[one-users] Cannot run VM, fresh install. Could not create domain from /var/lib/one//datastores/
Alexander Sibetheros
alexsibeth at gmail.com
Mon Dec 16 23:35:03 PST 2013
Ok, problem fixed. Vmware's automatic configuration didn't enable hardware
acceleration. Once that got running the vm boots and runs.
One tiny problem is that I don't know the default username/password for
centOS.. or how to create a vm with username/password..
Nonetheless, thank you all very much.
On Tue, Dec 17, 2013 at 9:11 AM, Alexander Sibetheros
<alexsibeth at gmail.com>wrote:
> I think I fixed the bridge problem, but now I get a new problem(and again
> googling didn't help).
> I restarted both vm's, restarted sunstone, mounted the nfs, recreated the
> network with correct bridge, deleted old failed vm, and created a new one
> but Im getting kvm problem now:
>
> Mon Dec 16 23:05:04 2013 [VMM][I]: error: Failed to create domain from
> /var/lib/one//datastores/0/2/deployment.0
> Mon Dec 16 23:05:04 2013 [VMM][I]: error: internal error process exited
> while connecting to monitor: Could not access KVM kernel module: No such
> file or directory
> Mon Dec 16 23:05:04 2013 [VMM][I]: failed to initialize KVM: No such file
> or directory
> Mon Dec 16 23:05:04 2013 [VMM][I]: No accelerator found!
> Mon Dec 16 23:05:04 2013 [VMM][I]:
> Mon Dec 16 23:05:04 2013 [VMM][E]: Could not create domain from
> /var/lib/one//datastores/0/2/deployment.0
> Mon Dec 16 23:05:04 2013 [VMM][I]: ExitCode: 255
> Mon Dec 16 23:05:04 2013 [VMM][I]: Failed to execute virtualization driver
> operation: deploy.
> Mon Dec 16 23:05:04 2013 [VMM][E]: Error deploying virtual machine: Could
> not create domain from /var/lib/one//datastores/0/2/deployment.0
>
>
> On Tue, Dec 17, 2013 at 8:41 AM, Alexander Sibetheros <
> alexsibeth at gmail.com> wrote:
>
>> Well, ifconfig shows eth0,lo and an extra network virbro(which I haven't
>> physically added to interfaces).
>> I will try the configurations with virbr0 everywhere(in interface files +
>> network file) and update.
>>
>>
>> On Tue, Dec 17, 2013 at 1:49 AM, Jens Hoffmann <jens.hoffmann at cuesoft.eu>wrote:
>>
>>> Does "ifconfig" on your host list eth0 and the loopback device only?
>>> Does "brctl show" on your host return an empty list? In that case you have
>>> no bridge and you need to setup one to bridge between eth0 and your nebula
>>> vms. The vmware bridge that connects your host-vm to the internet or
>>> wherever acts upon a different layer. vmware won't setup a bridge inside of
>>> your host-vm.
>>>
>>>
>>> Hope this is of some help.
>>>
>>>
>>>
>>> Jens
>>>
>>> --
>>> gpg --keyserver pgp.mit.edu --recv-keys 0xDB1CAFB5
>>>
>>>
>>>
>>> On 12/17/2013 12:28 AM, Alexander Sibetheros wrote:
>>>
>>> In that case it probably is the bridge settings.
>>> Because I am running host/nodes from vm(vmware, with bridge network) I
>>> have eth0 reserved for that.
>>> I changed the interface file too:
>>> auto eth0
>>> iface eth0 inet static
>>> address 192.168.0.20
>>> netmask 255.255.255.0
>>> broadcast 192.168.0.255
>>> gateway 192.168.0.1
>>> But didn't add anything on bridges because I though eth0 was already a
>>> bridge(from vmware).
>>> (Normally the tutorial mentions: iface br0 inet static....
>>> # bridge_ports eth0
>>> # bridge_fd 9
>>> # bridge_hello 2
>>> # bridge_maxage 12
>>> # bridge_stp off).
>>>
>>> My 1 node(also vm) has similar settings(iface eth0 inet static with no
>>> bridge settings).
>>>
>>> In my virtual network I changed BRIDGE= eth0(previously br0).
>>>
>>> If this is not allowed then what should I change?
>>>
>>>
>>> On Tue, Dec 17, 2013 at 1:05 AM, Jens Hoffmann <jens.hoffmann at cuesoft.eu
>>> > wrote:
>>>
>>>> Hi,
>>>>
>>>> please double check / post:
>>>>
>>>> * "brctl show" on your host
>>>> * Network related commands eventually logged in /var/log/auth.log
>>>> * Any related hints in /var/log/syslog
>>>> * /etc/network/interfaces on your host
>>>> * the nebula network template
>>>> * anything else that you might find to be of some help
>>>>
>>>>
>>>> From the logs you have posted it seems to be a problem with your bridge
>>>> setup.
>>>>
>>>>
>>>> Jens
>>>>
>>>> --
>>>> gpg --keyserver pgp.mit.edu --recv-keys 0xDB1CAFB5
>>>>
>>>>
>>>>
>>>> On 12/16/2013 11:39 PM, Alexander Sibetheros wrote:
>>>>
>>>> I freshly installed 2 12.04.3 Ubuntu VM's and followed the tutorial
>>>> http://www.opennebula.org/documentation:rel4.4:qs_ubuntu_kvm as best
>>>> as possible.
>>>> When I run the vm( onetemplate instantiate "CentOS-6.4" --name "My
>>>> Scratch VM"
>>>> I get failed state and this error:
>>>>
>>>> Mon Dec 16 13:54:30 2013 [VMM][I]: Command execution fail: cat << EOT |
>>>> /var/tmp/one/vmm/kvm/deploy '/var/lib/one//datastores/0/0/deployment.0'
>>>> '192.168.0.21' 0 192.168.0.21
>>>> Mon Dec 16 13:54:30 2013 [VMM][I]: error: Failed to create domain from
>>>> /var/lib/one//datastores/0/0/deployment.0
>>>> Mon Dec 16 13:54:30 2013 [VMM][I]: error: Unable to add bridge eth0
>>>> port vnet0: Operation not supported
>>>> Mon Dec 16 13:54:30 2013 [VMM][E]: Could not create domain from
>>>> /var/lib/one//datastores/0/0/deployment.0
>>>> Mon Dec 16 13:54:30 2013 [VMM][I]: ExitCode: 255
>>>> Mon Dec 16 13:54:30 2013 [VMM][I]: Failed to execute virtualization
>>>> driver operation: deploy.
>>>> Mon Dec 16 13:54:30 2013 [VMM][E]: Error deploying virtual machine:
>>>> Could not create domain from /var/lib/one//datastores/0/0/deployment.0
>>>>
>>>> I have checked the mailing list and a few forums but haven't found
>>>> much for my case.
>>>> I am running NFS underneath, but only what the tutorial mentions.
>>>>
>>>>
>>>> _______________________________________________
>>>> Users mailing listUsers at lists.opennebula.orghttp://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>>>
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at lists.opennebula.org
>>>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>>>
>>>>
>>>
>>>
>>> --
>>> Alexander Sibetheros
>>>
>>>
>>>
>>>
>>
>>
>> --
>> Alexander Sibetheros
>>
>
>
>
> --
> Alexander Sibetheros
>
--
Alexander Sibetheros
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20131217/b712fa66/attachment-0002.htm>
More information about the Users
mailing list