[one-users] sunstone says : "OpenNebula is not running"
Guigui 6675636b206f6666
licks0re at hotmail.com
Wed May 2 02:31:48 PDT 2012
Good morning all,
So. I re-did everything from scratch.
1) re-installed the machine with opensuse 12.1
2) re-installed the softwares opennebula & sunstone
3) added the one_auth variable to oneadmin .bashrc profile to avoid confusion with the one_auth file
Unfortunately, still the same problem. But now, I see some auth problem in the oned.log (at the end of this message)
Wed May 2 11:27:39 2012 [ReM][D]: UserPoolInfo method invoked
Wed May 2 11:27:39 2012 [ReM][E]: [UserPoolInfo] User couldn't be authenticated, aborting call.
Am I confusing something here ? sunstone credentials are the credentials given in the sunstone_auth file, am I correct ?
(in fact, I set all the passwords to "susenebula"... oneadmin system account, in one_auth file and in sunstone_auth file)
To start the services, I do :
"sudo - oneadmin"
"one start"
"sunstone-server start"
It gives me no errors. One & sunstone logs at the end of this message.
So here are all the revelant config files:
one_auth file:
oneadmin:susenebula
sunstone_auth file:
oneadmin:susenebula
file rights :
-rw-r--r-- 1 oneadmin cloud 20 Jan 27 14:34 one_auth
-rw------- 1 oneadmin cloud 20 Jan 27 15:15 sunstone_auth
/etc/one/oned.conf
#*******************************************************************************
# OpenNebula Configuration file
#*******************************************************************************
#*******************************************************************************
# Daemon configuration attributes
#-------------------------------------------------------------------------------
# MANAGER_TIMER: Time in seconds the core uses to evaluate periodical functions.
# HOST_MONITORING_INTERVAL and VM_POLLING_INTERVAL can not have smaller values
# than MANAGER_TIMER.
#
# HOST_MONITORING_INTERVAL: Time in seconds between host monitorization.
# HOST_PER_INTERVAL: Number of hosts monitored in each interval.
#
# VM_POLLING_INTERVAL: Time in seconds between virtual machine monitorization.
# (use 0 to disable VM monitoring).
# VM_PER_INTERVAL: Number of VMs monitored in each interval.
#
# VM_DIR: Remote path to store the VM images, it should be shared between all
# the cluster nodes to perform live migrations. This variable is the default
# for all the hosts in the cluster. VM_DIR IS ONLY FOR THE NODES AND *NOT* THE
# FRONT-END
#
# SCRIPTS_REMOTE_DIR: Remote path to store the monitoring and VM management
# scripts.
#
# PORT: Port where oned will listen for xmlrpc calls.
#
# DB: Configuration attributes for the database backend
# backend : can be sqlite or mysql (default is sqlite)
# server : (mysql) host name or an IP address for the MySQL server
# port : (mysql) port for the connection to the server.
# If set to 0, the default port is used.
# user : (mysql) user's MySQL login ID
# passwd : (mysql) the password for user
# db_name : (mysql) the database name
#
# VNC_BASE_PORT: VNC ports for VMs can be automatically set to VNC_BASE_PORT +
# VMID
#
# DEBUG_LEVEL: 0 = ERROR, 1 = WARNING, 2 = INFO, 3 = DEBUG
#*******************************************************************************
#MANAGER_TIMER = 30
HOST_MONITORING_INTERVAL = 600
#HOST_PER_INTERVAL = 15
VM_POLLING_INTERVAL = 600
#VM_PER_INTERVAL = 5
#VM_DIR=/srv/cloud/one/var
SCRIPTS_REMOTE_DIR=/var/tmp/one
PORT = 2633
DB = [ backend = "sqlite" ]
# Sample configuration for MySQL
# DB = [ backend = "mysql",
# server = "localhost",
# port = 0,
# user = "oneadmin",
# passwd = "oneadmin",
# db_name = "opennebula" ]
VNC_BASE_PORT = 5900
DEBUG_LEVEL = 3
#*******************************************************************************
# Physical Networks configuration
#*******************************************************************************
# NETWORK_SIZE: Here you can define the default size for the virtual networks
#
# MAC_PREFIX: Default MAC prefix to be used to create the auto-generated MAC
# addresses is defined here (this can be overrided by the Virtual Network
# template)
#*******************************************************************************
NETWORK_SIZE = 254
MAC_PREFIX = "02:00"
#*******************************************************************************
# Image Repository Configuration
#*******************************************************************************
# DEFAULT_IMAGE_TYPE: This can take values
# OS Image file holding an operating system
# CDROM Image file holding a CDROM
# DATABLOCK Image file holding a datablock,
# always created as an empty block
# DEFAULT_DEVICE_PREFIX: This can be set to
# hd IDE prefix
# sd SCSI
# xvd XEN Virtual Disk
# vd KVM virtual disk
#*******************************************************************************
DEFAULT_IMAGE_TYPE = "OS"
DEFAULT_DEVICE_PREFIX = "hd"
