[one-users] unknown ethernet controller on windows imported image
Luca Uburti
luburti at ricca-it.com
Wed Sep 10 03:54:32 PDT 2014
Hello
I tried adding the model E1000 as you suggested, but now the Vm fails to
instantiate.
I tried specifying E1000, vmxnet3 and even Flexible as Model, but they
all give these errors,
The VM only deploys if I leave the Model field empty (but then I have no
connectivity)
I get these errors in the log:
Wed Sep 10 12:20:57 2014 [Z0][VMM][D]: Message received: LOG I 38
Command execution fail: /var/lib/one/remotes/vmm/vmware/deploy
'/var/lib/one/vms/38/deployment.0' '10.10.10.235' 38 10.10.10.235
Wed Sep 10 12:20:57 2014 [Z0][VMM][D]: Message received: LOG D 38
deploy: Successfully defined domain one-38.
Wed Sep 10 12:20:57 2014 [Z0][VMM][D]: Message received: LOG E 38
deploy: Error executing: virsh -c
'esx://10.10.10.235/?no_verify=1&auto_answer=1' start one-38 err:
ExitCode: 1
Wed Sep 10 12:20:57 2014 [Z0][VMM][D]: Message received: LOG I 38 out:
Wed Sep 10 12:20:57 2014 [Z0][VMM][D]: Message received: LOG I 38 error:
failed to get domain 'one-38'
Wed Sep 10 12:20:57 2014 [Z0][VMM][D]: Message received: LOG I 38 error:
Domain not found: No domain with name 'one-38'
Wed Sep 10 12:20:57 2014 [Z0][VMM][D]: Message received: LOG I 38
Wed Sep 10 12:20:57 2014 [Z0][VMM][D]: Message received: LOG E 38
deploy: Error executing: virsh -c
'esx://10.10.10.235/?no_verify=1&auto_answer=1' undefine one-38 err:
ExitCode: 1
Wed Sep 10 12:20:57 2014 [Z0][VMM][D]: Message received: LOG I 38 out:
Wed Sep 10 12:20:57 2014 [Z0][VMM][D]: Message received: LOG I 38 error:
failed to get domain 'one-38'
Wed Sep 10 12:20:57 2014 [Z0][VMM][D]: Message received: LOG I 38 error:
Domain not found: No domain with name 'one-38'
Wed Sep 10 12:20:57 2014 [Z0][VMM][D]: Message received: LOG I 38
Wed Sep 10 12:20:57 2014 [Z0][VMM][D]: Message received: LOG E 38
deploy: Error executing: virsh -c
'esx://10.10.10.235/?no_verify=1&auto_answer=1' undefine one-38 err:
ExitCode: 1
Il 09/09/2014 15:06, Valentin Bud ha scritto:
> Hello Luca,
>
> I think you must add MODEL="E1000" to the NIC section of
> the template. You can read about it in the documentation [1].
>
>
> [1]:
> http://docs.opennebula.org/4.8/user/references/template.html#network-section
>
> Best,
> Valentin
>
>
> On Tue, Sep 9, 2014 at 3:46 PM, Luca Uburti <luburti at ricca-it.com
> <mailto:luburti at ricca-it.com>> wrote:
>
> of course, here it is
>
> <VM>
> <ID>32</ID>
> <UID>0</UID>
> <GID>0</GID>
> <UNAME>oneadmin</UNAME>
> <GNAME>oneadmin</GNAME>
> <NAME>123</NAME>
> <PERMISSIONS>
> <OWNER_U>1</OWNER_U>
> <OWNER_M>1</OWNER_M>
> <OWNER_A>0</OWNER_A>
> <GROUP_U>0</GROUP_U>
> <GROUP_M>0</GROUP_M>
> <GROUP_A>0</GROUP_A>
> <OTHER_U>0</OTHER_U>
> <OTHER_M>0</OTHER_M>
> <OTHER_A>0</OTHER_A>
> </PERMISSIONS>
> <LAST_POLL>1410266708</LAST_POLL>
> <STATE>3</STATE>
> <LCM_STATE>3</LCM_STATE>
> <RESCHED>0</RESCHED>
