[one-users] Users Digest, Vol 61, Issue 50
Tino Vazquez
tinova at opennebula.org
Wed Mar 20 07:26:10 PDT 2013
Hi,
Indeed, nested virtualization i think is out of the question with your
hardware. I would suggest trying the VirtualBox appliance
()http://opennebula.org/cloud:sandboxvirtualbox, much lighter than the
nested ESX within Workstation, and compatible with your set up. Let me
know if you have any problem with this.
Regards,
-Tino
PS: Please, respond to the list as well, I may skip the mail but
others can reply to your questions.
--
Constantino Vázquez Blanco, PhD, MSc
Project Engineer
OpenNebula - The Open-Source Solution for Data Center Virtualization
www.OpenNebula.org | @tinova79 | @OpenNebula
On Wed, Mar 20, 2013 at 2:46 PM, A B M MONIRUZZAMAN
<abm.mzkhan at gmail.com> wrote:
> Dear
> Thank your for response.
> I am giving you my laptop's basic info. you may find any clue for not
> properly install.
>
> Did I not install packages according to
> http://opennebula.org/cloud:sandboxesx ?
> Should I go for another solution? like Sandbox with Virtualbox or KVM ? with
> my laptop.
> I have another laptop acer with celeron processor and 2 GB ram, how do I use
> it for implementing OpenNebula Sandbox ?
>
> Best
>
> A B M Moniruzzaman
>
>
> On Wed, Mar 20, 2013 at 7:20 PM, Tino Vazquez <tinova at opennebula.org> wrote:
>>
>> Hi,
>>
>> The problem that I mainly see is with screenshot 2.jpg. It is stated
>> there that your laptop doesn't have VT extension in the CPI, so it
>> cannot do nested virtualization. That may be why you cannot properly
>> access the sandbox, since you are running an ESX inside the
>> Workstation, and then the sandbox inside the ESX (nested
>> virtualization).
>>
>
>
>>
>> I would suggest trying to create a new VM in the ESX with a blank disk
>> and see if that boots (even if it is to say that there is no Operating
>> System). If it doesn't, then there is zero chance to get the ESX
>> sandbox working in your setup (you will need at least one more
>> computer).
>>
>> Hope it helps,
>>
>> -Tino
>>
>> --
>> Constantino Vázquez Blanco, PhD, MSc
>> Project Engineer
>> OpenNebula - The Open-Source Solution for Data Center Virtualization
>> www.OpenNebula.org | @tinova79 | @OpenNebula
>>
>>
>> On Wed, Mar 20, 2013 at 2:10 PM, A B M MONIRUZZAMAN
>> <abm.mzkhan at gmail.com> wrote:
>> > Dear
>> >
>> > Please what should I do now ,suggest me.
>> >
>> > I have a presentation Saturday 23 March 2013, and I have to show
>> > OpenNebula
>> > 3.8 ESX Sandbox.
>> >
>> > What I need to show - a prototype of private cloud and access to the
>> > cloud
>> > and use a application in cloud.
>> >
>> > Please give me idea - what packages should I configure within OpenNebula
>> > site.
>> >
>> > Our university,( Daffodil international University web:
>> > http://www.daffodilvarsity.edu.bd/ ) are just now being experiencing
>> > with
>> > OpenNebula. They are planning to implement a cloud platforms and
>> > complete
>> > university into the cloud.
>> >
>> > Please early reply to me.
>> >
>> > Best
>> >
>> > A B M Moniruzzaman
>> >
>> >
>> > ---------- Forwarded message ----------
>> > From: A B M MONIRUZZAMAN <abm.mzkhan at gmail.com>
>> > Date: Tue, Mar 19, 2013 at 5:39 PM
>> > Subject: Re: [one-users] Users Digest, Vol 61, Issue 50
>> > To: Tino Vazquez <tinova at opennebula.org>
>> > Cc: A B M Moniruzzaman <mzkhan.2000 at gmail.com>
>> >
>> >
>> > Dear
>> > Thank you for response.
>> >
>> > I successfully have done 1. , 2. , 3. , up to 3.3 according to the page
>> > http://opennebula.org/cloud:sandboxesx
>> > And its ok.
>> > I am giving you all screen shots by sequence to start the Appliance that
>> > you
>> > will clearly get idea.
>> >
>> > My laptop is windows 7 with 32 bit; any problem for that?
>> >
>> > Please response this email asap so that I can present to my teacher.
