[one-users] VM in Opennebula for Esxi 5.1 failed
Catalina Quinde
catalinaquinde at gmail.com
Tue Nov 12 20:43:45 PST 2013
Tino,
In my case Esxi is installed on a flash memory and the computer hard disk
has partitions with several other hypervisors
I used Vsphere client to create the datastores 102 and 103, with the
options Add Datastore, Disk / LUN .... but on the screen where you select
the hard disk on which to create the datastores, displayed the original
computer hard drive and not flash memory where you really should add the
datastore, then, there is an error message for creating datastore.
Can not change the host configuration
Call "HostDatastoreSystem.QueryVmfsDatastoreCreateOptions" for object
"ha-datastoresystem" on ESXi "192 168 147 131" failed....
Esxi is installed in flash memory.
Regards, Caty.
2013/11/12 < users-request at lists.opennebula.org>
> Send Users mailing list submissions to
> users at lists.opennebula.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
> or, via email, send a message with subject or body 'help' to
> users-request at lists.opennebula.org
>
> You can reach the person managing the list at
> users-owner at lists.opennebula.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Users digest..."
>
>
> Today's Topics:
>
> 1. Re: VM in Opennebula for Esxi 5.1 failed (Tino Vazquez)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 12 Nov 2013 18:36:43 +0100
> From: Tino Vazquez <tinova79 at gmail.com>
> To: Catalina Quinde <catalinaquinde at gmail.com>
> Cc: users <users at lists.opennebula.org>
> Subject: Re: [one-users] VM in Opennebula for Esxi 5.1 failed
> Message-ID:
> <
> CAHfKwc2LoKDt97kPZAjB4tCX5RqxddmbvBDRZqM6mauT1DNUvA at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Hi Catalina,
>
> You need to mount both datastores (102 and 103) in the ESX so they can
> access them. So, there should be the following routes present in the
> ESX
>
> * /vmfs/volumes/102
> * /vmfs/volumes/103
>
> Regards,
>
> -Tino
> --
> Constantino V?zquez Blanco, PhD, MSc
> Senior Infrastructure Architect at C12G Labs
> www.OpenNebula.org | @tinova79 | es.linkedin.com/in/tinova
>
>
> On Tue, Nov 12, 2013 at 4:52 PM, Catalina Quinde
> <catalinaquinde at gmail.com> wrote:
> > Tino, as I explained there are no directories created 102 and 103 in the
> /
> > vmfs / volumes on node Esxi.
> >
> > Thanks Tino.
> >
> >
> > 2013/11/12 <users-request at lists.opennebula.org>
> >>
> >> Send Users mailing list submissions to
> >> users at lists.opennebula.org
> >>
> >> To subscribe or unsubscribe via the World Wide Web, visit
> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
> >> or, via email, send a message with subject or body 'help' to
> >> users-request at lists.opennebula.org
> >>
> >> You can reach the person managing the list at
> >> users-owner at lists.opennebula.org
> >>
> >> When replying, please edit your Subject line so it is more specific
> >> than "Re: Contents of Users digest..."
> >>
> >>
> >> Today's Topics:
> >>
> >> 1. Re: VM in Opennebula for Esxi 5.1 failed (Tino Vazquez)
> >>
> >>
> >> ----------------------------------------------------------------------
> >>
> >> Message: 1
> >> Date: Tue, 12 Nov 2013 15:16:23 +0100
> >> From: Tino Vazquez <cvazquez at c12g.com>
> >> To: Catalina Quinde <catalinaquinde at gmail.com>
> >> Cc: users <users at lists.opennebula.org>
> >> Subject: Re: [one-users] VM in Opennebula for Esxi 5.1 failed
> >> Message-ID:
> >>
> >> <CAHfKwc1w930-f9oDhbLRG4GEzK9Au9HrC0D12nO8bjKqqF23dg at mail.gmail.com>
> >> Content-Type: text/plain; charset=ISO-8859-1
> >>
> >> Hi Catalina,
> >>
> >> Could you make sure that datastores 102 and 103 are mounted in the ESX
> >> hosts?
> >>
> >> Regards,
> >>
> >> -Tino
> >>
> >> --
> >> OpenNebula - Flexible Enterprise Cloud Made Simple
> >>
> >> --
> >> Constantino V?zquez Blanco, PhD, MSc
> >> Senior Infrastructure Architect at C12G Labs
> >> www.c12g.com | @C12G | es.linkedin.com/in/tinova
> >>
> >> --
> >> Confidentiality Warning: The information contained in this e-mail and
> >> any accompanying documents, unless otherwise expressly indicated, is
> >> confidential and privileged, and is intended solely for the person
> >> and/or entity to whom it is addressed (i.e. those identified in the
> >> "To" and "cc" box). They are the property of C12G Labs S.L..
> >> Unauthorized distribution, review, use, disclosure, or copying of this
> >> communication, or any part thereof, is strictly prohibited and may be
> >> unlawful. If you have received this e-mail in error, please notify us
> >> immediately by e-mail at abuse at c12g.com and delete the e-mail and
> >> attachments and any copy from your system. C12G thanks you for your
> >> cooperation.
> >>
> >>
> >> On Tue, Nov 12, 2013 at 10:55 AM, Tino Vazquez <cvazquez at c12g.com>
> wrote:
> >> > Hi Catalina,
> >> >
> >> > So, the connectivity to the host seems to be OK, but still the monitor
> >> > data doesn't look valid. Let's try to figure out why.
> >> >
> >> > What's the output of the following (as oneadmin, in the front-end)
> >> >
> >> > $ ssh 92.168.147.131 "df -m | grep /vmfs/volumes/103"
> >> >
> >> > Regards,
> >> >
> >> > -Tino
> >> > --
> >> > OpenNebula - Flexible Enterprise Cloud Made Simple
> >> >
> >> > --
> >> > Constantino V?zquez Blanco, PhD, MSc
> >> > Senior Infrastructure Architect at C12G Labs
> >> > www.c12g.com | @C12G | es.linkedin.com/in/tinova
> >> >
> >> > --
> >> > Confidentiality Warning: The information contained in this e-mail and
> >> > any accompanying documents, unless otherwise expressly indicated, is
> >> > confidential and privileged, and is intended solely for the person
> >> > and/or entity to whom it is addressed (i.e. those identified in the
> >> > "To" and "cc" box). They are the property of C12G Labs S.L..
> >> > Unauthorized distribution, review, use, disclosure, or copying of this
> >> > communication, or any part thereof, is strictly prohibited and may be
> >> > unlawful. If you have received this e-mail in error, please notify us
> >> > immediately by e-mail at abuse at c12g.com and delete the e-mail and
> >> > attachments and any copy from your system. C12G thanks you for your
> >> > cooperation.
> >> >
> >> >
> >> > On Mon, Nov 11, 2013 at 8:20 PM, Catalina Quinde
> >> > <catalinaquinde at gmail.com> wrote:
> >> >> Hi Tino, this displays
> >> >>
> >> >> oneadmin at ubuntuOpNeb:~$ bash -x
> >> >> /var/lib/one/remotes/datastore/vmfs/monitor
> >> >>
> >> >>
> 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
> W0N
> >>
> >>
> EQVRBW0lNQUdFX0RTXV0+PC9UWVBFPjwvVEVNUExBVEU+PC9EQVRBU1RPUkU+PC9EU19EUklWRVJfQUNUSU9OX0RBVEE+
> >> >> 103
> >> >> + '[' -z '' ']'
> >> >> + LIB_LOCATION=/usr/lib/one
> >> >> + . /usr/lib/one/sh/scripts_common.sh
> >> >> ++ export LANG=C
> >> >> ++ LANG=C
> >> >> ++ export
> >> >>
> >> >>
> PATH=/bin:/sbin:/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
> >> >> ++
> >> >>
> >> >>
> PATH=/bin:/sbin:/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
> >> >> ++ AWK=awk
> >> >> ++ BASH=bash
> >> >> ++ CUT=cut
> >> >> ++ DATE=date
> >> >> ++ DD=dd
> >> >> ++ DU=du
> >> >> ++ GREP=grep
> >> >> ++ ISCSIADM=iscsiadm
> >> >> ++ LVCREATE=lvcreate
> >> >> ++ LVREMOVE=lvremove
> >> >> ++ LVRENAME=lvrename
> >> >> ++ LVS=lvs
> >> >> ++ LN=ln
> >> >> ++ MD5SUM=md5sum
> >> >> ++ MKFS=mkfs
> >> >> ++ MKISOFS=genisoimage
> >> >> ++ MKSWAP=mkswap
> >> >> ++ QEMU_IMG=qemu-img
> >> >> ++ RADOS=rados
> >> >> ++ RBD=rbd
> >> >> ++ READLINK=readlink
> >> >> ++ RM=rm
> >> >> ++ SCP=scp
> >> >> ++ SED=sed
> >> >> ++ SSH=ssh
> >> >> ++ SUDO=sudo
> >> >> ++ SYNC=sync
> >> >> ++ TAR=tar
> >> >> ++ TGTADM=tgtadm
> >> >> ++ TGTADMIN=tgt-admin
> >> >> ++ TGTSETUPLUN=tgt-setup-lun-one
> >> >> ++ VMKFSTOOLS=vmkfstools
> >> >> ++ WGET=wget
> >> >> +++ uname -s
> >> >> ++ '[' xLinux = xLinux ']'
> >> >> ++ SED='sed -r'
> >> >> +++ basename /var/lib/one/remotes/datastore/vmfs/monitor
> >> >> ++ SCRIPT_NAME=monitor
> >> >> ++ dirname /var/lib/one/remotes/datastore/vmfs/monitor
> >> >> + DRIVER_PATH=/var/lib/one/remotes/datastore/vmfs
> >> >> + source /var/lib/one/remotes/datastore/vmfs/../libfs.sh
> >> >> +
> >> >>
> >> >>
> DRV_ACTION=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
> jxU
> >>
> >>
> WVBFPjwhW0NEQVRBW0lNQUdFX0RTXV0+PC9UWVBFPjwvVEVNUExBVEU+PC9EQVRBU1RPUkU+PC9EU19EUklWRVJfQUNUSU9OX0RBVEE+
> >> >> + ID=103
> >> >> + XPATH='/var/lib/one/remotes/datastore/vmfs/../xpath.rb -b
> >> >>
> >> >>
> 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
> W0N
> >>
> >>
> EQVRBW0lNQUdFX0RTXV0+PC9UWVBFPjwvVEVNUExBVEU+PC9EQVRBU1RPUkU+PC9EU19EUklWRVJfQUNUSU9OX0RBVEE+'
> >> >> + unset i XPATH_ELEMENTS
> >> >> + IFS=
> >> >> + read -r -d '' element
> >> >> ++ /var/lib/one/remotes/datastore/vmfs/../xpath.rb -b
> >> >>
> >> >>
> 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
> W0N
> >>
> >>
> EQVRBW0lNQUdFX0RTXV0+PC9UWVBFPjwvVEVNUExBVEU+PC9EQVRBU1RPUkU+PC9EU19EUklWRVJfQUNUSU9OX0RBVEE+
> >> >> /DS_DRIVER_ACTION_DATA/DATASTORE/BASE_PATH
> >> >> /DS_DRIVER_ACTION_DATA/DATASTORE/TEMPLATE/BRIDGE_LIST
> >> >> + XPATH_ELEMENTS[i++]=/vmfs/volumes/103
> >> >> + IFS=
> >> >> + read -r -d '' element
> >> >> + XPATH_ELEMENTS[i++]=192.168.147.131
> >> >> + IFS=
> >> >> + read -r -d '' element
> >> >> + BASE_PATH=/vmfs/volumes/103
> >> >> + BRIDGE_LIST=192.168.147.131
> >> >> ++ get_destination_host 103
> >> >> ++ HOSTS_ARRAY=($BRIDGE_LIST)
> >> >> +++ expr 103 % 1
> >> >> ++ ARRAY_INDEX=0
> >> >> ++ echo 192.168.147.131
> >> >> + HOST=192.168.147.131
> >> >> ++ cat
> >> >> + MONITOR_SCRIPT='USED_MB=$(du -sLm /vmfs/volumes/103 2>/dev/null |
> cut
> >> >> -f1)
> >> >>
> >> >> DF_STR=$(df -m | grep /vmfs/volumes/103 | sed '\''s/ \+/:/g'\'')
> >> >>
> >> >> TOTAL_MB=$(echo $DF_STR | cut -d'\'':'\'' -f 2)
> >> >> FREE_MB=$(echo $DF_STR | cut -d'\'':'\'' -f 4)
> >> >>
> >> >> echo "USED_MB=$USED_MB"
> >> >> echo "TOTAL_MB=$TOTAL_MB"
> >> >> echo "FREE_MB=$FREE_MB"'
> >> >> ++ ssh_monitor_and_log 192.168.147.131 'USED_MB=$(du -sLm
> >> >> /vmfs/volumes/103
> >> >> 2>/dev/null | cut -f1)
> >> >>
> >> >> DF_STR=$(df -m | grep /vmfs/volumes/103 | sed '\''s/ \+/:/g'\'')
> >> >>
> >> >> TOTAL_MB=$(echo $DF_STR | cut -d'\'':'\'' -f 2)
> >> >> FREE_MB=$(echo $DF_STR | cut -d'\'':'\'' -f 4)
> >> >>
> >> >> echo "USED_MB=$USED_MB"
> >> >> echo "TOTAL_MB=$TOTAL_MB"
> >> >> echo "FREE_MB=$FREE_MB"'
> >> >> + MONITOR_DATA='+++ ssh 192.168.147.131 sh -s
> >> >> ++ SSH_EXEC_OUT='\''USED_MB=
> >> >> TOTAL_MB=
> >> >> FREE_MB='\''
> >> >> ++ SSH_EXEC_RC=0
> >> >> ++ '\''['\'' 0 -ne 0 '\'']'\''
> >> >> ++ echo USED_MB= TOTAL_MB= FREE_MB=
> >> >> USED_MB= TOTAL_MB= FREE_MB='
> >> >> + MONITOR_STATUS=0
> >> >> + '[' 0 = 0 ']'
> >> >> + tr ' ' '\n'
> >> >> + echo '+++ ssh 192.168.147.131 sh -s
> >> >> ++ SSH_EXEC_OUT='\''USED_MB=
> >> >> TOTAL_MB=
> >> >> FREE_MB='\''
> >> >> ++ SSH_EXEC_RC=0
> >> >> ++ '\''['\'' 0 -ne 0 '\'']'\''
> >> >> ++ echo USED_MB= TOTAL_MB= FREE_MB=
> >> >> USED_MB= TOTAL_MB= FREE_MB='
> >> >> +++
> >> >> ssh
> >> >> 192.168.147.131
> >> >> sh
> >> >> -s
> >> >> ++
> >> >> SSH_EXEC_OUT='USED_MB=
> >> >> TOTAL_MB=
> >> >> FREE_MB='
> >> >> ++
> >> >> SSH_EXEC_RC=0
> >> >> ++
> >> >> '['
> >> >> 0
> >> >> -ne
> >> >> 0
> >> >> ']'
> >> >> ++
> >> >> echo
> >> >> USED_MB=
> >> >> TOTAL_MB=
> >> >> FREE_MB=
> >> >> USED_MB=
> >> >> TOTAL_MB=
> >> >> FREE_MB=
> >> >> oneadmin at ubuntuOpNeb:~$
> >> >>
> >> >>
> >> >>
> >> >> 2013/11/11 <users-request at lists.opennebula.org>
> >> >>>
> >> >>> Send Users mailing list submissions to
> >> >>> users at lists.opennebula.org
> >> >>>
> >> >>> To subscribe or unsubscribe via the World Wide Web, visit
> >> >>>
> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
> >> >>> or, via email, send a message with subject or body 'help' to
> >> >>> users-request at lists.opennebula.org
> >> >>>
> >> >>> You can reach the person managing the list at
> >> >>> users-owner at lists.opennebula.org
> >> >>>
> >> >>> When replying, please edit your Subject line so it is more specific
> >> >>> than "Re: Contents of Users digest..."
