[one-users] Onevm in Failed state

Preetham Nagaraju preetham.nagaraju at gmail.com
Wed Apr 17 09:38:04 PDT 2013 

Hi,

But i am importing the ttylinux-xen image only from Marketplace......


On Wed, Apr 17, 2013 at 9:12 PM, Carlos Martín Sánchez <
cmartin at opennebula.org> wrote:

> Hi,
>
> OpenNebula will not convert the KVM ttylinux VM to a Xen ready VM. You
> need to create or import a xen-ready VM.
>
> Regards
>
> --
> Carlos Martín, MSc
> Project Engineer
> OpenNebula - The Open-source Solution for Data Center Virtualization
> www.OpenNebula.org | cmartin at opennebula.org | @OpenNebula<http://twitter.com/opennebula><cmartin at opennebula.org>
>
>
> On Wed, Apr 17, 2013 at 4:15 PM, Preetham Nagaraju <
> preetham.nagaraju at gmail.com> wrote:
>
>> *Hi Sir,*
>>
>> Firstly, i have installed *Opennebula 3.9.80 on Ubuntu 12.04 OS which
>> has KVM hypervisor* in it. I am using this machine as *both Fontend &
>> Host/Node* machine. In this, Opennebula is working fine & the same m/c
>> as node/host is also working fine i.e this host m/c in opennebula is in *
>> "ON"* state.
>>
>> Further i have another host m/c i.e *2nd host m/c which has Ubuntu12.04
>> OS with XEN hypervisor*.. From the 1st m/c i can ssh passwordless to 2nd
>> m/c & vice-versa and also automount from 1st m/c to 2nd m/c.... This 2nd
>> host m/c is also added successfully to opennebula and it is also in *"ON"
>> * state....
>>
>> *oneadmin at opennebula:~$* *onehost list*
>>
>>   ID NAME            CLUSTER   RVM      ALLOCATED_CPU      ALLOCATED_MEM
>> STAT
>>    8 opennebula      -           0       0 / 200 (0%)   0K / 991.8M (0%)
>> on                        -----------------   1st host m/c(KVM)
>>   16 node1           -           0       0 / 200 (0%)       0K / 2G (0%)
>> on                            -----------------   2nd host m/c(XEN)
>>
>> After adding the host m/c's, further for creating VM's firstly i imported
>> the ttylinux (for eg.) from "Marketplace" and when it came to "Ready"
>> state, created the "Template".....
>>
>> *oneadmin at opennebula:~$ onetemplate list*
>>   ID USER            GROUP           NAME
>> REGTIME
>>    4 oneadmin        oneadmin        tty-linux                    04/16
>> 11:22:24
>>
>> After creating the template, gave "Instantiate" and selected the created
>> template and gave No. vm's to deploy as 2...
>> VM's got created but the VM in the 2nd host m/c is in *"Fail"* state
>> whereas the VM in the 1st host m/c is in "Running" state....
>>
>> *oneadmin at opennebula:~$ onevm list*
>>     ID USER     GROUP    NAME            STAT UCPU    UMEM
>> HOST             TIME
>>     10 oneadmin oneadmin ttylinux-vm     fail    0      0K
>> 0d 00h00                  -----------------   2nd host m/c(XEN)
>>
>>      11 oneadmin oneadmin ttylinux-vm     runn    0      0K opennebula
>> 0d 00h00         -----------------   1st host m/c(KVM)
>>
>> Sir, please guide me where i have done mistake or gone wrong from the
>> above, and help me out to come out from vm "Failed" state in the 2nd host
>> m/c which has XEN hypervisor in it.....
>>
>> Sir, i have also updated the "sudoers" in the opennebula m/c i.e 1st host
>> m/c and also in the 2nd host m/c... with giving all privileges....
>>
>> *%oneadmin    ALL=(ALL)   NOPASSWD: ALL
>>
