[one-users] oned crashes after sometime , scheduler keeps running saying C_PTR recieved faulty value
Abhishek [ABK] Kumar
abhikumar163 at gmail.com
Thu Sep 15 04:15:41 PDT 2011
Hi,
I get that as in a way to get entire required coredump, making it
easier to debug. I said I tried it but wasn't able to get any
conclusion in the limited attempt.
And, now I switched back to older version so don't have it anymore.
Though, I'm thinking of repeating the task again (after some time) in
a smaller prototype to perfect it, if the error re-occurs... I'll
provide the coredump.
Thanks for keeping a constant tab and effort.
Regards,
AbhishekKr
On 9/15/11, Carlos Martín Sánchez <cmartin at opennebula.org> wrote:
> Hi,
>
> The ulimit command is used to generate a core dump file in case the daemon
> crashes, the behaviour is not modified.
>
> Anyway, thanks for the feedback.
> --
> Carlos Martín, MSc
> Project Major Contributor
> OpenNebula - The Open Source Toolkit for Cloud Computing
> www.OpenNebula.org <http://www.opennebula.org/> | cmartin at opennebula.org
>
>
> 2011/9/12 Abhishek [ABK] Kumar <abhikumar163 at gmail.com>
>
>> I no more have the same setup, and replaced it with version 2.2.x and its
>> running fine now.
>>
>> Though, earlier I used that 'ulimit' action while troubleshooting and at
>> least in logs, there was no behavior change. It failed the same way as
>> before.
>>
>>
>> --
>> Regards,
>> Abhishek Kumar
>> https://sites.google.com/site/abhikumar163/
>>
>>
>> --
>> --------------ABK-----mail.signature--------------------
>>
>> <http://www.blogger.com/profile/06276198262605731980><http://abhishekkr.deviantart.com/><http://www.facebook.com/aBionic><http://www.twitter.com/aBionic><http://sourceforge.net/users/abhishekkr><http://www.youtube.com/user/1ABK><http://in.linkedin.com/in/abionic>
>> -----------------------------------------------------------
>> ~=ABK=~
>>
>>
>>
>> 2011/9/12 Carlos Martín Sánchez <cmartin at opennebula.org>
>>
>>> Hi,
>>>
>>> Could you please set
>>>
>>> $ ulimit -c unlimited
>>>
>>> and restart the ONE daemon? if it crashes again, please send the core
>>> dump file in /var/lib/one (or $ONE_LOCATION/var).
>>>
>>>
>>> Regards.
>>> --
>>> Carlos Martín, MSc
>>> Project Major Contributor
>>> OpenNebula - The Open Source Toolkit for Cloud Computing
>>> www.OpenNebula.org <http://www.opennebula.org/> | cmartin at opennebula.org
>>>
>>>
>>> 2011/9/8 Abhishek [ABK] Kumar <abhikumar163 at gmail.com>
>>>
>>> Yes, I did that on purpose..... because "oned.log" doesn't show any
>>>> anything just_before/on/after the oned creashes..... the only activity
>>>> affected by it at that time & after is shown in the scheduler log.
>>>>
>>>> There is no activity in oned.log after it loads all modules and says
>>>> success on each module load.
>>>> *Then after a minute or so, oned dies and the only activity is shown in
>>>> shed.log* .
>>>>
>>>>
>>>> --
>>>> Regards,
>>>> Abhishek Kumar
>>>> https://sites.google.com/site/abhikumar163/
>>>>
>>>>
>>>> --
>>>> --------------ABK-----mail.signature--------------------
>>>>
>>>> <http://www.blogger.com/profile/06276198262605731980><http://abhishekkr.deviantart.com/><http://www.facebook.com/aBionic><http://www.twitter.com/aBionic><http://sourceforge.net/users/abhishekkr><http://www.youtube.com/user/1ABK><http://in.linkedin.com/in/abionic>
>>>> -----------------------------------------------------------
>>>> ~=ABK=~
>>>>
>>>>
>>>>
>>>> 2011/9/8 Carlos Martín Sánchez <cmartin at opennebula.org>
>>>>
>>>>> Hi,
>>>>>
>>>>> It looks like you sent the scheduler.log file, not oned.log. If you
>>>>> still have the file around, could you send it?
>>>>>
>>>>> The error message can be related to these threads:
>>>>>
>>>>> http://lists.opennebula.org/pipermail/users-opennebula.org/2011-August/006096.html
>>>>>
>>>>> http://lists.opennebula.org/pipermail/users-opennebula.org/2010-August/002470.html
>>>>>
>>>>> Regards.
