[one-users] Onevm in Failed state

Carlos Martín Sánchez cmartin at opennebula.org
Wed Apr 17 09:53:36 PDT 2013 

Can you doble-check that? I can only see ttylinux appliances for kvm and
vmware.

--
Carlos Martín, MSc
Project Engineer
OpenNebula - The Open-source Solution for Data Center Virtualization
www.OpenNebula.org | cmartin at opennebula.org |
@OpenNebula<http://twitter.com/opennebula><cmartin at opennebula.org>


On Wed, Apr 17, 2013 at 6:38 PM, Preetham Nagaraju <
preetham.nagaraju at gmail.com> wrote:

> Hi,
>
> But i am importing the ttylinux-xen image only from Marketplace......
>
>
> On Wed, Apr 17, 2013 at 9:12 PM, Carlos Martín Sánchez <
> cmartin at opennebula.org> wrote:
>
>> Hi,
>>
>> OpenNebula will not convert the KVM ttylinux VM to a Xen ready VM. You
>> need to create or import a xen-ready VM.
>>
>> Regards
>>
>> --
>> Carlos Martín, MSc
>> Project Engineer
>> OpenNebula - The Open-source Solution for Data Center Virtualization
>> www.OpenNebula.org | cmartin at opennebula.org | @OpenNebula<http://twitter.com/opennebula><cmartin at opennebula.org>
>>
>>
>> On Wed, Apr 17, 2013 at 4:15 PM, Preetham Nagaraju <
>> preetham.nagaraju at gmail.com> wrote:
>>
>>> *Hi Sir,*
>>>
>>> Firstly, i have installed *Opennebula 3.9.80 on Ubuntu 12.04 OS which
>>> has KVM hypervisor* in it. I am using this machine as *both Fontend &
>>> Host/Node* machine. In this, Opennebula is working fine & the same m/c
>>> as node/host is also working fine i.e this host m/c in opennebula is in
>>> *"ON"* state.
>>>
>>> Further i have another host m/c i.e *2nd host m/c which has Ubuntu12.04
>>> OS with XEN hypervisor*.. From the 1st m/c i can ssh passwordless to
>>> 2nd m/c & vice-versa and also automount from 1st m/c to 2nd m/c.... This
>>> 2nd host m/c is also added successfully to opennebula and it is also in
>>> *"ON"* state....
>>>
>>> *oneadmin at opennebula:~$* *onehost list*
>>>
>>>   ID NAME            CLUSTER   RVM      ALLOCATED_CPU      ALLOCATED_MEM
>>> STAT
>>>    8 opennebula      -           0       0 / 200 (0%)   0K / 991.8M (0%)
>>> on                        -----------------   1st host m/c(KVM)
>>>   16 node1           -           0       0 / 200 (0%)       0K / 2G (0%)
>>> on                            -----------------   2nd host m/c(XEN)
>>>
>>> After adding the host m/c's, further for creating VM's firstly i
>>> imported the ttylinux (for eg.) from "Marketplace" and when it came to
>>> "Ready" state, created the "Template".....
>>>
>>> *oneadmin at opennebula:~$ onetemplate list*
>>>   ID USER            GROUP           NAME
>>> REGTIME
>>>    4 oneadmin        oneadmin        tty-linux                    04/16
>>> 11:22:24
>>>
>>> After creating the template, gave "Instantiate" and selected the created
>>> template and gave No. vm's to deploy as 2...
>>> VM's got created but the VM in the 2nd host m/c is in *"Fail"* state
>>> whereas the VM in the 1st host m/c is in "Running" state....
>>>
>>> *oneadmin at opennebula:~$ onevm list*
>>>     ID USER     GROUP    NAME            STAT UCPU    UMEM
>>> HOST             TIME
>>>     10 oneadmin oneadmin ttylinux-vm     fail    0      0K
>>> 0d 00h00                  -----------------   2nd host m/c(XEN)
>>>
>>>      11 oneadmin oneadmin ttylinux-vm     runn    0      0K
>>> opennebula   0d 00h00         -----------------   1st host m/c(KVM)
>>>
>>> Sir, please guide me where i have done mistake or gone wrong from the
>>> above, and help me out to come out from vm "Failed" state in the 2nd host
>>> m/c which has XEN hypervisor in it.....
>>>
>>> Sir, i have also updated the "sudoers" in the opennebula m/c i.e 1st
>>> host m/c and also in the 2nd host m/c... with giving all privileges....
