[one-users] Users Digest, Vol 61, Issue 50

Tino Vazquez tinova at opennebula.org
Wed Mar 20 06:20:05 PDT 2013 

Hi,

The problem that I mainly see is with screenshot 2.jpg. It is stated
there that your laptop doesn't have VT extension in the CPI, so it
cannot do nested virtualization. That may be why you cannot properly
access the sandbox, since you are running an ESX inside the
Workstation, and then the sandbox inside the ESX (nested
virtualization).

I would suggest trying to create a new VM in the ESX with a blank disk
and see if that boots (even if it is to say that there is no Operating
System). If it doesn't, then there is zero chance to get the ESX
sandbox working in your setup (you will need at least one more
computer).

Hope it helps,

-Tino

--
Constantino Vázquez Blanco, PhD, MSc
Project Engineer
OpenNebula - The Open-Source Solution for Data Center Virtualization
www.OpenNebula.org | @tinova79 | @OpenNebula


On Wed, Mar 20, 2013 at 2:10 PM, A B M MONIRUZZAMAN
<abm.mzkhan at gmail.com> wrote:
> Dear
>
> Please what should I do now ,suggest me.
>
> I have a presentation Saturday 23 March 2013, and I have to show OpenNebula
> 3.8 ESX Sandbox.
>
> What I need to show - a prototype of private cloud and access to the cloud
> and use a application in cloud.
>
> Please give me idea - what packages should I configure within OpenNebula
> site.
>
> Our university,( Daffodil international University web:
> http://www.daffodilvarsity.edu.bd/ ) are just now being experiencing with
> OpenNebula. They are planning to implement a cloud platforms and complete
> university into the cloud.
>
> Please early reply to me.
>
> Best
>
> A B M Moniruzzaman
>
>
> ---------- Forwarded message ----------
> From: A B M MONIRUZZAMAN <abm.mzkhan at gmail.com>
> Date: Tue, Mar 19, 2013 at 5:39 PM
> Subject: Re: [one-users] Users Digest, Vol 61, Issue 50
> To: Tino Vazquez <tinova at opennebula.org>
> Cc: A B M Moniruzzaman <mzkhan.2000 at gmail.com>
>
>
> Dear
> Thank you for response.
>
> I successfully have done 1. , 2. , 3. ,  up to 3.3 according to the page
> http://opennebula.org/cloud:sandboxesx
> And its ok.
> I am giving you all screen shots by sequence to start the Appliance that you
> will clearly get idea.
>
> My laptop is windows 7 with 32 bit; any problem for that?
>
> Please response this email asap so that I can present to my teacher.
>
> Regards
> Monir
>
>
> On Tue, Mar 19, 2013 at 4:39 PM, Tino Vazquez <tinova at opennebula.org> wrote:
>>
>> Hi,
>>
>> I would suggest installing the appliance onto an ESX hypervisor, not
>> Workstation.
>>
>> In any case, please do send the screenshots, they don't seem to be
>> attached in your original mail.
>>
>> Best regards,
>>
>> -Tino
>> --
>> Constantino Vázquez Blanco, PhD, MSc
>> Project Engineer
>> OpenNebula - The Open-Source Solution for Data Center Virtualization
>> www.OpenNebula.org | @tinova79 | @OpenNebula
>>
>>
>> On Sat, Mar 16, 2013 at 8:30 PM, A B M MONIRUZZAMAN
>> <abm.mzkhan at gmail.com> wrote:
>> > Hi all
>> >
>> > I am writing to you because I need a little help to successfully
>> > implement
>> > according to http://opennebula.org/cloud:sandboxesx
>> >
>> > What I try to do:
>> > Implement a open-source private cloud platforms for prototype testing
>> > for
>> > educational cloud project.
>> >
>> > I use this page http://opennebula.org/cloud:tryout , and try according
>> > to
>> > the page : http://opennebula.org/cloud:sandboxesx