#*******************************************************************************
# Information Driver Configuration
#*******************************************************************************
# You can add more information managers with different configurations but make
# sure it has different names.
#
# name : name for this information manager
#
# executable: path of the information driver executable, can be an
# absolute path or relative to $ONE_LOCATION/lib/mads (or
# /usr/lib/one/mads/ if OpenNebula was installed in /)
#
# arguments : for the driver executable, usually a probe configuration file,
# can be an absolute path or relative to $ONE_LOCATION/etc (or
# /etc/one/ if OpenNebula was installed in /)
#*******************************************************************************
#-------------------------------------------------------------------------------
# KVM Information Driver Manager Configuration
# -r number of retries when monitoring a host
# -t number of threads, i.e. number of hosts monitored at the same time
#-------------------------------------------------------------------------------
IM_MAD = [
name = "im_kvm",
executable = "one_im_ssh",
arguments = "-r 0 -t 15 kvm" ]
#-------------------------------------------------------------------------------
#-------------------------------------------------------------------------------
# XEN Information Driver Manager Configuration
# -r number of retries when monitoring a host
# -t number of threads, i.e. number of hosts monitored at the same time
#-------------------------------------------------------------------------------
#IM_MAD = [
# name = "im_xen",
# executable = "one_im_ssh",
# arguments = "xen" ]
#-------------------------------------------------------------------------------
#-------------------------------------------------------------------------------
# VMware Information Driver Manager Configuration
# -r number of retries when monitoring a host
# -t number of threads, i.e. number of hosts monitored at the same time
#-------------------------------------------------------------------------------
#IM_MAD = [
# name = "im_vmware",
# executable = "one_im_sh",
# arguments = "-t 15 -r 0 vmware" ]
#-------------------------------------------------------------------------------
#-------------------------------------------------------------------------------
# EC2 Information Driver Manager Configuration
#-------------------------------------------------------------------------------
#IM_MAD = [
# name = "im_ec2",
# executable = "one_im_ec2",
# arguments = "im_ec2/im_ec2.conf" ]
#-------------------------------------------------------------------------------
#-----------------------------------------------------------------------------
# Ganglia Information Driver Manager Configuration
#-----------------------------------------------------------------------------
#IM_MAD = [
# name = "im_ganglia",
# executable = "one_im_sh",
# arguments = "ganglia" ]
#-----------------------------------------------------------------------------
#-------------------------------------------------------------------------------
# Dummy Information Driver Manager Configuration
#-------------------------------------------------------------------------------
#IM_MAD = [ name="im_dummy", executable="one_im_dummy"]
