[one-users] problem deploy Centos 6.2 OpenNebula 3.8.3

Tino Vazquez tinova at opennebula.org
Mon May 13 02:34:24 PDT 2013


Hi,

The only difference that I see is the use of SCSI instead of IDE. does
it work if you change the DEV_PREFIX of the CentOS disk to 'hd' ?

Regards,

-Tino
--
Join us at OpenNebulaConf2013 in Berlin, 24-26 September, 2013 |
www.opennebulaconf.com

--
Constantino Vázquez Blanco, PhD, MSc
Project Engineer | OpenNebula - The Open-Source Solution for Data
Center Virtualization
www.OpenNebula.org | @tinova79 | @OpenNebula


On Thu, May 9, 2013 at 5:48 PM,  <ahernandez at tesla.cujae.edu.cu> wrote:
> My problem is that forget that the OS disk is sd, and I write in the image
> hd. I fix this, I create a new image, but I obtain other problem with
> deployment.0. When I try up VM, in oned.log I see this:
>
> Wed May  1 20:27:01 2013 [VMM][D]: Message received: LOG I 49 Command
> execution fail: /var/lib/one/remotes/vmm/vmware/deploy
> /var/lib/one/vms/49/deployment.0 das-vsilo23.cimex.com.cu 49
> das-vsilo23.cimex.com.cu
>
> Wed May  1 20:27:01 2013 [VMM][D]: Message received: LOG E 49 deploy: Error
> executing: virsh -c
> 'esx://das-vsilo23.cimex.com.cu/?no_verify=1&auto_answer=1' define
> /var/lib/one/vms/49/deployment.0 err: ExitCode: 1
>
> Wed May  1 20:27:01 2013 [VMM][D]: Message received: LOG I 49 out:
>
> Wed May  1 20:27:01 2013 [VMM][D]: Message received: LOG I 49 error: Failed
> to define domain from /var/lib/one/vms/49/deployment.0
>
> Wed May  1 20:27:01 2013 [VMM][D]: Message received: LOG I 49 error:
> internal error Unknown driver name 'file'
>
> Wed May  1 20:27:01 2013 [VMM][D]: Message received: LOG I 49
>
> Wed May  1 20:27:01 2013 [VMM][D]: Message received: LOG I 49 ExitCode: 255
>
> Wed May  1 20:27:01 2013 [VMM][D]: Message received: LOG I 49 Failed to
> execute virtualization driver operation: deploy.
>
> Wed May  1 20:27:01 2013 [VMM][D]: Message received: DEPLOY FAILURE 49
>
> FOR CHECH THE PROBLEM I DOWNLOAD ttylinux - VMware. I CREATE A NEW IMAGE
> WITH THIS, AND WITH THIS IMAGE I CAN RUNING THE VM.
>
> I SEE THE 2 deployment.0, for analyzing the problem, but I don't see the
> problem
>
> I seend the two deployment.0
>
> This is the deployment.0 of Centos 6.2:
> <domain type='vmware'>
>         <name>one-49</name>
>         <vcpu>2</vcpu>
>         <memory>1048576</memory>
>         <os>
>                 <type arch='x86_64'>hvm</type>
>         </os>
>         <devices>
>                 <disk type='file' device='disk'>
>                         <source file='[0] 49/disk.0/disk.vmdk'/>
>                         <target dev='sda'/>
>                         <driver name='file'/>
>                 </disk>
>                 <disk type='file' device='disk'>
>                         <source file='[0] 49/disk.1/disk.vmdk'/>
>                         <target dev='hda'/>
>                         <driver name='file'/>
>                 </disk>
>                 <interface type='bridge'>
>                         <source bridge='one-pg-2'/>
>                         <mac address='02:00:ac:16:1e:c1'/>
>                 </interface>
>                 <graphics type='vnc' listen='0.0.0.0' port='5901'/>
>         </devices>
>
> </domain>
>
>
> This is the deployment.0 of ttylinux
>
> <domain type='vmware'>
>         <name>one-50</name>
>         <vcpu>1</vcpu>
>         <memory>1048576</memory>
>         <os>
>                 <type arch='i686'>hvm</type>
>         </os>
>         <devices>
