[one-users] Fwd: Register VM for ESX 4.1

Jonathan Kelley jkelley at vm-labs.com
Thu Sep 16 06:57:59 PDT 2010
Previous message: [one-users] Fwd: Register VM for ESX 4.1
Next message: [one-users] Fwd: Register VM for ESX 4.1
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Hi Tino,

I think I am one step closer but I am still hitting an issue. Below is the
vm.log file for one-26 and I see the cp-r working as well as the mv command
working but something fails after that in placing the deployment.0 file in
the right directory.

root at vmlvsa251:/export/vg0-lv0# cat /srv/cloud/one/var/26/vm.log
Thu Sep 16 08:46:31 2010 [DiM][I]: New VM state is ACTIVE.
Thu Sep 16 08:46:31 2010 [LCM][I]: New VM state is PROLOG.
Thu Sep 16 08:46:31 2010 [VM][I]: Virtual Machine has no context
Thu Sep 16 08:50:58 2010 [TM][I]: tm_clone.sh:
vmlvsa251:/export/vg0-lv0/WinXP_32bit_Dev 12core.boston.vm-labs.com:
/export/vg0-lv0/26/images/disk.0
Thu Sep 16 08:50:58 2010 [TM][I]: tm_clone.sh: Cloning
vmlvsa251:/export/vg0-lv0/WinXP_32bit_Dev
Thu Sep 16 08:50:58 2010 [LCM][I]: New VM state is BOOT
Thu Sep 16 08:50:58 2010 [VMM][I]: Generating deployment file:
/srv/cloud/one/var/26/deployment.0
Thu Sep 16 08:50:58 2010 [VMM][E]: Error deploying virtual machine: Failed
deploying VM in host 12core.boston.vm-labs.com.
Thu Sep 16 08:50:59 2010 [DiM][I]: New VM state is FAILED
Thu Sep 16 08:50:59 2010 [TM][W]: Ignored: LOG - 26 tm_delete.sh: Deleting

Thu Sep 16 08:50:59 2010 [TM][W]: Ignored: LOG - 26 tm_delete.sh: Executed
"rm -rf /export/vg0-lv0/one-12core.boston.vm-labs.com:
/export/vg0-lv0/26/images".

Thu Sep 16 08:50:59 2010 [TM][W]: Ignored: TRANSFER SUCCESS 26 -


And the vmm_vmware.log is looking for this 26 directory to be in
/export/vg0-lv0. Am I missing some configuration parameter since it is found
in $ONE_LOCATION/var/ instead ?

[16.09.2010 08:50:58] Failed deploying VM 26 into
12core.boston.vm-labs.com.Reason:/export/vg0-lv0/26/deployment.0 (No such
file or directory)

Thanks,
Jon


On Thu, Sep 16, 2010 at 8:39 AM, Jonathan Kelley <jkelley at vm-labs.com>wrote:

> Hi Tino,
>
> There is a .vmx file resident in the WinXP_32bit_Dev folder but I didn't
> specify a full path for the disk attribute. If I specify the full path then
> the same problem occurs.
>
> Is it possible that the cp -r fails?
>
> Thanks,
> Jon
>
>
> On Wed, Sep 15, 2010 at 7:35 AM, Tino Vazquez <tinova at fdi.ucm.es> wrote:
>
>> Hi Jonathan,
>>
>> This is the piece of code that is failing
>>
>> ---
>>    VM_ID=`echo $DST | $SED -e 's/.*\/\([0-9]\+\)\/images\/.*/\1/'`
>>    cp -r $SRC_PATH $DATASTORE_PATH/one-$VM_ID &>/dev/null
>>    mv $DATASTORE_PATH/one-$VM_ID/*.vmx
>> $DATASTORE_PATH/one-$VM_ID/one-$VM_ID.vmx
>> ---
>>
>> More precisely, the "mv" is failing to find any ".vmx" file in
>> "/export/vg0-lv0/one-25/*.vmx", which is a copy of "WinXP_32bit_Dev"
>> (BTW, I don't know why this "WinXP_32bit_Dev" doesn't have a full
>> path, what does this VM template disk source attribute contain?).
>> Could you check there is a .vmx file in that "WinXP_32bit_Dev" folder?
