[one-users] Error: Domain 'one-22' does not exist.

[Documented Facts]

yes, it's there. are there any problem using .img files with LVM.
I have installed Ubuntu according to this method
https://help.ubuntu.com/community/Xen#During_installation_of_Ubuntu so Dom
0 is in the LVM.

Please reply me every possible way to resolve this it's very helpful.


On Mon, Oct 21, 2013 at 6:52 PM, Javier Fontan <jfontan at opennebula.org>wrote:

> Can you check that the pygrub executable is at /usr/bin/pygrub in the
> nodes where you are trying to start the VMs?
>
> On Mon, Oct 21, 2013 at 7:29 AM, Documented Facts
> <documentedfacts at gmail.com> wrote:
> > hi
> >
> > Sorry since I' m late to reply.
> >
> > I have attached oned.conf, vmm_exec_xen3.conf, xenrc to this email.
> >
> > Network bridge xenbr0 exist. I have put the output of brctl show command
> >
> > bridge name bridge id STP enabled interfaces
> > virbr0 8000.feffffffffff yes vif1.0
> > xenbr0 8000.0021856e8e4a no eth0
> >
> > also I have changed the template to make it similar to xen config file of
> > this. New template is given bellow
> >
> > TEMPLATE 6 INFORMATION
> > ID             : 6
> > NAME           : UbuntuParaV64
> > USER           : oneadmin
> > GROUP          : oneadmin
> > REGISTER TIME  : 10/04 10:33:23
> >
> > PERMISSIONS
> > OWNER          : um-
> > GROUP          : ---
> > OTHER          : ---
> >
> > TEMPLATE CONTENTS
> > CONTEXT=[
> >   NETWORK="YES",
> >   SSH_PUBLIC_KEY="$USER[SSH_PUBLIC_KEY]" ]
> > CPU="0.5"
> > DISK=[
> >   DEV_PREFIX="xvd",
> >   DRIVER="file",
> >   IMAGE_ID="7",
> >   READONLY="no" ]
> > GRAPHICS=[
> >   LISTEN="0.0.0.0",
> >   TYPE="VNC" ]
> > MEMORY="512"
> > NIC=[
> >   NETWORK_ID="0" ]
> > OS=[
> >   ARCH="x86_64",
> >   BOOT="hd",
> >   BOOTLOADER="/usr/bin/pygrub",
> >   GUESTOS="ubuntu64Guest",
> >   ROOT="xvda" ]
> > REQUIREMENTS="ID=\"0\""
> >
> > it produce the deployment.0 file with content
> >
> > name = 'one-29'
> > #O CPU_CREDITS = 128
> > memory  = '512'
> > bootloader = "/usr/bin/pygrub"
> > disk = [
> >     'file:/var/lib/one//datastores/0/29/disk.0,xvda,w',
> >     'file:/var/lib/one//datastores/0/29/disk.1,xvdb,r',
> > ]
> > vif = [
> >     ' mac=02:00:0a:16:81:a3,ip=10.22.129.163,bridge=xenbr0',
> > ]
> > vfb = ['type=vnc,vnclisten=0.0.0.0,vncdisplay=29']
> >
> >
> > On Thu, Oct 17, 2013 at 10:40 PM, Javier Fontan <jfontan at opennebula.org>
> > wrote:
> >>
> >> Can you send us the conf file of a Xen VM you can run? Does xenbr0
> exist?
> >>
> >> On Mon, Oct 7, 2013 at 8:38 AM, Documented Facts
> >> <documentedfacts at gmail.com> wrote:
> >> > Hi
> >> >
> >> > I have installed XEN according to below URL
> >> >
> >> > https://help.ubuntu.com/community/Xen#During_installation_of_Ubuntu
> >> >
> >> > it can run a VM itself.
> >> >
> >> > then I created a Image according this URL
> >> >
> >> > http://opennebula.org/documentation:ubuntu12-xen
> >> >
> >> > and it works on the host.