>>>
>>> *%oneadmin    ALL=(ALL)   NOPASSWD: ALL
>>>
>>> %xen ALL=(ALL) NOPASSWD: /usr/sbin/xm *
>>> **%xen ALL=(ALL) NOPASSWD: /usr/sbin/xentop **
>>> *
>>> *
>>> And also have "uncommented" the drivers line in oned.config file for
>>> both KVM & XEN with dummy also.....
>>> *
>>> *
>>> Sir, please find the logs in the attachment.....
>>>
>>>
>>> On Wed, Apr 17, 2013 at 2:55 PM, Carlos Martín Sánchez <
>>> cmartin at opennebula.org> wrote:
>>>
>>>> Hi,
>>>>
>>>> You may find the reason in the opennebula logs, see
>>>> /var/log/one/oned.log and vm-id.log; or in the xen logs in the host.
>>>> But if I understood your configuration, you are trying to run a KVM
>>>> machine on Xen.
>>>>
>>>> Regards
>>>>
>>>> --
>>>> Carlos Martín, MSc
>>>> Project Engineer
>>>> OpenNebula - The Open-source Solution for Data Center Virtualization
>>>> www.OpenNebula.org | cmartin at opennebula.org | @OpenNebula<http://twitter.com/opennebula><cmartin at opennebula.org>
>>>>
>>>>
>>>> On Mon, Apr 15, 2013 at 11:26 AM, Preetham Nagaraju <
>>>> preetham.nagaraju at gmail.com> wrote:
>>>>
>>>>> Hi Sir,
>>>>>
>>>>> Now i have added two host machines to Opennebula. First host m/c is
>>>>> the opennebula frontend itself and the other m/c which has Ubuntu 12.04 &
>>>>> XEN hypervisor in it.... Both the host's are in "Running" i.e "ON" state...
>>>>>
>>>>> Then i am trying to create VM in these host m/c's. After uploading
>>>>> image & creating template, if i give "Instantiate" and give no. of deploy
>>>>> vm as :- 2 , two vm's must be created!!!!!
>>>>>
>>>>> *2 vm's are creating in two host m/c's* but the *vm in the second node
>>>>> * i.e Ubuntu 12.04 with XEN which is other than opennebula frontend
>>>>> m/c is going to *"FAILED" state,* but the vm created in the
>>>>> opennebula frontend m/c i.e first host, is in "RUNNING" state....
>>>>>
>>>>> From the frontend m/c i can ssh passwordless to the second m/c and
>>>>> vice-versa also successfully....
>>>>>
>>>>> sir please help me how to get the vm in "RUNNING" state in the 2nd
>>>>> m/c...
>>>>>
>>>>>
>>>>> On Thu, Mar 14, 2013 at 11:27 PM, Preetham Nagaraju <
>>>>> preetham.nagaraju at gmail.com> wrote:
>>>>>
>>>>>> for (1) VNC viewer on local pc means on the host machine sir....if it
>>>>>> is so then i haven't installed VNC viewer on host machine, at the time of
>>>>>> installing openneula i installed noVNC_gems tat's all....
>>>>>>
>>>>>> for (2), i will run that command after creating vm, but i have doubt
>>>>>> that since we are creating the vm from template whether it can store the vm
>>>>>> or it will get deleted after the vm is shutdown... that's the behaviour of
>>>>>> vm after creating it by template right sir!!!!!
>>>>>>
>>>>>>
>>>>>> On Thu, Mar 14, 2013 at 11:17 PM, Tobias Honacker <
>>>>>> t.honacker at googlemail.com> wrote:
>>>>>>
>>>>>>>  Hi,
>>>>>>>
>>>>>>> --> 2. After creating the VM and the OS is installed run sudo
>>>>>>> apt-get install acpid on it (VM)
>>>>>>> --> 1. did you install any VNC viewer on your local pc?
>>>>>>>
>>>>>>>
>>>>>>> Best regards,
>>>>>>> Tobias
>>>>>>>
>>>>>>> Am 14.03.2013 18:28, schrieb Preetham Nagaraju:
>>>>>>>
>>>>>>> Hi sir,
>>>>>>>
>>>>>>>           i think for my first question (1) i need to make
>>>>>>> clear.... Desktop means not the desktop version of Ubuntu OS, now i am able
>>>>>>> to access the vm in command line's and not in the GUI mode..... i am able
>>>>>>> to host vm, but it is opening in command line mode and not in the gui.....