>> %xen ALL=(ALL) NOPASSWD: /usr/sbin/xm *
>> **%xen ALL=(ALL) NOPASSWD: /usr/sbin/xentop **
>> *
>> *
>> And also have "uncommented" the drivers line in oned.config file for both
>> KVM & XEN with dummy also.....
>> *
>> *
>> Sir, please find the logs in the attachment.....
>>
>>
>> On Wed, Apr 17, 2013 at 2:55 PM, Carlos Martín Sánchez <
>> cmartin at opennebula.org> wrote:
>>
>>> Hi,
>>>
>>> You may find the reason in the opennebula logs, see
>>> /var/log/one/oned.log and vm-id.log; or in the xen logs in the host.
>>> But if I understood your configuration, you are trying to run a KVM
>>> machine on Xen.
>>>
>>> Regards
>>>
>>> --
>>> Carlos Martín, MSc
>>> Project Engineer
>>> OpenNebula - The Open-source Solution for Data Center Virtualization
>>> www.OpenNebula.org | cmartin at opennebula.org | @OpenNebula<http://twitter.com/opennebula><cmartin at opennebula.org>
>>>
>>>
>>> On Mon, Apr 15, 2013 at 11:26 AM, Preetham Nagaraju <
>>> preetham.nagaraju at gmail.com> wrote:
>>>
>>>> Hi Sir,
>>>>
>>>> Now i have added two host machines to Opennebula. First host m/c is the
>>>> opennebula frontend itself and the other m/c which has Ubuntu 12.04 & XEN
>>>> hypervisor in it.... Both the host's are in "Running" i.e "ON" state...
>>>>
>>>> Then i am trying to create VM in these host m/c's. After uploading
>>>> image & creating template, if i give "Instantiate" and give no. of deploy
>>>> vm as :- 2 , two vm's must be created!!!!!
>>>>
>>>> *2 vm's are creating in two host m/c's* but the *vm in the second node*i.e Ubuntu 12.04 with XEN which is other than opennebula frontend m/c is
>>>> going to *"FAILED" state,* but the vm created in the opennebula
>>>> frontend m/c i.e first host, is in "RUNNING" state....
>>>>
>>>> From the frontend m/c i can ssh passwordless to the second m/c and
>>>> vice-versa also successfully....
>>>>
>>>> sir please help me how to get the vm in "RUNNING" state in the 2nd
>>>> m/c...
>>>>
>>>>
>>>> On Thu, Mar 14, 2013 at 11:27 PM, Preetham Nagaraju <
>>>> preetham.nagaraju at gmail.com> wrote:
>>>>
>>>>> for (1) VNC viewer on local pc means on the host machine sir....if it
>>>>> is so then i haven't installed VNC viewer on host machine, at the time of
>>>>> installing openneula i installed noVNC_gems tat's all....
>>>>>
>>>>> for (2), i will run that command after creating vm, but i have doubt
>>>>> that since we are creating the vm from template whether it can store the vm
>>>>> or it will get deleted after the vm is shutdown... that's the behaviour of
>>>>> vm after creating it by template right sir!!!!!
>>>>>
>>>>>
>>>>> On Thu, Mar 14, 2013 at 11:17 PM, Tobias Honacker <
>>>>> t.honacker at googlemail.com> wrote:
>>>>>
>>>>>>  Hi,
>>>>>>
>>>>>> --> 2. After creating the VM and the OS is installed run sudo
>>>>>> apt-get install acpid on it (VM)
>>>>>> --> 1. did you install any VNC viewer on your local pc?
>>>>>>
>>>>>>
>>>>>> Best regards,
>>>>>> Tobias
>>>>>>
>>>>>> Am 14.03.2013 18:28, schrieb Preetham Nagaraju:
>>>>>>
>>>>>> Hi sir,
>>>>>>
>>>>>>           i think for my first question (1) i need to make clear....
>>>>>> Desktop means not the desktop version of Ubuntu OS, now i am able to access
>>>>>> the vm in command line's and not in the GUI mode..... i am able to host vm,
