[one-users] basic hardware configuration for properly install and run Sandboxes
A B M MONIRUZZAMAN
abm.mzkhan at gmail.com
Sat Mar 23 12:42:35 PDT 2013
Dear
Project Engineers,
I need to know the basic hardware configuration for best suite to properly
install and run Sandboxes that have to submit proposal to my university to
ready this PC/workstation for me for this installation.
I also suggest you to keep information at OpenNebula site - about basic
hardware configuration need to install different packages of Opennebula.
Please response this message early.
Regards
Moniruzzaman
On Thu, Mar 21, 2013 at 8:55 PM, Carlos Martín Sánchez <
cmartin at opennebula.org> wrote:
> Since the the sandbox is just a quick demo environment, use whatever is
> easier for you. If you don't have any of the platforms already configured,
> I'd go with virtualbox.
>
> PS: When replying, please edit your Subject line so it is more specific
>
> than "Re: Contents of Users digest..."
> --
> Carlos Martín, MSc
> Project Engineer
> OpenNebula - The Open-source Solution for Data Center Virtualization
> www.OpenNebula.org | cmartin at opennebula.org | @OpenNebula<http://twitter.com/opennebula><cmartin at opennebula.org>
>
>
> On Thu, Mar 21, 2013 at 9:40 AM, A B M MONIRUZZAMAN <abm.mzkhan at gmail.com>wrote:
>
>> Dear
>> Project engineers
>>
>> Could you please tell me basic configurations of PC/Laptop for best suite
>> for implementing OpenNebula Sandboxs with ESX, KVM, VirtualBox and othes
>> hypervisors.
>>
>> Need your early response to set up machine(PC/Laptop) ready for
>> implementing OpenNebula Sandboxs.
>>
>> Thanking you
>>
>> A B M Moniruzzaman
>>
>>
>> On Wed, Mar 20, 2013 at 8:26 PM, <users-request at lists.opennebula.org>wrote:
>>
>>> Send Users mailing list submissions to
>>> users at lists.opennebula.org
>>>
>>> To subscribe or unsubscribe via the World Wide Web, visit
>>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>> or, via email, send a message with subject or body 'help' to
>>> users-request at lists.opennebula.org
>>>
>>> You can reach the person managing the list at
>>> users-owner at lists.opennebula.org
>>>
>>> When replying, please edit your Subject line so it is more specific
>>> than "Re: Contents of Users digest..."
>>>
>>>
>>> Today's Topics:
>>>
>>> 1. Re: Users Digest, Vol 61, Issue 50 (Tino Vazquez)
>>>
>>>
>>> ----------------------------------------------------------------------
>>>
>>> Message: 1
>>> Date: Wed, 20 Mar 2013 15:26:10 +0100
>>> From: Tino Vazquez <tinova at opennebula.org>
>>> To: A B M MONIRUZZAMAN <abm.mzkhan at gmail.com>
>>> Cc: users <users at lists.opennebula.org>
>>> Subject: Re: [one-users] Users Digest, Vol 61, Issue 50
>>> Message-ID:
>>> <CAHfKwc1meU7767GqyJp-T=
>>> jXTkST36r_U7wFkJ0yxJMWPLS_rg at mail.gmail.com>
>>> Content-Type: text/plain; charset=windows-1252
>>>
>>> Hi,
>>>
>>> Indeed, nested virtualization i think is out of the question with your
>>> hardware. I would suggest trying the VirtualBox appliance
>>> ()http://opennebula.org/cloud:sandboxvirtualbox, much lighter than the
>>> nested ESX within Workstation, and compatible with your set up. Let me
>>> know if you have any problem with this.
>>>
>>> Regards,
>>>
>>> -Tino
>>>
>>> PS: Please, respond to the list as well, I may skip the mail but
>>> others can reply to your questions.
>>>
>>> --
>>> Constantino V?zquez Blanco, PhD, MSc
>>> Project Engineer
>>> OpenNebula - The Open-Source Solution for Data Center Virtualization
>>> www.OpenNebula.org | @tinova79 | @OpenNebula
>>>
>>>
>>> On Wed, Mar 20, 2013 at 2:46 PM, A B M MONIRUZZAMAN
>>> <abm.mzkhan at gmail.com> wrote:
>>> > Dear
>>> > Thank your for response.
>>> > I am giving you my laptop's basic info. you may find any clue for not
>>> > properly install.