>>>>>>>
>>>>>>>  and also for the reply by you for (2)  "sudo apt-get install
>>>>>>> acpid" i need to run this command in the host machine or after creating the
>>>>>>> vm i need to run this command....????
>>>>>>>
>>>>>>> On Thu, Mar 14, 2013 at 10:26 PM, Tobias Honacker <
>>>>>>> t.honacker at googlemail.com> wrote:
>>>>>>>
>>>>>>>>  Hi,
>>>>>>>>
>>>>>>>>  --> 1. You have to download Ubuntu Desktop ISO  to run Desktop
>>>>>>>> after the installation is done
>>>>>>>> Never installed any desktop on my servers yet but you can try this
>>>>>>>> link [1].
>>>>>>>>
>>>>>>>>  --> 2. Not 100% sure but try to update the template and shutdown
>>>>>>>> the vm so changes can take effect. If not deploy a new VM.
>>>>>>>> Also install the acpi daemon on your VM:
>>>>>>>> sudo apt-get install acpid
>>>>>>>>
>>>>>>>>  This should help.
>>>>>>>>
>>>>>>>>  Best regards,
>>>>>>>> Tobias
>>>>>>>>
>>>>>>>>  [1]
>>>>>>>> http://www.filiwiese.com/installing-gnome-on-ubuntu-12-04-precise-pangolin/
>>>>>>>>
>>>>>>>>
>>>>>>>>   Von: Preetham Nagaraju <preetham.nagaraju at gmail.com>
>>>>>>>> Datum: Donnerstag, 14. März 2013 17:14
>>>>>>>>
>>>>>>>> An: Tobias Honacker <t.honacker at googlemail.com>
>>>>>>>> Cc: <users at lists.opennebula.org>, <users-owner at lists.opennebula.org
>>>>>>>> >
>>>>>>>> Betreff: Re: [one-users] Onevm in Failed state
>>>>>>>>
>>>>>>>>  i installed Ubuntu 12.04 OS......
>>>>>>>>
>>>>>>>>  for 2) is it ok now to go to the created template and click
>>>>>>>> update properties and edit the features given by you there directly????
>>>>>>>>
>>>>>>>> On Thu, Mar 14, 2013 at 9:40 PM, Tobias Honacker <
>>>>>>>> t.honacker at googlemail.com> wrote:
>>>>>>>>
>>>>>>>>>  Hi,
>>>>>>>>>
>>>>>>>>>  --> 1. which OS did you install?
>>>>>>>>> --> 2. Try to enable ACPI in the feature section when you create a
>>>>>>>>> template or update your template with:
>>>>>>>>> FEATURES=[
>>>>>>>>>   ACPI="yes" ]
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>  Best regards,
>>>>>>>>> Tobias
>>>>>>>>>
>>>>>>>>>   Von: Preetham Nagaraju <preetham.nagaraju at gmail.com>
>>>>>>>>> Datum: Donnerstag, 14. März 2013 16:54
>>>>>>>>> An: Tobias Honacker <t.honacker at googlemail.com>
>>>>>>>>> Cc: <users at lists.opennebula.org>, <
>>>>>>>>> users-owner at lists.opennebula.org>
>>>>>>>>> Betreff: Re: [one-users] Onevm in Failed state
>>>>>>>>>
>>>>>>>>>  Hi Sir,
>>>>>>>>>
>>>>>>>>>  You were right, it was the bridge problem..... I sorted it
>>>>>>>>> out.... Now i am able to create VM successfully... It is in "running"
>>>>>>>>> state......
>>>>>>>>>
>>>>>>>>>  Sir after running the vm, we click on vnc to open a new tab of
>>>>>>>>> created vm and first it asks for installing OS.... i proceeded with all
>>>>>>>>> that and got successfully installed the OS.... But the vm is in *"CLI"
>>>>>>>>> mode* and not in the desktop or graphics mode......
>>>>>>>>>
>>>>>>>>>  *Could you please guide:*-
>>>>>>>>> 1. how to open the *VM in graphics mode* with the desktop view andnotthis CLI mode......
>>>>>>>>>    2. If we *shutdown the vm not able to start it again.*... i
>>>>>>>>> need to cancel it and start instantiate again the template which will give
>>>>>>>>> new vm and start installing os again.... how to shutdown created vm and
>>>>>>>>> start back again?????