>>>>>> but it is opening in command line mode and not in the gui.....
>>>>>>
>>>>>>  and also for the reply by you for (2)  "sudo apt-get install acpid"
>>>>>> i need to run this command in the host machine or after creating the vm i
>>>>>> need to run this command....????
>>>>>>
>>>>>> On Thu, Mar 14, 2013 at 10:26 PM, Tobias Honacker <
>>>>>> t.honacker at googlemail.com> wrote:
>>>>>>
>>>>>>>  Hi,
>>>>>>>
>>>>>>>  --> 1. You have to download Ubuntu Desktop ISO  to run Desktop
>>>>>>> after the installation is done
>>>>>>> Never installed any desktop on my servers yet but you can try this
>>>>>>> link [1].
>>>>>>>
>>>>>>>  --> 2. Not 100% sure but try to update the template and shutdown
>>>>>>> the vm so changes can take effect. If not deploy a new VM.
>>>>>>> Also install the acpi daemon on your VM:
>>>>>>> sudo apt-get install acpid
>>>>>>>
>>>>>>>  This should help.
>>>>>>>
>>>>>>>  Best regards,
>>>>>>> Tobias
>>>>>>>
>>>>>>>  [1]
>>>>>>> http://www.filiwiese.com/installing-gnome-on-ubuntu-12-04-precise-pangolin/
>>>>>>>
>>>>>>>
>>>>>>>   Von: Preetham Nagaraju <preetham.nagaraju at gmail.com>
>>>>>>> Datum: Donnerstag, 14. März 2013 17:14
>>>>>>>
>>>>>>> An: Tobias Honacker <t.honacker at googlemail.com>
>>>>>>> Cc: <users at lists.opennebula.org>, <users-owner at lists.opennebula.org>
>>>>>>> Betreff: Re: [one-users] Onevm in Failed state
>>>>>>>
>>>>>>>  i installed Ubuntu 12.04 OS......
>>>>>>>
>>>>>>>  for 2) is it ok now to go to the created template and click update
>>>>>>> properties and edit the features given by you there directly????
>>>>>>>
>>>>>>> On Thu, Mar 14, 2013 at 9:40 PM, Tobias Honacker <
>>>>>>> t.honacker at googlemail.com> wrote:
>>>>>>>
>>>>>>>>  Hi,
>>>>>>>>
>>>>>>>>  --> 1. which OS did you install?
>>>>>>>> --> 2. Try to enable ACPI in the feature section when you create a
>>>>>>>> template or update your template with:
>>>>>>>> FEATURES=[
>>>>>>>>   ACPI="yes" ]
>>>>>>>>
>>>>>>>>
>>>>>>>>  Best regards,
>>>>>>>> Tobias
>>>>>>>>
>>>>>>>>   Von: Preetham Nagaraju <preetham.nagaraju at gmail.com>
>>>>>>>> Datum: Donnerstag, 14. März 2013 16:54
>>>>>>>> An: Tobias Honacker <t.honacker at googlemail.com>
>>>>>>>> Cc: <users at lists.opennebula.org>, <users-owner at lists.opennebula.org
>>>>>>>> >
>>>>>>>> Betreff: Re: [one-users] Onevm in Failed state
>>>>>>>>
>>>>>>>>  Hi Sir,
>>>>>>>>
>>>>>>>>  You were right, it was the bridge problem..... I sorted it
>>>>>>>> out.... Now i am able to create VM successfully... It is in "running"
>>>>>>>> state......
>>>>>>>>
>>>>>>>>  Sir after running the vm, we click on vnc to open a new tab of
>>>>>>>> created vm and first it asks for installing OS.... i proceeded with all
>>>>>>>> that and got successfully installed the OS.... But the vm is in *"CLI"
>>>>>>>> mode* and not in the desktop or graphics mode......
>>>>>>>>
>>>>>>>>  *Could you please guide:*-
>>>>>>>> 1. how to open the *VM in graphics mode* with the desktop view andnotthis CLI mode......
>>>>>>>>    2. If we *shutdown the vm not able to start it again.*... i
>>>>>>>> need to cancel it and start instantiate again the template which will give
>>>>>>>> new vm and start installing os again.... how to shutdown created vm and
>>>>>>>> start back again?????
>>>>>>>>
>>>>>>>>   On Thu, Mar 14, 2013 at 4:40 PM, Tobias Honacker <