> >> >>>
> >> >>>
> >> >>> Today's Topics:
> >> >>>
> >> >>> 1. Re: VM in Opennebula for Esxi 5.1 failed (Tino Vazquez)
> >> >>>
> >> >>>
> >> >>>
> ----------------------------------------------------------------------
> >> >>>
> >> >>> Message: 1
> >> >>> Date: Mon, 11 Nov 2013 18:20:21 +0100
> >> >>> From: Tino Vazquez <cvazquez at c12g.com>
> >> >>> To: Catalina Quinde <catalinaquinde at gmail.com>
> >> >>> Cc: users <users at lists.opennebula.org>
> >> >>> Subject: Re: [one-users] VM in Opennebula for Esxi 5.1 failed
> >> >>> Message-ID:
> >> >>>
> >> >>> <CAHfKwc3Q1_pp_Xg6p9TujOyELvrSZuzzp=E+FzCKovmEEUaS8A at mail.gmail.com
> >
> >> >>> Content-Type: text/plain; charset=ISO-8859-1
> >> >>>
> >> >>> Hi Catalina,
> >> >>>
> >> >>> You need to execute it as a single line. you can copy it from this
> >> >>> gist:
> >> >>>
> >> >>> https://gist.github.com/jfontan/aea29c477d597f3c97f8
> >> >>>
> >> >>> Regards,
> >> >>>
> >> >>> -Tino
> >> >>>
> >> >>> --
> >> >>> OpenNebula - Flexible Enterprise Cloud Made Simple
> >> >>>
> >> >>> --
> >> >>> Constantino V?zquez Blanco, PhD, MSc
> >> >>> Senior Infrastructure Architect at C12G Labs
> >> >>> www.c12g.com | @C12G | es.linkedin.com/in/tinova
> >> >>>
> >> >>> --
> >> >>> Confidentiality Warning: The information contained in this e-mail
> and
> >> >>> any accompanying documents, unless otherwise expressly indicated, is
> >> >>> confidential and privileged, and is intended solely for the person
> >> >>> and/or entity to whom it is addressed (i.e. those identified in the
> >> >>> "To" and "cc" box). They are the property of C12G Labs S.L..
> >> >>> Unauthorized distribution, review, use, disclosure, or copying of
> this
> >> >>> communication, or any part thereof, is strictly prohibited and may
> be
> >> >>> unlawful. If you have received this e-mail in error, please notify
> us
> >> >>> immediately by e-mail at abuse at c12g.com and delete the e-mail and
> >> >>> attachments and any copy from your system. C12G thanks you for your
> >> >>> cooperation.
> >> >>>
> >> >>>
> >> >>> On Mon, Nov 11, 2013 at 6:14 PM, Catalina Quinde
> >> >>> <catalinaquinde at gmail.com> wrote:
> >> >>> > Ready this command displays
> >> >>> >
> >> >>> > oneadmin at ubuntuOpNeb:~$ bash -x
> >> >>> > /var/lib/one/remotes/datastore/vmfs/monitor
> >> >>> > + '[' -z '' ']'
> >> >>> > + LIB_LOCATION=/usr/lib/one
> >> >>> > + . /usr/lib/one/sh/scripts_common.sh
> >> >>> > ++ export LANG=C
> >> >>> > ++ LANG=C
> >> >>> > ++ export
> >> >>> >
> >> >>> >
> >> >>> >
> PATH=/bin:/sbin:/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
> >> >>> > ++
> >> >>> >
> >> >>> >
> >> >>> >
> PATH=/bin:/sbin:/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
> >> >>> > ++ AWK=awk
> >> >>> > ++ BASH=bash
> >> >>> > ++ CUT=cut
> >> >>> > ++ DATE=date
> >> >>> > ++ DD=dd
> >> >>> > ++ DU=du
> >> >>> > ++ GREP=grep
> >> >>> > ++ ISCSIADM=iscsiadm
> >> >>> > ++ LVCREATE=lvcreate
> >> >>> > ++ LVREMOVE=lvremove
> >> >>> > ++ LVRENAME=lvrename
> >> >>> > ++ LVS=lvs
> >> >>> > ++ LN=ln
> >> >>> > ++ MD5SUM=md5sum
> >> >>> > ++ MKFS=mkfs
> >> >>> > ++ MKISOFS=genisoimage
> >> >>> > ++ MKSWAP=mkswap
> >> >>> > ++ QEMU_IMG=qemu-img
> >> >>> > ++ RADOS=rados
> >> >>> > ++ RBD=rbd
> >> >>> > ++ READLINK=readlink
> >> >>> > ++ RM=rm
> >> >>> > ++ SCP=scp
> >> >>> > ++ SED=sed
> >> >>> > ++ SSH=ssh
> >> >>> > ++ SUDO=sudo
> >> >>> > ++ SYNC=sync
> >> >>> > ++ TAR=tar
> >> >>> > ++ TGTADM=tgtadm
> >> >>> > ++ TGTADMIN=tgt-admin
> >> >>> > ++ TGTSETUPLUN=tgt-setup-lun-one
> >> >>> > ++ VMKFSTOOLS=vmkfstools
> >> >>> > ++ WGET=wget
> >> >>> > +++ uname -s
> >> >>> > ++ '[' xLinux = xLinux ']'
> >> >>> > ++ SED='sed -r'
> >> >>> > +++ basename /var/lib/one/remotes/datastore/vmfs/monitor
> >> >>> > ++ SCRIPT_NAME=monitor
> >> >>> > ++ dirname /var/lib/one/remotes/datastore/vmfs/monitor
> >> >>> > + DRIVER_PATH=/var/lib/one/remotes/datastore/vmfs
> >> >>> > + source /var/lib/one/remotes/datastore/vmfs/../libfs.sh
> >> >>> > + DRV_ACTION=
> >> >>> > + ID=
> >> >>> > + XPATH='/var/lib/one/remotes/datastore/vmfs/../xpath.rb -b '
> >> >>> > + unset i XPATH_ELEMENTS
> >> >>> > + IFS=
> >> >>> > + read -r -d '' element
> >> >>> > ++ /var/lib/one/remotes/datastore/vmfs/../xpath.rb -b
> >> >>> > /DS_DRIVER_ACTION_DATA/DATASTORE/BASE_PATH
> >> >>> > /DS_DRIVER_ACTION_DATA/DATASTORE/TEMPLATE/BRIDGE_LIST
> >> >>> > /var/lib/one/remotes/datastore/vmfs/../xpath.rb:61: undefined
> method
> >> >>> > `elements' for nil:NilClass (NoMethodError)
> >> >>> > from /var/lib/one/remotes/datastore/vmfs/../xpath.rb:60:in
> >> >>> > `each'
> >> >>> > from /var/lib/one/remotes/datastore/vmfs/../xpath.rb:60
> >> >>> > + BASE_PATH=
> >> >>> > + BRIDGE_LIST=
> >> >>> > ++ get_destination_host
> >> >>> > ++ HOSTS_ARRAY=($BRIDGE_LIST)
> >> >>> > +++ expr % 0
> >> >>> > expr: syntax error
> >> >>> > ++ ARRAY_INDEX=
> >> >>> > ++ echo
> >> >>> > + HOST=
> >> >>> > ++ cat
> >> >>> > + MONITOR_SCRIPT='USED_MB=$(du -sLm 2>/dev/null | cut -f1)
> >> >>> >
> >> >>> > DF_STR=$(df -m | grep | sed '\''s/ \+/:/g'\'')
> >> >>> >
> >> >>> > TOTAL_MB=$(echo $DF_STR | cut -d'\'':'\'' -f 2)
> >> >>> > FREE_MB=$(echo $DF_STR | cut -d'\'':'\'' -f 4)
> >> >>> >
> >> >>> > echo "USED_MB=$USED_MB"
> >> >>> > echo "TOTAL_MB=$TOTAL_MB"
> >> >>> > echo "FREE_MB=$FREE_MB"'
> >> >>> > ++ ssh_monitor_and_log 'USED_MB=$(du -sLm 2>/dev/null | cut -f1)
> >> >>> >
> >> >>> > DF_STR=$(df -m | grep | sed '\''s/ \+/:/g'\'')
> >> >>> >
> >> >>> > TOTAL_MB=$(echo $DF_STR | cut -d'\'':'\'' -f 2)
> >> >>> > FREE_MB=$(echo $DF_STR | cut -d'\'':'\'' -f 4)
> >> >>> >
> >> >>> > echo "USED_MB=$USED_MB"
> >> >>> > echo "TOTAL_MB=$TOTAL_MB"
> >> >>> > echo "FREE_MB=$FREE_MB"'
> >> >>> > + MONITOR_DATA='+++ ssh '\''USED_MB=$(du'\'' -sLm
> >> >>> > '\''2>/dev/null'\''
> >> >>> > '\''|'\'' cut '\''-f1)'\'' '\''DF_STR=$(df'\'' -m '\''|'\'' grep
> >> >>> > '\''|'\''
> >> >>> > sed '\'''\''\'\'''\''s/'\'' '\''\+/:/g'\''\'\'''\'')'\''
> >> >>> > '\''TOTAL_MB=$(echo'\'' '\''$DF_STR'\'' '\''|'\'' cut
> >> >>> > '\''-d'\''\'\'''\'':'\''\'\'''\'''\'' -f '\''2)'\''
> >> >>> > '\''FREE_MB=$(echo'\''
> >> >>> > '\''$DF_STR'\'' '\''|'\'' cut
> '\''-d'\''\'\'''\'':'\''\'\'''\'''\''
> >> >>> > -f
> >> >>> > '\''4)'\'' echo '\''"USED_MB=$USED_MB"'\'' echo
> >> >>> > '\''"TOTAL_MB=$TOTAL_MB"'\''
> >> >>> > echo '\''"FREE_MB=$FREE_MB"'\'' sh -s
> >> >>> > ++ SSH_EXEC_OUT=
> >> >>> > ++ SSH_EXEC_RC=255
> >> >>> > ++ '\''['\'' 255 -ne 0 '\'']'\''
> >> >>> > ++ log_error '\''Command "" failed: '\''
> >> >>> > ++ log_function ERROR '\''Command "" failed: '\''
> >> >>> > ++ echo '\''ERROR: monitor: Command "" failed: '\''
> >> >>> > ERROR: monitor: Command "" failed:
> >> >>> > ++ error_message '\''Cannot monitor USED_MB=$(du -sLm
> 2>/dev/null |
> >> >>> > cut
> >> >>> > -f1)
> >> >>> >
> >> >>> > DF_STR=$(df -m | grep | sed '\''\'\'''\''s/ \+/:/g'\''\'\'''\'')
> >> >>> >
> >> >>> > TOTAL_MB=$(echo $DF_STR | cut -d'\''\'\'''\'':'\''\'\'''\'' -f 2)
> >> >>> > FREE_MB=$(echo $DF_STR | cut -d'\''\'\'''\'':'\''\'\'''\'' -f 4)
> >> >>> >
> >> >>> > echo "USED_MB=$USED_MB"
> >> >>> > echo "TOTAL_MB=$TOTAL_MB"
> >> >>> > echo "FREE_MB=$FREE_MB"'\''
> >> >>> > ++ echo '\''ERROR MESSAGE --8<------'\''
> >> >>> > ERROR MESSAGE --8<------
> >> >>> > ++ echo '\''Cannot monitor USED_MB=$(du -sLm 2>/dev/null | cut
> -f1)
> >> >>> >
> >> >>> > DF_STR=$(df -m | grep | sed '\''\'\'''\''s/ \+/:/g'\''\'\'''\'')
> >> >>> >
> >> >>> > TOTAL_MB=$(echo $DF_STR | cut -d'\''\'\'''\'':'\''\'\'''\'' -f 2)
> >> >>> > FREE_MB=$(echo $DF_STR | cut -d'\''\'\'''\'':'\''\'\'''\'' -f 4)
> >> >>> >
> >> >>> > echo "USED_MB=$USED_MB"
> >> >>> > echo "TOTAL_MB=$TOTAL_MB"
> >> >>> > echo "FREE_MB=$FREE_MB"'\''
> >> >>> > Cannot monitor USED_MB=$(du -sLm 2>/dev/null | cut -f1)
> >> >>> >
> >> >>> > DF_STR=$(df -m | grep | sed '\''s/ \+/:/g'\'')
> >> >>> >
> >> >>> > TOTAL_MB=$(echo $DF_STR | cut -d'\'':'\'' -f 2)
> >> >>> > FREE_MB=$(echo $DF_STR | cut -d'\'':'\'' -f 4)
> >> >>> >
> >> >>> > echo "USED_MB=$USED_MB"
> >> >>> > echo "TOTAL_MB=$TOTAL_MB"
> >> >>> > echo "FREE_MB=$FREE_MB"
> >> >>> > ++ echo '\''ERROR MESSAGE ------>8--'\''
> >> >>> > ERROR MESSAGE ------>8--
> >> >>> > ++ exit 255'
> >> >>> > + MONITOR_STATUS=255
> >> >>> > + '[' 255 = 0 ']'
> >> >>> > + echo '+++ ssh '\''USED_MB=$(du'\'' -sLm '\''2>/dev/null'\''
> >> >>> > '\''|'\''
> >> >>> > cut
> >> >>> > '\''-f1)'\'' '\''DF_STR=$(df'\'' -m '\''|'\'' grep '\''|'\'' sed
> >> >>> > '\'''\''\'\'''\''s/'\'' '\''\+/:/g'\''\'\'''\'')'\''
> >> >>> > '\''TOTAL_MB=$(echo'\''
> >> >>> > '\''$DF_STR'\'' '\''|'\'' cut
> '\''-d'\''\'\'''\'':'\''\'\'''\'''\''
> >> >>> > -f
> >> >>> > '\''2)'\'' '\''FREE_MB=$(echo'\'' '\''$DF_STR'\'' '\''|'\'' cut
> >> >>> > '\''-d'\''\'\'''\'':'\''\'\'''\'''\'' -f '\''4)'\'' echo
> >> >>> > '\''"USED_MB=$USED_MB"'\'' echo '\''"TOTAL_MB=$TOTAL_MB"'\'' echo
> >> >>> > '\''"FREE_MB=$FREE_MB"'\'' sh -s
> >> >>> > ++ SSH_EXEC_OUT=
> >> >>> > ++ SSH_EXEC_RC=255
> >> >>> > ++ '\''['\'' 255 -ne 0 '\'']'\''
> >> >>> > ++ log_error '\''Command "" failed: '\''
> >> >>> > ++ log_function ERROR '\''Command "" failed: '\''
> >> >>> > ++ echo '\''ERROR: monitor: Command "" failed: '\''
> >> >>> > ERROR: monitor: Command "" failed:
> >> >>> > ++ error_message '\''Cannot monitor USED_MB=$(du -sLm
> 2>/dev/null |
> >> >>> > cut
> >> >>> > -f1)
