >>> >> >> >> > VDC.
>> >> >>> >> >> >> > Here
>> >> >>> >> >> >> > is one of them:
>> >> >>> >> >> >> > RewriteRule ^MY_ZONE_3 http://IP_OF_ZONE:2633/RPC2 [P]
>> >> >>> >> >> >> > RewriteRule ^sunstone_MY_ZONE_3/(.+)
>> >> >>> >> >> >> > http://IP_OF_ZONE:9869//$1
>> >> >>> >> >> >> > [P]
>> >> >>> >> >> >> > RewriteRule ^sunstone_MY_ZONE_3 http://IP_OF_ZONE:9869//
>> >> >>> >> >> >> > [P]
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > What can I do to solve this problem? Can anyone help me,
>> >> >>> >> >> >> > please?
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > P.S. Sorry, my last email was sent by mistake. It was
>> >> >>> >> >> >> > incomplete.
>> >> >>> >> >> >>
>> >> >>> >> >> >> >
>> >> >>> >> >> >> >
>> >> >>> >> >> >> >
>> >> >>> >> >> >> >
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > _______________________________________________
>> >> >>> >> >> >> > Users mailing list
>> >> >>> >> >> >> > Users at lists.opennebula.org
>> >> >>> >> >> >> >
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >> >>> >> >> >> >
>> >> >>> >> >> >>
>> >> >>> >> >> >>
>> >> >>> >> >> >> ------------------------------
>> >> >>> >> >> >>
>> >> >>> >> >> >>
>> >> >>> >> >> >> _______________________________________________
>> >> >>> >> >> >> Users mailing list
>> >> >>> >> >> >> Users at lists.opennebula.org
>> >> >>> >> >> >>
>> >> >>> >> >> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >> >>> >> >> >>
>> >> >>> >> >> >>
>> >> >>> >> >> >> End of Users Digest, Vol 69, Issue 28
>> >> >>> >> >> >> *************************************
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> >
>> >> >>> >> >> > _______________________________________________
>> >> >>> >> >> > Users mailing list
>> >> >>> >> >> > Users at lists.opennebula.org
>> >> >>> >> >> >
>> >> >>> >> >> > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >> >>> >> >> >
>> >> >>> >> >
>> >> >>> >> >
>> >> >>> >> >
>> >> >>> >> > _______________________________________________
>> >> >>> >> > Users mailing list
>> >> >>> >> > Users at lists.opennebula.org
>> >> >>> >> > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >> >>> >> >
>> >> >>> >>
>> >> >>> >>
>> >> >>> >> ------------------------------
>> >> >>> >>
>> >> >>> >> _______________________________________________
>> >> >>> >> Users mailing list
>> >> >>> >> Users at lists.opennebula.org
>> >> >>> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >> >>> >>
>> >> >>> >>
>> >> >>> >> End of Users Digest, Vol 69, Issue 33
>> >> >>> >> *************************************
>> >> >>> >
>> >> >>> >
>> >> >>> >
>> >> >>> > _______________________________________________
>> >> >>> > Users mailing list
>> >> >>> > Users at lists.opennebula.org
>> >> >>> > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >> >>> >
>> >> >>>
>> >> >>>
>> >> >>> ------------------------------
>> >> >>>
>> >> >>> _______________________________________________
>> >> >>> Users mailing list
>> >> >>> Users at lists.opennebula.org
>> >> >>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >> >>>
>> >> >>>
>> >> >>> End of Users Digest, Vol 69, Issue 35
>> >> >>> *************************************
>> >> >>
>> >> >>
>> >> >>
>> >> >> _______________________________________________
>> >> >> Users mailing list
>> >> >> Users at lists.opennebula.org
>> >> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >> >>
>> >>
>> >>
>> >> ------------------------------
>> >>
>> >> _______________________________________________
>> >> Users mailing list
>> >> Users at lists.opennebula.org
>> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >>
>> >>
>> >> End of Users Digest, Vol 69, Issue 44
>> >> *************************************
>> >
>> >
>> >
>> > _______________________________________________
>> > Users mailing list
>> > Users at lists.opennebula.org
>> > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >
>>
>>
>> ------------------------------
>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.opennebula.org
>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>
>>
>> End of Users Digest, Vol 69, Issue 48
>> *************************************
>
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opennebula.org
> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>
More information about the Users
mailing list