#-------------------------------------------------------------------------------
#*******************************************************************************
# Virtualization Driver Configuration
#*******************************************************************************
# You can add more virtualization managers with different configurations but
# make sure it has different names.
#
# name : name of the virtual machine manager driver
#
# executable: path of the virtualization driver executable, can be an
# absolute path or relative to $ONE_LOCATION/lib/mads (or
# /usr/lib/one/mads/ if OpenNebula was installed in /)
#
# arguments : for the driver executable
#
# default : default values and configuration parameters for the driver, can
# be an absolute path or relative to $ONE_LOCATION/etc (or
# /etc/one/ if OpenNebula was installed in /)
#
# type : driver type, supported drivers: xen, kvm, xml
#*******************************************************************************
#-------------------------------------------------------------------------------
# KVM Virtualization Driver Manager Configuration
# -r number of retries when monitoring a host
# -t number of threads, i.e. number of hosts monitored at the same time
# -l <actions[=command_name]> actions executed locally, command can be
# overridden for each action.
# Valid actions: deploy, shutdown, cancel, save, restore, migrate, poll
# An example: "-l migrate,poll=poll_ganglia,save"
#-------------------------------------------------------------------------------
VM_MAD = [
name = "vmm_kvm",
executable = "one_vmm_exec",
arguments = "-t 15 -r 0 kvm",
default = "vmm_exec/vmm_exec_kvm.conf",
type = "kvm" ]
#-------------------------------------------------------------------------------
#-------------------------------------------------------------------------------
# XEN Virtualization Driver Manager Configuration
# -r number of retries when monitoring a host
# -t number of threads, i.e. number of hosts monitored at the same time
# -l <actions[=command_name]> actions executed locally, command can be
# overridden for each action.
# Valid actions: deploy, shutdown, cancel, save, restore, migrate, poll
# An example: "-l migrate,poll=poll_ganglia,save"
#-------------------------------------------------------------------------------
#VM_MAD = [
# name = "vmm_xen",
# executable = "one_vmm_exec",
# arguments = "-t 15 -r 0 xen",
# default = "vmm_exec/vmm_exec_xen.conf",
# type = "xen" ]
#-------------------------------------------------------------------------------
#-------------------------------------------------------------------------------
# VMware Virtualization Driver Manager Configuration
# -r number of retries when monitoring a host
# -t number of threads, i.e. number of hosts monitored at the same time
#-------------------------------------------------------------------------------
#VM_MAD = [
# name = "vmm_vmware",
# executable = "one_vmm_sh",
# arguments = "-t 15 -r 0 vmware",
# default = "vmm_exec/vmm_exec_vmware.conf",
# type = "vmware" ]
#-------------------------------------------------------------------------------
#-------------------------------------------------------------------------------
# EC2 Virtualization Driver Manager Configuration
# arguments: default values for the EC2 driver, can be an absolute path or
# relative to $ONE_LOCATION/etc (or /etc/one/ if OpenNebula was
# installed in /).
#-------------------------------------------------------------------------------
#VM_MAD = [
# name = "vmm_ec2",
# executable = "one_vmm_ec2",
# arguments = "vmm_ec2/vmm_ec2.conf",
# type = "xml" ]
#-------------------------------------------------------------------------------
#-------------------------------------------------------------------------------
# Dummy Virtualization Driver Configuration
#-------------------------------------------------------------------------------
#VM_MAD = [ name="vmm_dummy", executable="one_vmm_dummy", type="xml" ]
#-------------------------------------------------------------------------------
#*******************************************************************************
# Transfer Manager Driver Configuration
#*******************************************************************************
# You can add more transfer managers with different configurations but make
# sure it has different names.
# name : name for this transfer driver
#
# executable: path of the transfer driver executable, can be an
# absolute path or relative to $ONE_LOCATION/lib/mads (or
# /usr/lib/one/mads/ if OpenNebula was installed in /)
#
# arguments : for the driver executable, usually a commands configuration file
# , can be an absolute path or relative to $ONE_LOCATION/etc (or
# /etc/one/ if OpenNebula was installed in /)
#*******************************************************************************
#-------------------------------------------------------------------------------
# SHARED Transfer Manager Driver Configuration
#-------------------------------------------------------------------------------
TM_MAD = [
name = "tm_shared",
executable = "one_tm",
arguments = "tm_shared/tm_shared.conf" ]