> >> >>> >
> >> >>> > DF_STR=$(df -m | grep | sed '\''\'\'''\''s/ \+/:/g'\''\'\'''\'')
> >> >>> >
> >> >>> > TOTAL_MB=$(echo $DF_STR | cut -d'\''\'\'''\'':'\''\'\'''\'' -f 2)
> >> >>> > FREE_MB=$(echo $DF_STR | cut -d'\''\'\'''\'':'\''\'\'''\'' -f 4)
> >> >>> >
> >> >>> > echo "USED_MB=$USED_MB"
> >> >>> > echo "TOTAL_MB=$TOTAL_MB"
> >> >>> > echo "FREE_MB=$FREE_MB"'\''
> >> >>> > ++ echo '\''ERROR MESSAGE --8<------'\''
> >> >>> > ERROR MESSAGE --8<------
> >> >>> > ++ echo '\''Cannot monitor USED_MB=$(du -sLm 2>/dev/null | cut
> -f1)
> >> >>> >
> >> >>> > DF_STR=$(df -m | grep | sed '\''\'\'''\''s/ \+/:/g'\''\'\'''\'')
> >> >>> >
> >> >>> > TOTAL_MB=$(echo $DF_STR | cut -d'\''\'\'''\'':'\''\'\'''\'' -f 2)
> >> >>> > FREE_MB=$(echo $DF_STR | cut -d'\''\'\'''\'':'\''\'\'''\'' -f 4)
> >> >>> >
> >> >>> > echo "USED_MB=$USED_MB"
> >> >>> > echo "TOTAL_MB=$TOTAL_MB"
> >> >>> > echo "FREE_MB=$FREE_MB"'\''
> >> >>> > Cannot monitor USED_MB=$(du -sLm 2>/dev/null | cut -f1)
> >> >>> >
> >> >>> > DF_STR=$(df -m | grep | sed '\''s/ \+/:/g'\'')
> >> >>> >
> >> >>> > TOTAL_MB=$(echo $DF_STR | cut -d'\'':'\'' -f 2)
> >> >>> > FREE_MB=$(echo $DF_STR | cut -d'\'':'\'' -f 4)
> >> >>> >
> >> >>> > echo "USED_MB=$USED_MB"
> >> >>> > echo "TOTAL_MB=$TOTAL_MB"
> >> >>> > echo "FREE_MB=$FREE_MB"
> >> >>> > ++ echo '\''ERROR MESSAGE ------>8--'\''
> >> >>> > ERROR MESSAGE ------>8--
> >> >>> > ++ exit 255'
> >> >>> > +++ ssh 'USED_MB=$(du' -sLm '2>/dev/null' '|' cut '-f1)'
> >> >>> > 'DF_STR=$(df'
> >> >>> > -m
> >> >>> > '|' grep '|' sed ''\''s/' '\+/:/g'\'')' 'TOTAL_MB=$(echo'
> '$DF_STR'
> >> >>> > '|'
> >> >>> > cut
> >> >>> > '-d'\'':'\''' -f '2)' 'FREE_MB=$(echo' '$DF_STR' '|' cut
> >> >>> > '-d'\'':'\'''
> >> >>> > -f
> >> >>> > '4)' echo '"USED_MB=$USED_MB"' echo '"TOTAL_MB=$TOTAL_MB"' echo
> >> >>> > '"FREE_MB=$FREE_MB"' sh -s
> >> >>> > ++ SSH_EXEC_OUT=
> >> >>> > ++ SSH_EXEC_RC=255
> >> >>> > ++ '[' 255 -ne 0 ']'
> >> >>> > ++ log_error 'Command "" failed: '
> >> >>> > ++ log_function ERROR 'Command "" failed: '
> >> >>> > ++ echo 'ERROR: monitor: Command "" failed: '
> >> >>> > ERROR: monitor: Command "" failed:
> >> >>> > ++ error_message 'Cannot monitor USED_MB=$(du -sLm 2>/dev/null |
> >> >>> > cut
> >> >>> > -f1)
> >> >>> >
> >> >>> > DF_STR=$(df -m | grep | sed '\''s/ \+/:/g'\'')
> >> >>> >
> >> >>> > TOTAL_MB=$(echo $DF_STR | cut -d'\'':'\'' -f 2)
> >> >>> > FREE_MB=$(echo $DF_STR | cut -d'\'':'\'' -f 4)
> >> >>> >
> >> >>> > echo "USED_MB=$USED_MB"
> >> >>> > echo "TOTAL_MB=$TOTAL_MB"
> >> >>> > echo "FREE_MB=$FREE_MB"'
> >> >>> > ++ echo 'ERROR MESSAGE --8<------'
> >> >>> > ERROR MESSAGE --8<------
> >> >>> > ++ echo 'Cannot monitor USED_MB=$(du -sLm 2>/dev/null | cut -f1)
> >> >>> >
> >> >>> > DF_STR=$(df -m | grep | sed '\''s/ \+/:/g'\'')
> >> >>> >
> >> >>> > TOTAL_MB=$(echo $DF_STR | cut -d'\'':'\'' -f 2)
> >> >>> > FREE_MB=$(echo $DF_STR | cut -d'\'':'\'' -f 4)
> >> >>> >
> >> >>> > echo "USED_MB=$USED_MB"
> >> >>> > echo "TOTAL_MB=$TOTAL_MB"
> >> >>> > echo "FREE_MB=$FREE_MB"'
> >> >>> > Cannot monitor USED_MB=$(du -sLm 2>/dev/null | cut -f1)
> >> >>> >
> >> >>> > DF_STR=$(df -m | grep | sed 's/ \+/:/g')
> >> >>> >
> >> >>> > TOTAL_MB=$(echo $DF_STR | cut -d':' -f 2)
> >> >>> > FREE_MB=$(echo $DF_STR | cut -d':' -f 4)
> >> >>> >
> >> >>> > echo "USED_MB=$USED_MB"
> >> >>> > echo "TOTAL_MB=$TOTAL_MB"
> >> >>> > echo "FREE_MB=$FREE_MB"
> >> >>> > ++ echo 'ERROR MESSAGE ------>8--'
> >> >>> > ERROR MESSAGE ------>8--
> >> >>> > ++ exit 255
> >> >>> > + exit 255
> >> >>> >
> >> >>> >
> >> >>> >
> >> >>> > 2013/11/11 <users-request at lists.opennebula.org>
> >> >>> >>
> >> >>> >> Send Users mailing list submissions to
> >> >>> >> users at lists.opennebula.org
> >> >>> >>
> >> >>> >> To subscribe or unsubscribe via the World Wide Web, visit
> >> >>> >>
> >> >>> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
> >> >>> >> or, via email, send a message with subject or body 'help' to
> >> >>> >> users-request at lists.opennebula.org
> >> >>> >>
> >> >>> >> You can reach the person managing the list at
> >> >>> >> users-owner at lists.opennebula.org
> >> >>> >>
> >> >>> >> When replying, please edit your Subject line so it is more
> specific
> >> >>> >> than "Re: Contents of Users digest..."
> >> >>> >>
> >> >>> >>
> >> >>> >> Today's Topics:
> >> >>> >>
> >> >>> >> 1. Re: VM in Opennebula for Esxi 5.1 failed (Hans-Joachim
> >> >>> >> Ehlers)
> >> >>> >>
> >> >>> >> 2. Re: VM in Opennebula for Esxi 5.1 failed (Tino Vazquez)
> >> >>> >>
> >> >>> >>
> >> >>> >>
> >> >>> >>
> ----------------------------------------------------------------------
> >> >>> >>
> >> >>> >> Message: 1
> >> >>> >> Date: Mon, 11 Nov 2013 17:55:24 +0100
> >> >>> >> From: Hans-Joachim Ehlers <HansJoachim.Ehlers at eumetsat.int>
> >> >>> >> To: 'Catalina Quinde' <catalinaquinde at gmail.com>,
> >> >>> >> "Users at lists.opennebula.org"
> >> >>> >> <Users at lists.opennebula.org>
> >> >>> >>
> >> >>> >> Subject: Re: [one-users] VM in Opennebula for Esxi 5.1 failed
> >> >>> >> Message-ID:
> >> >>> >>
> >> >>> >>
> >> >>> >>
> >> >>> >> <
> A3ADF8C56ADA0F45BC34F904A6514E280151E8A95E66 at EXW10.eum.root.eumetsat.int>
> >> >>> >>
> >> >>> >> Content-Type: text/plain; charset="windows-1252"
> >> >>> >>
> >> >>> >>
> >> >>> >> Use the following ONELINER ....
> >> >>> >>
> >> >>> >> $ bash -x /var/lib/one/remotes/datastore/vmfs/monitor
> >> >>> >>
> >> >>> >> From: users-bounces at lists.opennebula.org
> >> >>> >> [mailto:users-bounces at lists.opennebula.org] On Behalf Of
> Catalina
> >> >>> >> Quinde
> >> >>> >> Sent: Monday, November 11, 2013 5:50 PM
> >> >>> >> To: Users at lists.opennebula.org
> >> >>> >> Subject: Re: [one-users] VM in Opennebula for Esxi 5.1 failed
> >> >>> >>
> >> >>> >> Hi Tino,
> >> >>> >> The comand bash -x /var/lib/one/remotes can't execution because
> >> >>> >> this is
> >> >>> >> directory:
> >> >>> >>
> >> >>> >> oneadmin at ubuntuOpNeb:~$ bash -x /var/lib/one/remotes/
> >> >>> >> /var/lib/one/remotes/: /var/lib/one/remotes/: es un directorio
> >> >>> >> This directory contains:
> >> >>> >> oneadmin at ubuntuOpNeb:~$ ls /var/lib/one/remotes/
> >> >>> >> auth datastore hooks im scripts_common.rb scripts_common.sh
> >> >>> >> tm
> >> >>> >> vmm
> >> >>> >> vnm
> >> >>> >> -------------- next part --------------
> >> >>> >> An HTML attachment was scrubbed...
> >> >>> >> URL:
> >> >>> >>
> >> >>> >>
> >> >>> >> <
> http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20131111/5c1feeee/attachment-0001.htm
> >
> >> >>> >>
> >> >>> >> ------------------------------
> >> >>> >>
> >> >>> >> Message: 2
> >> >>> >> Date: Mon, 11 Nov 2013 17:58:35 +0100
> >> >>> >>
> >> >>> >> From: Tino Vazquez <cvazquez at c12g.com>
> >> >>> >> To: Catalina Quinde <catalinaquinde at gmail.com>
> >> >>> >> Cc: users <Users at lists.opennebula.org>
> >> >>> >> Subject: Re: [one-users] VM in Opennebula for Esxi 5.1 failed
> >> >>> >> Message-ID:
> >> >>> >>
> >> >>> >>
> >> >>> >> <
> CAHfKwc21-kkPabWgtNwQs07EbbAiC9b8zzFJwMsRt3EXb0umSg at mail.gmail.com>
> >> >>> >> Content-Type: text/plain; charset=ISO-8859-1
> >> >>> >>
> >> >>> >> Hi,
> >> >>> >>
> >> >>> >> The following should executed in the same line:
> >> >>> >>
> >> >>> >> ----8<-----
> >> >>> >> $ bash -x /var/lib/one/remotes/datastore/vmfs/monitor
> >> >>> >>
> >> >>> >>
> >> >>> >>
> >> >>> >>
> PERTX0RSSVZFUl9BQ1RJT05fREFUQT48REFUQVNUT1JFPjxJRD4xMDM8L0lEPjxVSUQ+MDwvVUlEPjxHSUQ+MDwvR0lEPjxVTkFNRT5vbmVhZG1pbjwvVU5BTUU+PEdOQU1FPm9uZWFkbWluPC9HTkFNRT48TkFNRT5zc2hfZGlFc3hpPC9OQU1FPjxQRVJNSVNTSU9OUz48T1dORVJfVT4xPC9PV05FUl9VPjxPV05FUl9NPjE8L09XTkVSX00+PE9XTkVSX0E+MDwvT1dORVJfQT48R1JPVVBfVT4xPC9HUk9VUF9VPjxHUk9VUF9NPjA8L0dST1VQX00+PEdST1VQX0E+MDwvR1JPVVBfQT48T1RIRVJfVT4wPC9PVEhFUl9VPjxPVEhFUl9NPjA8L09USEVSX00+PE9USEVSX0E+MDwvT1RIRVJfQT48L1BFUk1JU1NJT05TPjxEU19NQUQ+dm1mczwvRFNfTUFEPjxUTV9NQUQ+dm1mczwvVE1fTUFEPjxCQVNFX1BBVEg+L3ZtZnMvdm9sdW1lcy8xMDM8L0JBU0VfUEFUSD48VFlQRT4wPC9UWVBFPjxESVNLX1RZUEU+MDwvRElTS19UWVBFPjxDTFVTVEVSX0lEPjEwMDwvQ0xVU1RFUl9JRD48Q0xVU1RFUj5Fc3hpY2x1czwvQ0xVU1RFUj48VE9UQUxfTUI+MDwvVE9UQUxfTUI+PEZSRUVfTUI+MDwvRlJFRV9NQj48VVNFRF9NQj4wPC9VU0VEX01CPjxJTUFHRVM+PC9JTUFHRVM+PFRFTVBMQVRFPjxCUklER0VfTElTVD48IVtDREFUQVsxOTIuMTY4LjE0Ny4xMzFdXT48L0JSSURHRV9MSVNUPjxEU19NQUQ+PCFbQ0RBVEFbdm1mc11dPjwvRFNfTUFEPjxUTV9NQUQ+PCFbQ0RBVEFbdm1mc11dPjwvVE1fTUFEPjxUWVBF
> Pjw
> >> hW0N
> >> >>> EQV
> >> >>> >>
> >> >>> >>
> >> >>> >>
> >> >>> >>
> RBW0lNQUdFX0RTXV0+PC9UWVBFPjwvVEVNUExBVEU+PC9EQVRBU1RPUkU+PC9EU19EUklWRVJfQUNUSU9OX0RBVEE+
> >> >>> >> 103
> >> >>> >> --->8-----
> >> >>> >>
> >> >>> >> Regards,
> >> >>> >>
> >> >>> >> -T
> >> >>> >> --
> >> >>> >> OpenNebula - Flexible Enterprise Cloud Made Simple
> >> >>> >>
> >> >>> >> --
> >> >>> >> Constantino V?zquez Blanco, PhD, MSc
> >> >>> >> Senior Infrastructure Architect at C12G Labs
> >> >>> >> www.c12g.com | @C12G | es.linkedin.com/in/tinova
> >> >>> >>
> >> >>> >> --
> >> >>> >> Confidentiality Warning: The information contained in this e-mail
> >> >>> >> and
> >> >>> >> any accompanying documents, unless otherwise expressly indicated,
> >> >>> >> is
> >> >>> >> confidential and privileged, and is intended solely for the
> person
> >> >>> >> and/or entity to whom it is addressed (i.e. those identified in
> the
> >> >>> >> "To" and "cc" box). They are the property of C12G Labs S.L..