>> >
>> > Regards
>> > Monir
>> >
>> >
>> > On Tue, Mar 19, 2013 at 4:39 PM, Tino Vazquez <tinova at opennebula.org>
>> > wrote:
>> >>
>> >> Hi,
>> >>
>> >> I would suggest installing the appliance onto an ESX hypervisor, not
>> >> Workstation.
>> >>
>> >> In any case, please do send the screenshots, they don't seem to be
>> >> attached in your original mail.
>> >>
>> >> Best regards,
>> >>
>> >> -Tino
>> >> --
>> >> Constantino Vázquez Blanco, PhD, MSc
>> >> Project Engineer
>> >> OpenNebula - The Open-Source Solution for Data Center Virtualization
>> >> www.OpenNebula.org | @tinova79 | @OpenNebula
>> >>
>> >>
>> >> On Sat, Mar 16, 2013 at 8:30 PM, A B M MONIRUZZAMAN
>> >> <abm.mzkhan at gmail.com> wrote:
>> >> > Hi all
>> >> >
>> >> > I am writing to you because I need a little help to successfully
>> >> > implement
>> >> > according to http://opennebula.org/cloud:sandboxesx
>> >> >
>> >> > What I try to do:
>> >> > Implement a open-source private cloud platforms for prototype testing
>> >> > for
>> >> > educational cloud project.
>> >> >
>> >> > I use this page http://opennebula.org/cloud:tryout , and try
>> >> > according
>> >> > to
>> >> > the page : http://opennebula.org/cloud:sandboxesx
>> >> >
>> >> > What I did:
>> >> > 1. Download and install VMware Workstation 9.0
>> >> > 2. Download OpenNebula 3.8 ESX from the marketplace and use IZArc
>> >> > for
>> >> > opennebula-3.8-sandbox-vmdk.
>> >> > 3. Upload Sandbox image ESX 5.0.0 to VMware workstation.
>> >> > 4. Download and install VMware vSphere Client use
>> >> > VMware-viclient-all-5.0.0-623373.exe for setup.
>> >> >
>> >> > I successfully have done 1. , 2. , 3. , up to 3.3 according to the
>> >> > page
>> >> > http://opennebula.org/cloud:sandboxesx
>> >> > But I faced problem at this point the Virtual Machine will be running
>> >> > –
>> >> > no
>> >> > login prompt in the VI client console appears
>> >> > I attached few snap shots for better understanding for you of my
>> >> > current
>> >> > state.
>> >> >
>> >> > Please help me to complete implementation this.
>> >> >
>> >> >
>> >> > On Sun, Mar 17, 2013 at 1:07 AM, <users-request at lists.opennebula.org>
>> >> > wrote:
>> >> >>
>> >> >> Send Users mailing list submissions to
>> >> >> users at lists.opennebula.org
>> >> >>
>> >> >> To subscribe or unsubscribe via the World Wide Web, visit
>> >> >>
>> >> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >> >> or, via email, send a message with subject or body 'help' to
>> >> >> users-request at lists.opennebula.org
>> >> >>
>> >> >> You can reach the person managing the list at
>> >> >> users-owner at lists.opennebula.org
>> >> >>
>> >> >> When replying, please edit your Subject line so it is more specific
>> >> >> than "Re: Contents of Users digest..."
>> >> >>
>> >> >>
>> >> >> Today's Topics:
>> >> >>
>> >> >> 1. Chef cookbook for OpenNebula (to be used with Vagrant)
>> >> >> (Giovanni Toraldo)
>> >> >>
>> >> >>
>> >> >>
>> >> >> ----------------------------------------------------------------------
>> >> >>
>> >> >> Message: 1
>> >> >> Date: Sat, 16 Mar 2013 16:13:52 +0100
>> >> >> From: Giovanni Toraldo <me at gionn.net>
>> >> >> To: Users OpenNebula <users at lists.opennebula.org>
>> >> >> Subject: [one-users] Chef cookbook for OpenNebula (to be used with
>> >> >> Vagrant)
>> >> >> Message-ID:
>> >> >>
>> >> >> <CAAy5=2fXPVjPcRaa0MK8HN-_Rx+583GWmQrF0wmYz0UFYCqaxw at mail.gmail.com>
>> >> >> Content-Type: text/plain; charset=UTF-8
>> >> >>
>> >> >> Hi!
>> >> >>
>> >> >> Recently I was interested in using Vagrant plus some Chef recipes to
>> >> >> easily bootstrap a development machine containing OpenNebula.