>>> >
>>> > Did I not install packages according to
>>> > http://opennebula.org/cloud:sandboxesx ?
>>> > Should I go for another solution? like Sandbox with Virtualbox or KVM
>>> ? with
>>> > my laptop.
>>> > I have another laptop acer with celeron processor and 2 GB ram, how do
>>> I use
>>> > it for implementing OpenNebula Sandbox ?
>>> >
>>> > Best
>>> >
>>> > A B M Moniruzzaman
>>> >
>>> >
>>> > On Wed, Mar 20, 2013 at 7:20 PM, Tino Vazquez <tinova at opennebula.org>
>>> wrote:
>>> >>
>>> >> Hi,
>>> >>
>>> >> The problem that I mainly see is with screenshot 2.jpg. It is stated
>>> >> there that your laptop doesn't have VT extension in the CPI, so it
>>> >> cannot do nested virtualization. That may be why you cannot properly
>>> >> access the sandbox, since you are running an ESX inside the
>>> >> Workstation, and then the sandbox inside the ESX (nested
>>> >> virtualization).
>>> >>
>>> >
>>> >
>>> >>
>>> >> I would suggest trying to create a new VM in the ESX with a blank disk
>>> >> and see if that boots (even if it is to say that there is no Operating
>>> >> System). If it doesn't, then there is zero chance to get the ESX
>>> >> sandbox working in your setup (you will need at least one more
>>> >> computer).
>>> >>
>>> >> Hope it helps,
>>> >>
>>> >> -Tino
>>> >>
>>> >> --
>>> >> Constantino V?zquez Blanco, PhD, MSc
>>> >> Project Engineer
>>> >> OpenNebula - The Open-Source Solution for Data Center Virtualization
>>> >> www.OpenNebula.org | @tinova79 | @OpenNebula
>>> >>
>>> >>
>>> >> On Wed, Mar 20, 2013 at 2:10 PM, A B M MONIRUZZAMAN
>>> >> <abm.mzkhan at gmail.com> wrote:
>>> >> > Dear
>>> >> >
>>> >> > Please what should I do now ,suggest me.
>>> >> >
>>> >> > I have a presentation Saturday 23 March 2013, and I have to show
>>> >> > OpenNebula
>>> >> > 3.8 ESX Sandbox.
>>> >> >
>>> >> > What I need to show - a prototype of private cloud and access to the
>>> >> > cloud
>>> >> > and use a application in cloud.
>>> >> >
>>> >> > Please give me idea - what packages should I configure within
>>> OpenNebula
>>> >> > site.
>>> >> >
>>> >> > Our university,( Daffodil international University web:
>>> >> > http://www.daffodilvarsity.edu.bd/ ) are just now being
>>> experiencing
>>> >> > with
>>> >> > OpenNebula. They are planning to implement a cloud platforms and
>>> >> > complete
>>> >> > university into the cloud.
>>> >> >
>>> >> > Please early reply to me.
>>> >> >
>>> >> > Best
>>> >> >
>>> >> > A B M Moniruzzaman
>>> >> >
>>> >> >
>>> >> > ---------- Forwarded message ----------
>>> >> > From: A B M MONIRUZZAMAN <abm.mzkhan at gmail.com>
>>> >> > Date: Tue, Mar 19, 2013 at 5:39 PM
>>> >> > Subject: Re: [one-users] Users Digest, Vol 61, Issue 50
>>> >> > To: Tino Vazquez <tinova at opennebula.org>
>>> >> > Cc: A B M Moniruzzaman <mzkhan.2000 at gmail.com>
>>> >> >
>>> >> >
>>> >> > Dear
>>> >> > Thank you for response.
>>> >> >
>>> >> > I successfully have done 1. , 2. , 3. , up to 3.3 according to the
>>> page
>>> >> > http://opennebula.org/cloud:sandboxesx
>>> >> > And its ok.
>>> >> > I am giving you all screen shots by sequence to start the Appliance
>>> that
>>> >> > you
>>> >> > will clearly get idea.
>>> >> >
>>> >> > My laptop is windows 7 with 32 bit; any problem for that?
>>> >> >
>>> >> > Please response this email asap so that I can present to my teacher.
>>> >> >
>>> >> > Regards
>>> >> > Monir
>>> >> >
>>> >> >
>>> >> > On Tue, Mar 19, 2013 at 4:39 PM, Tino Vazquez <
>>> tinova at opennebula.org>
>>> >> > wrote:
>>> >> >>
>>> >> >> Hi,
>>> >> >>
>>> >> >> I would suggest installing the appliance onto an ESX hypervisor,
>>> not
>>> >> >> Workstation.
