[one-users] OpenvSwitch intergration

[Shek Mohd Fahmi Abdul Latip]

Hi experts,

I'm integrating OpenvSwitch with Opennebula. The good news is, they work beautifully together :). Bad news is very less documentation available for OpenvSwitch. Then I have doubt on the new setup of OpenvSwitch. When I deploying VM through Opennebula, it created vnet as expected. Somehow the speed of it downgraded to 10MB-FD compare what I have on physical hardware, 1GB-FD. Could someone please advise me how to ensure that vnet speed same at physical network card? Here is my current configuration:

# ovs-vsctl show
8167368c-a8f8-41dd-beab-7984a3e63ddb
    Bridge "ovsbr0"
        Port "ovsbr0"
            Interface "ovsbr0"
                type: internal
        Port "vnet1"
            tag: 407
            Interface "vnet1"
        Port "ovsbond0"
            Interface "eth1"
            Interface "eth0"
        Port "vnet0"
            tag: 264
            Interface "vnet0"
    ovs_version: "1.10.0"

# ovs-appctl bond/show
---- ovsbond0 ----
bond_mode: active-backup
bond-hash-basis: 0
updelay: 0 ms
downdelay: 0 ms
lacp_status: negotiated

slave eth0: enabled
        may_enable: true

slave eth1: enabled
        active slave
        may_enable: true

# ovs-ofctl show ovsbr0
OFPT_FEATURES_REPLY (xid=0x2): dpid:0000e8393524b2b6
n_tables:254, n_buffers:256
capabilities: FLOW_STATS TABLE_STATS PORT_STATS QUEUE_STATS ARP_MATCH_IP
actions: OUTPUT SET_VLAN_VID SET_VLAN_PCP STRIP_VLAN SET_DL_SRC SET_DL_DST SET_NW_SRC SET_NW_DST SET_NW_TOS SET_TP_SRC SET_TP_DST ENQUEUE
 1(eth0): addr:e8:39:35:24:b2:b6
     config:     0
     state:      0
     current:    1GB-FD COPPER AUTO_NEG
     advertised: 10MB-HD 10MB-FD 100MB-HD 100MB-FD 1GB-FD AUTO_NEG
     supported:  10MB-HD 10MB-FD 100MB-HD 100MB-FD 1GB-FD COPPER AUTO_NEG
     speed: 1000 Mbps now, 1000 Mbps max
 2(eth1): addr:e8:39:xx:xx:xx:xx
     config:     0
     state:      0
     current:    1GB-FD COPPER AUTO_NEG
     advertised: 10MB-HD 10MB-FD 100MB-HD 100MB-FD 1GB-FD AUTO_NEG
     supported:  10MB-HD 10MB-FD 100MB-HD 100MB-FD 1GB-FD COPPER AUTO_NEG
     speed: 1000 Mbps now, 1000 Mbps max
 11(vnet0): addr:fe:00:xx:xx:xx:xx
     config:     0
     state:      0
     current:    10MB-FD COPPER
     speed: 10 Mbps now, 0 Mbps max
 12(vnet1): addr:fe:00:xx:xx:xx:xx
     config:     0
     state:      0
     current:    10MB-FD COPPER
     speed: 10 Mbps now, 0 Mbps max
 LOCAL(ovsbr0): addr:e8:39:xx:xx:xx:xx
     config:     0
     state:      0
     speed: 0 Mbps now, 0 Mbps max
OFPT_GET_CONFIG_REPLY (xid=0x4): frags=normal miss_send_len=0


Best regards,
.fahmie





------------------------------------------------------------------
-
-
DISCLAIMER: 

This e-mail (including any attachments) is for the addressee(s) 
only and may contain confidential information. If you are not the 
intended recipient, please note that any dealing, review, 
distribution, printing, copying or use of this e-mail is strictly 
prohibited. If you have received this email in error, please notify 
the sender  immediately and delete the original message. 
MIMOS Berhad is a research and development institution under 
the purview of the Malaysian Ministry of Science, Technology and 
Innovation. Opinions, conclusions and other information in this e-
mail that do not relate to the official business of MIMOS Berhad 
and/or its subsidiaries shall be understood as neither given nor 
endorsed by MIMOS Berhad and/or its subsidiaries and neither 
MIMOS Berhad nor its subsidiaries accepts responsibility for the 
same. All liability arising from or in connection with computer 
viruses and/or corrupted e-mails is excluded to the fullest extent 
permitted by law.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20130926/254f588d/attachment-0001.htm>