>> >> >>
>> >> >> I've published a very basic cookbook that will install build
>> >> >> dependencies and opennebula from sources, served by Vagrant (tested
>> >> >> under Ubuntu 12.04)
>> >> >>
>> >> >> The GitHub repository of the cookbook:
>> >> >> https://github.com/gionn/chef-opennebula
>> >> >>
>> >> >> If you want to take a look to my Vagrantfile, it's here (along with
>> >> >> the latest OpenNebula sources):
>> >> >> https://github.com/liberologico/one/blob/vagrant/Vagrantfile
>> >> >>
>> >> >> If someone is interested in expanding this cookbook, pull requests
>> >> >> are
>> >> >> warmly welcomed (even for fixing crap I put into it)
>> >> >>
>> >> >> Cheers,
>> >> >> --
>> >> >> Giovanni Toraldo
>> >> >> http://gionn.net
>> >> >>
>> >> >>
>> >> >> ------------------------------
>> >> >>
>> >> >> _______________________________________________
>> >> >> Users mailing list
>> >> >> Users at lists.opennebula.org
>> >> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >> >>
>> >> >>
>> >> >> End of Users Digest, Vol 61, Issue 50
>> >> >> *************************************
>> >> >
>> >> >
>> >> >
>> >> > _______________________________________________
>> >> > Users mailing list
>> >> > Users at lists.opennebula.org
>> >> > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >> >
>> >
>> >
>> >
>>
>> --
>> Constantino Vázquez Blanco, PhD, MSc | dsa-research.org/tinova
>> Virtualization Technology Engineer / Researcher
>> OpenNebula - The Open-Source Solution for Data Center Virtualization
>> www.OpenNebula.org | @tinova79 | @OpenNebula
>>
>>
>> On Wed, Mar 20, 2013 at 2:10 PM, A B M MONIRUZZAMAN
>> <abm.mzkhan at gmail.com> wrote:
>> > Dear
>> >
>> > Please what should I do now ,suggest me.
>> >
>> > I have a presentation Saturday 23 March 2013, and I have to show
>> > OpenNebula
>> > 3.8 ESX Sandbox.
>> >
>> > What I need to show - a prototype of private cloud and access to the
>> > cloud
>> > and use a application in cloud.
>> >
>> > Please give me idea - what packages should I configure within OpenNebula
>> > site.
>> >
>> > Our university,( Daffodil international University web:
>> > http://www.daffodilvarsity.edu.bd/ ) are just now being experiencing
>> > with
>> > OpenNebula. They are planning to implement a cloud platforms and
>> > complete
>> > university into the cloud.
>> >
>> > Please early reply to me.
>> >
>> > Best
>> >
>> > A B M Moniruzzaman
>> >
>> >
>> > ---------- Forwarded message ----------
>> > From: A B M MONIRUZZAMAN <abm.mzkhan at gmail.com>
>> > Date: Tue, Mar 19, 2013 at 5:39 PM
>> > Subject: Re: [one-users] Users Digest, Vol 61, Issue 50
>> > To: Tino Vazquez <tinova at opennebula.org>
>> > Cc: A B M Moniruzzaman <mzkhan.2000 at gmail.com>
>> >
>> >
>> > Dear
>> > Thank you for response.
>> >
>> > I successfully have done 1. , 2. , 3. , up to 3.3 according to the page
>> > http://opennebula.org/cloud:sandboxesx
>> > And its ok.
>> > I am giving you all screen shots by sequence to start the Appliance that
>> > you
>> > will clearly get idea.
>> >
>> > My laptop is windows 7 with 32 bit; any problem for that?
>> >
>> > Please response this email asap so that I can present to my teacher.
>> >
>> > Regards
>> > Monir
>> >
>> >
>> > On Tue, Mar 19, 2013 at 4:39 PM, Tino Vazquez <tinova at opennebula.org>
>> > wrote:
>> >>
>> >> Hi,
>> >>
>> >> I would suggest installing the appliance onto an ESX hypervisor, not
>> >> Workstation.
>> >>
>> >> In any case, please do send the screenshots, they don't seem to be
>> >> attached in your original mail.
>> >>
>> >> Best regards,
>> >>
>> >> -Tino
>> >> --
>> >> Constantino Vázquez Blanco, PhD, MSc
>> >> Project Engineer
>> >> OpenNebula - The Open-Source Solution for Data Center Virtualization
>> >> www.OpenNebula.org | @tinova79 | @OpenNebula
>> >>
>> >>
>> >> On Sat, Mar 16, 2013 at 8:30 PM, A B M MONIRUZZAMAN
>> >> <abm.mzkhan at gmail.com> wrote:
>> >> > Hi all
>> >> >
>> >> > I am writing to you because I need a little help to successfully
>> >> > implement
>> >> > according to http://opennebula.org/cloud:sandboxesx
>> >> >
>> >> > What I try to do:
>> >> > Implement a open-source private cloud platforms for prototype testing
>> >> > for
>> >> > educational cloud project.