>>>>>>>>>
>>>>>>>>>   On Thu, Mar 14, 2013 at 4:40 PM, Tobias Honacker <
>>>>>>>>> t.honacker at googlemail.com> wrote:
>>>>>>>>>
>>>>>>>>>>   Hi,
>>>>>>>>>>
>>>>>>>>>>  Did u create a bridge named "br0"?
>>>>>>>>>> Please provide the output of ifconfig –a
>>>>>>>>>>
>>>>>>>>>>  It could also be a permission problem, follow these guide [1]
>>>>>>>>>> and provide us the output of:
>>>>>>>>>>
>>>>>>>>>>  grep -vE '^($|#)' /etc/libvirt/qemu.conf
>>>>>>>>>> grep -vE '^($|#)' /etc/libvirt/libvirtd.conf
>>>>>>>>>> cat /var/lib/one/var/datastores/0/10/deployment.1
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>  Best regards,
>>>>>>>>>>  Tobias
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>     Von: Preetham Nagaraju <preetham.nagaraju at gmail.com>
>>>>>>>>>> Datum: Donnerstag, 14. März 2013 12:01
>>>>>>>>>> An: <users at lists.opennebula.org>, <
>>>>>>>>>> users-owner at lists.opennebula.org>
>>>>>>>>>> Betreff: [one-users] Onevm in Failed state
>>>>>>>>>>
>>>>>>>>>>  Hi
>>>>>>>>>>
>>>>>>>>>>       I am using Opennebula 3.8.3 on Ubuntu with KVM hypervisor
>>>>>>>>>> in it.
>>>>>>>>>> I added the host successfully, and created the image and template.
>>>>>>>>>>
>>>>>>>>>> But the virtual machine starts with pending, prolog , boot and
>>>>>>>>>> then goes to failed state......
>>>>>>>>>>
>>>>>>>>>> Please get me out of this failed state.......
>>>>>>>>>>
>>>>>>>>>> VM information is as follows:-
>>>>>>>>>>
>>>>>>>>>>   Virtual Machine information - one-10   ID 10  Name one-10
>>>>>>>>>> Owner preetham  Group users  State FAILED  LCM State LCM_INIT
>>>>>>>>>> Host --  Start time 16:02:14 03/14/2013  Deploy ID -  Permissions
>>>>>>>>>>        Owner um-       Group ---       Other ---    Monitoring
>>>>>>>>>> information   Net_TX 0  Net_RX 0  Used Memory 0K  Used CPU 0  VNC
>>>>>>>>>> Session [image: VNC Disabled]
>>>>>>>>>> My Vm template is as follows:-
>>>>>>>>>>  VM template   VCPU 1  NIC
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>   MAC 02:00:c0:a8:96:67  NETWORK_ID 1  VLAN NO  NETWORK_UNAME
>>>>>>>>>> oneadmin  BRIDGE br0  NETWORK localhost  IP 192.168.150.103
>>>>>>>>>>
>>>>>>>>>>   ERROR
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>   TIMESTAMP Thu Mar 14 16:16:41 2013  MESSAGE Error deploying
>>>>>>>>>> virtual machine: Could not create domain from
>>>>>>>>>> /var/lib/one/var//datastores/0/10/deployment.1
>>>>>>>>>>
>>>>>>>>>>   VMID 10  RAW
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>   TYPE kvm
>>>>>>>>>>
>>>>>>>>>>   NAME one-10  DISK
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>   0
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>   DATASTORE user_ds  TYPE CDROM  TARGET hdb  SAVE NO  IMAGE
>>>>>>>>>> cd-Ubuntu-precise  DISK_ID 0  DEV_PREFIX hd  CLONE YES  SOURCE
>>>>>>>>>> /var/lib/one/var/datastores/100/c2d97c815b985bece0b710a0675d1bb9
>>>>>>>>>> IMAGE_UNAME preetham  IMAGE_ID 11  READONLY YES  TM_MAD shared
>>>>>>>>>> DATASTORE_ID 100
>>>>>>>>>>
>>>>>>>>>>   1
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>   DATASTORE user_ds  TYPE FILE  TARGET hda  SAVE YES  PERSISTENT
>>>>>>>>>> YES  IMAGE Ubuntu-precise  DISK_ID 1  DEV_PREFIX hd  CLONE NO
>>>>>>>>>> SOURCE
>>>>>>>>>> /var/lib/one/var/datastores/100/c1e8082f7e34c0cc91254c086f9b72de
>>>>>>>>>> IMAGE_UNAME preetham  IMAGE_ID 12  READONLY NO  TM_MAD shared
>>>>>>>>>> DATASTORE_ID 100
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>   OS
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>   ARCH x86_64  BOOT cdrom
>>>>>>>>>>
>>>>>>>>>>   MEMORY 1024  CPU 1  TEMPLATE_ID 11  GRAPHICS
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>   TYPE vnc  PORT 5910  KEYMAP es
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> My vm log is as follows:-
>>>>>>>>>>
>>>>>>>>>> Thu Mar 14 16:02:37 2013 [DiM][I]: New VM state is ACTIVE.