> >> >>> >> Unauthorized distribution, review, use, disclosure, or copying of
> >> >>> >> this
> >> >>> >> communication, or any part thereof, is strictly prohibited and
> may
> >> >>> >> be
> >> >>> >> unlawful. If you have received this e-mail in error, please
> notify
> >> >>> >> us
> >> >>> >> immediately by e-mail at abuse at c12g.com and delete the e-mail
> and
> >> >>> >> attachments and any copy from your system. C12G thanks you for
> your
> >> >>> >> cooperation.
> >> >>> >>
> >> >>> >>
> >> >>> >> On Mon, Nov 11, 2013 at 5:50 PM, Catalina Quinde
> >> >>> >> <catalinaquinde at gmail.com> wrote:
> >> >>> >> > Hi Tino,
> >> >>> >> >
> >> >>> >> > The comand bash -x /var/lib/one/remotes can't execution because
> >> >>> >> > this
> >> >>> >> > is
> >> >>> >> > directory:
> >> >>> >> >
> >> >>> >> > oneadmin at ubuntuOpNeb:~$ bash -x /var/lib/one/remotes/
> >> >>> >> > /var/lib/one/remotes/: /var/lib/one/remotes/: es un directorio
> >> >>> >> >
> >> >>> >> > This directory contains:
> >> >>> >> >
> >> >>> >> > oneadmin at ubuntuOpNeb:~$ ls /var/lib/one/remotes/
> >> >>> >> > auth datastore hooks im scripts_common.rb
> scripts_common.sh
> >> >>> >> > tm
> >> >>> >> > vmm
> >> >>> >> > vnm
> >> >>> >> >
> >> >>> >> > Regards, Caty.
> >> >>> >> >
> >> >>> >> > 2013/11/11 Tino Vazquez <cvazquez at c12g.com>
> >> >>> >> >>
> >> >>> >> >> Hi,
> >> >>> >> >>
> >> >>> >> >> The setup looks correct, both DS 102 and 103 have the correct
> >> >>> >> >> BASE_PATH. About the monitoring error, could you send the
> output
> >> >>> >> >> of
> >> >>> >> >> the execution of the following as oneadmin in the front-end:
> >> >>> >> >>
> >> >>> >> >> $ bash -x /var/lib/one/remotes/
> >> >>> >> >> datastore/vmfs/monitor
> >> >>> >> >> PERTX0RSSVZFUl9BQ1RJT05fREFUQT48REFUQVNUT1JFPjxJRD4xMDM8L
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> 0lEPjxVSUQ+MDwvVUlEPjxHSUQ+MDwvR0lEPjxVTkFNRT5vbmVhZG1pbjwvVU5BTUU+PEdOQU1FPm9uZ
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> WFkbWluPC9HTkFNRT48TkFNRT5zc2hfZGlFc3hpPC9OQU1FPjxQRVJNSVNTSU9OUz48T1dORVJfVT4xP
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> C9PV05FUl9VPjxPV05FUl9NPjE8L09XTkVSX00+PE9XTkVSX0E+MDwvT1dORVJfQT48R1JPVVBfVT4xP
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> C9HUk9VUF9VPjxHUk9VUF9NPjA8L0dST1VQX00+PEdST1VQX0E+MDwvR1JPVVBfQT48T1RIRVJfVT4wP
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> C9PVEhFUl9VPjxPVEhFUl9NPjA8L09USEVSX00+PE9USEVSX0E+MDwvT1RIRVJfQT48L1BFUk1JU1NJT
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> 05TPjxEU19NQUQ+dm1mczwvRFNfTUFEPjxUTV9NQUQ+dm1mczwvVE1fTUFEPjxCQVNFX1BBVEg+L3ZtZ
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> nMvdm9sdW1lcy8xMDM8L0JBU0VfUEFUSD48VFlQRT4wPC9UWVBFPjxESVNLX1RZUEU+MDwvRElTS19UW
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> VBFPjxDTFVTVEVSX0lEPjEwMDwvQ0xVU1RFUl9JRD48Q0xVU1RFUj5Fc3hpY2x1czwvQ0xVU1RFUj48V
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> E9UQUxfTUI+MDwvVE9UQUxfTUI+PEZSRUVfTUI+MDwvRlJFRV9NQj48VVNFRF9NQj4wPC9VU0VEX01CP
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> jxJTUFHRVM+PC9JTUFHRVM+PFRFTVBMQVRFPjxCUklER0VfTElTVD48IVtDREFUQVsxOTIuMTY4LjE0N
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> y4xMzFdXT48L0JSSURHRV9MSVNUPjxEU19NQUQ+PCFbQ0RBVEFbdm1mc11dPjwvRFNfTUFEPjxUTV9NQ
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >>
> UQ+PCFbQ0RBVEFbdm1mc11dPjwvVE1fTUFEPjxUWVBFPjwhW0NEQVRBW0lNQUdFX0RTXV0+PC9UWVBFP
> >> >>> >> >>
> jwvVEVNUExBVEU+PC9EQVRBU1RPUkU+PC9EU19EUklWRVJfQUNUSU9OX0RBVEE+
> >> >>> >> >> 103
> >> >>> >> >>
> >> >>> >> >> Regards,
> >> >>> >> >>
> >> >>> >> >> -Tino
> >> >>> >> >> --
> >> >>> >> >> OpenNebula - Flexible Enterprise Cloud Made Simple
> >> >>> >> >>
> >> >>> >> >> --
> >> >>> >> >> Constantino V?zquez Blanco, PhD, MSc
> >> >>> >> >> Senior Infrastructure Architect at C12G Labs
> >> >>> >> >> www.c12g.com | @C12G | es.linkedin.com/in/tinova
> >> >>> >> >>
> >> >>> >> >> --
> >> >>> >> >> Confidentiality Warning: The information contained in this
> >> >>> >> >> e-mail
> >> >>> >> >> and
> >> >>> >> >> any accompanying documents, unless otherwise expressly
> >> >>> >> >> indicated, is
> >> >>> >> >> confidential and privileged, and is intended solely for the
> >> >>> >> >> person
> >> >>> >> >> and/or entity to whom it is addressed (i.e. those identified
> in
> >> >>> >> >> the
> >> >>> >> >> "To" and "cc" box). They are the property of C12G Labs S.L..
> >> >>> >> >> Unauthorized distribution, review, use, disclosure, or copying
> >> >>> >> >> of
> >> >>> >> >> this
> >> >>> >> >> communication, or any part thereof, is strictly prohibited and
> >> >>> >> >> may
> >> >>> >> >> be
> >> >>> >> >> unlawful. If you have received this e-mail in error, please
> >> >>> >> >> notify
> >> >>> >> >> us
> >> >>> >> >> immediately by e-mail at abuse at c12g.com and delete the e-mail
> >> >>> >> >> and
> >> >>> >> >> attachments and any copy from your system. C12G thanks you for
> >> >>> >> >> your
> >> >>> >> >> cooperation.
> >> >>> >> >>
> >> >>> >> >>
> >> >>> >> >> On Mon, Nov 11, 2013 at 4:25 PM, Catalina Quinde
> >> >>> >> >> <catalinaquinde at gmail.com> wrote:
> >> >>> >> >> > Hi friends,
> >> >>> >> >> >
> >> >>> >> >> > The result for command "onedatastore show' are:
> >> >>> >> >> >
> >> >>> >> >> > 1. For datastore system
> >> >>> >> >> >
> >> >>> >> >> > oneadmin at ubuntuOpNeb:~$ onedatastore show 102
> >> >>> >> >> > DATASTORE 102 INFORMATION
> >> >>> >> >> > ID : 102
> >> >>> >> >> > NAME : ssh_dsEsxi
> >> >>> >> >> > USER : oneadmin
> >> >>> >> >> > GROUP : oneadmin
> >> >>> >> >> > CLUSTER : Esxiclus
> >> >>> >> >> > TYPE : SYSTEM
> >> >>> >> >> > DS_MAD : -
> >> >>> >> >> > TM_MAD : vmfs
> >> >>> >> >> > BASE PATH : /vmfs/volumes/102
> >> >>> >> >> > DISK_TYPE : FILE
> >> >>> >> >> >
> >> >>> >> >> > DATASTORE CAPACITY
> >> >>> >> >> > TOTAL: : -
> >> >>> >> >> > USED: : -
> >> >>> >> >> > FREE: : -
> >> >>> >> >> >
> >> >>> >> >> > PERMISSIONS
> >> >>> >> >> > OWNER : um-
> >> >>> >> >> > GROUP : u--
> >> >>> >> >> > OTHER : ---
> >> >>> >> >> >
> >> >>> >> >> > DATASTORE TEMPLATE
> >> >>> >> >> > BRIDGE_LIST="192.168.147.131"
> >> >>> >> >> > TM_MAD="vmfs"
> >> >>> >> >> > TYPE="SYSTEM_DS"
> >> >>> >> >> >
> >> >>> >> >> > IMAGES
> >> >>> >> >> >
> >> >>> >> >> > 2. For datastore image
> >> >>> >> >> >
> >> >>> >> >> > oneadmin at ubuntuOpNeb:~$ onedatastore show 103
> >> >>> >> >> > DATASTORE 103 INFORMATION
> >> >>> >> >> > ID : 103
> >> >>> >> >> > NAME : ssh_diEsxi
> >> >>> >> >> > USER : oneadmin
> >> >>> >> >> > GROUP : oneadmin
> >> >>> >> >> > CLUSTER : Esxiclus
> >> >>> >> >> > TYPE : IMAGE
> >> >>> >> >> > DS_MAD : vmfs
> >> >>> >> >> > TM_MAD : vmfs
> >> >>> >> >> > BASE PATH : /vmfs/volumes/103
> >> >>> >> >> > DISK_TYPE : FILE
> >> >>> >> >> >
> >> >>> >> >> > DATASTORE CAPACITY
> >> >>> >> >> > TOTAL: : 0M
> >> >>> >> >> > USED: : 0M
> >> >>> >> >> > FREE: : 0M
> >> >>> >> >> >
> >> >>> >> >> > PERMISSIONS
> >> >>> >> >> > OWNER : um-
> >> >>> >> >> > GROUP : u--
> >> >>> >> >> > OTHER : ---
> >> >>> >> >> >
> >> >>> >> >> > DATASTORE TEMPLATE
> >> >>> >> >> > BRIDGE_LIST="192.168.147.131"
> >> >>> >> >> > DS_MAD="vmfs"
> >> >>> >> >> > TM_MAD="vmfs"
> >> >>> >> >> > TYPE="IMAGE_DS"
> >> >>> >> >> >
> >> >>> >> >> > IMAGES
> >> >>> >> >> >
> >> >>> >> >> > 3. In oned.log file show:
> >> >>> >> >> >
> >> >>> >> >> > Mon Nov 11 09:46:38 2013 [ImM][I]: Command execution fail:
> >> >>> >> >> > /var/lib/one/remotes/
> >> >>> >> >> > datastore/vmfs/monitor
> >> >>> >> >> > PERTX0RSSVZFUl9BQ1RJT05fREFUQT48REFUQVNUT1JFPjxJRD4xMDM8L
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> 0lEPjxVSUQ+MDwvVUlEPjxHSUQ+MDwvR0lEPjxVTkFNRT5vbmVhZG1pbjwvVU5BTUU+PEdOQU1FPm9uZ
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> WFkbWluPC9HTkFNRT48TkFNRT5zc2hfZGlFc3hpPC9OQU1FPjxQRVJNSVNTSU9OUz48T1dORVJfVT4xP
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> C9PV05FUl9VPjxPV05FUl9NPjE8L09XTkVSX00+PE9XTkVSX0E+MDwvT1dORVJfQT48R1JPVVBfVT4xP
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> C9HUk9VUF9VPjxHUk9VUF9NPjA8L0dST1VQX00+PEdST1VQX0E+MDwvR1JPVVBfQT48T1RIRVJfVT4wP
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> C9PVEhFUl9VPjxPVEhFUl9NPjA8L09USEVSX00+PE9USEVSX0E+MDwvT1RIRVJfQT48L1BFUk1JU1NJT
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> 05TPjxEU19NQUQ+dm1mczwvRFNfTUFEPjxUTV9NQUQ+dm1mczwvVE1fTUFEPjxCQVNFX1BBVEg+L3ZtZ
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> nMvdm9sdW1lcy8xMDM8L0JBU0VfUEFUSD48VFlQRT4wPC9UWVBFPjxESVNLX1RZUEU+MDwvRElTS19UW
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> VBFPjxDTFVTVEVSX0lEPjEwMDwvQ0xVU1RFUl9JRD48Q0xVU1RFUj5Fc3hpY2x1czwvQ0xVU1RFUj48V
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> E9UQUxfTUI+MDwvVE9UQUxfTUI+PEZSRUVfTUI+MDwvRlJFRV9NQj48VVNFRF9NQj4wPC9VU0VEX01CP
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> jxJTUFHRVM+PC9JTUFHRVM+PFRFTVBMQVRFPjxCUklER0VfTElTVD48IVtDREFUQVsxOTIuMTY4LjE0N
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> y4xMzFdXT48L0JSSURHRV9MSVNUPjxEU19NQUQ+PCFbQ0RBVEFbdm1mc11dPjwvRFNfTUFEPjxUTV9NQ
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> UQ+PCFbQ0RBVEFbdm1mc11dPjwvVE1fTUFEPjxUWVBFPjwhW0NEQVRBW0lNQUdFX0RTXV0+PC9UWVBFP
> >> >>> >> >> >
> >> >>> >> >> >
> jwvVEVNUExBVEU+PC9EQVRBU1RPUkU+PC9EU19EUklWRVJfQUNUSU9OX0RBVEE+
> >> >>> >> >> > 103
> >> >>> >> >> > Mon Nov 11 09:46:38 2013 [ImM][I]: ExitCode: 255
> >> >>> >> >> > Mon Nov 11 09:46:38 2013 [ImM][E]: Error monitoring
> datastore
> >> >>> >> >> > 103:
> >> >>> >> >> > -
> >> >>> >> >> >
> >> >>> >> >> > 4. Sending oned.log file attachment, inside this check nodes
> >> >>> >> >> > monitoring
> >> >>> >> >> > errors is because I have only Esxi node running at this tame
> >> >>> >> >> > others
> >> >>> >> >> > nodes
> >> >>> >> >> > are turned off.