>>
>> Regards,
>>
>> -Tino
>>
>> --
>> Constantino Vázquez Blanco | dsa-research.org/tinova
>> Virtualization Technology Engineer / Researcher
>> OpenNebula Toolkit | opennebula.org
>>
>>
>>
>> On Tue, Sep 14, 2010 at 10:51 PM, Jonathan Kelley <jkelley at vm-labs.com>
>> wrote:
>> >
>> > I have been fiddling with various options and templates and have gotten
>> > another interesting error case (see log output below). It seems as
>> though
>> > directories are failing to be created or something. Is it possible that
>> I
>> > have a permissions issue or something? Everything is running as root and
>> the
>> > permissions are root on the local NFS directory but my NFS mount is wide
>> > open.
>> > I would be curious to hear from other OpenNebula users how they have
>> their
>> > ESX environment configured as this seems as though it should be more
>> > straightforward.
>> > -Jon
>> > root at vmlvsa251:/export/vg0-lv0# cat /srv/cloud/one/var/25/vm.log
>> > Tue Sep 14 16:39:38 2010 [DiM][I]: New VM state is ACTIVE.
>> > Tue Sep 14 16:39:39 2010 [LCM][I]: New VM state is PROLOG.
>> > Tue Sep 14 16:39:39 2010 [VM][I]: Virtual Machine has no context
>> > Tue Sep 14 16:39:39 2010 [TM][I]: Command execution fail:
>> > /srv/cloud/one/lib/tm_commands/vmware/tm_clone.sh
>> vmlvsa251:WinXP_32bit_Dev
>> > 12core.boston.vm-labs.com:/export/vg0-lv0/25/images/disk.0
>> > Tue Sep 14 16:39:39 2010 [TM][I]: STDERR follows.
>> > Tue Sep 14 16:39:39 2010 [TM][I]: mv: cannot stat
>> > `/export/vg0-lv0/one-25/*.vmx': No such file or directory
>> > Tue Sep 14 16:39:39 2010 [TM][I]: ExitCode: 1
>> > Tue Sep 14 16:39:39 2010 [TM][I]: tm_clone.sh: vmlvsa251:WinXP_32bit_Dev
>> > 12core.boston.vm-labs.com:/export/vg0-lv0/25/images/disk.0
>> > Tue Sep 14 16:39:39 2010 [TM][I]: tm_clone.sh: Cloning
>> > vmlvsa251:WinXP_32bit_Dev
>> > Tue Sep 14 16:39:39 2010 [TM][E]: Error excuting image transfer script:
>> > Error message not available
>> > Tue Sep 14 16:39:39 2010 [DiM][I]: New VM state is FAILED
>> > Tue Sep 14 16:39:39 2010 [TM][W]: Ignored: LOG - 25 tm_delete.sh:
>> Deleting
>> > Tue Sep 14 16:39:39 2010 [TM][W]: Ignored: LOG - 25 tm_delete.sh:
>> Executed
>> > "rm -rf
>> > /export/vg0-lv0/one-12core.boston.vm-labs.com:
>> /export/vg0-lv0/25/images".
>> > Tue Sep 14 16:39:39 2010 [TM][W]: Ignored: TRANSFER SUCCESS 25 -
>> > -Jon
>> >
>> > On Tue, Sep 14, 2010 at 1:03 PM, Jonathan Kelley <jkelley at vm-labs.com>
>> > wrote:
>> >>
>> >> Hi Tino,
>> >> I found this in my ESX log given the instructions you specified below:
>> >> [2010-09-14 16:56:55.564 22281B90 info 'TaskManager'] Task Created :
>> >> haTask-ha-folder-vm-vim.Folder.registerVm-67171
>> >> [2010-09-14 16:56:55.564 22CEFB90 info 'ha-folder-vm'] Register called:
>> >> [datastore1]one-16/one-16.vmx
>> >> [2010-09-14 16:56:55.570 22CEFB90 info 'VMFileChecker'] Config rules
>> file
>> >> '/etc/vmware/configrules' loaded and parsed successfully.
>> >> [2010-09-14 16:56:55.571 22CEFB90 warning 'Vmsvc'] RegisterVm file
>> check
>> >> error: IO error
>> >> [2010-09-14 16:56:55.574 22CEFB90 info 'App'] AdapterServer caught
>> >> exception: 08c82f88
>> >> [2010-09-14 16:56:55.574 22CEFB90 info 'TaskManager'] Task Completed :
>> >> haTask-ha-folder-vm-vim.Folder.registerVm-67171 Status error
>> >>
>> >> This is from the vmm_vmware.log:
>> >> [14.09.2010 12:57:34] Failed deploying VM 16 into
>> >> 12core.boston.vm-labs.com.Reason:null
>> >> This is from the $ONE_LOCATION/var/16/vm.log:
>> >> Tue Sep 14 12:57:31 2010 [DiM][I]: New VM state is ACTIVE.