>>>>>>>>>> Thu Mar 14 16:02:37 2013 [LCM][I]: New VM state is PROLOG.
>>>>>>>>>> Thu Mar 14 16:02:37 2013 [VM][I]: Virtual Machine has no context
>>>>>>>>>> Thu Mar 14 16:03:08 2013 [TM][I]: clone: Cloning /var/lib/one/var/datastores/100/c2d97c815b985bece0b710a0675d1bb9 in opennebula:/var/lib/one/var//datastores/0/10/disk.0
>>>>>>>>>> Thu Mar 14 16:03:08 2013 [TM][I]: ExitCode: 0
>>>>>>>>>> Thu Mar 14 16:03:09 2013 [TM][I]: ln: Linking /var/lib/one/var/datastores/100/c1e8082f7e34c0cc91254c086f9b72de in opennebula:/var/lib/one/var//datastores/0/10/disk.1
>>>>>>>>>> Thu Mar 14 16:03:09 2013 [TM][I]: ExitCode: 0
>>>>>>>>>> Thu Mar 14 16:03:09 2013 [LCM][I]: New VM state is BOOT
>>>>>>>>>> Thu Mar 14 16:03:09 2013 [VMM][I]: Generating deployment file: /var/lib/one/var/vms/10/deployment.0
>>>>>>>>>> Thu Mar 14 16:03:10 2013 [VMM][I]: ExitCode: 0
>>>>>>>>>> Thu Mar 14 16:03:10 2013 [VMM][I]: Successfully execute network driver operation: pre.
>>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: Command execution fail: cat << EOT | /var/tmp/one/vmm/kvm/deploy /var/lib/one/var//datastores/0/10/deployment.0 opennebula 10 opennebula
>>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: error: Failed to create domain from /var/lib/one/var//datastores/0/10/deployment.0
>>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: error: Cannot get interface MTU on 'br0': No such deviceThu Mar 14 16:03:13 2013 [VMM][E]: Could not create domain from /var/lib/one/var//datastores/0/10/deployment.0
>>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: ExitCode: 255
>>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: Failed to execute virtualization driver operation: deploy.Thu Mar 14 16:03:13 2013 [VMM][E]: Error deploying virtual machine: Could not create domain from /var/lib/one/var//datastores/0/10/deployment.0
>>>>>>>>>> Thu Mar 14 16:03:13 2013 [DiM][I]: New VM state is FAILED
>>>>>>>>>> Thu Mar 14 16:16:04 2013 [DiM][I]: New VM state is CLEANUP.
>>>>>>>>>> Thu Mar 14 16:16:04 2013 [TM][I]: delete: Deleting /var/lib/one/var/datastores/0/10/disk.0
>>>>>>>>>> Thu Mar 14 16:16:04 2013 [TM][I]: ExitCode: 0
>>>>>>>>>> Thu Mar 14 16:16:04 2013 [TM][I]: delete: Deleting /var/lib/one/var/datastores/0/10/disk.1
>>>>>>>>>> Thu Mar 14 16:16:04 2013 [TM][I]: ExitCode: 0
>>>>>>>>>> Thu Mar 14 16:16:05 2013 [TM][I]: delete: Deleting /var/lib/one/var/datastores/0/10
>>>>>>>>>> Thu Mar 14 16:16:05 2013 [TM][I]: ExitCode: 0
>>>>>>>>>> Thu Mar 14 16:16:05 2013 [DiM][I]: New VM state is PENDING
>>>>>>>>>> Thu Mar 14 16:16:10 2013 [DiM][I]: New VM state is ACTIVE.
>>>>>>>>>> Thu Mar 14 16:16:10 2013 [LCM][I]: New VM state is PROLOG.
