[one-users] Issues when i integrate opennebula with vmware server

Wed Sep 2 06:25:04 PDT 2009

Hi Tino,

 Now I am trying with ESXI3.5. I don't have problem with onehost. Always it shows the informations. 
 But "onevm create" is not working. The vm state always in pending stage. If I fire "onevm deploy" command then tm_clone.sh script getting executed. But "onevm deloy" also gives error.

Find error details(vm.log) below
 2 17:54:10 2009 [TM][I]: tm_clone.sh: Cloning successfully completed
 2 17:54:10 2009 [LCM][I]: New VM state is BOOT
 2 17:54:10 2009 [VMM][E]: deploy_action, error getting driver vmm_vmware
 2 17:54:10 2009 [DiM][I]: New VM state is FAILED

Please help us resolve the issue

My doubt is 
Even though "onevm create" includes deploy operation , why there is need for "onevm deploy"  

Regards
marimuthu

-----Original Message-----
From: tinova79 at gmail.com [mailto:tinova79 at gmail.com] On Behalf Of Tino Vazquez
Sent: Tuesday, September 01, 2009 3:06 PM
To: Marimuthu Balasubramanian (WT01 - Innovation Group)
Cc: users at lists.opennebula.org
Subject: Re: [one-users] Issues when i integrate opennebula with vmware server

Hi marimuthu,

comments inline,

On Fri, Aug 28, 2009 at 1:44 PM, <marimuthu.balasubramanian at wipro.com> wrote:
> Hi Tino,
>
>        I have set the VM_DIR in oned.conf file . Seems to be the 
> "fileName" varilable in OneVmmVmware.java refered to 
> $ONE_LOCATION/var/eployment.0. Might be vmid is missing between "var" 
> and "deployment.0". I am making the required changes  in 
> OneVmmVmware.java to refer the right path 
> $ONE_LOCATION/var/<vmid>/deployment.0

That is strange, since OpenNebula will pass to the driver something like

$ONE_LOCATION/var/<vmid>/images/deployment.0

and then the driver will remove the "/images". Could you tell us what do you have in the "str" variable after line 87 ("str=in.readLine()").

>
>
> I am trying write code to generate vmx file. My question is Is their 
> any way to identify the path equivalnt to datastore?

In ESX hypervisors the datastore is located in /vmfs/volumes/<datastore_name>. In VMware server the prefix may vary, look in your filesystem for the <datastore_name>.

>
>
>       Some time onehost is not showing the informations. but When I 
> test with one_im_ware shell script it is wokring fine
>
> ./lib/mads/one_im_vmware --username <username> --password <password> 
> INIT INIT SUCCESS MONITOR 0 vmware-server.wipro.com MONITOR SUCCESS 0 
> HYPERVISOR=vmware,TOTALMEMORY=1048576,TOTALCPU=100,MODELNAME="System 
> Product 
> Name",CPUSPEED=2660,USEDCPU=0,FREECPU=100,USEDMEMORY=448790,FREEMEMORY
> =599786,NETTX=0,NETRX=0
>
> What coul~ be reason?

Couyld you send over the $ONE_LOCATION/var/oned.log? That may be a connection problem.