>> >> Tue Sep 14 12:57:31 2010 [LCM][I]: New VM state is PROLOG.
>> >> Tue Sep 14 12:57:31 2010 [VM][I]: Virtual Machine has no context
>> >> Tue Sep 14 12:57:31 2010 [LCM][I]: New VM state is BOOT
>> >> Tue Sep 14 12:57:31 2010 [VMM][I]: Generating deployment file:
>> >> /srv/cloud/one/var/16/deployment.0
>> >> Tue Sep 14 12:57:34 2010 [VMM][E]: Error deploying virtual machine:
>> Failed
>> >> deploying VM in host 12core.boston.vm-labs.com.
>> >> Tue Sep 14 12:57:35 2010 [DiM][I]: New VM state is FAILED
>> >> Tue Sep 14 12:57:35 2010 [TM][W]: Ignored: LOG - 16 tm_delete.sh:
>> Deleting
>> >> Tue Sep 14 12:57:35 2010 [TM][W]: Ignored: LOG - 16 tm_delete.sh:
>> Executed
>> >> "rm -rf
>> >> /export/vg0-lv0/one-12core.boston.vm-labs.com:
>> /srv/cloud/one/var//16/images".
>> >> Tue Sep 14 12:57:35 2010 [TM][W]: Ignored: TRANSFER SUCCESS 16 -
>> >>
>> >> Does this help debug the situation?
>> >> Thanks,
>> >> Jon
>> >>
>> >> On Mon, Sep 13, 2010 at 6:58 AM, Tino Vazquez <tinova at fdi.ucm.es>
>> wrote:
>> >>>
>> >>> Hi Jonathan,
>> >>>
>> >>> To define an OpenNebula VMware template you need to set as the source
>> >>> for the DISK the folder where all the VMware related VM files are
>> >>> placed.
>> >>>
>> >>> About the error you are experiencing, the configuration should be
>> >>> (assuming you are using the tm_vmware driver, i discourage the use of
>> >>> the tm_vmware_ssh prototype transfer driver):
>> >>>
>> >>> * No VM_DIR set in oned.conf
>> >>> * DATASTORE_PATH in the TM configuration should point to a local path
>> >>> in the OpenNebula front-end that is used as the NFS export which the
>> >>> ESXs mount as their DATASTORE.
>> >>>
>> >>> If this is correctly set, we will need to take a look at the log of
>> >>> the vmm driver to see exactly what is failing.
>> >>>
>> >>> Best regards,
>> >>>
>> >>> -Tino
>> >>>
>> >>> --
>> >>> Constantino Vázquez Blanco | dsa-research.org/tinova
>> >>> Virtualization Technology Engineer / Researcher
>> >>> OpenNebula Toolkit | opennebula.org
>> >>>
>> >>>
>> >>>
>> >>> On Thu, Sep 9, 2010 at 7:04 PM, Jonathan Kelley <jkelley at vm-labs.com>
>> >>> wrote:
>> >>> > Hi Tino,
>> >>> > It was set but unsetting it didn't change the issue except now that
>> >>> > path
>> >>> > after the host has changed to be invalid it seems.
>> >>> > Thu Sep  9 13:01:32 2010 [DiM][D]: Deploying VM 15
>> >>> > Thu Sep  9 13:01:32 2010 [TM][D]: Message received: TRANSFER SUCCESS
>> 15
>> >>> > -
>> >>> > Thu Sep  9 13:01:40 2010 [VMM][D]: Message received: DEPLOY FAILURE
>> 15
>> >>> > Failed deploying VM in host esxhost
>> >>> > Thu Sep  9 13:01:41 2010 [ReM][D]: VirtualMachinePoolInfo method
>> >>> > invoked
>> >>> > Thu Sep  9 13:01:41 2010 [TM][D]: Message received: LOG - 15
>> >>> > tm_delete.sh:
>> >>> > Deleting
>> >>> > Thu Sep  9 13:01:41 2010 [TM][D]: Message received: LOG - 15
>> >>> > tm_delete.sh:
>> >>> > Executed "rm -rf
>> >>> > /export/vg0-lv0/esxhost:/srv/cloud/one/var//15/images".