>> >> >
>> >> > I use this page http://opennebula.org/cloud:tryout , and try
>> >> > according
>> >> > to
>> >> > the page : http://opennebula.org/cloud:sandboxesx
>> >> >
>> >> > What I did:
>> >> > 1. Download and install VMware Workstation 9.0
>> >> > 2. Download OpenNebula 3.8 ESX from the marketplace and use IZArc
>> >> > for
>> >> > opennebula-3.8-sandbox-vmdk.
>> >> > 3. Upload Sandbox image ESX 5.0.0 to VMware workstation.
>> >> > 4. Download and install VMware vSphere Client use
>> >> > VMware-viclient-all-5.0.0-623373.exe for setup.
>> >> >
>> >> > I successfully have done 1. , 2. , 3. , up to 3.3 according to the
>> >> > page
>> >> > http://opennebula.org/cloud:sandboxesx
>> >> > But I faced problem at this point the Virtual Machine will be running
>> >> > –
>> >> > no
>> >> > login prompt in the VI client console appears
>> >> > I attached few snap shots for better understanding for you of my
>> >> > current
>> >> > state.
>> >> >
>> >> > Please help me to complete implementation this.
>> >> >
>> >> >
>> >> > On Sun, Mar 17, 2013 at 1:07 AM, <users-request at lists.opennebula.org>
>> >> > wrote:
>> >> >>
>> >> >> Send Users mailing list submissions to
>> >> >> users at lists.opennebula.org
>> >> >>
>> >> >> To subscribe or unsubscribe via the World Wide Web, visit
>> >> >>
>> >> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >> >> or, via email, send a message with subject or body 'help' to
>> >> >> users-request at lists.opennebula.org
>> >> >>
>> >> >> You can reach the person managing the list at
>> >> >> users-owner at lists.opennebula.org
>> >> >>
>> >> >> When replying, please edit your Subject line so it is more specific
>> >> >> than "Re: Contents of Users digest..."
>> >> >>
>> >> >>
>> >> >> Today's Topics:
>> >> >>
>> >> >> 1. Chef cookbook for OpenNebula (to be used with Vagrant)
>> >> >> (Giovanni Toraldo)
>> >> >>
>> >> >>
>> >> >>
>> >> >> ----------------------------------------------------------------------
>> >> >>
>> >> >> Message: 1
>> >> >> Date: Sat, 16 Mar 2013 16:13:52 +0100
>> >> >> From: Giovanni Toraldo <me at gionn.net>
>> >> >> To: Users OpenNebula <users at lists.opennebula.org>
>> >> >> Subject: [one-users] Chef cookbook for OpenNebula (to be used with
>> >> >> Vagrant)
>> >> >> Message-ID:
>> >> >>
>> >> >> <CAAy5=2fXPVjPcRaa0MK8HN-_Rx+583GWmQrF0wmYz0UFYCqaxw at mail.gmail.com>
>> >> >> Content-Type: text/plain; charset=UTF-8
>> >> >>
>> >> >> Hi!
>> >> >>
>> >> >> Recently I was interested in using Vagrant plus some Chef recipes to
>> >> >> easily bootstrap a development machine containing OpenNebula.
>> >> >>
>> >> >> I've published a very basic cookbook that will install build
>> >> >> dependencies and opennebula from sources, served by Vagrant (tested
>> >> >> under Ubuntu 12.04)
>> >> >>
>> >> >> The GitHub repository of the cookbook:
>> >> >> https://github.com/gionn/chef-opennebula
>> >> >>
>> >> >> If you want to take a look to my Vagrantfile, it's here (along with
>> >> >> the latest OpenNebula sources):
>> >> >> https://github.com/liberologico/one/blob/vagrant/Vagrantfile
>> >> >>
>> >> >> If someone is interested in expanding this cookbook, pull requests
>> >> >> are
>> >> >> warmly welcomed (even for fixing crap I put into it)
>> >> >>
>> >> >> Cheers,
>> >> >> --
>> >> >> Giovanni Toraldo
>> >> >> http://gionn.net
>> >> >>
>> >> >>
>> >> >> ------------------------------
>> >> >>
>> >> >> _______________________________________________
>> >> >> Users mailing list
>> >> >> Users at lists.opennebula.org
>> >> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >> >>
>> >> >>
>> >> >> End of Users Digest, Vol 61, Issue 50
>> >> >> *************************************
>> >> >
>> >> >
>> >> >
>> >> > _______________________________________________
>> >> > Users mailing list
>> >> > Users at lists.opennebula.org
>> >> > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >> >
>> >
>> >
>> >
>
>
--
Constantino Vázquez Blanco, PhD, MSc | dsa-research.org/tinova
Virtualization Technology Engineer / Researcher
OpenNebula - The Open-Source Solution for Data Center Virtualization
www.OpenNebula.org | @tinova79 | @OpenNebula
On Wed, Mar 20, 2013 at 2:46 PM, A B M MONIRUZZAMAN
<abm.mzkhan at gmail.com> wrote:
> Dear
> Thank your for response.
