<div dir="ltr"><div>dear opennebula community,<br><br>follow the process to create VMWARE ESXi5.0 VMs using OpenNebula, every steps are working fine, e.g. get below return when run "/srv/cloud/one/var/remotes/im/run_probes vmware 0 esxi01"<br>
<div><br>HYPERVISOR=vmware TOTALCPU=400 FREECPU=400 CPUSPEED=3192 TOTALMEMORY=8106080<br>
FREEMEMORY=6484864<br><br>but when run "onehost create esxi01 im_vmware vmm_vmware tm_vmware dummy", get below error:<br>
<p style="margin-bottom:0cm">Wrong number of arguments<br>The arguments should be: <hostname></p></div><br>did some research, can't find a solution for this.<br><br></div><div>it is much appreciated if anyone can help.<br>
<br></div><div>kind regards,<br></div><div>q.s.</div><br></div><div class="gmail_extra"><br><br><div class="gmail_quote">On Fri, Jan 10, 2014 at 4:44 PM, Qiubo Su (David Su) <span dir="ltr"><<a href="mailto:qiubosu@gmail.com" target="_blank">qiubosu@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><div><div><div><div>Dear OpenNebula Community,<br><br>In the "VMware Configuration" section of "VMware Drivers 3.8" in the page of <a href="http://archives.opennebula.org/documentation:archives:rel3.8:evmwareg" target="_blank">http://archives.opennebula.org/documentation:archives:rel3.8:evmwareg</a>, below information is for setting "The access via SSH needs to be passwordless":<br>
<pre>$ su -
$ mkdir /etc/ssh/keys-oneadmin
$ chmod 755 /etc/ssh/keys-oneadmin
$ su - oneadmin
$ vi /etc/ssh/keys-oneadmin/authorized_keys
<paste here the contents of the oneadmin's front-end account public key (FE -> $HOME/.ssh/id_{rsa,dsa}.pub) and exit vi>
$ chmod 600 /etc/ssh/keys-oneadmin/authorized_keys</pre>After the setup, can access via ESXI server from front end server through SSH without password, however when reboot the ESXI server, the setup is disappeared, i.e. the /keys-oneadmin/ folder and the authorized_keys file are disappeared after reboot the ESXI server.<br>
<br></div>It is much appreciated if you can help with why the setup disappeared and how to resolve it?<br><br></div>By the way, the front end server is with Ubuntu 12.04 OS and OpenNebula 3.8.1, the ESXI server is with CentOS 5.10 OS.<br>
<br></div>Thanks kindly,<br></div>Q.S.<br></div><div class="HOEnZb"><div class="h5"><div class="gmail_extra"><br><br><div class="gmail_quote">On Sun, Dec 15, 2013 at 11:57 AM, Qiubo Su (David Su) <span dir="ltr"><<a href="mailto:qiubosu@gmail.com" target="_blank">qiubosu@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">Dear OpenNebula Community,<br><br><div><div><div><div></div>I want to install VMware ESXI 5.5, 5.1 and 5.0 onto the PC with <span>Asus</span> P5QPL-AM motherboard and Intel E6750 CPU, but got below error:<br>
<p><em>No network adapters were detected. Either no network adapters are
physically connected to the system, or a suitable driver could not be
located. A third party driver may required.</em></p>
<p><em>Ensure that there is at least one network adapter physically
connected to the system before attempting installation. If the problem
persists, consult the VMware Knowledge Base.</em></p>The PC does have a network adapter, and the Linux OS installed can access to Internet through the Ethernet card with no problem.<br><br></div>This doesn't look like the compatibility issue, due to get the same error when trying to install VMware ESXI 5.5, 5.1 and 5.0 onto the same PC.<br>
<br></div><div>It is much appreciated if you can help with this.<br><br></div><div>Moreover I have been using KVM as hypervisor, and it has been no issue, so easy to use.<br>
<br></div>Thanks kindly,<br></div>Q.S<br></div>
</blockquote></div><br></div>
</div></div></blockquote></div><br></div>