> >> >
> >> > But when I used extracted ubuntu image of that through the Opennebula
> I
> >> > got
> >> > the below error message
> >> >
> >> > Mon Oct 7 10:19:51 2013 [VMM][I]: Command execution fail: cat << EOT |
> >> > /var/tmp/one/vmm/xen3/deploy
> >> > '/var/lib/one//datastores/0/22/deployment.0'
> >> > 'node01' 22 node01
> >> > Mon Oct 7 10:19:51 2013 [VMM][I]: Error: Domain 'one-22' does not
> exist.
> >> > Mon Oct 7 10:19:51 2013 [VMM][E]: Unable
> >> > Mon Oct 7 10:19:51 2013 [VMM][I]: ExitCode: 3
> >> > Mon Oct 7 10:19:51 2013 [VMM][I]: Failed to execute virtualization
> >> > driver
> >> > operation: deploy.
> >> > Mon Oct 7 10:19:51 2013 [VMM][E]: Error deploying virtual machine:
> >> > Unable
> >> > Mon Oct 7 10:19:51 2013 [DiM][I]: New VM state is FAILED
> >> >
> >> > My Virtual Machine template is given below and it was created through
> >> > sun
> >> > stone
> >> >
> >> > TEMPLATE CONTENTS
> >> > CONTEXT=[
> >> >   NETWORK="YES",
> >> >   SSH_PUBLIC_KEY="$USER[SSH_PUBLIC_KEY]" ]
> >> > CPU="0.5"
> >> > DISK=[
> >> >   IMAGE_ID="7" ]
> >> > GRAPHICS=[
> >> >   LISTEN="0.0.0.0",
> >> >   TYPE="VNC" ]
> >> > MEMORY="512"
> >> > NIC=[
> >> >   NETWORK_ID="0" ]
> >> > OS=[
> >> >   ARCH="x86_64",
> >> >   BOOT="hd",
> >> >   BOOTLOADER="pygrub",
> >> >   GUESTOS="ubuntu64Guest" ]
> >> > REQUIREMENTS="ID=\"0\""
> >> >
> >> > and the deployment.0 file content is
> >> >
> >> > name = 'one-22'
> >> > #O CPU_CREDITS = 128
> >> > memory  = '512'
> >> > bootloader = "pygrub"
> >> > disk = [
> >> >     'file:/var/lib/one//datastores/0/22/disk.0,hda,w',
> >> >     'file:/var/lib/one//datastores/0/22/disk.1,hdb,r',
> >> > ]
> >> > vif = [
> >> >     ' mac=02:00:0a:16:81:a3,ip=10.22.129.163,bridge=xenbr0',
> >> > ]
> >> > vfb = ['type=vnc,vnclisten=0.0.0.0,vncdisplay=22']
> >> >
> >> > System data store and default data store have configured to use SSH.
> >> >
> >> > I m very new to open nebula. Can anybody please help me to find
> solution
> >> > to
> >> > this problem ?
> >> >
> >> > My intention is to configure open nebula to use a PHP CMS hosting on a
> >> > XEN
> >> > para virtualized guests because Machines doesn't have Hardware
> support.
> >> > Can
> >> > you please let me know how to do it too ?
> >> >
> >> > Thank you
> >> >
> >> >
> >> > _______________________________________________
> >> > Users mailing list
> >> > Users at lists.opennebula.org
> >> > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
> >> >
> >>
> >>
> >>
> >> --
> >> Javier Fontán Muiños
> >> Developer
> >> OpenNebula - The Open Source Toolkit for Data Center Virtualization
> >> www.OpenNebula.org | @OpenNebula | github.com/jfontan
> >
> >
>
>
>
> --
> Javier Fontán Muiños
> Developer
> OpenNebula - The Open Source Toolkit for Data Center Virtualization
> www.OpenNebula.org | @OpenNebula | github.com/jfontan
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20131021/79cca707/attachment-0002.htm>