>>> >> >>
>>> >> >> In any case, please do send the screenshots, they don't seem to be
>>> >> >> attached in your original mail.
>>> >> >>
>>> >> >> Best regards,
>>> >> >>
>>> >> >> -Tino
>>> >> >> --
>>> >> >> Constantino V?zquez Blanco, PhD, MSc
>>> >> >> Project Engineer
>>> >> >> OpenNebula - The Open-Source Solution for Data Center
>>> Virtualization
>>> >> >> www.OpenNebula.org | @tinova79 | @OpenNebula
>>> >> >>
>>> >> >>
>>> >> >> On Sat, Mar 16, 2013 at 8:30 PM, A B M MONIRUZZAMAN
>>> >> >> <abm.mzkhan at gmail.com> wrote:
>>> >> >> > Hi all
>>> >> >> >
>>> >> >> > I am writing to you because I need a little help to successfully
>>> >> >> > implement
>>> >> >> > according to http://opennebula.org/cloud:sandboxesx
>>> >> >> >
>>> >> >> > What I try to do:
>>> >> >> > Implement a open-source private cloud platforms for prototype
>>> testing
>>> >> >> > for
>>> >> >> > educational cloud project.
>>> >> >> >
>>> >> >> > I use this page http://opennebula.org/cloud:tryout , and try
>>> >> >> > according
>>> >> >> > to
>>> >> >> > the page : http://opennebula.org/cloud:sandboxesx
>>> >> >> >
>>> >> >> > What I did:
>>> >> >> > 1. Download and install VMware Workstation 9.0
>>> >> >> > 2. Download OpenNebula 3.8 ESX from the marketplace and use
>>> IZArc
>>> >> >> > for
>>> >> >> > opennebula-3.8-sandbox-vmdk.
>>> >> >> > 3. Upload Sandbox image ESX 5.0.0 to VMware workstation.
>>> >> >> > 4. Download and install VMware vSphere Client use
>>> >> >> > VMware-viclient-all-5.0.0-623373.exe for setup.
>>> >> >> >
>>> >> >> > I successfully have done 1. , 2. , 3. , up to 3.3 according to
>>> the
>>> >> >> > page
>>> >> >> > http://opennebula.org/cloud:sandboxesx
>>> >> >> > But I faced problem at this point the Virtual Machine will be
>>> running
>>> >> >> > ?
>>> >> >> > no
>>> >> >> > login prompt in the VI client console appears
>>> >> >> > I attached few snap shots for better understanding for you of my
>>> >> >> > current
>>> >> >> > state.
>>> >> >> >
>>> >> >> > Please help me to complete implementation this.
>>> >> >> >
>>> >> >> >
>>> >> >> > On Sun, Mar 17, 2013 at 1:07 AM, <
>>> users-request at lists.opennebula.org>
>>> >> >> > wrote:
>>> >> >> >>
>>> >> >> >> Send Users mailing list submissions to
>>> >> >> >> users at lists.opennebula.org
>>> >> >> >>
>>> >> >> >> To subscribe or unsubscribe via the World Wide Web, visit
>>> >> >> >>
>>> >> >> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>> >> >> >> or, via email, send a message with subject or body 'help' to
>>> >> >> >> users-request at lists.opennebula.org
>>> >> >> >>
>>> >> >> >> You can reach the person managing the list at
>>> >> >> >> users-owner at lists.opennebula.org
>>> >> >> >>
>>> >> >> >> When replying, please edit your Subject line so it is more
>>> specific
>>> >> >> >> than "Re: Contents of Users digest..."
