[one-users] VPN Access ...

[Daniel Molina]

On 14 August 2012 10:07, Fernandez, H.J. <hector.fernandez at vu.nl> wrote:

>  Hi Daniel,
>
>
> This is the content of my template:
>
> CONTEXT=[
>   FILES="/var/tmp/ubuntuVM/init.sh",
>   GATEWAY="192.168.122.1",
>   NETMASK="255.255.255.0" ]
> CPU="0.5"
> DISK=[
>   IMAGE="ubuntu_image_template2",
>   IMAGE_UNAME="oneadmin" ]
> FEATURES=[
>   ACPI="yes" ]
> GRAPHICS=[
>   LISTEN="0.0.0.0",
>   TYPE="vnc" ]
> MEMORY="1000"
> NAME="ubuntu_vmtemplate"
> NIC=[
>   NETWORK="PrivateNet2",
>   NETWORK_UNAME="oneadmin" ]
> OS=[
>   ARCH="x86_64",
>   BOOT="hd" ]
> RAW=[
>   DATA="<devices><serial type=\"pty\"><source path=\"/dev/pts/5\"/><target
> port=\"0\"/></serial><console type=\"pty\" tty=\"/dev/pts/5\"><source
> path=\"/dev/pts/5\"/><target port=\"0\"/></console></devices>",
>   TYPE="kvm" ]
> TEMPLATE_ID="21"
>
>
Could you try specifying the ROOT device in the OS section?

OS=[
  ARCH="x86_64",
  BOOT="hd",
  ROOT="sda1" ]

Cheers




> On the other hand I verified the oned.conf file which is enclosed in this
> mail, and I didn´t find any mistake.
>
> Thanks in advance,
>
> Cheers,
> Héctor
>  ------------------------------
> *From:* Daniel Molina [dmolina at opennebula.org]
> *Sent:* Tuesday, 14 August 2012 8:43 AM
> *To:* Fernandez, H.J.
> *Cc:* opennebula users
> *Subject:* Re: [one-users] VPN Access ...
>
>  Hi,
>
> On 13 August 2012 15:55, Fernandez, H.J. <hector.fernandez at vu.nl> wrote:
>
>>  Hi all,
>>
>> I created a Ubuntu 12.04 LTS virtual machine to test my OpenNebula
>> installation and I got some errors when sunstone tries to connect to it
>> using VNC.
>>
>> *
>> VFS: cannot open root device ¨(null)¨ or unknown-block(0,0)
>> Please append a correct root¨ boot option; here are the available
>> partitions:
>> 0800    715052         sda driver: sd
>> 0801    715020         sda1
>> 0b00    1048575       sr0 driver: sr
>>
>> Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block
>> * *(0,0*)
>>
>>
>> Did you get these errors before ? I think I need to configure something
>> at the BOOT parameters of my virtual image template but I don´t know what.
>>
>> I also attached a png file to show you the error.
>>
>
>
>  Could you send us the template you're using? and please check if there
> is any error in your oned.log
>
>  Cheers.
>
>
>>
>>
>> Thanks in advance.
>>
>> Best,
>> Héctor
>>
>>
>> -------------------------- Héctor FERNÁNDEZ
>> ---------------------------------------------------
>> Department of Computer Science                  Tel :  +31 20 59 87707
>> Vrije Universiteit - de Boelelaan 1081a
>> 1081 HV Amsterdam - The Netherlands           E-mail:
>> hector.fernandez at cs.vu.nl
>> Room R433
>>
>> ------------------------------------------------------------------------------------------------------------
>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.opennebula.org
>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>
>>
>
>
>  --
> Daniel Molina
> Project Engineer
> OpenNebula - The Open Source Solution for Data Center Virtualization
> www.OpenNebula.org | dmolina at opennebula.org | @OpenNebula
>



-- 
Daniel Molina
Project Engineer
OpenNebula - The Open Source Solution for Data Center Virtualization
www.OpenNebula.org | dmolina at opennebula.org | @OpenNebula
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20120814/469bd0f7/attachment-0003.htm>