>> >>> > Thu Sep  9 13:01:41 2010 [TM][D]: Message received: TRANSFER SUCCESS
>> 15
>> >>> > -
>> >>> > Thanks,
>> >>> > Jon
>> >>> >
>> >>> > On Thu, Sep 9, 2010 at 12:59 PM, Tino Vazquez <tinova at fdi.ucm.es>
>> >>> > wrote:
>> >>> >>
>> >>> >> Hi Jonathan,
>> >>> >>
>> >>> >> One further question, did you set the VM_DIR in oned.conf? If so,
>> try
>> >>> >> to unset it.
>> >>> >>
>> >>> >> Regards,
>> >>> >>
>> >>> >> -Tino
>> >>> >>
>> >>> >> --
>> >>> >> Constantino Vázquez Blanco | dsa-research.org/tinova
>> >>> >> Virtualization Technology Engineer / Researcher
>> >>> >> OpenNebula Toolkit | opennebula.org
>> >>> >>
>> >>> >>
>> >>> >>
>> >>> >> On Tue, Sep 7, 2010 at 4:30 PM, Jonathan Kelley <
>> jkelley at vm-labs.com>
>> >>> >> wrote:
>> >>> >> > Hi Tino,
>> >>> >> > Yes my file looks like the following:
>> >>> >> > root at vmlvsa251:/srv/cloud/one# cat etc/tm_vmware/tm_vmwarerc
>> >>> >> > #
>> >>> >> >
>> >>> >> >
>> --------------------------------------------------------------------------
>> >>> >> > #
>> >>> >> > # Copyright 2002-2010, OpenNebula Project Leads (OpenNebula.org)
>> >>> >> > #
>> >>> >> > #
>> >>> >> >  #
>> >>> >> > # Licensed under the Apache License, Version 2.0 (the "License");
>> >>> >> > you
>> >>> >> > may
>> >>> >> >  #
>> >>> >> > # not use this file except in compliance with the License. You
>> may
>> >>> >> > obtain
>> >>> >> >  #
>> >>> >> > # a copy of the License at
>> >>> >> > #
>> >>> >> > #
>> >>> >> >  #
>> >>> >> > # http://www.apache.org/licenses/LICENSE-2.0
>> >>> >> > #
>> >>> >> > #
>> >>> >> >  #
>> >>> >> > # Unless required by applicable law or agreed to in writing,
>> >>> >> > software
>> >>> >> >  #
>> >>> >> > # distributed under the License is distributed on an "AS IS"
>> BASIS,
>> >>> >> >  #
>> >>> >> > # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
>> >>> >> > implied.
>> >>> >> > #
>> >>> >> > # See the License for the specific language governing permissions
>> >>> >> > and
>> >>> >> >  #
>> >>> >> > # limitations under the License.
>> >>> >> > #
>> >>> >> >
>> >>> >> >
>> >>> >> >
>> #---------------------------------------------------------------------------
>> >>> >> > #
>> >>> >> > # Uncomment the following line to active MAD debug
>> >>> >> > ONE_MAD_DEBUG=1
>> >>> >> > # Local path of the datastore
>> >>> >> > DATASTORE_PATH=/export/vg0-lv0
>> >>> >> >
>> >>> >> > Let me know if there is something else needed.
>> >>> >> > Thanks,
>> >>> >> > Jon
>> >>> >> >
>> >>> >> > On Fri, Sep 3, 2010 at 1:07 PM, Tino Vazquez <tinova at fdi.ucm.es>
>> >>> >> > wrote:
>> >>> >> >>
>> >>> >> >> Hi Jonathan,
>> >>> >> >>
>> >>> >> >> Have you set the OpenNebula local path that is mounted as
>> >>> >> >> datastore1
>> >>> >> >> in the ESX in
>> >>> >> >>
>> >>> >> >> * $ONE_LOCATION/etc/tm_vmware/tm_vmwarerc --> variable
>> >>> >> >> DATASTORE_PATH
>> >>> >> >>
>> >>> >> >> ?
>> >>> >> >>
>> >>> >> >> Regards,
>> >>> >> >>
>> >>> >> >> -Tino
>> >>> >> >> --
>> >>> >> >> Constantino Vázquez Blanco | dsa-research.org/tinova
>> >>> >> >> Virtualization Technology Engineer / Researcher
>> >>> >> >> OpenNebula Toolkit | opennebula.org
>> >>> >> >>
>> >>> >> >>
>> >>> >> >>
>> >>> >> >> On Thu, Sep 2, 2010 at 6:05 PM, Jonathan Kelley
>> >>> >> >> <jkelley at vm-labs.com>
>> >>> >> >> wrote:
>> >>> >> >> >
>> >>> >> >> > Hi Tino,
>> >>> >> >> > I think I am getting a little farther in that I was trying to
>> use
>> >>> >> >> > the
>> >>> >> >> > onevm
>> >>> >> >> > create <image> instead of registering (which worked but not
>> sure
>> >>> >> >> > it
>> >>> >> >> > helps).