>>> >> >> >>
>>> >> >> >>
>>> >> >> >> Today's Topics:
>>> >> >> >>
>>> >> >> >> 1. Chef cookbook for OpenNebula (to be used with Vagrant)
>>> >> >> >> (Giovanni Toraldo)
>>> >> >> >>
>>> >> >> >>
>>> >> >> >>
>>> >> >> >>
>>> ----------------------------------------------------------------------
>>> >> >> >>
>>> >> >> >> Message: 1
>>> >> >> >> Date: Sat, 16 Mar 2013 16:13:52 +0100
>>> >> >> >> From: Giovanni Toraldo <me at gionn.net>
>>> >> >> >> To: Users OpenNebula <users at lists.opennebula.org>
>>> >> >> >> Subject: [one-users] Chef cookbook for OpenNebula (to be used
>>> with
>>> >> >> >> Vagrant)
>>> >> >> >> Message-ID:
>>> >> >> >>
>>> >> >> >> <CAAy5=
>>> 2fXPVjPcRaa0MK8HN-_Rx+583GWmQrF0wmYz0UFYCqaxw at mail.gmail.com>
>>> >> >> >> Content-Type: text/plain; charset=UTF-8
>>> >> >> >>
>>> >> >> >> Hi!
>>> >> >> >>
>>> >> >> >> Recently I was interested in using Vagrant plus some Chef
>>> recipes to
>>> >> >> >> easily bootstrap a development machine containing OpenNebula.
>>> >> >> >>
>>> >> >> >> I've published a very basic cookbook that will install build
>>> >> >> >> dependencies and opennebula from sources, served by Vagrant
>>> (tested
>>> >> >> >> under Ubuntu 12.04)
>>> >> >> >>
>>> >> >> >> The GitHub repository of the cookbook:
>>> >> >> >> https://github.com/gionn/chef-opennebula
>>> >> >> >>
>>> >> >> >> If you want to take a look to my Vagrantfile, it's here (along
>>> with
>>> >> >> >> the latest OpenNebula sources):
>>> >> >> >> https://github.com/liberologico/one/blob/vagrant/Vagrantfile
>>> >> >> >>
>>> >> >> >> If someone is interested in expanding this cookbook, pull
>>> requests
>>> >> >> >> are
>>> >> >> >> warmly welcomed (even for fixing crap I put into it)
>>> >> >> >>
>>> >> >> >> Cheers,
>>> >> >> >> --
>>> >> >> >> Giovanni Toraldo
>>> >> >> >> http://gionn.net
>>> >> >> >>
>>> >> >> >>
>>> >> >> >> ------------------------------
>>> >> >> >>
>>> >> >> >> _______________________________________________
>>> >> >> >> Users mailing list
>>> >> >> >> Users at lists.opennebula.org
>>> >> >> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>> >> >> >>
>>> >> >> >>
>>> >> >> >> End of Users Digest, Vol 61, Issue 50
>>> >> >> >> *************************************
>>> >> >> >
>>> >> >> >
>>> >> >> >
>>> >> >> > _______________________________________________
>>> >> >> > Users mailing list
>>> >> >> > Users at lists.opennebula.org
>>> >> >> > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>> >> >> >
>>> >> >
>>> >> >
>>> >> >
>>> >>
>>> >> --
>>> >> Constantino V?zquez Blanco, PhD, MSc | dsa-research.org/tinova
>>> >> Virtualization Technology Engineer / Researcher
>>> >> OpenNebula - The Open-Source Solution for Data Center Virtualization
>>> >> www.OpenNebula.org | @tinova79 | @OpenNebula
>>> >>
>>> >>
>>> >> On Wed, Mar 20, 2013 at 2:10 PM, A B M MONIRUZZAMAN
>>> >> <abm.mzkhan at gmail.com> wrote:
>>> >> > Dear
>>> >> >
>>> >> > Please what should I do now ,suggest me.
>>> >> >
>>> >> > I have a presentation Saturday 23 March 2013, and I have to show
>>> >> > OpenNebula
>>> >> > 3.8 ESX Sandbox.
>>> >> >
>>> >> > What I need to show - a prototype of private cloud and access to the
>>> >> > cloud
>>> >> > and use a application in cloud.
>>> >> >
>>> >> > Please give me idea - what packages should I configure within
>>> OpenNebula
>>> >> > site.
>>> >> >
>>> >> > Our university,( Daffodil international University web:
>>> >> > http://www.daffodilvarsity.edu.bd/ ) are just now being
>>> experiencing
>>> >> > with
>>> >> > OpenNebula. They are planning to implement a cloud platforms and
>>> >> > complete
>>> >> > university into the cloud.
>>> >> >
>>> >> > Please early reply to me.