> <STIME>1410189882</STIME>
> <ETIME>0</ETIME>
> <DEPLOY_ID>one-32</DEPLOY_ID>
> <MEMORY>742400</MEMORY>
> <CPU>3</CPU>
> <NET_TX>0</NET_TX>
> <NET_RX>0</NET_RX>
> <TEMPLATE>
> <AUTOMATIC_REQUIREMENTS><![CDATA[!(PUBLIC_CLOUD =
> YES)]]></AUTOMATIC_REQUIREMENTS>
> <CONTEXT>
> <DISK_ID><![CDATA[1]]></DISK_ID>
> <ETH0_DNS><![CDATA[8.8.8.8]]></ETH0_DNS>
> <ETH0_GATEWAY><![CDATA[10.222.1.254]]></ETH0_GATEWAY>
> <ETH0_IP><![CDATA[10.222.1.1]]></ETH0_IP>
> <ETH0_MAC><![CDATA[02:00:0a:de:01:01]]></ETH0_MAC>
> <ETH0_MASK><![CDATA[255.255.255.0]]></ETH0_MASK>
> <ETH0_NETWORK><![CDATA[10.222.1.0]]></ETH0_NETWORK>
> <NETWORK><![CDATA[YES]]></NETWORK>
> <TARGET><![CDATA[hdb]]></TARGET>
> </CONTEXT>
> <CPU><![CDATA[0.5]]></CPU>
> <DISK>
> <CLONE><![CDATA[YES]]></CLONE>
> <CLONE_TARGET><![CDATA[SYSTEM]]></CLONE_TARGET>
> <DATASTORE><![CDATA[default]]></DATASTORE>
> <DATASTORE_ID><![CDATA[1]]></DATASTORE_ID>
> <DEV_PREFIX><![CDATA[hd]]></DEV_PREFIX>
> <DISK_ID><![CDATA[0]]></DISK_ID>
> <IMAGE><![CDATA[w2k8r2]]></IMAGE>
> <IMAGE_ID><![CDATA[13]]></IMAGE_ID>
> <IMAGE_UNAME><![CDATA[oneadmin]]></IMAGE_UNAME>
> <LN_TARGET><![CDATA[NONE]]></LN_TARGET>
> <READONLY><![CDATA[NO]]></READONLY>
> <SAVE><![CDATA[NO]]></SAVE>
> <SIZE><![CDATA[20585]]></SIZE>
> <SOURCE><![CDATA[/vmfs/volumes/1/a84b8296fb47ece716d79137f273e014]]></SOURCE>
> <TARGET><![CDATA[hda]]></TARGET>
> <TM_MAD><![CDATA[vmfs]]></TM_MAD>
> <TYPE><![CDATA[FILE]]></TYPE>
> </DISK>
> <GRAPHICS>
> <LISTEN><![CDATA[0.0.0.0]]></LISTEN>
> <PORT><![CDATA[5932]]></PORT>
> <TYPE><![CDATA[VNC]]></TYPE>
> </GRAPHICS>
> <MEMORY><![CDATA[1024]]></MEMORY>
> <NIC>
> <AR_ID><![CDATA[0]]></AR_ID>
> <BRIDGE><![CDATA[vSwitch0]]></BRIDGE>
> <IP><![CDATA[10.222.1.1]]></IP>
> <MAC><![CDATA[02:00:0a:de:01:01]]></MAC>
> <NETWORK><![CDATA[dynamic_vmware_net]]></NETWORK>
> <NETWORK_ID><![CDATA[2]]></NETWORK_ID>
> <NETWORK_UNAME><![CDATA[oneadmin]]></NETWORK_UNAME>
> <NIC_ID><![CDATA[0]]></NIC_ID>
> <VLAN><![CDATA[YES]]></VLAN>
> <VLAN_ID><![CDATA[340]]></VLAN_ID>
> </NIC>
> <TEMPLATE_ID><![CDATA[3]]></TEMPLATE_ID>
> <VCPU><![CDATA[2]]></VCPU>
> <VMID><![CDATA[32]]></VMID>
> </TEMPLATE>
> <USER_TEMPLATE/>
> <HISTORY_RECORDS>
> <HISTORY>
> <OID>32</OID>
> <SEQ>0</SEQ>
> <HOSTNAME>10.10.10.236</HOSTNAME>
> <HID>4</HID>
> <CID>-1</CID>
> <STIME>1410189893</STIME>
> <ETIME>0</ETIME>
> <VMMMAD>vmware</VMMMAD>
> <VNMMAD>vmware</VNMMAD>
> <TMMAD>vmfs</TMMAD>
> <DS_LOCATION>/vmfs/volumes</DS_LOCATION>
> <DS_ID>0</DS_ID>
> <PSTIME>1410189893</PSTIME>
> <PETIME>1410190981</PETIME>
> <RSTIME>1410190981</RSTIME>
> <RETIME>0</RETIME>
> <ESTIME>0</ESTIME>
> <EETIME>0</EETIME>
> <REASON>0</REASON>
> <ACTION>0</ACTION>
> </HISTORY>
> </HISTORY_RECORDS>
> </VM>
>
>
>
> Il 09/09/2014 14:40, Tino Vazquez ha scritto:
>> Hi Luca,
>>
>> I fail to see the model type in the deployment file, it should
>> have something like the following:
>>
>> <interface type='bridge'>
>> ....