#-------------------------------------------------------------------------------
#-------------------------------------------------------------------------------
# SSH Transfer Manager Driver Configuration
#-------------------------------------------------------------------------------
#TM_MAD = [
# name = "tm_ssh",
# executable = "one_tm",
# arguments = "tm_ssh/tm_ssh.conf" ]
#-------------------------------------------------------------------------------
#-------------------------------------------------------------------------------
# Dummy Transfer Manager Driver Configuration
#-------------------------------------------------------------------------------
#TM_MAD = [
# name = "tm_dummy",
# executable = "one_tm",
# arguments = "tm_dummy/tm_dummy.conf" ]
#-------------------------------------------------------------------------------
#-------------------------------------------------------------------------------
# LVM Transfer Manager Driver Configuration
#-------------------------------------------------------------------------------
#TM_MAD = [
# name = "tm_lvm",
# executable = "one_tm",
# arguments = "tm_lvm/tm_lvm.conf" ]
#-------------------------------------------------------------------------------
#-------------------------------------------------------------------------------
# VMware DataStore Transfer Manager Driver Configuration
#-------------------------------------------------------------------------------
#TM_MAD = [
# name = "tm_vmware",
# executable = "one_tm",
# arguments = "tm_vmware/tm_vmware.conf" ]
#-------------------------------------------------------------------------------
#*******************************************************************************
# Image Manager Driver Configuration
#*******************************************************************************
# Drivers to manage the image repository, specialized for the storage backend
# executable: path of the transfer driver executable, can be an
# absolute path or relative to $ONE_LOCATION/lib/mads (or
# /usr/lib/one/mads/ if OpenNebula was installed in /)
#
# arguments : for the driver executable
#*******************************************************************************
#-------------------------------------------------------------------------------
# FS based Image Manager Driver Configuration
# -t number of threads, i.e. number of repo operations at the same time
#-------------------------------------------------------------------------------
IMAGE_MAD = [
executable = "one_image",
arguments = "fs -t 15" ]
#-------------------------------------------------------------------------------
#*******************************************************************************
# Hook Manager Configuration
#*******************************************************************************
# The Driver (HM_MAD), used to execute the Hooks
# executable: path of the hook driver executable, can be an
# absolute path or relative to $ONE_LOCATION/lib/mads (or
# /usr/lib/one/mads/ if OpenNebula was installed in /)
#
# arguments : for the driver executable, can be an absolute path or relative
# to $ONE_LOCATION/etc (or /etc/one/ if OpenNebula was installed
# in /)
#
# Virtual Machine Hooks (VM_HOOK) defined by:
# name : for the hook, useful to track the hook (OPTIONAL)
# on : when the hook should be executed,
# - CREATE, when the VM is created (onevm create)
# - PROLOG, when the VM is in the prolog state
# - RUNNING, after the VM is successfully booted
# - SHUTDOWN, after the VM is shutdown
# - STOP, after the VM is stopped (including VM image transfers)
# - DONE, after the VM is deleted or shutdown
# - FAILED, when the VM enters the failed state
# command : path is relative to $ONE_LOCATION/var/remotes/hook
# (self-contained) or to /var/lib/one/remotes/hook (system-wide).
# That directory will be copied on the hosts under
# SCRIPTS_REMOTE_DIR. It can be an absolute path that must exist
# on the target host
# arguments : for the hook. You can access to VM information with $
# - $VMID, the ID of the virtual machine
# - $TEMPLATE, the VM template in xml and base64 encoded
# remote : values,
# - YES, The hook is executed in the host where the VM was
# allocated
# - NO, The hook is executed in the OpenNebula server (default)
#
#
# Host Hooks (HOST_HOOK) defined by:
# name : for the hook, useful to track the hook (OPTIONAL)
# on : when the hook should be executed,
# - CREATE, when the Host is created (onehost create)
# - ERROR, when the Host enters the error state
# - DISABLE, when the Host is disabled
# command : path is relative to $ONE_LOCATION/var/remotes/hook
# (self-contained) or to /var/lib/one/remotes/hook (system-wide).
# That directory will be copied on the hosts under
# SCRIPTS_REMOTE_DIR. It can be an absolute path that must exist
# on the target host.
# arguments : for the hook. You can use the following Host information:
# - $HID, the ID of the host
# - $TEMPLATE, the Host template in xml and base64 encoded
# remote : values,
# - YES, The hook is executed in the host
# - NO, The hook is executed in the OpenNebula server (default)
#-------------------------------------------------------------------------------
HM_MAD = [
executable = "one_hm" ]