>>>>>>>> t.honacker at googlemail.com> wrote:
>>>>>>>>
>>>>>>>>>   Hi,
>>>>>>>>>
>>>>>>>>>  Did u create a bridge named "br0"?
>>>>>>>>> Please provide the output of ifconfig –a
>>>>>>>>>
>>>>>>>>>  It could also be a permission problem, follow these guide [1]
>>>>>>>>> and provide us the output of:
>>>>>>>>>
>>>>>>>>>  grep -vE '^($|#)' /etc/libvirt/qemu.conf
>>>>>>>>> grep -vE '^($|#)' /etc/libvirt/libvirtd.conf
>>>>>>>>> cat /var/lib/one/var/datastores/0/10/deployment.1
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>  Best regards,
>>>>>>>>>  Tobias
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>     Von: Preetham Nagaraju <preetham.nagaraju at gmail.com>
>>>>>>>>> Datum: Donnerstag, 14. März 2013 12:01
>>>>>>>>> An: <users at lists.opennebula.org>, <
>>>>>>>>> users-owner at lists.opennebula.org>
>>>>>>>>> Betreff: [one-users] Onevm in Failed state
>>>>>>>>>
>>>>>>>>>  Hi
>>>>>>>>>
>>>>>>>>>       I am using Opennebula 3.8.3 on Ubuntu with KVM hypervisor in
>>>>>>>>> it.
>>>>>>>>> I added the host successfully, and created the image and template.
>>>>>>>>>
>>>>>>>>> But the virtual machine starts with pending, prolog , boot and
>>>>>>>>> then goes to failed state......
>>>>>>>>>
>>>>>>>>> Please get me out of this failed state.......
>>>>>>>>>
>>>>>>>>> VM information is as follows:-
>>>>>>>>>
>>>>>>>>>   Virtual Machine information - one-10   ID 10  Name one-10  Owner
>>>>>>>>> preetham  Group users  State FAILED  LCM State LCM_INIT  Host --  Start
>>>>>>>>> time 16:02:14 03/14/2013  Deploy ID -  Permissions
>>>>>>>>>        Owner um-       Group ---       Other ---    Monitoring
>>>>>>>>> information   Net_TX 0  Net_RX 0  Used Memory 0K  Used CPU 0  VNC
>>>>>>>>> Session [image: VNC Disabled]
>>>>>>>>> My Vm template is as follows:-
>>>>>>>>>  VM template   VCPU 1  NIC
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>   MAC 02:00:c0:a8:96:67  NETWORK_ID 1  VLAN NO  NETWORK_UNAME
>>>>>>>>> oneadmin  BRIDGE br0  NETWORK localhost  IP 192.168.150.103
>>>>>>>>>
>>>>>>>>>   ERROR
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>   TIMESTAMP Thu Mar 14 16:16:41 2013  MESSAGE Error deploying
>>>>>>>>> virtual machine: Could not create domain from
>>>>>>>>> /var/lib/one/var//datastores/0/10/deployment.1
>>>>>>>>>
>>>>>>>>>   VMID 10  RAW
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>   TYPE kvm
>>>>>>>>>
>>>>>>>>>   NAME one-10  DISK
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>   0
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>   DATASTORE user_ds  TYPE CDROM  TARGET hdb  SAVE NO  IMAGE
>>>>>>>>> cd-Ubuntu-precise  DISK_ID 0  DEV_PREFIX hd  CLONE YES  SOURCE
>>>>>>>>> /var/lib/one/var/datastores/100/c2d97c815b985bece0b710a0675d1bb9
>>>>>>>>> IMAGE_UNAME preetham  IMAGE_ID 11  READONLY YES  TM_MAD shared
>>>>>>>>> DATASTORE_ID 100
>>>>>>>>>
>>>>>>>>>   1
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>   DATASTORE user_ds  TYPE FILE  TARGET hda  SAVE YES  PERSISTENT
>>>>>>>>> YES  IMAGE Ubuntu-precise  DISK_ID 1  DEV_PREFIX hd  CLONE NO
>>>>>>>>> SOURCE
>>>>>>>>> /var/lib/one/var/datastores/100/c1e8082f7e34c0cc91254c086f9b72de
>>>>>>>>> IMAGE_UNAME preetham  IMAGE_ID 12  READONLY NO  TM_MAD shared
>>>>>>>>> DATASTORE_ID 100
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>   OS