> >> >>> >> >> >
> >> >>> >> >> > Regards, Caty.
> >> >>> >> >> >
> >> >>> >> >> > 2013/11/11 <users-request at lists.opennebula.org>
> >> >>> >> >> >>
> >> >>> >> >> >> Send Users mailing list submissions to
> >> >>> >> >> >> users at lists.opennebula.org
> >> >>> >> >> >>
> >> >>> >> >> >> To subscribe or unsubscribe via the World Wide Web, visit
> >> >>> >> >> >>
> >> >>> >> >> >>
> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
> >> >>> >> >> >> or, via email, send a message with subject or body 'help'
> to
> >> >>> >> >> >> users-request at lists.opennebula.org
> >> >>> >> >> >>
> >> >>> >> >> >> You can reach the person managing the list at
> >> >>> >> >> >> users-owner at lists.opennebula.org
> >> >>> >> >> >>
> >> >>> >> >> >> When replying, please edit your Subject line so it is more
> >> >>> >> >> >> specific
> >> >>> >> >> >> than "Re: Contents of Users digest..."
> >> >>> >> >> >>
> >> >>> >> >> >>
> >> >>> >> >> >> Today's Topics:
> >> >>> >> >> >>
> >> >>> >> >> >> 1. Re: VM in Opennebula for Esxi 5.1 failed (Tino
> Vazquez)
> >> >>> >> >> >> 2. Re: VM in Opennebula for Esxi 5.1 failed (Tino
> Vazquez)
> >> >>> >> >> >> 3. Re: Problem with oZones. Error 401 while trying to
> >> >>> >> >> >> access a
> >> >>> >> >> >> zone (Tino Vazquez)
> >> >>> >> >> >>
> >> >>> >> >> >>
> >> >>> >> >> >>
> >> >>> >> >> >>
> >> >>> >> >> >>
> >> >>> >> >> >>
> ----------------------------------------------------------------------
> >> >>> >> >> >>
> >> >>> >> >> >> Message: 1
> >> >>> >> >> >> Date: Mon, 11 Nov 2013 11:23:35 +0100
> >> >>> >> >> >> From: Tino Vazquez <cvazquez at c12g.com>
> >> >>> >> >> >> To: Catalina Quinde <catalinaquinde at gmail.com>
> >> >>> >> >> >> Cc: users <users at lists.opennebula.org>
> >> >>> >> >> >> Subject: Re: [one-users] VM in Opennebula for Esxi 5.1
> failed
> >> >>> >> >> >> Message-ID:
> >> >>> >> >> >>
> >> >>> >> >> >>
> >> >>> >> >> >>
> >> >>> >> >> >> <
> CAHfKwc0uhtMvDkkd0bDvVoDMAeXhC8x+7MMd0apE9Ow+47t4Zg at mail.gmail.com>
> >> >>> >> >> >> Content-Type: text/plain; charset=windows-1252
> >> >>> >> >> >>
> >> >>> >> >> >> Hi Catalina,
> >> >>> >> >> >>
> >> >>> >> >> >> Let's focus first on the 'vmfs' datastore not being
> correctly
> >> >>> >> >> >> monitored. Could you send us the output of "onedatastore
> show
> >> >>> >> >> >> <ds_id>"
> >> >>> >> >> >> for both the system and the images datastore.
> >> >>> >> >> >>
> >> >>> >> >> >> Also, is there any monitor errors in /var/log/one/oned.log?
> >> >>> >> >> >> If
> >> >>> >> >> >> cannot
> >> >>> >> >> >> find the relevant section in the log file, please send it
> >> >>> >> >> >> through
> >> >>> >> >> >> for
> >> >>> >> >> >> analysis.
> >> >>> >> >> >>
> >> >>> >> >> >> Best regards,
> >> >>> >> >> >>
> >> >>> >> >> >>
> >> >>> >> >> >> -Tino
> >> >>> >> >> >>
> >> >>> >> >> >> --
> >> >>> >> >> >> OpenNebula - Flexible Enterprise Cloud Made Simple
> >> >>> >> >> >>
> >> >>> >> >> >> --
> >> >>> >> >> >> Constantino V?zquez Blanco, PhD, MSc
> >> >>> >> >> >>
> >> >>> >> >> >> Senior Infrastructure Architect at C12G Labs
> >> >>> >> >> >> www.c12g.com | @C12G | es.linkedin.com/in/tinova
> >> >>> >> >> >>
> >> >>> >> >> >> --
> >> >>> >> >> >> Confidentiality Warning: The information contained in this
> >> >>> >> >> >> e-mail
> >> >>> >> >> >> and
> >> >>> >> >> >> any accompanying documents, unless otherwise expressly
> >> >>> >> >> >> indicated,
> >> >>> >> >> >> is
> >> >>> >> >> >> confidential and privileged, and is intended solely for the
> >> >>> >> >> >> person
> >> >>> >> >> >> and/or entity to whom it is addressed (i.e. those
> identified
> >> >>> >> >> >> in
> >> >>> >> >> >> the
> >> >>> >> >> >> "To" and "cc" box). They are the property of C12G Labs
> S.L..
> >> >>> >> >> >> Unauthorized distribution, review, use, disclosure, or
> >> >>> >> >> >> copying of
> >> >>> >> >> >> this
> >> >>> >> >> >> communication, or any part thereof, is strictly prohibited
> >> >>> >> >> >> and
> >> >>> >> >> >> may
> >> >>> >> >> >> be
> >> >>> >> >> >> unlawful. If you have received this e-mail in error, please
> >> >>> >> >> >> notify
> >> >>> >> >> >> us
> >> >>> >> >> >> immediately by e-mail at abuse at c12g.com and delete the
> e-mail
> >> >>> >> >> >> and
> >> >>> >> >> >> attachments and any copy from your system. C12G thanks you
> >> >>> >> >> >> for
> >> >>> >> >> >> your
> >> >>> >> >> >> cooperation.
> >> >>> >> >> >>
> >> >>> >> >> >>
> >> >>> >> >> >> On Mon, Nov 11, 2013 at 2:17 AM, Catalina Quinde
> >> >>> >> >> >> <catalinaquinde at gmail.com> wrote:
> >> >>> >> >> >> >
> >> >>> >> >> >> > Hi Daniel,
> >> >>> >> >> >> >
> >> >>> >> >> >> > Thanks for reply,
> >> >>> >> >> >> >
> >> >>> >> >> >> > 1. 1. I'm using Opennebula 4.2 and node Esxi
> version
> >> >>> >> >> >> > 5.1.
> >> >>> >> >> >> >
> >> >>> >> >> >> > 2. I 2. I have used the following links:
> >> >>> >> >> >> > http://opennebula.org/documentation:rel4.2:cluster_guide
> >> >>> >> >> >> >
> >> >>> >> >> >> > http://opennebula.org/documentation:rel4.2:vmware_ds
> >> >>> >> >> >> >
> >> >>> >> >> >> >
> >> >>> >> >> >> >
> >> >>> >> >> >> >
> >> >>> >> >> >> >
> >> >>> >> >> >> >
> >> >>> >> >> >> >
> http://opennebula.org/documentation:rel4.2:system_ds#the_system_datastore_for_multi-cluster_setups
> >> >>> >> >> >> > and responses in mail lists.
> >> >>> >> >> >> >
> >> >>> >> >> >> > 33. I 3. I have enabled ssh between Opennebula and Esxi
> >> >>> >> >> >> > to
> >> >>> >> >> >> > use
> >> >>> >> >> >> > no
> >> >>> >> >> >> > password
> >> >>> >> >> >> > correctly.
> >> >>> >> >> >> >
> >> >>> >> >> >> > 4. 4. According to documentation should I put the
> >> >>> >> >> >> > Esxi
> >> >>> >> >> >> > node
> >> >>> >> >> >> > inside
> >> >>> >> >> >> > the
> >> >>> >> >> >> > cluster, as Opennebula is working with several
> hypervisors,
> >> >>> >> >> >> > has
> >> >>> >> >> >> > been
> >> >>> >> >> >> > used
> >> >>> >> >> >> > the command to create the cluster: ?onecluster create
> >> >>> >> >> >> > [namecluster]?.
> >> >>> >> >> >> >
> >> >>> >> >> >> > 5. 5. I added the node Esxi to this cluster with
> the
> >> >>> >> >> >> > command:
> >> >>> >> >> >> > ?onecluster addhost [namecluster] [namenodo]?.
> >> >>> >> >> >> >
> >> >>> >> >> >> > 6. 6. I added to the cluster, virtual network
> created
> >> >>> >> >> >> > for
> >> >>> >> >> >> > Esxi,
> >> >>> >> >> >> > which
> >> >>> >> >> >> > is also created on the Esxi node through Vsphere Client,
> >> >>> >> >> >> > with
> >> >>> >> >> >> > the
> >> >>> >> >> >> > command:?onecluster addvnet [namecluster]
> [namevirtualred]?
> >> >>> >> >> >> >
> >> >>> >> >> >> > 7. 7. I updated the cluster using the command:
> >> >>> >> >> >> > ?onecluster
> >> >>> >> >> >> > update
> >> >>> >> >> >> > [namecluster]?, to add: DATASTORE_LOCATION, which will
> >> >>> >> >> >> > affect
> >> >>> >> >> >> > only
> >> >>> >> >> >> > that
> >> >>> >> >> >> > node, by placing the following:
> >> >>> >> >> >> > DATASTORE_LOCATION=/vmfs/volumes
> >> >>> >> >> >> >
> >> >>> >> >> >> > 8. 8. I have created two files that serve as image
> to
> >> >>> >> >> >> > create
> >> >>> >> >> >> > the
> >> >>> >> >> >> > datastores:
> >> >>> >> >> >> >
> >> >>> >> >> >> > a. The image file for the datastore system
> contains:
> >> >>> >> >> >> >
> >> >>> >> >> >> > NAME=dsEsxi
> >> >>> >> >> >> >
> >> >>> >> >> >> > TM_MAD=vmfs
> >> >>> >> >> >> >
> >> >>> >> >> >> > TYPE=SYSTEM_DS
> >> >>> >> >> >> >
> >> >>> >> >> >> > BRIDGE_LIST="192.168.147.131"
> >> >>> >> >> >> >
> >> >>> >> >> >> >
> >> >>> >> >> >> >
> >> >>> >> >> >> > b. This datastore is linked to the cluster at the
> same
> >> >>> >> >> >> > time
> >> >>> >> >> >> > created
> >> >>> >> >> >> > with the command: ?onedatastore create -c [namecluster]
> >> >>> >> >> >> > /var/lib/images/system_esxi.ds?.
> >> >>> >> >> >> >
> >> >>> >> >> >> >
> >> >>> >> >> >> >
> >> >>> >> >> >> > c. The image file for the datastore image contains:
> >> >>> >> >> >> >
> >> >>> >> >> >> >
> >> >>> >> >> >> >
> >> >>> >> >> >> > NAME=diEsxi
> >> >>> >> >> >> >
> >> >>> >> >> >> > DS_MAD=vmfs
> >> >>> >> >> >> >
> >> >>> >> >> >> > TM_MAD=vmfs
> >> >>> >> >> >> >
> >> >>> >> >> >> > TYPE=IMAGE_DS
> >> >>> >> >> >> >
> >> >>> >> >> >> > BRIDGE_LIST="192.168.147.131"
> >> >>> >> >> >> >
> >> >>> >> >> >> > d. This datastore is linked to the cluster at the
> same
> >> >>> >> >> >> > time
> >> >>> >> >> >> > created
> >> >>> >> >> >> > with the commando:
> >> >>> >> >> >> >
> >> >>> >> >> >> > ?onedatastore create ?c [namecluster]
> >> >>> >> >> >> > /var/lib/images/image_esxi.ds?
> >> >>> >> >> >> >
> >> >>> >> >> >> >
> >> >>> >> >> >> >
> >> >>> >> >> >> > 9. 9. When I list the datastores, you can see that
> >> >>> >> >> >> > the
> >> >>> >> >> >> > image
> >> >>> >> >> >> > datastore
> >> >>> >> >> >> > new created has 0M capacity.
> >> >>> >> >> >> >
> >> >>> >> >> >> > I've done all this procedure since according to the
> >> >>> >> >> >> > documentation
> >> >>> >> >> >> > followed
> >> >>> >> >> >> > at Opennebula 4.2, it changes how to use Esxi node.
> >> >>> >> >> >> >
> >> >>> >> >> >> >
> >> >>> >> >> >> > Before all of the above to deploy a VM this error
> occurred:
> >> >>> >> >> >>
> >> >>> >> >> >> >
> >> >>> >> >> >> > oneadmin at ubuntuOpNeb:~$ cat /var/log/one/36.log
> >> >>> >> >> >> >
> >> >>> >> >> >> > Thu Oct 31 11:18:02 2013 [DiM][I]: New VM state is
> ACTIVE.
> >> >>> >> >> >> >
> >> >>> >> >> >> > Thu Oct 31 11:18:02 2013 [LCM][I]: New VM state is
> PROLOG.