#-------------------------------------------------------------------------------
#*******************************************************************************
# Fault Tolerance Hooks
#*******************************************************************************
# This hook is used to perform recovery actions when a host fails. The VMs
# running in the host can be deleted (use -d option) or resubmitted (-r) in
# other host
# Last argument (force) can be "y", so suspended VMs in the host will be
# resubmitted/deleted, or "n", so suspended VMs in the host will be ignored
#
#HOST_HOOK = [
# name = "error",
# on = "ERROR",
# command = "ft/host_error.rb",
# arguments = "$HID -r n",
# remote = "no" ]
#-------------------------------------------------------------------------------
# These two hooks can be used to automatically delete or resubmit VMs that reach
# the "failed" state. This way, the administrator doesn't have to interact
# manually to release its resources or retry the deployment.
#
#
# Only one of them should be uncommented.
#-------------------------------------------------------------------------------
#
#VM_HOOK = [
# name = "on_failure_delete",
# on = "FAILED",
# command = "/usr/bin/env onevm delete",
# arguments = "$VMID" ]
#
#VM_HOOK = [
# name = "on_failure_resubmit",
# on = "FAILED",
# command = "/usr/bin/env onevm resubmit",
# arguments = "$VMID" ]
#-------------------------------------------------------------------------------
#*******************************************************************************
# Auth Manager Configuration
#*******************************************************************************
# AUTH_MAD: The Driver that will be used to authenticate (authn) and
# authorize (authz) OpenNebula requests. If defined OpenNebula will use the
# built-in auth policies.
#
# executable: path of the auth driver executable, can be an
# absolute path or relative to $ONE_LOCATION/lib/mads (or
# /usr/lib/one/mads/ if OpenNebula was installed in /)
#
# arguments :
# --authn: list of authentication modules separated by commas, if not
# defined all the modules available will be enabled
# --authz: authorization module
#
# SESSION_EXPIRATION_TIME: Time in seconds to keep an authenticated token as
# valid. During this time, the driver is not used. Use 0 to disable session
# caching
#
# ENABLE_OTHER_PERMISSIONS: Whether or not to enable the permissions for
# 'other'. Users in the oneadmin group will still be able to change
# these permissions. Values: YES or NO
#*******************************************************************************
AUTH_MAD = [
executable = "one_auth_mad",
arguments = "--authn ssh,x509,ldap,server_cipher,server_x509"
# arguments = "--authz quota --authn ssh,x509,ldap,server_cipher,server_x509"
]
SESSION_EXPIRATION_TIME = 900
#ENABLE_OTHER_PERMISSIONS = "YES"
/etc/one/sunstone-server.conf
# OpenNebula sever contact information
:one_xmlrpc: http://localhost:2633/RPC2
# Server Configuration
:host: localhost
:port: 8080
# Authentication driver for incomming requests
# sunstone, for OpenNebula's user-password scheme
# x509, for x509 certificates based authentication
:auth: sunstone
# Authentication driver to communicate with OpenNebula core
# cipher, for symmetric cipher encryption of tokens
# x509, for x509 certificate encryption of tokens
:core_auth: cipher
# VNC Configuration
:vnc_proxy_base_port: 29876
:novnc_path:
# Default language setting
:lang: en_US
/var/log/one/oned.log
Wed May 2 11:24:38 2012 [ONE][I]: Starting OpenNebula 3.2.1
----------------------------------------
OpenNebula Configuration File
----------------------------------------
AUTH_MAD=ARGUMENTS=--authn ssh,x509,ldap,server_cipher,server_x509,EXECUTABLE=one_auth_mad
DB=BACKEND=sqlite
DEBUG_LEVEL=3
DEFAULT_DEVICE_PREFIX=hd
DEFAULT_IMAGE_TYPE=OS
ENABLE_OTHER_PERMISSIONS=YES
HM_MAD=EXECUTABLE=one_hm
HOST_MONITORING_INTERVAL=600
HOST_PER_INTERVAL=15
IMAGE_MAD=ARGUMENTS=fs -t 15,EXECUTABLE=one_image
IM_MAD=ARGUMENTS=-r 0 -t 15 kvm,EXECUTABLE=one_im_ssh,NAME=im_kvm
MAC_PREFIX=02:00
MANAGER_TIMER=15
NETWORK_SIZE=254
PORT=2633
SCRIPTS_REMOTE_DIR=/var/tmp/one
SESSION_EXPIRATION_TIME=900
TM_MAD=ARGUMENTS=tm_shared/tm_shared.conf,EXECUTABLE=one_tm,NAME=tm_shared
VM_DIR=/var/lib/one/
VM_MAD=ARGUMENTS=-t 15 -r 0 kvm,DEFAULT=vmm_exec/vmm_exec_kvm.conf,EXECUTABLE=one_vmm_exec,NAME=vmm_kvm,TYPE=kvm
VM_PER_INTERVAL=5
VM_POLLING_INTERVAL=600
VNC_BASE_PORT=5900
----------------------------------------
Wed May 2 11:24:38 2012 [ONE][I]: Log level:3 [0=ERROR,1=WARNING,2=INFO,3=DEBUG]
Wed May 2 11:24:38 2012 [ONE][I]: Checking database version.