Best regards,

-Tino

>
> -----Original Message-----
> From: tinova79 at gmail.com [mailto:tinova79 at gmail.com] On Behalf Of Tino 
> Vazquez
> Sent: Friday, August 28, 2009 3:34 PM
> To: Marimuthu Balasubramanian (WT01 - Innovation Group)
> Cc: users at lists.opennebula.org
> Subject: Re: [one-users] Issues when i integrate opennebula with 
> vmware server
>
> Dear marimuthu,
>
> comments inline,
>
> On Fri, Aug 28, 2009 at 8:41 AM, <marimuthu.balasubramanian at wipro.com> wrote:
>> Hi,
>>
>>   I am trying to integrate opennebula with vmware server. i have 
>> installed opennebula 1.3.80 in front end m/c.  In one node machine i 
>> have installed vmware server.
>
> Many thanks for trying it out.
>
>>
>> Onehost creation is working fine.
>
> Good news!
>
>>
>> i have installed vmware ssh transfer manager scripts and I am using 
>> ssh transfer manager for vm creation. when I fire onevm command. the 
>> opennebula depends on following things.
>>
>> -> it is expecting deployment.0 file should be available in front end
>> machine under /opt/VM_DIR/1. (here /opt/VM_DIR is VM_DIR and 1 is vm
>> id) OneVmmVmware program is reading and parsing that file.
>> my question is
>> the same file is available under $ONE_LOCATION/var/1  but why it is 
>> reading from /opt/VM_DIR/1?
>
> Have you set VM_DIR in $ONE_LOCATION/etc/oned.conf?
>
>>
>> -> DeployVM program is refering the following vmxpath
>> [datastore] one-1/one-1.vmx. but the dir and file is not available on 
>> the node machine. the vmware server is expecting the same should be available.
>> so the vm creation is failing.
>
> I haven't test the ssh scripts with the vmware server, and I'm afraid that the DATASTORE path will be different (in ESX and ESXi they are stored under /vmfs/volumes, and that's harcoded). I need to test it under vmware server and probably make some changes. Meanwhile, if you point me what is the path to the DATASTORE in your vmware server I may be able to provide a quick patch.
>

--
Constantino Vázquez, Grid Technology Engineer/Researcher:
http://www.dsa-research.org/tinova
DSA Research Group: http://dsa-research.org Globus GridWay Metascheduler: http://www.GridWay.org OpenNebula Virtual Infrastructure Engine: http://www.OpenNebula.org

>>
>> My question is
>> how vmx file will get created?
>>
>
> OpenNebula doesn't offer VMware VM creation, you have to create it manually using the VMware Infrastructure Client (VIC).
>
>> NOte: I have manually created the vmx file and directory. After that 
>> vm creation is working fine using onevm command But only the local ip 
>> address is configured properly. but unable configure ip address using 
>> eth0 bridge.
>> My vm is running with ubuntu operating system. so i was trying to 
>> configure network using /etc/network/interfaces but when i run 
>> "/etc/init.d/networking restart" manually on the vm. I am getting 
>> following error.
>> unable to detect eth0 device.
>
> Assuming you have defined a network interface in your VM template (otherwise OpenNebula will leave the NICs defined upon VM creation).
> If so, take a look to the running VM with the VIC to see if any network interface is defined.
>
> My guess is that either there are none defined, or there is one defined and assigned to eth1, in which case you will have to reconfigure your ubuntu VM to configure that interface instead of eth0.
>
>>
>> please help me to resolve the issues.
>
> Please do not hesitate to ask further doubts. VMware server and the ssh scripts are the least tested configurations, but I am confident we can get it working.
>
> Regards,
>
> -Tino
>
>>
>> Regards
>> Marimuthu
>>
>> Please do not print this email unless it is absolutely necessary.
>>
>> The information contained in this electronic message and any 
>> attachments to this message are intended for the exclusive use of the
>> addressee(s) and may contain proprietary, confidential or privileged 
>> information. If you are not the intended recipient, you should not 
>> disseminate, distribute or copy this e-mail. Please notify the sender 
>> immediately and destroy all copies of this message and any attachments.
>>
>> WARNING: Computer viruses can be transmitted via email. The recipient 
>> should check this email and any attachments for the presence of 
>> viruses. The company accepts no liability for any damage caused by 
>> any virus transmitted by this email.
>>
>> www.wipro.com
>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.opennebula.org
>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>
>>
>
>
> --
> Constantino Vázquez, Grid Technology Engineer/Researcher:
> http://www.dsa-research.org/tinova
> DSA Research Group: http://dsa-research.org Globus GridWay 
> Metascheduler: http://www.GridWay.org OpenNebula Virtual 
> Infrastructure Engine: http://www.OpenNebula.org
>
> Please do not print this email unless it is absolutely necessary.
>
> The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments.
>
> WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.
>
> www.wipro.com
>

Please do not print this email unless it is absolutely necessary. 

The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. 

WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. 

www.wipro.com