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>   ARCH x86_64  BOOT cdrom
>>>>>>>>>
>>>>>>>>>   MEMORY 1024  CPU 1  TEMPLATE_ID 11  GRAPHICS
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>   TYPE vnc  PORT 5910  KEYMAP es
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> My vm log is as follows:-
>>>>>>>>>
>>>>>>>>> Thu Mar 14 16:02:37 2013 [DiM][I]: New VM state is ACTIVE.
>>>>>>>>> Thu Mar 14 16:02:37 2013 [LCM][I]: New VM state is PROLOG.
>>>>>>>>> Thu Mar 14 16:02:37 2013 [VM][I]: Virtual Machine has no context
>>>>>>>>> Thu Mar 14 16:03:08 2013 [TM][I]: clone: Cloning /var/lib/one/var/datastores/100/c2d97c815b985bece0b710a0675d1bb9 in opennebula:/var/lib/one/var//datastores/0/10/disk.0
>>>>>>>>> Thu Mar 14 16:03:08 2013 [TM][I]: ExitCode: 0
>>>>>>>>> Thu Mar 14 16:03:09 2013 [TM][I]: ln: Linking /var/lib/one/var/datastores/100/c1e8082f7e34c0cc91254c086f9b72de in opennebula:/var/lib/one/var//datastores/0/10/disk.1
>>>>>>>>> Thu Mar 14 16:03:09 2013 [TM][I]: ExitCode: 0
>>>>>>>>> Thu Mar 14 16:03:09 2013 [LCM][I]: New VM state is BOOT
>>>>>>>>> Thu Mar 14 16:03:09 2013 [VMM][I]: Generating deployment file: /var/lib/one/var/vms/10/deployment.0
>>>>>>>>> Thu Mar 14 16:03:10 2013 [VMM][I]: ExitCode: 0
>>>>>>>>> Thu Mar 14 16:03:10 2013 [VMM][I]: Successfully execute network driver operation: pre.
>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: Command execution fail: cat << EOT | /var/tmp/one/vmm/kvm/deploy /var/lib/one/var//datastores/0/10/deployment.0 opennebula 10 opennebula
>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: error: Failed to create domain from /var/lib/one/var//datastores/0/10/deployment.0
>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: error: Cannot get interface MTU on 'br0': No such deviceThu Mar 14 16:03:13 2013 [VMM][E]: Could not create domain from /var/lib/one/var//datastores/0/10/deployment.0
>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: ExitCode: 255
>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: Failed to execute virtualization driver operation: deploy.Thu Mar 14 16:03:13 2013 [VMM][E]: Error deploying virtual machine: Could not create domain from /var/lib/one/var//datastores/0/10/deployment.0
>>>>>>>>> Thu Mar 14 16:03:13 2013 [DiM][I]: New VM state is FAILED
>>>>>>>>> Thu Mar 14 16:16:04 2013 [DiM][I]: New VM state is CLEANUP.
>>>>>>>>> Thu Mar 14 16:16:04 2013 [TM][I]: delete: Deleting /var/lib/one/var/datastores/0/10/disk.0
>>>>>>>>> Thu Mar 14 16:16:04 2013 [TM][I]: ExitCode: 0
>>>>>>>>> Thu Mar 14 16:16:04 2013 [TM][I]: delete: Deleting /var/lib/one/var/datastores/0/10/disk.1
>>>>>>>>> Thu Mar 14 16:16:04 2013 [TM][I]: ExitCode: 0
>>>>>>>>> Thu Mar 14 16:16:05 2013 [TM][I]: delete: Deleting /var/lib/one/var/datastores/0/10
>>>>>>>>> Thu Mar 14 16:16:05 2013 [TM][I]: ExitCode: 0
>>>>>>>>> Thu Mar 14 16:16:05 2013 [DiM][I]: New VM state is PENDING
>>>>>>>>> Thu Mar 14 16:16:10 2013 [DiM][I]: New VM state is ACTIVE.
>>>>>>>>> Thu Mar 14 16:16:10 2013 [LCM][I]: New VM state is PROLOG.
>>>>>>>>> Thu Mar 14 16:16:10 2013 [VM][I]: Virtual Machine has no context
>>>>>>>>> Thu Mar 14 16:16:36 2013 [TM][I]: clone: Cloning /var/lib/one/var/datastores/100/c2d97c815b985bece0b710a0675d1bb9 in opennebula:/var/lib/one/var//datastores/0/10/disk.0