>>> >> >
>>> >> > Best
>>> >> >
>>> >> > A B M Moniruzzaman
>>> >> >
>>> >> >
>>> >> > ---------- Forwarded message ----------
>>> >> > From: A B M MONIRUZZAMAN <abm.mzkhan at gmail.com>
>>> >> > Date: Tue, Mar 19, 2013 at 5:39 PM
>>> >> > Subject: Re: [one-users] Users Digest, Vol 61, Issue 50
>>> >> > To: Tino Vazquez <tinova at opennebula.org>
>>> >> > Cc: A B M Moniruzzaman <mzkhan.2000 at gmail.com>
>>> >> >
>>> >> >
>>> >> > Dear
>>> >> > Thank you for response.
>>> >> >
>>> >> > I successfully have done 1. , 2. , 3. , up to 3.3 according to the
>>> page
>>> >> > http://opennebula.org/cloud:sandboxesx
>>> >> > And its ok.
>>> >> > I am giving you all screen shots by sequence to start the Appliance
>>> that
>>> >> > you
>>> >> > will clearly get idea.
>>> >> >
>>> >> > My laptop is windows 7 with 32 bit; any problem for that?
>>> >> >
>>> >> > Please response this email asap so that I can present to my teacher.
>>> >> >
>>> >> > Regards
>>> >> > Monir
>>> >> >
>>> >> >
>>> >> > On Tue, Mar 19, 2013 at 4:39 PM, Tino Vazquez <
>>> tinova at opennebula.org>
>>> >> > wrote:
>>> >> >>
>>> >> >> Hi,
>>> >> >>
>>> >> >> I would suggest installing the appliance onto an ESX hypervisor,
>>> not
>>> >> >> Workstation.
>>> >> >>
>>> >> >> In any case, please do send the screenshots, they don't seem to be
>>> >> >> attached in your original mail.
>>> >> >>
>>> >> >> Best regards,
>>> >> >>
>>> >> >> -Tino
>>> >> >> --
>>> >> >> Constantino V?zquez Blanco, PhD, MSc
>>> >> >> Project Engineer
>>> >> >> OpenNebula - The Open-Source Solution for Data Center
>>> Virtualization
>>> >> >> www.OpenNebula.org | @tinova79 | @OpenNebula
>>> >> >>
>>> >> >>
>>> >> >> On Sat, Mar 16, 2013 at 8:30 PM, A B M MONIRUZZAMAN
>>> >> >> <abm.mzkhan at gmail.com> wrote:
>>> >> >> > Hi all
>>> >> >> >
>>> >> >> > I am writing to you because I need a little help to successfully
>>> >> >> > implement
>>> >> >> > according to http://opennebula.org/cloud:sandboxesx
>>> >> >> >
>>> >> >> > What I try to do:
>>> >> >> > Implement a open-source private cloud platforms for prototype
>>> testing
>>> >> >> > for
>>> >> >> > educational cloud project.
>>> >> >> >
>>> >> >> > I use this page http://opennebula.org/cloud:tryout , and try
>>> >> >> > according
>>> >> >> > to
>>> >> >> > the page : http://opennebula.org/cloud:sandboxesx
>>> >> >> >
>>> >> >> > What I did:
>>> >> >> > 1. Download and install VMware Workstation 9.0
>>> >> >> > 2. Download OpenNebula 3.8 ESX from the marketplace and use
>>> IZArc
>>> >> >> > for
>>> >> >> > opennebula-3.8-sandbox-vmdk.
>>> >> >> > 3. Upload Sandbox image ESX 5.0.0 to VMware workstation.
>>> >> >> > 4. Download and install VMware vSphere Client use
>>> >> >> > VMware-viclient-all-5.0.0-623373.exe for setup.
>>> >> >> >
>>> >> >> > I successfully have done 1. , 2. , 3. , up to 3.3 according to
>>> the
>>> >> >> > page
>>> >> >> > http://opennebula.org/cloud:sandboxesx
>>> >> >> > But I faced problem at this point the Virtual Machine will be
>>> running
>>> >> >> > ?
>>> >> >> > no
>>> >> >> > login prompt in the VI client console appears
>>> >> >> > I attached few snap shots for better understanding for you of my
>>> >> >> > current
>>> >> >> > state.
>>> >> >> >
>>> >> >> > Please help me to complete implementation this.