> I am giving you my laptop's basic info. you may find any clue for not
> properly install.
>
> Did I not install packages according to
> http://opennebula.org/cloud:sandboxesx ?
> Should I go for another solution? like Sandbox with Virtualbox or KVM ? with
> my laptop.
> I have another laptop acer with celeron processor and 2 GB ram, how do I use
> it for implementing OpenNebula Sandbox ?
>
> Best
>
> A B M Moniruzzaman
>
>
> On Wed, Mar 20, 2013 at 7:20 PM, Tino Vazquez <tinova at opennebula.org> wrote:
>>
>> Hi,
>>
>> The problem that I mainly see is with screenshot 2.jpg. It is stated
>> there that your laptop doesn't have VT extension in the CPI, so it
>> cannot do nested virtualization. That may be why you cannot properly
>> access the sandbox, since you are running an ESX inside the
>> Workstation, and then the sandbox inside the ESX (nested
>> virtualization).
>>
>
>
>>
>> I would suggest trying to create a new VM in the ESX with a blank disk
>> and see if that boots (even if it is to say that there is no Operating
>> System). If it doesn't, then there is zero chance to get the ESX
>> sandbox working in your setup (you will need at least one more
>> computer).
>>
>> Hope it helps,
>>
>> -Tino
>>
>> --
>> Constantino Vázquez Blanco, PhD, MSc
>> Project Engineer
>> OpenNebula - The Open-Source Solution for Data Center Virtualization
>> www.OpenNebula.org | @tinova79 | @OpenNebula
>>
>>
>> On Wed, Mar 20, 2013 at 2:10 PM, A B M MONIRUZZAMAN
>> <abm.mzkhan at gmail.com> wrote:
>> > Dear
>> >
>> > Please what should I do now ,suggest me.
>> >
>> > I have a presentation Saturday 23 March 2013, and I have to show
>> > OpenNebula
>> > 3.8 ESX Sandbox.
>> >
>> > What I need to show - a prototype of private cloud and access to the
>> > cloud
>> > and use a application in cloud.
>> >
>> > Please give me idea - what packages should I configure within OpenNebula
>> > site.
>> >
>> > Our university,( Daffodil international University web:
>> > http://www.daffodilvarsity.edu.bd/ ) are just now being experiencing
>> > with
>> > OpenNebula. They are planning to implement a cloud platforms and
>> > complete
>> > university into the cloud.
>> >
>> > Please early reply to me.
>> >
>> > Best
>> >
>> > A B M Moniruzzaman
>> >
>> >
>> > ---------- Forwarded message ----------
>> > From: A B M MONIRUZZAMAN <abm.mzkhan at gmail.com>
>> > Date: Tue, Mar 19, 2013 at 5:39 PM
>> > Subject: Re: [one-users] Users Digest, Vol 61, Issue 50
>> > To: Tino Vazquez <tinova at opennebula.org>
>> > Cc: A B M Moniruzzaman <mzkhan.2000 at gmail.com>
>> >
>> >
>> > Dear
>> > Thank you for response.
>> >
>> > I successfully have done 1. , 2. , 3. , up to 3.3 according to the page
>> > http://opennebula.org/cloud:sandboxesx
>> > And its ok.
>> > I am giving you all screen shots by sequence to start the Appliance that
>> > you
>> > will clearly get idea.
>> >
>> > My laptop is windows 7 with 32 bit; any problem for that?
>> >
>> > Please response this email asap so that I can present to my teacher.
>> >
>> > Regards
>> > Monir
>> >
>> >
>> > On Tue, Mar 19, 2013 at 4:39 PM, Tino Vazquez <tinova at opennebula.org>
>> > wrote:
>> >>
>> >> Hi,
>> >>
>> >> I would suggest installing the appliance onto an ESX hypervisor, not
>> >> Workstation.
>> >>
>> >> In any case, please do send the screenshots, they don't seem to be
>> >> attached in your original mail.