Wed May 2 11:24:38 2012 [VMM][I]: Starting Virtual Machine Manager...
Wed May 2 11:24:38 2012 [LCM][I]: Starting Life-cycle Manager...
Wed May 2 11:24:38 2012 [VMM][I]: Virtual Machine Manager started.
Wed May 2 11:24:38 2012 [LCM][I]: Life-cycle Manager started.
Wed May 2 11:24:38 2012 [InM][I]: Starting Information Manager...
Wed May 2 11:24:38 2012 [InM][I]: Information Manager started.
Wed May 2 11:24:38 2012 [TrM][I]: Starting Transfer Manager...
Wed May 2 11:24:38 2012 [DiM][I]: Starting Dispatch Manager...
Wed May 2 11:24:38 2012 [TrM][I]: Transfer Manager started.
Wed May 2 11:24:38 2012 [HKM][I]: Starting Hook Manager...
Wed May 2 11:24:38 2012 [DiM][I]: Dispatch Manager started.
Wed May 2 11:24:38 2012 [HKM][I]: Hook Manager started.
Wed May 2 11:24:38 2012 [AuM][I]: Starting Auth Manager...
Wed May 2 11:24:38 2012 [AuM][I]: Authorization Manager started.
Wed May 2 11:24:38 2012 [ImM][I]: Starting Image Manager...
Wed May 2 11:24:38 2012 [ImM][I]: Image Manager started.
Wed May 2 11:24:38 2012 [ReM][I]: Starting Request Manager...
Wed May 2 11:24:38 2012 [ReM][I]: Starting XML-RPC server, port 2633 ...
Wed May 2 11:24:38 2012 [ReM][I]: Request Manager started.
Wed May 2 11:24:40 2012 [VMM][I]: Loading Virtual Machine Manager drivers.
Wed May 2 11:24:40 2012 [VMM][I]: Loading driver: vmm_kvm (KVM)
Wed May 2 11:24:40 2012 [VMM][I]: Driver vmm_kvm loaded.
Wed May 2 11:24:40 2012 [InM][I]: Loading Information Manager drivers.
Wed May 2 11:24:40 2012 [InM][I]: Loading driver: im_kvm
Wed May 2 11:24:40 2012 [InM][I]: Driver im_kvm loaded
Wed May 2 11:24:40 2012 [TM][I]: Loading Transfer Manager drivers.
Wed May 2 11:24:40 2012 [VMM][I]: Loading driver: tm_shared
Wed May 2 11:24:40 2012 [TM][I]: Driver tm_shared loaded.
Wed May 2 11:24:40 2012 [HKM][I]: Loading Hook Manager driver.
Wed May 2 11:24:40 2012 [HKM][I]: Hook Manager loaded
Wed May 2 11:24:40 2012 [ImM][I]: Loading Image Manager driver.
Wed May 2 11:24:40 2012 [ImM][I]: Image Manager loaded
Wed May 2 11:24:40 2012 [AuM][I]: Loading Auth. Manager driver.
Wed May 2 11:24:40 2012 [AuM][I]: Auth Manager loaded
Wed May 2 11:24:57 2012 [ReM][D]: HostPoolInfo method invoked
Wed May 2 11:24:57 2012 [ReM][D]: VirtualMachinePoolInfo method invoked
Wed May 2 11:24:57 2012 [ReM][D]: AclInfo method invoked
Wed May 2 11:25:27 2012 [ReM][D]: HostPoolInfo method invoked
Wed May 2 11:25:27 2012 [ReM][D]: VirtualMachinePoolInfo method invoked
Wed May 2 11:25:27 2012 [ReM][D]: AclInfo method invoked
Wed May 2 11:26:56 2012 [ReM][D]: HostPoolInfo method invoked
Wed May 2 11:26:57 2012 [ReM][D]: VirtualMachinePoolInfo method invoked
Wed May 2 11:26:57 2012 [ReM][D]: AclInfo method invoked
Wed May 2 11:27:26 2012 [ReM][D]: HostPoolInfo method invoked
Wed May 2 11:27:27 2012 [ReM][D]: VirtualMachinePoolInfo method invoked
Wed May 2 11:27:27 2012 [ReM][D]: AclInfo method invoked
Wed May 2 11:27:39 2012 [ReM][D]: UserPoolInfo method invoked
Wed May 2 11:27:39 2012 [ReM][E]: [UserPoolInfo] User couldn't be authenticated, aborting call.