>>>>>>>>>> Thu Mar 14 16:16:10 2013 [VM][I]: Virtual Machine has no context
>>>>>>>>>> Thu Mar 14 16:16:36 2013 [TM][I]: clone: Cloning /var/lib/one/var/datastores/100/c2d97c815b985bece0b710a0675d1bb9 in opennebula:/var/lib/one/var//datastores/0/10/disk.0
>>>>>>>>>> Thu Mar 14 16:16:36 2013 [TM][I]: ExitCode: 0
>>>>>>>>>> Thu Mar 14 16:16:38 2013 [TM][I]: ln: Linking /var/lib/one/var/datastores/100/c1e8082f7e34c0cc91254c086f9b72de in opennebula:/var/lib/one/var//datastores/0/10/disk.1
>>>>>>>>>> Thu Mar 14 16:16:38 2013 [TM][I]: ExitCode: 0
>>>>>>>>>> Thu Mar 14 16:16:38 2013 [LCM][I]: New VM state is BOOT
>>>>>>>>>> Thu Mar 14 16:16:38 2013 [VMM][I]: Generating deployment file: /var/lib/one/var/vms/10/deployment.1
>>>>>>>>>> Thu Mar 14 16:16:39 2013 [VMM][I]: ExitCode: 0
>>>>>>>>>> Thu Mar 14 16:16:39 2013 [VMM][I]: Successfully execute network driver operation: pre.
>>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: Command execution fail: cat << EOT | /var/tmp/one/vmm/kvm/deploy /var/lib/one/var//datastores/0/10/deployment.1 opennebula 10 opennebula
>>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: error: Failed to create domain from /var/lib/one/var//datastores/0/10/deployment.1
>>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: error: Cannot get interface MTU on 'br0': No such deviceThu Mar 14 16:16:41 2013 [VMM][E]: Could not create domain from /var/lib/one/var//datastores/0/10/deployment.1
>>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: ExitCode: 255
>>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: Failed to execute virtualization driver operation: deploy.Thu Mar 14 16:16:41 2013 [VMM][E]: Error deploying virtual machine: Could not create domain from /var/lib/one/var//datastores/0/10/deployment.1
>>>>>>>>>> Thu Mar 14 16:16:41 2013 [DiM][I]: New VM state is FAILED
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> *Regards,***
>>>>>>>>>>
>>>>>>>>>> *Preetham. N*
>>>>>>>>>>
>>>>>>>>>> *
>>>>>>>>>> *
>>>>>>>>>>  *
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> *
>>>>>>>>>>   _______________________________________________ Users mailing
>>>>>>>>>> list Users at lists.opennebula.org
>>>>>>>>>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>  --
>>>>>>>>>
>>>>>>>>> *?** Regards,***
>>>>>>>>>
>>>>>>>>> *Preetham. N*
>>>>>>>>>
>>>>>>>>> *9945072638*
>>>>>>>>>  *
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> *
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>  --
>>>>>>>>
>>>>>>>> *?** Regards,***
>>>>>>>>
>>>>>>>> *Preetham. N*
>>>>>>>>
>>>>>>>> *9945072638*
>>>>>>>>  *
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> *
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>  --
>>>>>>>
>>>>>>> *?** Regards,***
>>>>>>>
>>>>>>> *Preetham. N*
>>>>>>>
>>>>>>> *9945072638*
>>>>>>>  *
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> *
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>>
>>>>>> *?** Regards,***
>>>>>>
>>>>>> *Preetham. N*
>>>>>>
>>>>>> *9945072638*
>>>>>> *
>>>>>>
>>>>>>
>>>>>>
>>>>>> *
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>>
>>>>> *?** Regards,***
>>>>>
>>>>> *Preetham. N*
>>>>>
>>>>> *9945072638*
>>>>> *
>>>>>
>>>>>
>>>>>
>>>>> *
>>>>>
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users at lists.opennebula.org
>>>>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>>>>
>>>>>
>>>>
>>>
>>>
>>> --
>>>
>>> *?** Regards,***
>>>
>>> *Preetham. N*
>>>
>>> *9945072638*
>>> *
>>>
>>>
>>>
>>> *
>>>
>>
>>
>
>
> --
>
> *?** Regards,***
>
> *Preetham. N*
>
> *9945072638*
> *
>
>
>
> *
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20130417/383c1ce0/attachment-0002.htm>

More information about the Users mailing list