> >> >>> >> >> >> >
> >> >>> >> >> >> > Thu Oct 31 11:18:03 2013 [TM][I]: Command execution fail:
> >> >>> >> >> >> >
> >> >>> >> >> >> > /var/lib/one/remotes/tm/shared/clone
> >> >>> >> >> >> > ubuntuOpNeb:/var/lib/one/datastores/1/
> >> >>> >> >> >> >
> >> >>> >> >> >> > 02e8c67d4f59826e9fb12ccb48f77557
> >> >>> >> >> >> > demos:/var/lib/one/datastores/0/36/disk.0
> >> >>> >> >> >>
> >> >>> >> >> >> >
> >> >>> >> >> >> > 36 1
> >> >>> >> >> >> >
> >> >>> >> >> >> > Thu Oct 31 11:18:03 2013 [TM][I]: clone: Cloning
> >> >>> >> >> >> > /var/lib/one/datastores/1/
> >> >>> >> >> >> >
> >> >>> >> >> >> > 02e8c67d4f59826e9fb12ccb48f77557 in
> >> >>> >> >> >> > demos:/var/lib/one/datastores/
> >> >>> >> >> >> >
> >> >>> >> >> >> > 0/36/disk.0
> >> >>> >> >> >> >
> >> >>> >> >> >> > Thu Oct 31 11:18:03 2013 [TM][E]: clone: Command "cd
> >> >>> >> >> >> >
> >> >>> >> >> >> > /var/lib/one/datastores/0/36; cp
> /var/lib/one/datastores/1/
> >> >>> >> >> >> >
> >> >>> >> >> >> > 02e8c67d4f59826e9fb12ccb48f77557
> >> >>> >> >> >> > /var/lib/one/datastores/0/36/disk.0"
> >> >>> >> >> >>
> >> >>> >> >> >> >
> >> >>> >> >> >> > failed: cp: can't stat '/var/lib/one/datastores/1/
> >> >>> >> >> >> >
> >> >>> >> >> >> > 02e8c67d4f59826e9fb12ccb48f77557': No such file or
> >> >>> >> >> >> > directory
> >> >>> >> >> >> >
> >> >>> >> >> >> > Thu Oct 31 11:18:03 2013 [TM][E]: Error copying
> >> >>> >> >> >> > ubuntuOpNeb:/var/lib/one/
> >> >>> >> >> >> >
> >> >>> >> >> >> > datastores/1/02e8c67d4f59826e9fb12ccb48f77557 to
> >> >>> >> >> >>
> >> >>> >> >> >> >
> >> >>> >> >> >> > demos:/var/lib/one/datastores/0/36/disk.0
> >> >>> >> >> >> >
> >> >>> >> >> >> > Thu Oct 31 11:18:03 2013 [TM][I]: ExitCode: 1
> >> >>> >> >> >> >
> >> >>> >> >> >> > Thu Oct 31 11:18:03 2013 [TM][E]: Error executing image
> >> >>> >> >> >> > transfer
> >> >>> >> >> >> > script:
> >> >>> >> >> >> >
> >> >>> >> >> >> > Error copying ubuntuOpNeb:/var/lib/one/datastores/1/
> >> >>> >> >> >> >
> >> >>> >> >> >> > 02e8c67d4f59826e9fb12ccb48f77557 to
> >> >>> >> >> >> > demos:/var/lib/one/datastores/
> >> >>> >> >> >> >
> >> >>> >> >> >> > 0/36/disk.0
> >> >>> >> >> >> >
> >> >>> >> >> >> > Thu Oct 31 11:18:03 2013 [DiM][I]: New VM state is FAILED
> >> >>> >> >> >> >
> >> >>> >> >> >> >
> >> >>> >> >> >> >
> >> >>> >> >> >> > Now, I suppose that I've to create the image for
> opennebula
> >> >>> >> >> >> > in
> >> >>> >> >> >> > the
> >> >>> >> >> >> > new
> >> >>> >> >> >> > image
> >> >>> >> >> >> > datastore but I can?t do because it has no capacity.
> >> >>> >> >> >> >
> >> >>> >> >> >> > Please help me.
> >> >>> >> >> >> >
> >> >>> >> >> >> > Thanks, Caty
> >> >>> >> >> >> >
> >> >>> >> >> >> > 2013/11/10 <users-request at lists.opennebula.org>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> Send Users mailing list submissions to
> >> >>> >> >> >> >> users at lists.opennebula.org
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> To subscribe or unsubscribe via the World Wide Web,
> visit
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
> >> >>> >> >> >> >> or, via email, send a message with subject or body
> 'help'
> >> >>> >> >> >> >> to
> >> >>> >> >> >> >> users-request at lists.opennebula.org
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> You can reach the person managing the list at
> >> >>> >> >> >> >> users-owner at lists.opennebula.org
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> When replying, please edit your Subject line so it is
> more
> >> >>> >> >> >> >> specific
> >> >>> >> >> >> >> than "Re: Contents of Users digest..."
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> Today's Topics:
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> 1. VM in Opennebula for Esxi 5.1 failed (Catalina
> >> >>> >> >> >> >> Quinde)
> >> >>> >> >> >> >> 2. Re: VM in Opennebula for Esxi 5.1 failed (Daniel
> >> >>> >> >> >> >> Dehennin)
> >> >>> >> >> >> >> 3. ask to password when add ceph datastore
> >> >>> >> >> >> >> (12navidb2 at gmail.com)
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> ----------------------------------------------------------------------
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> Message: 1
> >> >>> >> >> >> >> Date: Sat, 9 Nov 2013 19:07:44 -0500
> >> >>> >> >> >> >> From: Catalina Quinde <catalinaquinde at gmail.com>
> >> >>> >> >> >> >> To: users at lists.opennebula.org
> >> >>> >> >> >> >> Subject: [one-users] VM in Opennebula for Esxi 5.1
> failed
> >> >>> >> >> >> >> Message-ID:
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> <CAPgz++yOE=CmekTkFjD=
> yCFo4uwN6oMYb+z+aYY7VtZ4rOoubw at mail.gmail.com>
> >> >>> >> >> >> >> Content-Type: text/plain; charset="iso-8859-1"
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> Please help me,I created an OpenNebula cluster in which
> I
> >> >>> >> >> >> >> have
> >> >>> >> >> >> >> added
> >> >>> >> >> >> >> the
> >> >>> >> >> >> >> host Esxi, I've also created two datastores, one for
> >> >>> >> >> >> >> system
> >> >>> >> >> >> >> and
> >> >>> >> >> >> >> one
> >> >>> >> >> >> >> for
> >> >>> >> >> >> >> images, with features:
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> ID 100 system TM_MAD = vmfs
> >> >>> >> >> >> >> ID 101 image DS_MAD = vmfs
> >> >>> >> >> >> >> TM_MAD = vmfs
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> These two datastores I have added to the cluster
> created,
> >> >>> >> >> >> >> the
> >> >>> >> >> >> >> comand
> >> >>> >> >> >> >> "onedatastore list" indicates CAPACITY datastore = 0M
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> And in the path "/ var / lib / one / datastores" here
> are
> >> >>> >> >> >> >> not
> >> >>> >> >> >> >> these
> >> >>> >> >> >> >> two
> >> >>> >> >> >> >> datastores as directories.
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> I'm using OpenNebula Esxi 4.2 and 5.1.
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> Greetings.
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> Caty.
> >> >>> >> >> >> >> -------------- next part --------------
> >> >>> >> >> >> >> An HTML attachment was scrubbed...
> >> >>> >> >> >> >> URL:
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> <
> http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20131109/556b453a/attachment.html
> >
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> ------------------------------
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> Message: 2
> >> >>> >> >> >> >> Date: Sun, 10 Nov 2013 01:47:35 +0100
> >> >>> >> >> >> >> From: Daniel Dehennin <daniel.dehennin at baby-gnu.org>
> >> >>> >> >> >> >> To: users at lists.opennebula.org
> >> >>> >> >> >> >> Subject: Re: [one-users] VM in Opennebula for Esxi 5.1
> >> >>> >> >> >> >> failed
> >> >>> >> >> >> >> Message-ID: <878uwx9j6g.fsf at hati.baby-gnu.org>
> >> >>> >> >> >> >> Content-Type: text/plain; charset="utf-8"
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> Catalina Quinde <catalinaquinde at gmail.com> writes:
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> First of all hello,
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> I do not have proprietary system so I'll only give you
> >> >>> >> >> >> >> information I
> >> >>> >> >> >> >> have.
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> > Please help me,I created an OpenNebula cluster in
> which
> >> >>> >> >> >> >> > I
> >> >>> >> >> >> >> > have
> >> >>> >> >> >> >> > added
> >> >>> >> >> >> >> > the
> >> >>> >> >> >> >> > host Esxi, I've also created two datastores, one for
> >> >>> >> >> >> >> > system
> >> >>> >> >> >> >> > and
> >> >>> >> >> >> >> > one
> >> >>> >> >> >> >> > for
> >> >>> >> >> >> >> > images, with features:
> >> >>> >> >> >> >> >
> >> >>> >> >> >> >> > ID 100 system TM_MAD = vmfs
> >> >>> >> >> >> >> > ID 101 image DS_MAD = vmfs
> >> >>> >> >> >> >> > TM_MAD = vmfs
> >> >>> >> >> >> >> >
> >> >>> >> >> >> >> > These two datastores I have added to the cluster
> >> >>> >> >> >> >> > created,
> >> >>> >> >> >> >> > the
> >> >>> >> >> >> >> > comand
> >> >>> >> >> >> >> > "onedatastore list" indicates CAPACITY datastore = 0M
> >> >>> >> >> >> >> >
> >> >>> >> >> >> >> > And in the path "/ var / lib / one / datastores" here
> >> >>> >> >> >> >> > are
> >> >>> >> >> >> >> > not
> >> >>> >> >> >> >> > these
> >> >>> >> >> >> >> > two
> >> >>> >> >> >> >> > datastores as directories.
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> Reading the documentation[1], I understand that:
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> 1. oneadmin must be able to SSH ESX servers without
> >> >>> >> >> >> >> password[2]
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> 2. nothing is under /var/lib/one/datastores of the
> >> >>> >> >> >> >> OpenNebula
> >> >>> >> >> >> >> frontend
> >> >>> >> >> >> >> because it's managed by ESX servers, ONE access to
> VMFS
> >> >>> >> >> >> >> datastores
> >> >>> >> >> >> >> though API
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> Maybe if you describe a little more your setup will help
> >> >>> >> >> >> >> people
> >> >>> >> >> >> >> helping
> >> >>> >> >> >> >> you ;-)
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> > I'm using OpenNebula Esxi 4.2 and 5.1.
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> I suppose you mean that you use:
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> - OpenNebula 4.2
> >> >>> >> >> >> >> - ESXi 5.1
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> Right?
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> Regards.
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> Footnotes:
> >> >>> >> >> >> >> [1]
> http://opennebula.org/documentation:rel4.2:vmware_ds
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> [2]
> >> >>> >> >> >> >>
> http://opennebula.org/documentation:rel4.2:hostsubsystem
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> --
> >> >>> >> >> >> >> Daniel Dehennin
> >> >>> >> >> >> >> R?cup?rer ma clef GPG:
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> gpg --keyserver pgp.mit.edu --recv-keys 0x7A6FE2DF
> >> >>> >> >> >> >> -------------- next part --------------
> >> >>> >> >> >> >> A non-text attachment was scrubbed...
> >> >>> >> >> >> >> Name: not available
> >> >>> >> >> >> >> Type: application/pgp-signature
> >> >>> >> >> >> >> Size: 229 bytes
> >> >>> >> >> >> >> Desc: not available
> >> >>> >> >> >> >> URL:
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> <
> http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20131110/580e83eb/attachment-0001.pgp
> >
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> ------------------------------
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> Message: 3
> >> >>> >> >> >> >> Date: Sun, 10 Nov 2013 13:26:27 +0330
> >> >>> >> >> >> >> From: "12navidb2 at gmail.com" <12navidb2 at gmail.com>
> >> >>> >> >> >> >> To: users at lists.opennebula.org
> >> >>> >> >> >> >> Subject: [one-users] ask to password when add ceph
> >> >>> >> >> >> >> datastore
> >> >>> >> >> >> >> Message-ID:
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> <CAK9QDg9znnHjkH=mLc19F=
> CTSd+Yo16arttCEg_erv5-x4WAtg at mail.gmail.com>
> >> >>> >> >> >> >> Content-Type: text/plain; charset="iso-8859-1"
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> hi all
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> when i add new ceph datastore, opennebula run a command
> >> >>> >> >> >> >> like
> >> >>> >> >> >> >> this
> >> >>> >> >> >> >> with
> >> >>> >> >> >> >> oneadmin user that needs password
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> oneadmin at one-server2:~$
> >> >>> >> >> >> >> /var/lib/one/remotes/datastore/ceph/monitor
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> 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
> DRE
> >> FUQV
> >> >>> svX
> >> >>> >> V0+PC9
> >> >>> >> >> >> TQU
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> ZFX0RJUlM+PFRNX01BRD48IVtDREFUQVtjZXBoXV0+PC9UTV9NQUQ+PC9URU1QTEFURT48L0RBVEFTVE9SRT48L0RTX0RSSVZFUl9BQ1RJT05fREFUQT4=
> >> >>> >> >> >> >> 113
> >> >>> >> >> >> >> oneadmin at one-server2's password:
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> because it, opennebula cant show datastore space and
> show
> >> >>> >> >> >> >> (0MB)
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> output this command is
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> USED_MB=3015
> >> >>> >> >> >> >> FREE_MB=1184747
> >> >>> >> >> >> >> TOTAL_MB=1193984
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> the point here is that i cant run this command with
> >> >>> >> >> >> >> oneadmin
> >> >>> >> >> >> >> user
> >> >>> >> >> >> >> !
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> sudo rados df
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> or even rados df (without sudo)
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> i add these lines to /etc/sudoers
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> oneadmin ALL=(ALL) NOPASSWD:
> >> >>> >> >> >> >> /usr/bin/rbd*,/usr/bin/rados*
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> best regards
> >> >>> >> >> >> >> -------------- next part --------------
> >> >>> >> >> >> >> An HTML attachment was scrubbed...