>>> >> >> >
>>> >> >> >
>>> >> >> > On Sun, Mar 17, 2013 at 1:07 AM, <
>>> users-request at lists.opennebula.org>
>>> >> >> > wrote:
>>> >> >> >>
>>> >> >> >> Send Users mailing list submissions to
>>> >> >> >> users at lists.opennebula.org
>>> >> >> >>
>>> >> >> >> To subscribe or unsubscribe via the World Wide Web, visit
>>> >> >> >>
>>> >> >> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>> >> >> >> or, via email, send a message with subject or body 'help' to
>>> >> >> >> users-request at lists.opennebula.org
>>> >> >> >>
>>> >> >> >> You can reach the person managing the list at
>>> >> >> >> users-owner at lists.opennebula.org
>>> >> >> >>
>>> >> >> >> When replying, please edit your Subject line so it is more
>>> specific
>>> >> >> >> than "Re: Contents of Users digest..."
>>> >> >> >>
>>> >> >> >>
>>> >> >> >> Today's Topics:
>>> >> >> >>
>>> >> >> >> 1. Chef cookbook for OpenNebula (to be used with Vagrant)
>>> >> >> >> (Giovanni Toraldo)
>>> >> >> >>
>>> >> >> >>
>>> >> >> >>
>>> >> >> >>
>>> ----------------------------------------------------------------------
>>> >> >> >>
>>> >> >> >> Message: 1
>>> >> >> >> Date: Sat, 16 Mar 2013 16:13:52 +0100
>>> >> >> >> From: Giovanni Toraldo <me at gionn.net>
>>> >> >> >> To: Users OpenNebula <users at lists.opennebula.org>
>>> >> >> >> Subject: [one-users] Chef cookbook for OpenNebula (to be used
>>> with
>>> >> >> >> Vagrant)
>>> >> >> >> Message-ID:
>>> >> >> >>
>>> >> >> >> <CAAy5=
>>> 2fXPVjPcRaa0MK8HN-_Rx+583GWmQrF0wmYz0UFYCqaxw at mail.gmail.com>
>>> >> >> >> Content-Type: text/plain; charset=UTF-8
>>> >> >> >>
>>> >> >> >> Hi!
>>> >> >> >>
>>> >> >> >> Recently I was interested in using Vagrant plus some Chef
>>> recipes to
>>> >> >> >> easily bootstrap a development machine containing OpenNebula.
>>> >> >> >>
>>> >> >> >> I've published a very basic cookbook that will install build
>>> >> >> >> dependencies and opennebula from sources, served by Vagrant
>>> (tested
>>> >> >> >> under Ubuntu 12.04)
>>> >> >> >>
>>> >> >> >> The GitHub repository of the cookbook:
>>> >> >> >> https://github.com/gionn/chef-opennebula
>>> >> >> >>
>>> >> >> >> If you want to take a look to my Vagrantfile, it's here (along
>>> with
>>> >> >> >> the latest OpenNebula sources):
>>> >> >> >> https://github.com/liberologico/one/blob/vagrant/Vagrantfile
>>> >> >> >>
>>> >> >> >> If someone is interested in expanding this cookbook, pull
>>> requests
>>> >> >> >> are
>>> >> >> >> warmly welcomed (even for fixing crap I put into it)
>>> >> >> >>
>>> >> >> >> Cheers,
>>> >> >> >> --
>>> >> >> >> Giovanni Toraldo
>>> >> >> >> http://gionn.net
>>> >> >> >>
>>> >> >> >>
>>> >> >> >> ------------------------------
>>> >> >> >>
>>> >> >> >> _______________________________________________
>>> >> >> >> Users mailing list
>>> >> >> >> Users at lists.opennebula.org
>>> >> >> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>> >> >> >>
>>> >> >> >>
>>> >> >> >> End of Users Digest, Vol 61, Issue 50
>>> >> >> >> *************************************
>>> >> >> >
>>> >> >> >
>>> >> >> >
>>> >> >> > _______________________________________________
>>> >> >> > Users mailing list
>>> >> >> > Users at lists.opennebula.org
>>> >> >> > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>> >> >> >
>>> >> >
>>> >> >
>>> >> >
>>> >
>>> >
>>> --
>>> Constantino V?zquez Blanco, PhD, MSc | dsa-research.org/tinova
>>> Virtualization Technology Engineer / Researcher
>>> OpenNebula - The Open-Source Solution for Data Center Virtualization
>>> www.OpenNebula.org | @tinova79 | @OpenNebula
>>>
>>>
>>> On Wed, Mar 20, 2013 at 2:46 PM, A B M MONIRUZZAMAN
>>> <abm.mzkhan at gmail.com> wrote:
>>> > Dear
>>> > Thank your for response.