>> <model type='e1000'/>
>> </interface>
>>
>> can you share the VM template ("onevm show -x <vid>") as well?
>>
>> Best,
>>
>> -Tino
>>
>>
>> --
>> OpenNebula - Flexible Enterprise Cloud Made Simple
>>
>> --
>> Constantino Vázquez Blanco, PhD, MSc
>> Senior Infrastructure Architect at C12G Labs
>> www.c12g.com <http://www.c12g.com> | @C12G |
>> es.linkedin.com/in/tinova <http://es.linkedin.com/in/tinova>
>>
>> --
>> Confidentiality Warning: The information contained in this e-mail
>> and any accompanying documents, unless otherwise expressly
>> indicated, is confidential and privileged, and is intended solely
>> for the person and/or entity to whom it is addressed (i.e. those
>> identified in the "To" and "cc" box). They are the property of
>> C12G Labs S.L.. Unauthorized distribution, review, use,
>> disclosure, or copying of this communication, or any part
>> thereof, is strictly prohibited and may be unlawful. If you have
>> received this e-mail in error, please notify us immediately by
>> e-mail at abuse at c12g.com <mailto:abuse at c12g.com> and delete the
>> e-mail and attachments and any copy from your system. C12G thanks
>> you for your cooperation.
>>
>> On 9 September 2014 12:52, Luca Uburti <luburti at ricca-it.com
>> <mailto:luburti at ricca-it.com>> wrote:
>>
>> Hello, I have attached those two files
>>
>> thank you
>>
>> Il 09/09/2014 12:22, Tino Vazquez ha scritto:
>>> Hi Luca,
>>>
>>> Ok, let's see if we can get to the bottom of this issue.
>>>
>>> Could you provide the deployment file of the VM? It is
>>> placed in the front-end, under
>>> /var/lib/one/datastores/<ds_id>/deployment.0, where ds_id is
>>> the id of the system datastore (0, by default).
>>>
>>> Moreover, the .vmx file created in the ESX host can be of
>>> use. This would be placed in the ESX host, under
>>> /vmfs/volumes/<image_ds_id>/<vid>/disk.0/one-<vid>.vmx,
>>> where image_ds_id is the id of the image datastore, and vid
>>> is the id of the virtual machine as seen by OpenNebula.
>>>
>>> Best,
>>>
>>> -Tino
>>>
>>>
>>> --
>>> OpenNebula - Flexible Enterprise Cloud Made Simple
>>>
>>> --
>>> Constantino Vázquez Blanco, PhD, MSc
>>> Senior Infrastructure Architect at C12G Labs
>>> www.c12g.com <http://www.c12g.com> | @C12G |
>>> es.linkedin.com/in/tinova <http://es.linkedin.com/in/tinova>
>>>
>>> --
>>> Confidentiality Warning: The information contained in this
>>> e-mail and any accompanying documents, unless otherwise
>>> expressly indicated, is confidential and privileged, and is
>>> intended solely for the person and/or entity to whom it is
>>> addressed (i.e. those identified in the "To" and "cc" box).
>>> They are the property of C12G Labs S.L.. Unauthorized
>>> distribution, review, use, disclosure, or copying of this
>>> communication, or any part thereof, is strictly prohibited
>>> and may be unlawful. If you have received this e-mail in
>>> error, please notify us immediately by e-mail at
>>> abuse at c12g.com <mailto:abuse at c12g.com> and delete the e-mail
>>> and attachments and any copy from your system. C12G thanks
>>> you for your cooperation.
>>>
>>> On 9 September 2014 12:14, Luca Uburti <luburti at ricca-it.com
>>> <mailto:luburti at ricca-it.com>> wrote:
>>>
>>> Yes, even with an E1000 Nic card type set on the
>>> original image, once I import it into Opennebula it
>>> becomes a Flexible / AMD PCNET.
>>> I haven't tried installing this driver beforehand on the
>>> original image, even though I thought the vmware tools
>>> would take care of it.