>> >>> >> >> > However it fails to create the vm and I find this message in
>> the
>> >>> >> >> > vmm_vmware.log:
>> >>> >> >> > [02.09.2010 11:57:44] Failed deploying VM 1 into
>> >>> >> >> > 12core.xxxxx.com.Reason:/export/vg0-lv0/1/deployment.0 (No
>> such
>> >>> >> >> > file
>> >>> >> >> > or
>> >>> >> >> > directory)
>> >>> >> >> > with these messages in the oned.log:
>> >>> >> >> > Thu Sep  2 11:57:43 2010 [DiM][D]: Deploying VM 1
>> >>> >> >> > Thu Sep  2 11:57:43 2010 [ReM][D]: VirtualMachinePoolInfo
>> method
>> >>> >> >> > invoked
>> >>> >> >> > Thu Sep  2 11:57:43 2010 [TM][D]: Message received: TRANSFER
>> >>> >> >> > SUCCESS
>> >>> >> >> > 1 -
>> >>> >> >> > Thu Sep  2 11:57:44 2010 [VMM][D]: Message received: DEPLOY
>> >>> >> >> > FAILURE 1
>> >>> >> >> > Failed
>> >>> >> >> > deploying VM in host 12core.boston.vm-labs.com.
>> >>> >> >> > Thu Sep  2 11:57:44 2010 [TM][D]: Message received: LOG - 1
>> >>> >> >> > tm_delete.sh:
>> >>> >> >> > Deleting
>> >>> >> >> > Thu Sep  2 11:57:44 2010 [TM][D]: Message received: LOG - 1
>> >>> >> >> > tm_delete.sh:
>> >>> >> >> > Executed "rm -rf
>> >>> >> >> > /export/vg0-lv0/one-12core.xxxxx.com:
>> /export/vg0-lv0/1/images".
>> >>> >> >> > Thu Sep  2 11:57:44 2010 [TM][D]: Message received: TRANSFER
>> >>> >> >> > SUCCESS
>> >>> >> >> > 1 -
>> >>> >> >> > Any tips with these messages?
>> >>> >> >> > I have a single NFS mount on the ESX host as datastore1 and is
>> a
>> >>> >> >> > local
>> >>> >> >> > path
>> >>> >> >> > to the OpenNebula front-end.
>> >>> >> >> > -Jon
>> >>> >> >> >
>> >>> >> >> >
>> >>> >> >> > On Thu, Sep 2, 2010 at 11:39 AM, Jonathan Kelley
>> >>> >> >> > <jkelley at vm-labs.com>
>> >>> >> >> > wrote:
>> >>> >> >> >>
>> >>> >> >> >> Hi Tino,
>> >>> >> >> >> Thanks for the quick reply.
>> >>> >> >> >>  How do you specify a VM PATH though as my VM has 5-6
>> associated
>> >>> >> >> >> files?
>> >>> >> >> >> Here is the example given:
>> >>> >> >> >>
>> >>> >> >> >> NAME          = "Ubuntu Web Development"
>> >>> >> >> >> PATH          = /home/one_user/images/ubuntu_desktop.img
>> >>> >> >> >> PUBLIC        = YES
>> >>> >> >> >> DESCRIPTION   = "Ubuntu 10.04 desktop for Web Development
>> >>> >> >> >> students.
>> >>> >> >> >> Contains the pdf lessons and exercises as well as all the
>> >>> >> >> >> necessary
>> >>> >> >> >> programming tools and testing frameworks."
>> >>> >> >> >>
>> >>> >> >> >> For my Windows XP I have two disk files so how do I specify
>> two
>> >>> >> >> >> files
>> >>> >> >> >> in
>> >>> >> >> >> the PATH field? Or do I specify the vmx file?