> >> >>> >> >> >> >> URL:
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> <
> http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20131110/64242fd6/attachment-0001.htm
> >
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> ------------------------------
> >> >>> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> _______________________________________________
> >> >>> >> >> >> >> Users mailing list
> >> >>> >> >> >> >> Users at lists.opennebula.org
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> End of Users Digest, Vol 69, Issue 26
> >> >>> >> >> >> >> *************************************
> >> >>> >> >> >>
> >> >>> >> >> >> >
> >> >>> >> >> >> >
> >> >>> >> >> >> >
> >> >>> >> >> >> > _______________________________________________
> >> >>> >> >> >> > Users mailing list
> >> >>> >> >> >> > Users at lists.opennebula.org
> >> >>> >> >> >> >
> >> >>> >> >> >> >
> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
> >> >>> >> >> >> >
> >> >>> >> >> >>
> >> >>> >> >> >>
> >> >>> >> >> >> ------------------------------
> >> >>> >> >> >>
> >> >>> >> >> >> Message: 2
> >> >>> >> >> >> Date: Mon, 11 Nov 2013 14:30:20 +0100
> >> >>> >> >> >> From: Tino Vazquez <cvazquez at c12g.com>
> >> >>> >> >> >> To: Catalina Quinde <catalinaquinde at gmail.com>
> >> >>> >> >> >> Cc: users <users at lists.opennebula.org>
> >> >>> >> >> >> Subject: Re: [one-users] VM in Opennebula for Esxi 5.1
> failed
> >> >>> >> >> >> Message-ID:
> >> >>> >> >> >>
> >> >>> >> >> >>
> >> >>> >> >> >>
> >> >>> >> >> >> <CAHfKwc05HTwsGJSxkW4fSoMu5O10=
> HuAUcS70pVCzh2d3zgxtA at mail.gmail.com>
> >> >>> >> >> >> Content-Type: text/plain; charset=ISO-8859-1
> >> >>> >> >> >>
> >> >>> >> >> >>
> >> >>> >> >> >> On Thu, Nov 7, 2013 at 5:55 AM, Catalina Quinde
> >> >>> >> >> >> <catalinaquinde at gmail.com> wrote:
> >> >>> >> >> >> > Thanks Tino,
> >> >>> >> >> >> >
> >> >>> >> >> >> > Excuse me for not responding earlier, I have read the
> >> >>> >> >> >> > documentation
> >> >>> >> >> >> > provided
> >> >>> >> >> >> > I do, but there is a section that is not clear in which
> >> >>> >> >> >> > states
> >> >>> >> >> >> > the
> >> >>> >> >> >> > following:
> >> >>> >> >> >> >
> >> >>> >> >> >> > "... In heterogeneous clouds (mix of ESX and other
> >> >>> >> >> >> > hypervisor
> >> >>> >> >> >> > hosts)
> >> >>> >> >> >> > put
> >> >>> >> >> >> > all
> >> >>> >> >> >> > the ESX hosts in clusters With The Following In Their
> >> >>> >> >> >> > template
> >> >>> >> >> >> > attribute
> >> >>> >> >> >> > (eg
> >> >>> >> >> >> > onecluster update) ...":
> >> >>> >> >> >> >
> >> >>> >> >> >> > DATASTORE_LOCATION = / vmfs / volumes
> >> >>> >> >> >> >
> >> >>> >> >> >> > In my case, opennebula works with 4 different
> hypervisors,
> >> >>> >> >> >> > and
> >> >>> >> >> >> > I
> >> >>> >> >> >> > don't
> >> >>> >> >> >> > have
> >> >>> >> >> >> > created clusters, nodes are registered directly in
> >> >>> >> >> >> > opennebula:
> >> >>> >> >> >> >
> >> >>> >> >> >> > 1. I make clusters for each hypervisor??
> >> >>> >> >> >>
> >> >>> >> >> >> You will need to create one at least for VMware in order to
> >> >>> >> >> >> set
> >> >>> >> >> >> the
> >> >>> >> >> >> DATASTORE_LOCATION in the cluster so the datastores can
> >> >>> >> >> >> inherit
> >> >>> >> >> >> it.
> >> >>> >> >> >> In
> >> >>> >> >> >> any case, it would be recommended to have one cluster per
> >> >>> >> >> >> hypervisor.
> >> >>> >> >> >>
> >> >>> >> >> >> > 2. In the image cluster file to create the cluster must
> >> >>> >> >> >> > point
> >> >>> >> >> >> > out
> >> >>> >> >> >> > the
> >> >>> >> >> >> > DATASTORE_LOCATION????
> >> >>> >> >> >>
> >> >>> >> >> >> Yes, the template used to create the cluster must include
> the
> >> >>> >> >> >> DATASTORE_LOCATION, although this can be updated later. In
> >> >>> >> >> >> any
> >> >>> >> >> >> case,
> >> >>> >> >> >> the DATASTORE_LOCATION _must_ be present before the
> datastore
> >> >>> >> >> >> is
> >> >>> >> >> >> created.
> >> >>> >> >> >>
> >> >>> >> >> >> >
> >> >>> >> >> >> > In my case I have created the datastores in "ESXi" with
> the
> >> >>> >> >> >> > frontend
> >> >>> >> >> >> > in
> >> >>> >> >> >> > "/
> >> >>> >> >> >> > var/lib/one/datastores/0" and "1", created by the "VMWare
> >> >>> >> >> >> > Client",
> >> >>> >> >> >> > in
> >> >>> >> >> >> > this
> >> >>> >> >> >> > datastores is created a virtual machine for Esxi. I must
> >> >>> >> >> >> > add
> >> >>> >> >> >> > the
> >> >>> >> >> >> > datastores
> >> >>> >> >> >> > "/ vmfs / volumes. .. "as additional datastores??
> >> >>> >> >> >>
> >> >>> >> >> >> In the ESX, only the system and one image datastore need to
> >> >>> >> >> >> be
> >> >>> >> >> >> register (and potentially, more than one image datastore).
> In
> >> >>> >> >> >> OpenNebula 4.2 they cannot be 0 and 1, since they are
> created
> >> >>> >> >> >> on
> >> >>> >> >> >> OpneNebula first boot and they won't have the proper
> >> >>> >> >> >> DATASTORE_LOCATION inherit.
> >> >>> >> >> >>
> >> >>> >> >> >> To check that all is good, the BASE_PATH of both the system
> >> >>> >> >> >> and
> >> >>> >> >> >> image
> >> >>> >> >> >> datstore for VMware should contain "/vmfs/volumes"
> >> >>> >> >> >>
> >> >>> >> >> >> Regards,
> >> >>> >> >> >>
> >> >>> >> >> >> -Tino
> >> >>> >> >> >>
> >> >>> >> >> >> >
> >> >>> >> >> >> > Thanks for responding
> >> >>> >> >> >> > Caty
> >> >>> >> >> >> >
> >> >>> >> >> >> >
> >> >>> >> >> >> > 2013/11/4 Tino Vazquez <cvazquez at c12g.com>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> Hi,
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> Ok, so then you need to create a VMFS datastore in order
> >> >>> >> >> >> >> to
> >> >>> >> >> >> >> register
> >> >>> >> >> >> >> VMDK images that can be used with VMware ESX. More info
> >> >>> >> >> >> >> here:
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> http://opennebula.org/documentation:rel4.2:vmware_ds
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> Regards,
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> -Tino
> >> >>> >> >> >> >> --
> >> >>> >> >> >> >> OpenNebula - Flexible Enterprise Cloud Made Simple
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> --
> >> >>> >> >> >> >> Constantino V?zquez Blanco, PhD, MSc
> >> >>> >> >> >>
> >> >>> >> >> >> >> Senior Infrastructure Architect at C12G Labs
> >> >>> >> >> >> >> www.c12g.com | @C12G | es.linkedin.com/in/tinova
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> --
> >> >>> >> >> >> >> Confidentiality Warning: The information contained in
> this
> >> >>> >> >> >> >> e-mail
> >> >>> >> >> >> >> and
> >> >>> >> >> >> >> any accompanying documents, unless otherwise expressly
> >> >>> >> >> >> >> indicated,
> >> >>> >> >> >> >> is
> >> >>> >> >> >> >> confidential and privileged, and is intended solely for
> >> >>> >> >> >> >> the
> >> >>> >> >> >> >> person
> >> >>> >> >> >> >> and/or entity to whom it is addressed (i.e. those
> >> >>> >> >> >> >> identified
> >> >>> >> >> >> >> in
> >> >>> >> >> >> >> the
> >> >>> >> >> >> >> "To" and "cc" box). They are the property of C12G Labs
> >> >>> >> >> >> >> S.L..
> >> >>> >> >> >> >> Unauthorized distribution, review, use, disclosure, or
> >> >>> >> >> >> >> copying
> >> >>> >> >> >> >> of
> >> >>> >> >> >> >> this
> >> >>> >> >> >> >> communication, or any part thereof, is strictly
> prohibited
> >> >>> >> >> >> >> and
> >> >>> >> >> >> >> may
> >> >>> >> >> >> >> be
> >> >>> >> >> >> >> unlawful. If you have received this e-mail in error,
> >> >>> >> >> >> >> please
> >> >>> >> >> >> >> notify
> >> >>> >> >> >> >> us
> >> >>> >> >> >> >> immediately by e-mail at abuse at c12g.com and delete the
> >> >>> >> >> >> >> e-mail
> >> >>> >> >> >> >> and
> >> >>> >> >> >> >> attachments and any copy from your system. C12G thanks
> you
> >> >>> >> >> >> >> for
> >> >>> >> >> >> >> your
> >> >>> >> >> >> >> cooperation.
> >> >>> >> >> >> >>
> >> >>> >> >> >> >>
> >> >>> >> >> >> >> On Mon, Nov 4, 2013 at 4:04 PM, Catalina Quinde
> >> >>> >> >> >> >> <catalinaquinde at gmail.com> wrote:
> >> >>> >> >> >> >> > Hi, Tino thanks for reply,
> >> >>> >> >> >> >> >
> >> >>> >> >> >> >> > In Opennebula-sunstone in the bottom, says
> "Opennebula
> >> >>> >> >> >> >> > 4.2.0
> >> >>> >> >> >> >> > by
> >> >>> >> >> >> >> > C12G
> >> >>> >> >> >> >> > Labs",
> >> >>> >> >> >> >> > the commands "one -v" or "one -version" not working,
> Is
> >> >>> >> >> >> >> > this
> >> >>> >> >> >> >> > version
> >> >>> >> >> >> >> > for
> >> >>> >> >> >> >> > opennebula?, I did the installation with command
> >> >>> >> >> >> >> > "apt-get
> >> >>> >> >> >> >> > install
> >> >>> >> >> >> >> > opennebula".
> >> >>> >> >> >> >> >
> >> >>> >> >> >> >> > Please, guide me more clearly, because I have the
> >> >>> >> >> >> >> > others
> >> >>> >> >> >> >> > hypervisors
> >> >>> >> >> >> >> > working with opennebula too.
> >> >>> >> >> >> >> >
> >> >>> >> >> >> >> > Thanks Tino,
> >> >>> >> >> >> >> >
> >> >>> >> >> >> >> > Caty.
> >> >>> >> >> >> >> >
> >> >>> >> >> >> >> >
> >> >>> >> >> >> >> > 2013/11/4 Tino Vazquez <cvazquez at c12g.com>
> >> >>> >> >> >> >> >>
> >> >>> >> >> >> >> >> Hi Catalina,
> >> >>> >> >> >> >> >>
> >> >>> >> >> >> >> >> Which OpenNebula version are you using? If you are in
> >> >>> >> >> >> >> >> 4.2,
> >> >>> >> >> >> >> >> be
> >> >>> >> >> >> >> >> aware
> >> >>> >> >> >> >> >> that the only datastore drivers for VMware are the
> >> >>> >> >> >> >> >> 'vmfs',
> >> >>> >> >> >> >> >> not
> >> >>> >> >> >> >> >> 'shared'.
> >> >>> >> >> >> >> >>
> >> >>> >> >> >> >> >> Regards,
> >> >>> >> >> >> >> >>
> >> >>> >> >> >> >> >> -Tino
> >> >>> >> >> >> >> >> --
> >> >>> >> >> >> >> >> OpenNebula - Flexible Enterprise Cloud Made Simple
> >> >>> >> >> >> >> >>
> >> >>> >> >> >> >> >> --
> >> >>> >> >> >> >> >> Constantino V?zquez Blanco, PhD, MSc
> >> >>> >> >> >>
> >> >>> >> >> >> >> >> Senior Infrastructure Architect at C12G Labs
> >> >>> >> >> >> >> >> www.c12g.com | @C12G | es.linkedin.com/in/tinova
> >> >>> >> >> >> >> >>
> >> >>> >> >> >> >> >> --
> >> >>> >> >> >> >> >> Confidentiality Warning: The information contained in
> >> >>> >> >> >> >> >> this
> >> >>> >> >> >> >> >> e-mail
> >> >>> >> >> >> >> >> and
> >> >>> >> >> >> >> >> any accompanying documents, unless otherwise
> expressly
> >> >>> >> >> >> >> >> indicated,
> >> >>> >> >> >> >> >> is
> >> >>> >> >> >> >> >> confidential and privileged, and is intended solely
> for
> >> >>> >> >> >> >> >> the
> >> >>> >> >> >> >> >> person
> >> >>> >> >> >> >> >> and/or entity to whom it is addressed (i.e. those
> >> >>> >> >> >> >> >> identified
> >> >>> >> >> >> >> >> in
> >> >>> >> >> >> >> >> the
> >> >>> >> >> >> >> >> "To" and "cc" box). They are the property of C12G
> Labs
> >> >>> >> >> >> >> >> S.L..
> >> >>> >> >> >> >> >> Unauthorized distribution, review, use, disclosure,
> or
> >> >>> >> >> >> >> >> copying
> >> >>> >> >> >> >> >> of
> >> >>> >> >> >> >> >> this
> >> >>> >> >> >> >> >> communication, or any part thereof, is strictly
> >> >>> >> >> >> >> >> prohibited
> >> >>> >> >> >> >> >> and
> >> >>> >> >> >> >> >> may
> >> >>> >> >> >> >> >> be
> >> >>> >> >> >> >> >> unlawful. If you have received this e-mail in error,
> >> >>> >> >> >> >> >> please
> >> >>> >> >> >> >> >> notify
> >> >>> >> >> >> >> >> us
> >> >>> >> >> >> >> >> immediately by e-mail at abuse at c12g.com and delete
> the
> >> >>> >> >> >> >> >> e-mail
> >> >>> >> >> >> >> >> and
> >> >>> >> >> >> >> >> attachments and any copy from your system. C12G
> thanks
> >> >>> >> >> >> >> >> you
> >> >>> >> >> >> >> >> for
> >> >>> >> >> >> >> >> your
> >> >>> >> >> >> >> >> cooperation.
> >> >>> >> >> >> >> >>
> >> >>> >> >> >> >> >>
> >> >>> >> >> >> >> >> On Mon, Nov 4, 2013 at 5:40 AM, Catalina Quinde
> >> >>> >> >> >> >> >> <catalinaquinde at gmail.com> wrote:
> >> >>> >> >> >> >> >> > Hi friends, please help me in this problem
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> > I have opennebula working with nodes kvm, xen, Esxi
> >> >>> >> >> >> >> >> > 5.1
> >> >>> >> >> >> >> >> > and
> >> >>> >> >> >> >> >> > OpenVZ, I
> >> >>> >> >> >> >> >> > did VM
> >> >>> >> >> >> >> >> > in Opennebula for KVM and Xen, VM states RUNN, but
> >> >>> >> >> >> >> >> > when I
> >> >>> >> >> >> >> >> > made
> >> >>> >> >> >> >> >> > a
> >> >>> >> >> >> >> >> > VM
> >> >>> >> >> >> >> >> > in
> >> >>> >> >> >> >> >> > Opennebula for Esxi 5.1, I have this error:
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> > ------------------------------------------------
> >> >>> >> >> >> >> >> > oneadmin at ubuntuOpNeb:~$ cat /var/log/one/36.log
> >> >>> >> >> >> >> >> > Thu Oct 31 11:18:02 2013 [DiM][I]: New VM state is
> >> >>> >> >> >> >> >> > ACTIVE.
