[one-users] problem in configuring vmware hyper visor

[Siva Prasad]

Hi Tino,

Thanks a lot  it worked it moved further. (now i know How stupid mistake 
i was donig)

virsh # connect gsx://10.3.3.48/?no_verify=1
Enter username for 10.3.3.48 [root]: oneadmin
Enter oneadmin's password for 10.3.3.48:


I have configured the URI to be gsx in the vmwarerc file.(As my 
hypervisor is Vmware server)
I have provided oneadmin password as oneadmin which i configured in 
vmwarerc file. And this oneadmin user is in the hypervisor macine and i 
could login with this oneadmin user into the vmware server also.But when 
I provide this password to the virsh  It stays there only without any 
response (though the password is correct)

Any thoughts ?

-- Suser.



On 11/24/2011 10:44 PM, Tino Vazquez wrote:
> Hi,
>
> You don't need both connect and "-c". Try
>
> # connect esx://host/?no_verify=1
>
> Which version of libvirt are you using?
>
> Regards,
>
> -T
>
> --
> Constantino Vázquez Blanco, MSc
> Project Engineer
> OpenNebula - The Open Source Toolkit for Data Center Virtualization
> www.OpenNebula.org <http://www.opennebula.org/> | @tinova79 | @OpenNebula
>
>
>
> On Thu, Nov 24, 2011 at 6:05 PM, Siva Prasad <newror.user at gmail.com 
> <mailto:newror.user at gmail.com>> wrote:
>
>     yes i have installed libvirt with ./configure --wtih-esxi
>
>     --Suser
>
>
>     On 11/24/2011 10:30 PM, Tino Vazquez wrote:
>>     Hi,
>>
>>     Do you have libvirt installed with VMware support? Which version
>>     of libvirt is it?
>>
>>     Regards,
>>
>>     -Tino
>>
>>     --
>>     Constantino Vázquez Blanco, MSc
>>     Project Engineer
>>     OpenNebula - The Open Source Toolkit for Data Center Virtualization
>>     www.OpenNebula.org
>>     <http://www.opennebula.org/> | @tinova79 | @OpenNebula
>>
>>
>>
>>     On Thu, Nov 24, 2011 at 5:33 PM, Siva Prasad
>>     <newror.user at gmail.com <mailto:newror.user at gmail.com>> wrote:
>>
>>         HI Tino,
>>
>>         I was followoing 2.2 documentation itself.
>>
>>         So I had installed openNebula 2.2
>>         and vmware addon 2.2 itself.
>>
>>         *Now  I get the following:*
>>         ---------------------------------
>>
>>
>>         virsh #  connect "-c gsx:// 10.3.3.48/?no_verify=1
>>         <http://10.3.3.48/?no_verify=1>"
>>
>>         error: Failed to connect to the hypervisor
>>         error: invalid argument: could not parse connection URI -c
>>         gsx://10.3.3.48/?no_verify=1 <http://10.3.3.48/?no_verify=1>
>>
>>         virsh # connect -c gsx://10.3.3.48/?no_verify=1
>>         <http://10.3.3.48/?no_verify=1>
>>         error: unexpected data 'gsx://10.3.3.48/?no_verify=1
>>         <http://10.3.3.48/?no_verify=1>'
>>
>>         virsh#
>>
>>         ------------------------------------------------------------
>>
>>         Actually my onevm commands  all work fine.( I know this has
>>         nothing to do till i try to setup a host or launch a vm)
>>         do we need to have the accessible nfs storage to the
>>         hypervisor inorder *"virsh #  connect "-c gsx://
>>         10.3.3.48/?no_verify=1 <http://10.3.3.48/?no_verify=1>" *to work?
>>
>>
>>         I have not yet shared a folder over Nfs.
>>
>>         Any help is appreciated.
>>
>>         Thanks,
>>         Suser
>>
>>
>>
>>
>>
>>         On 11/24/2011 4:10 PM, Tino Vazquez wrote:
>>>         Hi Siva,
>>>
>>>         comments inline,
>>>
>>>         On Thu, Nov 24, 2011 at 10:07 AM, Siva Prasad
>>>         <newror.user at gmail.com <mailto:newror.user at gmail.com>> wrote:
>>>
>>>             Hi Guys,
>>>
>>>             I am setting up openNebula on ubuntu11.04. and I am
>>>             trying to configure the VMwaresServer  hypervisor but no
>>>             luck.The below are the steps i have done.
>>>
>>>             1) Installed ubuntu and openbnebula 2.0.1
>>>
>>>
>>>         you are using a rather old version, i suggest you upgrade to
>>>         the last stable (v3.0), or v2.2 if you want to use a stable
>>>         version of the vmware drivers as well.
>>>
>>>             2) installed the libvirt.
>>>             3) installed vmwareaddon 2.2
>>>
>>>
>>>         vmware addon drivers 2.2 are compatible with opennebula 2.2
>>>
>>>             4) configured password and esx to gsx in the 
>>>             /etc/one/vmwarerc file.(the same password is there on my
>>>             vmware server hypervisor which I installed on windows XP).
>>>             5) changed the datastore  in
>>>             /etc/one/vmm_sh/vmm_sh_vmware.conf
>>>
>>>
>>>             I could not connect to the hypervisor using hte virsh
>>>             command line. I get the following error.
>>>
>>>             *virsh #* connect  10.3.3.48
>>>             error: Failed to connect to the hypervisor
>>>             error: no connection driver available for No connection
>>>             for URI 10.3.3.48
>>>
>>>
>>>         you need to connect with a "-c esx://<host>/?no_verify=1" URI
>>>
>>>
>>>             *virsh #*
>>>
>>>
>>>             I could ping 10.3.3.48
>>>
>>>             NOTE:Should I install certificate in the keystore. This
>>>             is ubuntu 2.0.1 does it need  key in the keystore?  I
>>>             thought theres no need to do this.
>>>
>>>
>>>         No, you don't need to do this. Just out of curiosity, which
>>>         documentation are you following?
>>>
>>>         Regards,
>>>
>>>         -T
>>>
>>>             Can anybody help me.
>>>
>>>             --Suser
>>>
>>>
>>>
>>>
>>>             _______________________________________________
>>>             Users mailing list
>>>             Users at lists.opennebula.org
>>>             <mailto:Users at lists.opennebula.org>
>>>             http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>>
>>>
>>
>>
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20111124/a0ca13bc/attachment-0003.htm>