>> >>
>> >> Best regards,
>> >>
>> >> -Tino
>> >> --
>> >> Constantino Vázquez Blanco, PhD, MSc
>> >> Project Engineer
>> >> OpenNebula - The Open-Source Solution for Data Center Virtualization
>> >> www.OpenNebula.org | @tinova79 | @OpenNebula
>> >>
>> >>
>> >> On Sat, Mar 16, 2013 at 8:30 PM, A B M MONIRUZZAMAN
>> >> <abm.mzkhan at gmail.com> wrote:
>> >> > Hi all
>> >> >
>> >> > I am writing to you because I need a little help to successfully
>> >> > implement
>> >> > according to http://opennebula.org/cloud:sandboxesx
>> >> >
>> >> > What I try to do:
>> >> > Implement a open-source private cloud platforms for prototype testing
>> >> > for
>> >> > educational cloud project.
>> >> >
>> >> > I use this page http://opennebula.org/cloud:tryout , and try
>> >> > according
>> >> > to
>> >> > the page : http://opennebula.org/cloud:sandboxesx
>> >> >
>> >> > What I did:
>> >> > 1. Download and install VMware Workstation 9.0
>> >> > 2. Download OpenNebula 3.8 ESX from the marketplace and use IZArc
>> >> > for
>> >> > opennebula-3.8-sandbox-vmdk.
>> >> > 3. Upload Sandbox image ESX 5.0.0 to VMware workstation.
>> >> > 4. Download and install VMware vSphere Client use
>> >> > VMware-viclient-all-5.0.0-623373.exe for setup.
>> >> >
>> >> > I successfully have done 1. , 2. , 3. , up to 3.3 according to the
>> >> > page
>> >> > http://opennebula.org/cloud:sandboxesx
>> >> > But I faced problem at this point the Virtual Machine will be running
>> >> > –
>> >> > no
>> >> > login prompt in the VI client console appears
>> >> > I attached few snap shots for better understanding for you of my
>> >> > current
>> >> > state.
>> >> >
>> >> > Please help me to complete implementation this.
>> >> >
>> >> >
>> >> > On Sun, Mar 17, 2013 at 1:07 AM, <users-request at lists.opennebula.org>
>> >> > wrote:
>> >> >>
>> >> >> Send Users mailing list submissions to
>> >> >> users at lists.opennebula.org
>> >> >>
>> >> >> To subscribe or unsubscribe via the World Wide Web, visit
>> >> >>
>> >> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >> >> or, via email, send a message with subject or body 'help' to
>> >> >> users-request at lists.opennebula.org
>> >> >>
>> >> >> You can reach the person managing the list at
>> >> >> users-owner at lists.opennebula.org
>> >> >>
>> >> >> When replying, please edit your Subject line so it is more specific
>> >> >> than "Re: Contents of Users digest..."
>> >> >>
>> >> >>
>> >> >> Today's Topics:
>> >> >>
>> >> >> 1. Chef cookbook for OpenNebula (to be used with Vagrant)
>> >> >> (Giovanni Toraldo)
>> >> >>
>> >> >>
>> >> >>
>> >> >> ----------------------------------------------------------------------
>> >> >>
>> >> >> Message: 1
>> >> >> Date: Sat, 16 Mar 2013 16:13:52 +0100
>> >> >> From: Giovanni Toraldo <me at gionn.net>
>> >> >> To: Users OpenNebula <users at lists.opennebula.org>
>> >> >> Subject: [one-users] Chef cookbook for OpenNebula (to be used with
>> >> >> Vagrant)
>> >> >> Message-ID:
>> >> >>
>> >> >> <CAAy5=2fXPVjPcRaa0MK8HN-_Rx+583GWmQrF0wmYz0UFYCqaxw at mail.gmail.com>
>> >> >> Content-Type: text/plain; charset=UTF-8
>> >> >>
>> >> >> Hi!
>> >> >>
>> >> >> Recently I was interested in using Vagrant plus some Chef recipes to
>> >> >> easily bootstrap a development machine containing OpenNebula.