>>> > I am giving you my laptop's basic info. you may find any clue for not
>>> > properly install.
>>> >
>>> > Did I not install packages according to
>>> > http://opennebula.org/cloud:sandboxesx ?
>>> > Should I go for another solution? like Sandbox with Virtualbox or KVM
>>> ? with
>>> > my laptop.
>>> > I have another laptop acer with celeron processor and 2 GB ram, how do
>>> I use
>>> > it for implementing OpenNebula Sandbox ?
>>> >
>>> > Best
>>> >
>>> > A B M Moniruzzaman
>>> >
>>> >
>>> > On Wed, Mar 20, 2013 at 7:20 PM, Tino Vazquez <tinova at opennebula.org>
>>> wrote:
>>> >>
>>> >> Hi,
>>> >>
>>> >> The problem that I mainly see is with screenshot 2.jpg. It is stated
>>> >> there that your laptop doesn't have VT extension in the CPI, so it
>>> >> cannot do nested virtualization. That may be why you cannot properly
>>> >> access the sandbox, since you are running an ESX inside the
>>> >> Workstation, and then the sandbox inside the ESX (nested
>>> >> virtualization).
>>> >>
>>> >
>>> >
>>> >>
>>> >> I would suggest trying to create a new VM in the ESX with a blank disk
>>> >> and see if that boots (even if it is to say that there is no Operating
>>> >> System). If it doesn't, then there is zero chance to get the ESX
>>> >> sandbox working in your setup (you will need at least one more
>>> >> computer).
>>> >>
>>> >> Hope it helps,
>>> >>
>>> >> -Tino
>>> >>
>>> >> --
>>> >> Constantino V?zquez Blanco, PhD, MSc
>>> >> Project Engineer
>>> >> OpenNebula - The Open-Source Solution for Data Center Virtualization
>>> >> www.OpenNebula.org | @tinova79 | @OpenNebula
>>> >>
>>> >>
>>> >> On Wed, Mar 20, 2013 at 2:10 PM, A B M MONIRUZZAMAN
>>> >> <abm.mzkhan at gmail.com> wrote:
>>> >> > Dear
>>> >> >
>>> >> > Please what should I do now ,suggest me.
>>> >> >
>>> >> > I have a presentation Saturday 23 March 2013, and I have to show
>>> >> > OpenNebula
>>> >> > 3.8 ESX Sandbox.
>>> >> >
>>> >> > What I need to show - a prototype of private cloud and access to the
>>> >> > cloud
>>> >> > and use a application in cloud.
>>> >> >
>>> >> > Please give me idea - what packages should I configure within
>>> OpenNebula
>>> >> > site.
>>> >> >
>>> >> > Our university,( Daffodil international University web:
>>> >> > http://www.daffodilvarsity.edu.bd/ ) are just now being
>>> experiencing
>>> >> > with
>>> >> > OpenNebula. They are planning to implement a cloud platforms and
>>> >> > complete
>>> >> > university into the cloud.
>>> >> >
>>> >> > Please early reply to me.
>>> >> >
>>> >> > Best
>>> >> >
>>> >> > A B M Moniruzzaman
>>> >> >
>>> >> >
>>> >> > ---------- Forwarded message ----------
>>> >> > From: A B M MONIRUZZAMAN <abm.mzkhan at gmail.com>
>>> >> > Date: Tue, Mar 19, 2013 at 5:39 PM
>>> >> > Subject: Re: [one-users] Users Digest, Vol 61, Issue 50
>>> >> > To: Tino Vazquez <tinova at opennebula.org>
>>> >> > Cc: A B M Moniruzzaman <mzkhan.2000 at gmail.com>
>>> >> >
>>> >> >
>>> >> > Dear
>>> >> > Thank you for response.
>>> >> >
>>> >> > I successfully have done 1. , 2. , 3. , up to 3.3 according to the
>>> page
>>> >> > http://opennebula.org/cloud:sandboxesx
>>> >> > And its ok.
>>> >> > I am giving you all screen shots by sequence to start the Appliance
>>> that
>>> >> > you
>>> >> > will clearly get idea.
>>> >> >
>>> >> > My laptop is windows 7 with 32 bit; any problem for that?
>>> >> >
>>> >> > Please response this email asap so that I can present to my teacher.