>> >
>> > What I did:
>> > 1. Download and install  VMware Workstation 9.0
>> > 2. Download OpenNebula 3.8 ESX from the marketplace  and use IZArc for
>> > opennebula-3.8-sandbox-vmdk.
>> > 3. Upload Sandbox image ESX 5.0.0 to VMware workstation.
>> > 4. Download and install VMware vSphere Client use
>> > VMware-viclient-all-5.0.0-623373.exe for setup.
>> >
>> > I successfully have done 1. , 2. , 3. ,  up to 3.3 according to the page
>> > http://opennebula.org/cloud:sandboxesx
>> > But I faced problem at this point the Virtual Machine will be running –
>> > no
>> > login prompt in the VI client console appears
>> > I attached few snap shots for better understanding for you of my current
>> > state.
>> >
>> > Please help me to complete implementation this.
>> >
>> >
>> > On Sun, Mar 17, 2013 at 1:07 AM, <users-request at lists.opennebula.org>
>> > wrote:
>> >>
>> >> Send Users mailing list submissions to
>> >>         users at lists.opennebula.org
>> >>
>> >> To subscribe or unsubscribe via the World Wide Web, visit
>> >>         http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >> or, via email, send a message with subject or body 'help' to
>> >>         users-request at lists.opennebula.org
>> >>
>> >> You can reach the person managing the list at
>> >>         users-owner at lists.opennebula.org
>> >>
>> >> When replying, please edit your Subject line so it is more specific
>> >> than "Re: Contents of Users digest..."
>> >>
>> >>
>> >> Today's Topics:
>> >>
>> >>    1. Chef cookbook for OpenNebula (to be used with Vagrant)
>> >>       (Giovanni Toraldo)
>> >>
>> >>
>> >> ----------------------------------------------------------------------
>> >>
>> >> Message: 1
>> >> Date: Sat, 16 Mar 2013 16:13:52 +0100
>> >> From: Giovanni Toraldo <me at gionn.net>
>> >> To: Users OpenNebula <users at lists.opennebula.org>
>> >> Subject: [one-users] Chef cookbook for OpenNebula (to be used with
>> >>         Vagrant)
>> >> Message-ID:
>> >>
>> >> <CAAy5=2fXPVjPcRaa0MK8HN-_Rx+583GWmQrF0wmYz0UFYCqaxw at mail.gmail.com>
>> >> Content-Type: text/plain; charset=UTF-8
>> >>
>> >> Hi!
>> >>
>> >> Recently I was interested in using Vagrant plus some Chef recipes to
>> >> easily bootstrap a development machine containing OpenNebula.
>> >>
>> >> I've published a very basic cookbook that will install build
>> >> dependencies and opennebula from sources, served by Vagrant (tested
>> >> under Ubuntu 12.04)
>> >>
>> >> The GitHub repository of the cookbook:
>> >> https://github.com/gionn/chef-opennebula
>> >>
>> >> If you want to take a look to my Vagrantfile, it's here (along with
>> >> the latest OpenNebula sources):
>> >> https://github.com/liberologico/one/blob/vagrant/Vagrantfile
>> >>
>> >> If someone is interested in expanding this cookbook, pull requests are
>> >> warmly welcomed (even for fixing crap I put into it)
>> >>
>> >> Cheers,
>> >> --
>> >> Giovanni Toraldo
>> >> http://gionn.net
>> >>
>> >>
>> >> ------------------------------
>> >>
>> >> _______________________________________________
>> >> Users mailing list
>> >> Users at lists.opennebula.org
>> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >>
>> >>
>> >> End of Users Digest, Vol 61, Issue 50
>> >> *************************************
>> >
>> >
>> >
>> > _______________________________________________
>> > Users mailing list
>> > Users at lists.opennebula.org
>> > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >
>
>
>