>> >> >>
>> >> >> I've published a very basic cookbook that will install build
>> >> >> dependencies and opennebula from sources, served by Vagrant (tested
>> >> >> under Ubuntu 12.04)
>> >> >>
>> >> >> The GitHub repository of the cookbook:
>> >> >> https://github.com/gionn/chef-opennebula
>> >> >>
>> >> >> If you want to take a look to my Vagrantfile, it's here (along with
>> >> >> the latest OpenNebula sources):
>> >> >> https://github.com/liberologico/one/blob/vagrant/Vagrantfile
>> >> >>
>> >> >> If someone is interested in expanding this cookbook, pull requests
>> >> >> are
>> >> >> warmly welcomed (even for fixing crap I put into it)
>> >> >>
>> >> >> Cheers,
>> >> >> --
>> >> >> Giovanni Toraldo
>> >> >> http://gionn.net
>> >> >>
>> >> >>
>> >> >> ------------------------------
>> >> >>
>> >> >> _______________________________________________
>> >> >> Users mailing list
>> >> >> Users at lists.opennebula.org
>> >> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >> >>
>> >> >>
>> >> >> End of Users Digest, Vol 61, Issue 50
>> >> >> *************************************
>> >> >
>> >> >
>> >> >
>> >> > _______________________________________________
>> >> > Users mailing list
>> >> > Users at lists.opennebula.org
>> >> > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >> >
>> >
>> >
>> >
>>
>> --
>> Constantino Vázquez Blanco, PhD, MSc | dsa-research.org/tinova
>> Virtualization Technology Engineer / Researcher
>> OpenNebula - The Open-Source Solution for Data Center Virtualization
>> www.OpenNebula.org | @tinova79 | @OpenNebula
>>
>>
>> On Wed, Mar 20, 2013 at 2:10 PM, A B M MONIRUZZAMAN
>> <abm.mzkhan at gmail.com> wrote:
>> > Dear
>> >
>> > Please what should I do now ,suggest me.
>> >
>> > I have a presentation Saturday 23 March 2013, and I have to show
>> > OpenNebula
>> > 3.8 ESX Sandbox.
>> >
>> > What I need to show - a prototype of private cloud and access to the
>> > cloud
>> > and use a application in cloud.
>> >
>> > Please give me idea - what packages should I configure within OpenNebula
>> > site.
>> >
>> > Our university,( Daffodil international University web:
>> > http://www.daffodilvarsity.edu.bd/ ) are just now being experiencing
>> > with
>> > OpenNebula. They are planning to implement a cloud platforms and
>> > complete
>> > university into the cloud.
>> >
>> > Please early reply to me.
>> >
>> > Best
>> >
>> > A B M Moniruzzaman
>> >
>> >
>> > ---------- Forwarded message ----------
>> > From: A B M MONIRUZZAMAN <abm.mzkhan at gmail.com>
>> > Date: Tue, Mar 19, 2013 at 5:39 PM
>> > Subject: Re: [one-users] Users Digest, Vol 61, Issue 50
>> > To: Tino Vazquez <tinova at opennebula.org>
>> > Cc: A B M Moniruzzaman <mzkhan.2000 at gmail.com>
>> >
>> >
>> > Dear
>> > Thank you for response.
>> >
>> > I successfully have done 1. , 2. , 3. , up to 3.3 according to the page
>> > http://opennebula.org/cloud:sandboxesx
>> > And its ok.
>> > I am giving you all screen shots by sequence to start the Appliance that
>> > you
>> > will clearly get idea.
>> >
>> > My laptop is windows 7 with 32 bit; any problem for that?
>> >
>> > Please response this email asap so that I can present to my teacher.
>> >
>> > Regards
>> > Monir
>> >
>> >
>> > On Tue, Mar 19, 2013 at 4:39 PM, Tino Vazquez <tinova at opennebula.org>
>> > wrote:
>> >>
>> >> Hi,
>> >>
>> >> I would suggest installing the appliance onto an ESX hypervisor, not
>> >> Workstation.
>> >>
>> >> In any case, please do send the screenshots, they don't seem to be
>> >> attached in your original mail.
>> >>
>> >> Best regards,
>> >>
>> >> -Tino
>> >> --
>> >> Constantino Vázquez Blanco, PhD, MSc
>> >> Project Engineer
>> >> OpenNebula - The Open-Source Solution for Data Center Virtualization
>> >> www.OpenNebula.org | @tinova79 | @OpenNebula
>> >>
>> >>
>> >> On Sat, Mar 16, 2013 at 8:30 PM, A B M MONIRUZZAMAN
>> >> <abm.mzkhan at gmail.com> wrote:
>> >> > Hi all
>> >> >
>> >> > I am writing to you because I need a little help to successfully
>> >> > implement
>> >> > according to http://opennebula.org/cloud:sandboxesx
>> >> >
>> >> > What I try to do:
>> >> > Implement a open-source private cloud platforms for prototype testing
>> >> > for
>> >> > educational cloud project.