>>>>>>>>> Thu Mar 14 16:16:36 2013 [TM][I]: ExitCode: 0
>>>>>>>>> Thu Mar 14 16:16:38 2013 [TM][I]: ln: Linking /var/lib/one/var/datastores/100/c1e8082f7e34c0cc91254c086f9b72de in opennebula:/var/lib/one/var//datastores/0/10/disk.1
>>>>>>>>> Thu Mar 14 16:16:38 2013 [TM][I]: ExitCode: 0
>>>>>>>>> Thu Mar 14 16:16:38 2013 [LCM][I]: New VM state is BOOT
>>>>>>>>> Thu Mar 14 16:16:38 2013 [VMM][I]: Generating deployment file: /var/lib/one/var/vms/10/deployment.1
>>>>>>>>> Thu Mar 14 16:16:39 2013 [VMM][I]: ExitCode: 0
>>>>>>>>> Thu Mar 14 16:16:39 2013 [VMM][I]: Successfully execute network driver operation: pre.
>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: Command execution fail: cat << EOT | /var/tmp/one/vmm/kvm/deploy /var/lib/one/var//datastores/0/10/deployment.1 opennebula 10 opennebula
>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: error: Failed to create domain from /var/lib/one/var//datastores/0/10/deployment.1
>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: error: Cannot get interface MTU on 'br0': No such deviceThu Mar 14 16:16:41 2013 [VMM][E]: Could not create domain from /var/lib/one/var//datastores/0/10/deployment.1
>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: ExitCode: 255
>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: Failed to execute virtualization driver operation: deploy.Thu Mar 14 16:16:41 2013 [VMM][E]: Error deploying virtual machine: Could not create domain from /var/lib/one/var//datastores/0/10/deployment.1
>>>>>>>>> Thu Mar 14 16:16:41 2013 [DiM][I]: New VM state is FAILED
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> *Regards,***
>>>>>>>>>
>>>>>>>>> *Preetham. N*
>>>>>>>>>
>>>>>>>>> *
>>>>>>>>> *
>>>>>>>>>  *
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> *
>>>>>>>>>   _______________________________________________ Users mailing
>>>>>>>>> list Users at lists.opennebula.org
>>>>>>>>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>  --
>>>>>>>>
>>>>>>>> *?** Regards,***
>>>>>>>>
>>>>>>>> *Preetham. N*
>>>>>>>>
>>>>>>>> *9945072638*
>>>>>>>>  *
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> *
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>  --
>>>>>>>
>>>>>>> *?** Regards,***
>>>>>>>
>>>>>>> *Preetham. N*
>>>>>>>
>>>>>>> *9945072638*
>>>>>>>  *
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> *
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>  --
>>>>>>
>>>>>> *?** Regards,***
>>>>>>
>>>>>> *Preetham. N*
>>>>>>
>>>>>> *9945072638*
>>>>>>  *
>>>>>>
>>>>>>
>>>>>>
>>>>>> *
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>>
>>>>> *?** Regards,***
>>>>>
>>>>> *Preetham. N*
>>>>>
>>>>> *9945072638*
>>>>> *
>>>>>
>>>>>
>>>>>
>>>>> *
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>>
>>>> *?** Regards,***
>>>>
>>>> *Preetham. N*
>>>>
>>>> *9945072638*
>>>> *
>>>>
>>>>
>>>>
>>>> *
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at lists.opennebula.org
>>>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>>>
>>>>
>>>
>>
>>
>> --
>>
>> *?** Regards,***
>>
>> *Preetham. N*
>>
>> *9945072638*
>> *
>>
>>
>>
>> *
>>
>
>


-- 

*?** Regards,***

*Preetham. N*

*9945072638*
*



*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20130417/8f92583a/attachment-0002.htm>

More information about the Users mailing list