>>>
>>> Thanks
>>> Luca
>>>
>>> Il 09/09/2014 11:01, Tino Vazquez ha scritto:
>>>> Hi Luca,
>>>>
>>>> Have you tried with E1000 model?
>>>>
>>>> Best,
>>>>
>>>> -Tino
>>>>
>>>>
>>>> --
>>>> OpenNebula - Flexible Enterprise Cloud Made Simple
>>>>
>>>> --
>>>> Constantino Vázquez Blanco, PhD, MSc
>>>> Senior Infrastructure Architect at C12G Labs
>>>> www.c12g.com <http://www.c12g.com> | @C12G |
>>>> es.linkedin.com/in/tinova
>>>> <http://es.linkedin.com/in/tinova>
>>>>
>>>> --
>>>> Confidentiality Warning: The information contained in
>>>> this e-mail and any accompanying documents, unless
>>>> otherwise expressly indicated, is confidential and
>>>> privileged, and is intended solely for the person
>>>> and/or entity to whom it is addressed (i.e. those
>>>> identified in the "To" and "cc" box). They are the
>>>> property of C12G Labs S.L.. Unauthorized distribution,
>>>> review, use, disclosure, or copying of this
>>>> communication, or any part thereof, is strictly
>>>> prohibited and may be unlawful. If you have received
>>>> this e-mail in error, please notify us immediately by
>>>> e-mail at abuse at c12g.com <mailto:abuse at c12g.com> and
>>>> delete the e-mail and attachments and any copy from
>>>> your system. C12G thanks you for your cooperation.
>>>>
>>>> 2014-09-09 9:13 GMT+02:00 Luca Uburti
>>>> <luburti at ricca-it.com <mailto:luburti at ricca-it.com>>:
>>>>
>>>> Hello
>>>>
>>>> I tried importing a preexisting Vmware
>>>> Windows2008r2 image into Opennebula, however I have
>>>> no network connectivity.
>>>> In device manager I see an unknown ethernet
>>>> controller with a yellow exclamation mark. The
>>>> hardware ID is
>>>> "pci/ven_1022&dev_2000&subsys_20001022&rev_10"
>>>> which looks like an AMD PCNET card. Inside the Esxi
>>>> host I see the network card is configured as Flexible.
>>>>
>>>> In the original image I tried to use both a
>>>> flexible and Vmxnet3 network card, but as soon as I
>>>> import it into Opennebula I always get this
>>>> old/incompatible network card.
>>>> I also tried reinstalling the latest Vmware tools
>>>> in the original image to no effect.
>>>>
>>>> Thank you for your help
>>>>
>>>> --
>>>> Dott. Luca Uburti
>>>> luburti at ricca-it.com <mailto:luburti at ricca-it.com>
>>>>
>>>> _________________
>>>> Ricca S.r.l.
>>>> ww <http://www.riccasrl.com>w.ricca-it.com
>>>> <https://webmail.ricca-it.it/www.riccasrl.com>
>>>>
>>>>
>>>>
>>>> Zona Industriale II Fase
>>>> 97100 - Ragusa
>>>>
>>>> T.+39 0932 66 80 82
>>>> <callto:+39%200932%2066%2080%2082>
>>>> F.+39 0932 66 70 72
>>>> <callto:+39%200932%2066%2070%2072>
>>>>
>>>>
>>>>
>>>>
>>>> AVVISO DI RISERVATEZZA
>>>> Questa e-mail è ad uso esclusivo di colui al
>>>> quale è indirizzata, e potrebbe contenere
>>>> informazioni riservate.
>>>> Se aveste ricevuto questa e-mail per errore, o
>>>> comunque non ne siete il destinatario, ci
>>>> scusiamo per l’accaduto e Vi invitiamo
>>>> cortesemente a darcene notizia e a distruggere
>>>> il messaggio ricevuto.
>>>> Vi ricordiamo che la diffusione, l’utilizzo e/o
>>>> la conservazione dei dati ricevuti per errore
>>>> costituiscono violazioni alle disposizioni del
>>>> Decreto legislativo n. 196/2003 denominato
>>>> “Codice in materia di protezione dei dati
>>>> personali”.
>>>>
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at lists.opennebula.org
>>>> <mailto:Users at lists.opennebula.org>
>>>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>>>
>>>>
>>>
>>>
>>
>>
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opennebula.org <mailto:Users at lists.opennebula.org>
> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20140910/c25856f1/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 5248 bytes
Desc: not available
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20140910/c25856f1/attachment-0001.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 29835 bytes
Desc: not available
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20140910/c25856f1/attachment-0001.png>
More information about the Users
mailing list