>> >> >
>> >> > I use this page http://opennebula.org/cloud:tryout , and try
>> >> > according
>> >> > to
>> >> > the page : http://opennebula.org/cloud:sandboxesx
>> >> >
>> >> > What I did:
>> >> > 1. Download and install VMware Workstation 9.0
>> >> > 2. Download OpenNebula 3.8 ESX from the marketplace and use IZArc
>> >> > for
>> >> > opennebula-3.8-sandbox-vmdk.
>> >> > 3. Upload Sandbox image ESX 5.0.0 to VMware workstation.
>> >> > 4. Download and install VMware vSphere Client use
>> >> > VMware-viclient-all-5.0.0-623373.exe for setup.
>> >> >
>> >> > I successfully have done 1. , 2. , 3. , up to 3.3 according to the
>> >> > page
>> >> > http://opennebula.org/cloud:sandboxesx
>> >> > But I faced problem at this point the Virtual Machine will be running
>> >> > –
>> >> > no
>> >> > login prompt in the VI client console appears
>> >> > I attached few snap shots for better understanding for you of my
>> >> > current
>> >> > state.
>> >> >
>> >> > Please help me to complete implementation this.
>> >> >
>> >> >
>> >> > On Sun, Mar 17, 2013 at 1:07 AM, <users-request at lists.opennebula.org>
>> >> > wrote:
>> >> >>
>> >> >> Send Users mailing list submissions to
>> >> >> users at lists.opennebula.org
>> >> >>
>> >> >> To subscribe or unsubscribe via the World Wide Web, visit
>> >> >>
>> >> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >> >> or, via email, send a message with subject or body 'help' to
>> >> >> users-request at lists.opennebula.org
>> >> >>
>> >> >> You can reach the person managing the list at
>> >> >> users-owner at lists.opennebula.org
>> >> >>
>> >> >> When replying, please edit your Subject line so it is more specific
>> >> >> than "Re: Contents of Users digest..."
>> >> >>
>> >> >>
>> >> >> Today's Topics:
>> >> >>
>> >> >> 1. Chef cookbook for OpenNebula (to be used with Vagrant)
>> >> >> (Giovanni Toraldo)
>> >> >>
>> >> >>
>> >> >>
>> >> >> ----------------------------------------------------------------------
>> >> >>
>> >> >> Message: 1
>> >> >> Date: Sat, 16 Mar 2013 16:13:52 +0100
>> >> >> From: Giovanni Toraldo <me at gionn.net>
>> >> >> To: Users OpenNebula <users at lists.opennebula.org>
>> >> >> Subject: [one-users] Chef cookbook for OpenNebula (to be used with
>> >> >> Vagrant)
>> >> >> Message-ID:
>> >> >>
>> >> >> <CAAy5=2fXPVjPcRaa0MK8HN-_Rx+583GWmQrF0wmYz0UFYCqaxw at mail.gmail.com>
>> >> >> Content-Type: text/plain; charset=UTF-8
>> >> >>
>> >> >> Hi!
>> >> >>
>> >> >> Recently I was interested in using Vagrant plus some Chef recipes to
>> >> >> easily bootstrap a development machine containing OpenNebula.
>> >> >>
>> >> >> I've published a very basic cookbook that will install build
>> >> >> dependencies and opennebula from sources, served by Vagrant (tested
>> >> >> under Ubuntu 12.04)
>> >> >>
>> >> >> The GitHub repository of the cookbook:
>> >> >> https://github.com/gionn/chef-opennebula
>> >> >>
>> >> >> If you want to take a look to my Vagrantfile, it's here (along with
>> >> >> the latest OpenNebula sources):
>> >> >> https://github.com/liberologico/one/blob/vagrant/Vagrantfile
>> >> >>
>> >> >> If someone is interested in expanding this cookbook, pull requests
>> >> >> are
>> >> >> warmly welcomed (even for fixing crap I put into it)
>> >> >>
>> >> >> Cheers,
>> >> >> --
>> >> >> Giovanni Toraldo
>> >> >> http://gionn.net
>> >> >>
>> >> >>
>> >> >> ------------------------------
>> >> >>
>> >> >> _______________________________________________
>> >> >> Users mailing list
>> >> >> Users at lists.opennebula.org
>> >> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >> >>
>> >> >>
>> >> >> End of Users Digest, Vol 61, Issue 50
>> >> >> *************************************
>> >> >
>> >> >
>> >> >
>> >> > _______________________________________________
>> >> > Users mailing list
>> >> > Users at lists.opennebula.org
>> >> > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >> >
>> >
>> >
>> >
>
>
More information about the Users
mailing list