> >> >>> >> >> >> >> >> > Thu Oct 31 11:18:02 2013 [LCM][I]: New VM state is
> >> >>> >> >> >> >> >> > PROLOG.
> >> >>> >> >> >> >> >> > Thu Oct 31 11:18:03 2013 [TM][I]: Command execution
> >> >>> >> >> >> >> >> > fail:
> >> >>> >> >> >> >> >> > /var/lib/one/remotes/tm/shared/clone
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> >
> ubuntuOpNeb:/var/lib/one/datastores/1/02e8c67d4f59826e9fb12ccb48f77557
> >> >>> >> >> >> >> >> > demos:/var/lib/one/datastores/0/36/disk.0 36 1
> >> >>> >> >> >> >> >> > Thu Oct 31 11:18:03 2013 [TM][I]: clone: Cloning
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> >
> /var/lib/one/datastores/1/02e8c67d4f59826e9fb12ccb48f77557
> >> >>> >> >> >> >> >> > in
> >> >>> >> >> >> >> >> > demos:/var/lib/one/datastores/0/36/disk.0
> >> >>> >> >> >> >> >> > Thu Oct 31 11:18:03 2013 [TM][E]: clone: Command
> "cd
> >> >>> >> >> >> >> >> > /var/lib/one/datastores/0/36; cp
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> >
> /var/lib/one/datastores/1/02e8c67d4f59826e9fb12ccb48f77557
> >> >>> >> >> >> >> >> > /var/lib/one/datastores/0/36/disk.0" failed: cp:
> >> >>> >> >> >> >> >> > can't
> >> >>> >> >> >> >> >> > stat
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> >
> '/var/lib/one/datastores/1/02e8c67d4f59826e9fb12ccb48f77557':
> >> >>> >> >> >> >> >> > No
> >> >>> >> >> >> >> >> > such
> >> >>> >> >> >> >> >> > file
> >> >>> >> >> >> >> >> > or directory
> >> >>> >> >> >> >> >> > Thu Oct 31 11:18:03 2013 [TM][E]: Error copying
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> >
> ubuntuOpNeb:/var/lib/one/datastores/1/02e8c67d4f59826e9fb12ccb48f77557
> >> >>> >> >> >> >> >> > to
> >> >>> >> >> >> >> >> > demos:/var/lib/one/datastores/0/36/disk.0
> >> >>> >> >> >> >> >> > Thu Oct 31 11:18:03 2013 [TM][I]: ExitCode: 1
> >> >>> >> >> >> >> >> > Thu Oct 31 11:18:03 2013 [TM][E]: Error executing
> >> >>> >> >> >> >> >> > image
> >> >>> >> >> >> >> >> > transfer
> >> >>> >> >> >> >> >> > script:
> >> >>> >> >> >> >> >> > Error copying
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> >
> ubuntuOpNeb:/var/lib/one/datastores/1/02e8c67d4f59826e9fb12ccb48f77557
> >> >>> >> >> >> >> >> > to
> >> >>> >> >> >> >> >> > demos:/var/lib/one/datastores/0/36/disk.0
> >> >>> >> >> >> >> >> > Thu Oct 31 11:18:03 2013 [DiM][I]: New VM state is
> >> >>> >> >> >> >> >> > FAILED
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> >
> ----------------------------------------------------------
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> > Here I put some features of my settings in
> >> >>> >> >> >> >> >> > opennebula:
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> > The datastores are: 0, 1 and 2; the 0 and 1
> >> >>> >> >> >> >> >> > datastores
> >> >>> >> >> >> >> >> > are
> >> >>> >> >> >> >> >> > shared,
> >> >>> >> >> >> >> >> > and 2
> >> >>> >> >> >> >> >> > is
> >> >>> >> >> >> >> >> > ssh, Esxi works with 0 and 1 datastores.
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> > oned.conf file have TM configuration general for
> all
> >> >>> >> >> >> >> >> > hypervisors.
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> > Please help me for solved this problem.
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> > Thanks, Caty.
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> > _______________________________________________
> >> >>> >> >> >> >> >> > Users mailing list
> >> >>> >> >> >> >> >> > Users at lists.opennebula.org
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >> >
> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
> >> >>> >> >> >> >> >> >
> >> >>> >> >> >> >> >
> >> >>> >> >> >> >> >
> >> >>> >> >> >> >
> >> >>> >> >> >> >
> >> >>> >> >> >>
> >> >>> >> >> >>
> >> >>> >> >> >> ------------------------------
> >> >>> >> >> >>
> >> >>> >> >> >> Message: 3
> >> >>> >> >> >> Date: Mon, 11 Nov 2013 15:24:52 +0100
> >> >>> >> >> >> From: Tino Vazquez <cvazquez at c12g.com>
> >> >>> >> >> >> To: Andranik Hayrapetyan <andranik.h89 at gmail.com>
> >> >>> >> >> >> Cc: users <users at lists.opennebula.org>
> >> >>> >> >> >> Subject: Re: [one-users] Problem with oZones. Error 401
> while
> >> >>> >> >> >> trying
> >> >>> >> >> >> to access a zone
> >> >>> >> >> >> Message-ID:
> >> >>> >> >> >>
> >> >>> >> >> >>
> >> >>> >> >> >>
> >> >>> >> >> >> <CAHfKwc0Q=
> FxRAkYtqQKJLLnSTi-mJZSFBKNz1vr1nQfou8oh6A at mail.gmail.com>
> >> >>> >> >> >> Content-Type: text/plain; charset=ISO-8859-1
> >> >>> >> >> >>
> >> >>> >> >> >> Hi,
> >> >>> >> >> >>
> >> >>> >> >> >> The HTTP code (401) tells us that the credentials are not
> >> >>> >> >> >> being
> >> >>> >> >> >> recognize. Can you check that the oneadmin credentials used
> >> >>> >> >> >> to
> >> >>> >> >> >> create
> >> >>> >> >> >> the 'not working' zone are indeed the right ones?
> >> >>> >> >> >>
> >> >>> >> >> >> The best way to find out would be to check the $ONE_AUTH
> file
> >> >>> >> >> >> of
> >> >>> >> >> >> the
> >> >>> >> >> >> zone, and recreating the zone in oZones using those
> >> >>> >> >> >> credentials.
> >> >>> >> >> >>
> >> >>> >> >> >> Best regards,
> >> >>> >> >> >>
> >> >>> >> >> >>
> >> >>> >> >> >> -Tino
> >> >>> >> >> >> --
> >> >>> >> >> >> OpenNebula - Flexible Enterprise Cloud Made Simple
> >> >>> >> >> >>
> >> >>> >> >> >> --
> >> >>> >> >> >> Constantino V?zquez Blanco, PhD, MSc
> >> >>> >> >> >>
> >> >>> >> >> >> Senior Infrastructure Architect at C12G Labs
> >> >>> >> >> >> www.c12g.com | @C12G | es.linkedin.com/in/tinova
> >> >>> >> >> >>
> >> >>> >> >> >> --
> >> >>> >> >> >> Confidentiality Warning: The information contained in this
> >> >>> >> >> >> e-mail
> >> >>> >> >> >> and
> >> >>> >> >> >> any accompanying documents, unless otherwise expressly
> >> >>> >> >> >> indicated,
> >> >>> >> >> >> is
> >> >>> >> >> >> confidential and privileged, and is intended solely for the
> >> >>> >> >> >> person
> >> >>> >> >> >> and/or entity to whom it is addressed (i.e. those
> identified
> >> >>> >> >> >> in
> >> >>> >> >> >> the
> >> >>> >> >> >> "To" and "cc" box). They are the property of C12G Labs
> S.L..
> >> >>> >> >> >> Unauthorized distribution, review, use, disclosure, or
> >> >>> >> >> >> copying of
> >> >>> >> >> >> this
> >> >>> >> >> >> communication, or any part thereof, is strictly prohibited
> >> >>> >> >> >> and
> >> >>> >> >> >> may
> >> >>> >> >> >> be
> >> >>> >> >> >> unlawful. If you have received this e-mail in error, please
> >> >>> >> >> >> notify
> >> >>> >> >> >> us
> >> >>> >> >> >> immediately by e-mail at abuse at c12g.com and delete the
> e-mail
> >> >>> >> >> >> and
> >> >>> >> >> >> attachments and any copy from your system. C12G thanks you
> >> >>> >> >> >> for
> >> >>> >> >> >> your
> >> >>> >> >> >> cooperation.
> >> >>> >> >> >>
> >> >>> >> >> >>
> >> >>> >> >> >> On Sat, Nov 9, 2013 at 11:06 AM, Andranik Hayrapetyan
> >> >>> >> >> >> <andranik.h89 at gmail.com> wrote:
> >> >>> >> >> >> > Good day.
> >> >>> >> >> >> >
> >> >>> >> >> >> > I have setup OpenNebula 4.2 with ozones server. I have
> >> >>> >> >> >> > added 3
> >> >>> >> >> >> > zones
> >> >>> >> >> >> > to
> >> >>> >> >> >> > it
> >> >>> >> >> >> > and created a VDC for each one. For 2 of them everything
> >> >>> >> >> >> > works
> >> >>> >> >> >> > just
> >> >>> >> >> >> > fine. I
> >> >>> >> >> >> > can access the sunstone web UI through my oZones server.
> >> >>> >> >> >> > But
> >> >>> >> >> >> > when
> >> >>> >> >> >> > I
> >> >>> >> >> >> > try
> >> >>> >> >> >> > to
> >> >>> >> >> >> > access the third one I see just blank browser. In
> >> >>> >> >> >> > access.log of
> >> >>> >> >> >> > my
> >> >>> >> >> >> > httpd
> >> >>> >> >> >> > I
> >> >>> >> >> >> > see the following:
> >> >>> >> >> >> > "GET /sunstone_MY_ZONE_3/ HTTP/1.1" 401 - "-"
> "Mozilla/5.0
> >> >>> >> >> >> > (X11;
> >> >>> >> >> >> > Linux
> >> >>> >> >> >> > x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Ubuntu
> >> >>> >> >> >> > Chromium/MY_IP
> >> >>> >> >> >> > Chrome/MY_IP Safari/537.36"
> >> >>> >> >> >> >
> >> >>> >> >> >> > The Rewrite rules in my .htaccess are made the same way
> for
> >> >>> >> >> >> > each
> >> >>> >> >> >> > VDC.
> >> >>> >> >> >> > Here
> >> >>> >> >> >> > is one of them:
> >> >>> >> >> >> > RewriteRule ^MY_ZONE_3 http://IP_OF_ZONE:2633/RPC2 [P]
> >> >>> >> >> >> > RewriteRule ^sunstone_MY_ZONE_3/(.+)
> >> >>> >> >> >> > http://IP_OF_ZONE:9869//$1
> >> >>> >> >> >> > [P]
> >> >>> >> >> >> > RewriteRule ^sunstone_MY_ZONE_3 http://IP_OF_ZONE:9869//
> >> >>> >> >> >> > [P]
> >> >>> >> >> >> >
> >> >>> >> >> >> > What can I do to solve this problem? Can anyone help me,
> >> >>> >> >> >> > please?
> >> >>> >> >> >> >
> >> >>> >> >> >> > P.S. Sorry, my last email was sent by mistake. It was
> >> >>> >> >> >> > incomplete.
> >> >>> >> >> >>
> >> >>> >> >> >> >
> >> >>> >> >> >> >
> >> >>> >> >> >> >
> >> >>> >> >> >> >
> >> >>> >> >> >> >
> >> >>> >> >> >> > _______________________________________________
> >> >>> >> >> >> > Users mailing list
> >> >>> >> >> >> > Users at lists.opennebula.org
> >> >>> >> >> >> >
> >> >>> >> >> >> >
> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
> >> >>> >> >> >> >
> >> >>> >> >> >>
> >> >>> >> >> >>
> >> >>> >> >> >> ------------------------------
> >> >>> >> >> >>
> >> >>> >> >> >>
> >> >>> >> >> >> _______________________________________________
> >> >>> >> >> >> Users mailing list
> >> >>> >> >> >> Users at lists.opennebula.org
> >> >>> >> >> >>
> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
> >> >>> >> >> >>
> >> >>> >> >> >>
> >> >>> >> >> >> End of Users Digest, Vol 69, Issue 28
> >> >>> >> >> >> *************************************
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> >
> >> >>> >> >> > _______________________________________________
> >> >>> >> >> > Users mailing list
> >> >>> >> >> > Users at lists.opennebula.org
> >> >>> >> >> >
> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
> >> >>> >> >> >
> >> >>> >> >
> >> >>> >> >
> >> >>> >> >
> >> >>> >> > _______________________________________________
> >> >>> >> > Users mailing list
> >> >>> >> > Users at lists.opennebula.org
> >> >>> >> > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
> >> >>> >> >
> >> >>> >>
> >> >>> >>
> >> >>> >> ------------------------------
> >> >>> >>
> >> >>> >> _______________________________________________
> >> >>> >> Users mailing list
> >> >>> >> Users at lists.opennebula.org
> >> >>> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
> >> >>> >>
> >> >>> >>
> >> >>> >> End of Users Digest, Vol 69, Issue 33
> >> >>> >> *************************************
> >> >>> >
> >> >>> >
> >> >>> >
> >> >>> > _______________________________________________
> >> >>> > Users mailing list
> >> >>> > Users at lists.opennebula.org
> >> >>> > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
> >> >>> >
> >> >>>
> >> >>>
> >> >>> ------------------------------
> >> >>>
> >> >>> _______________________________________________
> >> >>> Users mailing list
> >> >>> Users at lists.opennebula.org
> >> >>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
> >> >>>
> >> >>>
> >> >>> End of Users Digest, Vol 69, Issue 35
> >> >>> *************************************
> >> >>
> >> >>
> >> >>
> >> >> _______________________________________________
> >> >> Users mailing list
> >> >> Users at lists.opennebula.org
> >> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
> >> >>
> >>
> >>
> >> ------------------------------
> >>
> >> _______________________________________________
> >> Users mailing list
> >> Users at lists.opennebula.org
> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
> >>
> >>
> >> End of Users Digest, Vol 69, Issue 44
> >> *************************************
> >
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users at lists.opennebula.org
> > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
> >
>
>
> ------------------------------
>
> _______________________________________________
> Users mailing list
> Users at lists.opennebula.org
> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>
>
> End of Users Digest, Vol 69, Issue 48
> *************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20131112/6e9eddb5/attachment-0002.htm>
More information about the Users
mailing list