>> >>> >> >> >> Thanks again,
>> >>> >> >> >> -Jon
>> >>> >> >> >>
>> >>> >> >> >> On Thu, Sep 2, 2010 at 11:29 AM, Tino Vazquez
>> >>> >> >> >> <tinova at fdi.ucm.es>
>> >>> >> >> >> wrote:
>> >>> >> >> >>>
>> >>> >> >> >>> Hi Jonathan,
>> >>> >> >> >>>
>> >>> >> >> >>> The way to use the image catalog is to upload individual
>> >>> >> >> >>> images,
>> >>> >> >> >>> each
>> >>> >> >> >>> of them requiring an image template [1].
>> >>> >> >> >>>
>> >>> >> >> >>> One registered, a VM can use an image by just referencing
>> the
>> >>> >> >> >>> image's
>> >>> >> >> >>> name (same as the VirtualNetwork from your template, using
>> just
>> >>> >> >> >>> the
>> >>> >> >> >>> name "VMWareNET").
>> >>> >> >> >>>
>> >>> >> >> >>> Regards,
>> >>> >> >> >>>
>> >>> >> >> >>> -Tino
>> >>> >> >> >>>
>> >>> >> >> >>> [1] http://opennebula.org/documentation:rel2.0:img_template
>> >>> >> >> >>> --
>> >>> >> >> >>> Constantino Vázquez Blanco | dsa-research.org/tinova
>> >>> >> >> >>> Virtualization Technology Engineer / Researcher
>> >>> >> >> >>> OpenNebula Toolkit | opennebula.org
>> >>> >> >> >>>
>> >>> >> >> >>>
>> >>> >> >> >>>
>> >>> >> >> >>> On Thu, Sep 2, 2010 at 4:57 PM, Jonathan Kelley
>> >>> >> >> >>> <jkelley at vm-labs.com>
>> >>> >> >> >>> wrote:
>> >>> >> >> >>> > Hello,
>> >>> >> >> >>> > I am trying to register my VM to use with OpenNebula and
>> ESX
>> >>> >> >> >>> > 4.1.
>> >>> >> >> >>> > I copied the VM folder to the shared nfs storage and then
>> >>> >> >> >>> > have
>> >>> >> >> >>> > tried
>> >>> >> >> >>> > to
>> >>> >> >> >>> > create a template for this vm but I am not sure I have it
>> >>> >> >> >>> > right:
>> >>> >> >> >>> > root at xxxx:/srv/cloud/one# cat
>> /export/vg0-lv0/WinXP.template
>> >>> >> >> >>> > NAME=VMwareVM
>> >>> >> >> >>> > MEMORY=256
>> >>> >> >> >>> > CPU=1
>> >>> >> >> >>> > NIC=[NETWORK="VMWareNet"]
>> >>> >> >> >>> > DISK=[ source="/export/vg0-lv0/WinXP_32bit_Dev",
>> >>> >> >> >>> >        clone="yes",
>> >>> >> >> >>> >        save="no"]
>> >>> >> >> >>> > However when I run the register command I get image not
>> >>> >> >> >>> > present
>> >>> >> >> >>> > messages:
>> >>> >> >> >>> > root at xxxx:/export/vg0-lv0# /srv/cloud/one/bin/oneimage
>> >>> >> >> >>> > register
>> >>> >> >> >>> > ./WinXP.template
>> >>> >> >> >>> > Error: Image not present, aborting.
>> >>> >> >> >>> >
>> >>> >> >> >>> > It is not quite clear to me what the template should look
>> >>> >> >> >>> > like
>> >>> >> >> >>> > and
>> >>> >> >> >>> > how
>> >>> >> >> >>> > to
>> >>> >> >> >>> > register an existing VMware VM.
>> >>> >> >> >>> > Thanks,
>> >>> >> >> >>> > Jon
>> >>> >> >> >>> >
>> >>> >> >> >>> > _______________________________________________
>> >>> >> >> >>> > Users mailing list
>> >>> >> >> >>> > Users at lists.opennebula.org
>> >>> >> >> >>> >
>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >>> >> >> >>> >
>> >>> >> >> >>> >
>> >>> >> >> >>
>> >>> >> >> >
>> >>> >> >> >
>> >>> >> >> >
>> >>> >> >> > _______________________________________________
>> >>> >> >> > Users mailing list
>> >>> >> >> > Users at lists.opennebula.org
>> >>> >> >> > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >>> >> >> >
>> >>> >> >> >
>> >>> >> >
>> >>> >> >
>> >>> >
>> >>> >
>> >>
>> >
>> >
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20100916/3096cd0a/attachment-0003.htm>
Previous message: [one-users] Fwd: Register VM for ESX 4.1
Next message: [one-users] Fwd: Register VM for ESX 4.1
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the Users mailing list