>>>>> --
>>>>> Carlos Martín, MSc
>>>>> Project Major Contributor
>>>>> OpenNebula - The Open Source Toolkit for Cloud Computing
>>>>> www.OpenNebula.org <http://www.opennebula.org/> | cmartin at opennebula
>>>>> .org
>>>>>
>>>>>
>>>>> On Wed, Sep 7, 2011 at 2:06 PM, Abhishek [ABK] Kumar <
>>>>> abhikumar163 at gmail.com> wrote:
>>>>>
>>>>>> I have OpenNebula 2.9.8 installed at CentOs 5.5.....
>>>>>>
>>>>>> oned crashes after sometime , scheduler keeps running saying C_PTR
>>>>>> recieved faulty value
>>>>>>
>>>>>> =====log at the moment error oned crashes*
>>>>>>
>>>>>> Wed Sep 7 17:28:20 2011 [POOL][E]: Could not retrieve pool info from
>>>>>> ONE
>>>>>> Wed Sep 7 17:28:20 2011 [POOL][E]: Could not retrieve pool info from
>>>>>> ONE
>>>>>> Wed Sep 7 17:28:20 2011 [VM][E]: Exception raised: RPC response
>>>>>> indicates failure. Value of type ??? supplied where type C_PTR was
>>>>>> expected.
>>>>>> Wed Sep 7 17:28:20 2011 [POOL][E]: Could not retrieve pool info from
>>>>>> ONE
>>>>>> Wed Sep 7 17:28:20 2011 [VM][E]: Exception raised: RPC response
>>>>>> indicates failure. Value of type ??? supplied where type C_PTR was
>>>>>> expected.
>>>>>> Wed Sep 7 17:28:20 2011 [POOL][E]: Could not retrieve pool info from
>>>>>> ONE
>>>>>> Wed Sep 7 17:28:24 2011 [HOST][D]: Discovered Hosts (enabled):
>>>>>> Wed Sep 7 17:28:24 2011 [HOST][D]: Discovered Hosts (enabled):
>>>>>> Wed Sep 7 17:28:24 2011 [HOST][D]: Discovered Hosts (enabled):
>>>>>> Wed Sep 7 17:28:24 2011 [HOST][E]: Exception raised: Unable to
>>>>>> transport XML to server and get XML response back. Curl failed to
>>>>>> perform
>>>>>> HTTP POST request. curl_easy_perform() says: Empty reply from server
>>>>>> Wed Sep 7 17:28:24 2011 [HOST][E]: Exception raised: Unable to
>>>>>> transport XML to server and get XML response back. Curl failed to
>>>>>> perform
>>>>>> HTTP POST request. curl_easy_perform() says: Empty reply from server
>>>>>> Wed Sep 7 17:28:24 2011 [HOST][E]: Exception raised: Unable to
>>>>>> transport XML to server and get XML response back. Curl failed to
>>>>>> perform
>>>>>> HTTP POST request. curl_easy_perform() says: Empty reply from server
>>>>>> Wed Sep 7 17:28:24 2011 [HOST][E]: Exception raised: Unable to
>>>>>> transport XML to server and get XML response back. Curl failed to
>>>>>> perform
>>>>>> HTTP POST request. curl_easy_perform() says: Empty reply from server
>>>>>> Wed Sep 7 17:28:24 2011 [POOL][E]: Could not retrieve pool info from
>>>>>> ONE
>>>>>> Wed Sep 7 17:28:24 2011 [POOL][E]: Could not retrieve pool info from
>>>>>> ONE*
>>>>>>
>>>>>> =====
>>>>>>
>>>>>> --
>>>>>> Regards,
>>>>>> Abhishek Kumar
>>>>>> https://sites.google.com/site/abhikumar163/
>>>>>>
>>>>>>
>>>>>> --
>>>>>> --------------ABK-----mail.signature--------------------
>>>>>> <http://www.blogger.com/profile/06276198262605731980><http://abhishekkr.deviantart.com/><http://www.facebook.com/aBionic><http://www.twitter.com/aBionic><http://sourceforge.net/users/abhishekkr><http://www.youtube.com/user/1ABK><http://in.linkedin.com/in/abionic>
>>>>>> -----------------------------------------------------------
>>>>>> ~=ABK=~
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Users mailing list
>>>>>> Users at lists.opennebula.org
>>>>>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
--
--
Regards,
Abhishek Kumar
https://sites.google.com/site/abhikumar163/
--
--------------ABK-----mail.signature--------------------
<http://www.blogger.com/profile/06276198262605731980><http://abhishekkr.deviantart.com/><http://www.facebook.com/aBionic><http://www.twitter.com/aBionic><http://sourceforge.net/users/abhishekkr><http://www.youtube.com/user/1ABK><http://in.linkedin.com/in/abionic>
-----------------------------------------------------------
~=ABK=~
More information about the Users
mailing list