/var/log/one/sunstone.log
== Sinatra/1.3.2 has taken the stage on 8080 for development with backup from Thin
(and that's all until I stop the sunstone-server.)
Again, thanks all for your answers, Olivier, Lehel & Hector :-)
Guillaume
Date: Wed, 2 May 2012 08:18:55 +0200
From: olivier.sallou at codeless.fr
To: licks0re at hotmail.com
Subject: Re: [one-users] sunstone says : "OpenNebula is not running"
Le 5/1/12 10:10 AM, Guigui 6675636b206f6666 a écrit :
Well, it's on the same machine so I guess it tries to connect
localhost, am I wrong?
By the way, happy day-off 1st of may ;-)
All depends on configuration.
If it listens on 127.0.0.1, it will accept connections only on this
interface. So it sunstone is configured to call oned on current ip
instead of 127.0.01 it will fail for example.
The listen address and the connection address should exactly be the
same (or one should listen on 0.0.0.0)
Olivier
> To: users at lists.opennebula.org
> Date: Tue, 1 May 2012 12:28:06 +0200
> From: hsanjuan at opennebula.org
> Subject: Re: [one-users] sunstone says : "OpenNebula is not running"
>
> Hi, can you send /var/log/one/sunstone.log. It may have useful info. Also
> check oned.log in case it is an auth problem.
>
> Hector
>
> En Tue, 01 May 2012 08:50:58 +0200, Guigui 6675636b206f6666
> <licks0re at hotmail.com> escribió:
>
> >
> > Good morning,
> >
> >
> >
> > I'm trying to setup open nebula on an opensuse 12.1
> >
> >
> >
> > I followed this document (which, if you do exactly the steps is NOT
> > working at the end):
> >
> >
> >
> > SDB:Cloud OpenNebula - openSUSE
> >
> >
> >
> > The problem is that I can't get sunstone server working. I double
> > checked the settings, etc, no way I'll get it to work.
> >
> >
> >
> > Sunstone server systematically answers :
> >
> >
> >
> > "OpenNebula is not running"
> >
> >
> >
> > But, I confirm that open nebula IS running, here's a ps -ef | grep one :
> >
> >
> >
> > oneadmin 3046 1 0 Apr30 pts/0 00:00:05 /usr/bin/oned -f
> >
> > oneadmin 3064 1 0 Apr30 pts/0 00:00:03 /usr/bin/mm_sched
> >
> > oneadmin 3067 3046 0 Apr30 pts/0 00:00:00 ruby
> > /usr/lib/one/mads/one_vmm_exec.rb -t 15 -r 0 kvm
> >
> > oneadmin 3077 3046 0 Apr30 pts/0 00:00:00 ruby
> > /usr/lib/one/mads/one_im_exec.rb -r 0 -t 15 kvm
> >
> > oneadmin 3086 3046 0 Apr30 pts/0 00:00:00 ruby
> > /usr/lib/one/mads/one_tm.rb tm_shared/tm_shared.conf
> >
> > oneadmin 3099 3046 0 Apr30 pts/0 00:00:00 ruby
> > /usr/lib/one/mads/one_hm.rb
> >
> > oneadmin 3109 3046 0 Apr30 pts/0 00:00:00 ruby
> > /usr/lib/one/mads/one_image.rb fs -t 15
> >
> > oneadmin 3118 3046 0 Apr30 pts/0 00:00:00 ruby
> > /usr/lib/one/mads/one_auth_mad.rb --authn
> > ssh,x509,ldap,server_cipher,server_x509
> >
> > root 3162 1 0 Apr30 pts/0 00:00:17 ruby
> > /usr/lib/one/sunstone/sunstone-server.rb
> >
> > root 6697 2989 0 08:18 pts/0 00:00:00 grep --color=auto one
> >
> >
> >
> > Any clues?
> >
> > Thanks in advance!
>
>
> --
> Hector Sanjuan
> OpenNebula Developer
> _______________________________________________
> Users mailing list
> Users at lists.opennebula.org
> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20120502/35d34299/attachment-0003.htm>
More information about the Users
mailing list