[one-users] problem in configuring vmware hyper visor

Siva Prasad newror.user at gmail.com
Thu Nov 24 21:36:00 PST 2011


Thanks Tino For all your help.

The following worked , I installed vmware on port 443 (which is not 
default 8333).So virsh was trying to talk on the default https port 8333 
dats y it was failing so when I changed my uri to talk on to 443 it worked.

Thanks to my Manager :-)

--Siva

On 11/24/2011 10:54 PM, Siva Prasad wrote:
> Hi Tino,
>
> Thanks a lot  it worked it moved further. (now i know How stupid 
> mistake i was donig)
>
> virsh # connect gsx://10.3.3.48/?no_verify=1
> Enter username for 10.3.3.48 [root]: oneadmin
> Enter oneadmin's password for 10.3.3.48:
>
>
> I have configured the URI to be gsx in the vmwarerc file.(As my 
> hypervisor is Vmware server)
> I have provided oneadmin password as oneadmin which i configured in 
> vmwarerc file. And this oneadmin user is in the hypervisor macine and 
> i could login with this oneadmin user into the vmware server also.But 
> when I provide this password to the virsh  It stays there only without 
> any response (though the password is correct)
>
> Any thoughts ?
>
> -- Suser.
>
>
>
> On 11/24/2011 10:44 PM, Tino Vazquez wrote:
>> Hi,
>>
>> You don't need both connect and "-c". Try
>>
>> # connect esx://host/?no_verify=1
>>
>> Which version of libvirt are you using?
>>
>> Regards,
>>
>> -T
>>
>> --
>> Constantino Vázquez Blanco, MSc
>> Project Engineer
>> OpenNebula - The Open Source Toolkit for Data Center Virtualization
>> www.OpenNebula.org 
>> <http://www.opennebula.org/> | @tinova79 | @OpenNebula
>>
>>
>>
>> On Thu, Nov 24, 2011 at 6:05 PM, Siva Prasad <newror.user at gmail.com 
>> <mailto:newror.user at gmail.com>> wrote:
>>
>>     yes i have installed libvirt with ./configure --wtih-esxi
>>
>>     --Suser
>>
>>
>>     On 11/24/2011 10:30 PM, Tino Vazquez wrote:
>>>     Hi,
>>>
>>>     Do you have libvirt installed with VMware support? Which version
>>>     of libvirt is it?
>>>
>>>     Regards,
>>>
>>>     -Tino
>>>
>>>     --
>>>     Constantino Vázquez Blanco, MSc
>>>     Project Engineer
>>>     OpenNebula - The Open Source Toolkit for Data Center Virtualization
>>>     www.OpenNebula.org
>>>     <http://www.opennebula.org/> | @tinova79 | @OpenNebula
>>>
>>>
>>>
>>>     On Thu, Nov 24, 2011 at 5:33 PM, Siva Prasad
>>>     <newror.user at gmail.com <mailto:newror.user at gmail.com>> wrote:
>>>
>>>         HI Tino,
>>>
>>>         I was followoing 2.2 documentation itself.
>>>
>>>         So I had installed openNebula 2.2
>>>         and vmware addon 2.2 itself.
>>>
>>>         *Now  I get the following:*
>>>         ---------------------------------
>>>
>>>
>>>         virsh #  connect "-c gsx:// 10.3.3.48/?no_verify=1
>>>         <http://10.3.3.48/?no_verify=1>"
>>>
>>>         error: Failed to connect to the hypervisor
>>>         error: invalid argument: could not parse connection URI -c
>>>         gsx://10.3.3.48/?no_verify=1 <http://10.3.3.48/?no_verify=1>
>>>
>>>         virsh # connect -c gsx://10.3.3.48/?no_verify=1
>>>         <http://10.3.3.48/?no_verify=1>
>>>         error: unexpected data 'gsx://10.3.3.48/?no_verify=1
>>>         <http://10.3.3.48/?no_verify=1>'
>>>
>>>         virsh#
>>>
>>>         ------------------------------------------------------------
>>>
>>>         Actually my onevm commands  all work fine.( I know this has
>>>         nothing to do till i try to setup a host or launch a vm)
>>>         do we need to have the accessible nfs storage to the
>>>         hypervisor inorder *"virsh #  connect "-c gsx://
>>>         10.3.3.48/?no_verify=1 <http://10.3.3.48/?no_verify=1>" *to
>>>         work?
>>>
>>>
>>>         I have not yet shared a folder over Nfs.
>>>
>>>         Any help is appreciated.
>>>
>>>         Thanks,
>>>         Suser
>>>
>>>
>>>
>>>
>>>
>>>         On 11/24/2011 4:10 PM, Tino Vazquez wrote:
>>>>         Hi Siva,
>>>>
>>>>         comments inline,
>>>>
>>>>         On Thu, Nov 24, 2011 at 10:07 AM, Siva Prasad
>>>>         <newror.user at gmail.com <mailto:newror.user at gmail.com>> wrote:
>>>>
>>>>             Hi Guys,
>>>>
>>>>             I am setting up openNebula on ubuntu11.04. and I am
>>>>             trying to configure the VMwaresServer  hypervisor but
>>>>             no luck.The below are the steps i have done.
>>>>
>>>>             1) Installed ubuntu and openbnebula 2.0.1
>>>>
>>>>
>>>>         you are using a rather old version, i suggest you upgrade
>>>>         to the last stable (v3.0), or v2.2 if you want to use a
>>>>         stable version of the vmware drivers as well.
>>>>
>>>>             2) installed the libvirt.
>>>>             3) installed vmwareaddon 2.2
>>>>
>>>>
>>>>         vmware addon drivers 2.2 are compatible with opennebula 2.2
>>>>
>>>>             4) configured password and esx to gsx in the 
>>>>             /etc/one/vmwarerc file.(the same password is there on
>>>>             my vmware server hypervisor which I installed on
>>>>             windows XP).
>>>>             5) changed the datastore  in
>>>>             /etc/one/vmm_sh/vmm_sh_vmware.conf
>>>>
>>>>
>>>>             I could not connect to the hypervisor using hte virsh
>>>>             command line. I get the following error.
>>>>
>>>>             *virsh #* connect  10.3.3.48
>>>>             error: Failed to connect to the hypervisor
>>>>             error: no connection driver available for No connection
>>>>             for URI 10.3.3.48
>>>>
>>>>
>>>>         you need to connect with a "-c esx://<host>/?no_verify=1" URI
>>>>
>>>>
>>>>             *virsh #*
>>>>
>>>>
>>>>             I could ping 10.3.3.48
>>>>
>>>>             NOTE:Should I install certificate in the keystore. This
>>>>             is ubuntu 2.0.1 does it need  key in the keystore?  I
>>>>             thought theres no need to do this.
>>>>
>>>>
>>>>         No, you don't need to do this. Just out of curiosity, which
>>>>         documentation are you following?
>>>>
>>>>         Regards,
>>>>
>>>>         -T
>>>>
>>>>             Can anybody help me.
>>>>
>>>>             --Suser
>>>>
>>>>
>>>>
>>>>
>>>>             _______________________________________________
>>>>             Users mailing list
>>>>             Users at lists.opennebula.org
>>>>             <mailto:Users at lists.opennebula.org>
>>>>             http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>>>
>>>>
>>>
>>>
>>
>>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20111125/67a9a370/attachment-0003.htm>


More information about the Users mailing list