--
Constantino Vázquez Blanco, PhD, MSc | dsa-research.org/tinova
Virtualization Technology Engineer / Researcher
OpenNebula - The Open-Source Solution for Data Center Virtualization
www.OpenNebula.org | @tinova79 | @OpenNebula


On Wed, Mar 20, 2013 at 2:10 PM, A B M MONIRUZZAMAN
<abm.mzkhan at gmail.com> wrote:
> Dear
>
> Please what should I do now ,suggest me.
>
> I have a presentation Saturday 23 March 2013, and I have to show OpenNebula
> 3.8 ESX Sandbox.
>
> What I need to show - a prototype of private cloud and access to the cloud
> and use a application in cloud.
>
> Please give me idea - what packages should I configure within OpenNebula
> site.
>
> Our university,( Daffodil international University web:
> http://www.daffodilvarsity.edu.bd/ ) are just now being experiencing with
> OpenNebula. They are planning to implement a cloud platforms and complete
> university into the cloud.
>
> Please early reply to me.
>
> Best
>
> A B M Moniruzzaman
>
>
> ---------- Forwarded message ----------
> From: A B M MONIRUZZAMAN <abm.mzkhan at gmail.com>
> Date: Tue, Mar 19, 2013 at 5:39 PM
> Subject: Re: [one-users] Users Digest, Vol 61, Issue 50
> To: Tino Vazquez <tinova at opennebula.org>
> Cc: A B M Moniruzzaman <mzkhan.2000 at gmail.com>
>
>
> Dear
> Thank you for response.
>
> I successfully have done 1. , 2. , 3. ,  up to 3.3 according to the page
> http://opennebula.org/cloud:sandboxesx
> And its ok.
> I am giving you all screen shots by sequence to start the Appliance that you
> will clearly get idea.
>
> My laptop is windows 7 with 32 bit; any problem for that?
>
> Please response this email asap so that I can present to my teacher.
>
> Regards
> Monir
>
>
> On Tue, Mar 19, 2013 at 4:39 PM, Tino Vazquez <tinova at opennebula.org> wrote:
>>
>> Hi,
>>
>> I would suggest installing the appliance onto an ESX hypervisor, not
>> Workstation.
>>
>> In any case, please do send the screenshots, they don't seem to be
>> attached in your original mail.
>>
>> Best regards,
>>
>> -Tino
>> --
>> Constantino Vázquez Blanco, PhD, MSc
>> Project Engineer
>> OpenNebula - The Open-Source Solution for Data Center Virtualization
>> www.OpenNebula.org | @tinova79 | @OpenNebula
>>
>>
>> On Sat, Mar 16, 2013 at 8:30 PM, A B M MONIRUZZAMAN
>> <abm.mzkhan at gmail.com> wrote:
>> > Hi all
>> >
>> > I am writing to you because I need a little help to successfully
>> > implement
>> > according to http://opennebula.org/cloud:sandboxesx
>> >
>> > What I try to do:
>> > Implement a open-source private cloud platforms for prototype testing
>> > for
>> > educational cloud project.
>> >
>> > I use this page http://opennebula.org/cloud:tryout , and try according
>> > to
>> > the page : http://opennebula.org/cloud:sandboxesx
>> >
>> > What I did:
>> > 1. Download and install  VMware Workstation 9.0
>> > 2. Download OpenNebula 3.8 ESX from the marketplace  and use IZArc for
>> > opennebula-3.8-sandbox-vmdk.
>> > 3. Upload Sandbox image ESX 5.0.0 to VMware workstation.
>> > 4. Download and install VMware vSphere Client use
>> > VMware-viclient-all-5.0.0-623373.exe for setup.
>> >
>> > I successfully have done 1. , 2. , 3. ,  up to 3.3 according to the page
>> > http://opennebula.org/cloud:sandboxesx
>> > But I faced problem at this point the Virtual Machine will be running –
>> > no
>> > login prompt in the VI client console appears
>> > I attached few snap shots for better understanding for you of my current
>> > state.
>> >
>> > Please help me to complete implementation this.
>> >
>> >
>> > On Sun, Mar 17, 2013 at 1:07 AM, <users-request at lists.opennebula.org>
>> > wrote:
>> >>
>> >> Send Users mailing list submissions to
>> >>         users at lists.opennebula.org
>> >>
>> >> To subscribe or unsubscribe via the World Wide Web, visit
>> >>         http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >> or, via email, send a message with subject or body 'help' to
>> >>         users-request at lists.opennebula.org
>> >>
>> >> You can reach the person managing the list at
>> >>         users-owner at lists.opennebula.org
>> >>
>> >> When replying, please edit your Subject line so it is more specific
>> >> than "Re: Contents of Users digest..."
>> >>
>> >>
>> >> Today's Topics:
>> >>
>> >>    1. Chef cookbook for OpenNebula (to be used with Vagrant)
>> >>       (Giovanni Toraldo)
>> >>
>> >>
>> >> ----------------------------------------------------------------------
>> >>
>> >> Message: 1
>> >> Date: Sat, 16 Mar 2013 16:13:52 +0100
>> >> From: Giovanni Toraldo <me at gionn.net>
>> >> To: Users OpenNebula <users at lists.opennebula.org>
>> >> Subject: [one-users] Chef cookbook for OpenNebula (to be used with
>> >>         Vagrant)
>> >> Message-ID:
>> >>
>> >> <CAAy5=2fXPVjPcRaa0MK8HN-_Rx+583GWmQrF0wmYz0UFYCqaxw at mail.gmail.com>
>> >> Content-Type: text/plain; charset=UTF-8
>> >>
>> >> Hi!
>> >>
>> >> Recently I was interested in using Vagrant plus some Chef recipes to
>> >> easily bootstrap a development machine containing OpenNebula.
>> >>
>> >> I've published a very basic cookbook that will install build
>> >> dependencies and opennebula from sources, served by Vagrant (tested
>> >> under Ubuntu 12.04)
>> >>
>> >> The GitHub repository of the cookbook:
>> >> https://github.com/gionn/chef-opennebula
>> >>
>> >> If you want to take a look to my Vagrantfile, it's here (along with
>> >> the latest OpenNebula sources):
>> >> https://github.com/liberologico/one/blob/vagrant/Vagrantfile
>> >>
>> >> If someone is interested in expanding this cookbook, pull requests are
>> >> warmly welcomed (even for fixing crap I put into it)
>> >>
>> >> Cheers,
>> >> --
>> >> Giovanni Toraldo
>> >> http://gionn.net
>> >>
>> >>
>> >> ------------------------------
>> >>
>> >> _______________________________________________
>> >> Users mailing list
>> >> Users at lists.opennebula.org
>> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >>
>> >>
>> >> End of Users Digest, Vol 61, Issue 50
>> >> *************************************
>> >
>> >
>> >
>> > _______________________________________________
>> > Users mailing list
>> > Users at lists.opennebula.org
>> > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >
>
>
>

More information about the Users mailing list