>                 <disk type='file' device='disk'>
>                         <source file='[0] 50/disk.0/disk.vmdk'/>
>                         <target dev='hda'/>
>                         <driver name='file'/>
>                 </disk>
>                 <disk type='file' device='disk'>
>                         <source file='[0] 50/disk.1/disk.vmdk'/>
>                         <target dev='hdb'/>
>                         <driver name='file'/>
>                 </disk>
>                 <interface type='bridge'>
>                         <source bridge='one-pg-2'/>
>                         <mac address='02:00:ac:16:1e:c2'/>
>                 </interface>
>                 <graphics type='vnc' listen='0.0.0.0' port='5901'/>
>         </devices>
>
> </domain>
>
>
> Any Ideas?
>
>
>
>
> El 2013-05-09 05:39, Tino Vazquez escribió:
>>
>> Hi,
>>
>>
>> What datastore configuration are you using? ('onedatastore list')
>>
>> Regards,
>>
>> -Tino
>> --
>> Join us at OpenNebulaConf2013 in Berlin, 24-26 September, 2013
>>
>> --
>> Constantino Vázquez Blanco, PhD, MSc
>> Project Engineer | OpenNebula - The Open-Source Solution for Data
>> Center Virtualization
>> Join us at OpenNebulaConf2013 in Berlin from the 24th to the 26th of
>> September 2013!
>> www.OpenNebula.org | @tinova79 | @OpenNebula
>>
>>
>> On Wed, May 8, 2013 at 11:21 PM,  <ahernandez at tesla.cujae.edu.cu> wrote:
>>>
>>> I used OpenNebula 3.8.3 and ESXi Hypervisor, and create image using
>>> Centos
>>> 6.2 obtain of marketplace. I create the image, I create the template, but
>>> when I try the instantiate a VM, I don't deploy de VM
>>>
>>> this is the oned.log:
>>>
>>> Wed May  1 03:55:04 2013 [VMM][D]: Message received: LOG I 47 Command
>>> execution fail: /var/lib/one/remotes/vmm/vmware/deploy
>>> /var/lib/one/vms/47/deployment.0 das-vsilo23.cimex.com.cu 47
>>> das-vsilo23.cimex.com.cu
>>>
>>> Wed May  1 03:55:04 2013 [VMM][D]: Message received: LOG D 47 deploy:
>>> Successfully defined domain one-47.
>>>
>>> Wed May  1 03:55:04 2013 [VMM][D]: Message received: LOG E 47 deploy:
>>> Error
>>> executing: virsh -c 'esx://das-esxi.com.cu/?no_verify=1&auto_answer=1'
>>> start
>>> one-47 err: ExitCode: 1
>>>
>>> Wed May  1 03:55:04 2013 [VMM][D]: Message received: LOG I 47 out:
>>>
>>> Wed May  1 03:55:04 2013 [VMM][D]: Message received: LOG I 47 error:
>>> Failed
>>> to start domain one-47
>>>
>>> Wed May  1 03:55:04 2013 [VMM][D]: Message received: LOG I 47 error:
>>> internal error Could not start domain: GenericVmConfigFault - Reason: Is
>>> a
>>> directory.
>>>
>>> Wed May  1 03:55:04 2013 [VMM][D]: Message received: LOG I 47
>>>
>>> Wed May  1 03:55:04 2013 [VMM][D]: Message received: LOG I 47 ExitCode: 1
>>>
>>> Wed May  1 03:55:04 2013 [VMM][D]: Message received: LOG I 47 Failed to
>>> execute virtualization driver operation: deploy.
>>>
>>> Wed May  1 03:55:04 2013 [VMM][D]: Message received: DEPLOY FAILURE 47 -
>>>
>>>
>>>
>>> 48 Aniversario de la Cujae, Una obra de la Revolucion Cubana | 2 de
>>> diciembre de 1964 | http://cujae.edu.cu
>>>
>>> Consulte la enciclopedia colaborativa cubana. http://www.ecured.cu
>>> _______________________________________________
>>> Users mailing list
>>> Users at lists.opennebula.org
>>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>
>
>
>
> 48 Aniversario de la Cujae, Una obra de la Revolucion Cubana | 2 de
> diciembre de 1964 | http://cujae.edu.cu
>
> Consulte la enciclopedia colaborativa cubana. http://www.ecured.cu



More information about the Users mailing list