Hi,<div>how do I update a virtual network template to 'extend' the defined IP range?</div><div><br></div><div>This is the vn template I need to update:</div><div><br></div><div><div>onevnet show 13 </div><div>VIRTUAL NETWORK 13 INFORMATION                                                  </div>

<div>ID             : 13                  </div><div>NAME           : vlan-2000           </div><div>USER           : oneadmin            </div><div>GROUP          : oneadmin            </div><div>CLUSTER        : -                   </div>

<div>TYPE           : RANGED              </div><div>BRIDGE         : onebr13             </div><div>VLAN           : Yes                 </div><div>PHYSICAL DEVICE: eth0                </div><div>VLAN ID        : 2000                </div>

<div>USED LEASES    : 16                  </div><div><br></div><div>PERMISSIONS                                                                     </div><div>OWNER          : uma                 </div><div>GROUP          : ---                 </div>

<div>OTHER          : ---                 </div><div><br></div><div>VIRTUAL NETWORK TEMPLATE                                                        </div><div><br></div><div><br></div><div>RANGE                                                                           </div>

<div>IP_START       : 10.0.0.1            </div><div>IP_END         : 10.0.0.20           </div><div><br></div><div>LEASES ON HOLD                                                                  </div><div>LEASE=[ IP="10.0.0.1", MAC="02:00:0a:00:00:01", USED="1", VID="-1" ]</div>

<div><br></div><div>USED LEASES                                                                     </div><div>LEASE=[ IP="10.0.0.2", MAC="02:00:0a:00:00:02", USED="1", VID="149" ]</div>

<div>LEASE=[ IP="10.0.0.3", MAC="02:00:0a:00:00:03", USED="1", VID="150" ]</div><div>LEASE=[ IP="10.0.0.4", MAC="02:00:0a:00:00:04", USED="1", VID="151" ]</div>

<div>LEASE=[ IP="10.0.0.5", MAC="02:00:0a:00:00:05", USED="1", VID="152" ]</div><div>LEASE=[ IP="10.0.0.6", MAC="02:00:0a:00:00:06", USED="1", VID="153" ]</div>

<div>LEASE=[ IP="10.0.0.7", MAC="02:00:0a:00:00:07", USED="1", VID="154" ]</div><div>LEASE=[ IP="10.0.0.8", MAC="02:00:0a:00:00:08", USED="1", VID="155" ]</div>

<div>LEASE=[ IP="10.0.0.9", MAC="02:00:0a:00:00:09", USED="1", VID="156" ]</div><div>LEASE=[ IP="10.0.0.10", MAC="02:00:0a:00:00:0a", USED="1", VID="157" ]</div>

<div>LEASE=[ IP="10.0.0.11", MAC="02:00:0a:00:00:0b", USED="1", VID="158" ]</div><div>LEASE=[ IP="10.0.0.12", MAC="02:00:0a:00:00:0c", USED="1", VID="159" ]</div>

<div>LEASE=[ IP="10.0.0.13", MAC="02:00:0a:00:00:0d", USED="1", VID="160" ]</div><div>LEASE=[ IP="10.0.0.14", MAC="02:00:0a:00:00:0e", USED="1", VID="161" ]</div>

<div>LEASE=[ IP="10.0.0.15", MAC="02:00:0a:00:00:0f", USED="1", VID="162" ]</div><div>LEASE=[ IP="10.0.0.16", MAC="02:00:0a:00:00:10", USED="1", VID="163" ]</div>

</div><div><br></div><div><br></div><div><br></div><div>When I try to "onevnet update 13" (where 13 is the ID of the vn template to modify), i'm shown an empty editor page.</div><div><br></div><div>If I try to "onevnet addleases 13 10.0.0.21",an error message reports that:</div>

<div>"[VirtualNetworkAddLeases] Error modifying network leases. Adding new leases is only supported for FIXED networks."</div><div><br></div><div>Maybe it is possible to connect directly to the database and edit the field 'IP_END' somewhere in there?</div>

<div><br></div><div>Best regards,</div><div>Valerio</div>