>>> >> >
>>> >> > Regards
>>> >> > Monir
>>> >> >
>>> >> >
>>> >> > On Tue, Mar 19, 2013 at 4:39 PM, Tino Vazquez <
>>> tinova at opennebula.org>
>>> >> > wrote:
>>> >> >>
>>> >> >> Hi,
>>> >> >>
>>> >> >> I would suggest installing the appliance onto an ESX hypervisor,
>>> not
>>> >> >> Workstation.
>>> >> >>
>>> >> >> In any case, please do send the screenshots, they don't seem to be
>>> >> >> attached in your original mail.
>>> >> >>
>>> >> >> Best regards,
>>> >> >>
>>> >> >> -Tino
>>> >> >> --
>>> >> >> Constantino V?zquez Blanco, PhD, MSc
>>> >> >> Project Engineer
>>> >> >> OpenNebula - The Open-Source Solution for Data Center
>>> Virtualization
>>> >> >> www.OpenNebula.org | @tinova79 | @OpenNebula
>>> >> >>
>>> >> >>
>>> >> >> On Sat, Mar 16, 2013 at 8:30 PM, A B M MONIRUZZAMAN
>>> >> >> <abm.mzkhan at gmail.com> wrote:
>>> >> >> > Hi all
>>> >> >> >
>>> >> >> > I am writing to you because I need a little help to successfully
>>> >> >> > implement
>>> >> >> > according to http://opennebula.org/cloud:sandboxesx
>>> >> >> >
>>> >> >> > What I try to do:
>>> >> >> > Implement a open-source private cloud platforms for prototype
>>> testing
>>> >> >> > for
>>> >> >> > educational cloud project.
>>> >> >> >
>>> >> >> > I use this page http://opennebula.org/cloud:tryout , and try
>>> >> >> > according
>>> >> >> > to
>>> >> >> > the page : http://opennebula.org/cloud:sandboxesx
>>> >> >> >
>>> >> >> > What I did:
>>> >> >> > 1. Download and install VMware Workstation 9.0
>>> >> >> > 2. Download OpenNebula 3.8 ESX from the marketplace and use
>>> IZArc
>>> >> >> > for
>>> >> >> > opennebula-3.8-sandbox-vmdk.
>>> >> >> > 3. Upload Sandbox image ESX 5.0.0 to VMware workstation.
>>> >> >> > 4. Download and install VMware vSphere Client use
>>> >> >> > VMware-viclient-all-5.0.0-623373.exe for setup.
>>> >> >> >
>>> >> >> > I successfully have done 1. , 2. , 3. , up to 3.3 according to
>>> the
>>> >> >> > page
>>> >> >> > http://opennebula.org/cloud:sandboxesx
>>> >> >> > But I faced problem at this point the Virtual Machine will be
>>> running
>>> >> >> > ?
>>> >> >> > no
>>> >> >> > login prompt in the VI client console appears
>>> >> >> > I attached few snap shots for better understanding for you of my
>>> >> >> > current
>>> >> >> > state.
>>> >> >> >
>>> >> >> > Please help me to complete implementation this.
>>> >> >> >
>>> >> >> >
>>> >> >> > On Sun, Mar 17, 2013 at 1:07 AM, <
>>> users-request at lists.opennebula.org>
>>> >> >> > wrote:
>>> >> >> >>
>>> >> >> >> Send Users mailing list submissions to
>>> >> >> >> users at lists.opennebula.org
>>> >> >> >>
>>> >> >> >> To subscribe or unsubscribe via the World Wide Web, visit
>>> >> >> >>
>>> >> >> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>> >> >> >> or, via email, send a message with subject or body 'help' to
>>> >> >> >> users-request at lists.opennebula.org
>>> >> >> >>
>>> >> >> >> You can reach the person managing the list at
>>> >> >> >> users-owner at lists.opennebula.org
>>> >> >> >>
>>> >> >> >> When replying, please edit your Subject line so it is more
>>> specific
>>> >> >> >> than "Re: Contents of Users digest..."
>>> >> >> >>
>>> >> >> >>
>>> >> >> >> Today's Topics:
>>> >> >> >>
>>> >> >> >> 1. Chef cookbook for OpenNebula (to be used with Vagrant)
>>> >> >> >> (Giovanni Toraldo)
>>> >> >> >>
>>> >> >> >>
>>> >> >> >>
>>> >> >> >>
>>> ----------------------------------------------------------------------
>>> >> >> >>
>>> >> >> >> Message: 1
>>> >> >> >> Date: Sat, 16 Mar 2013 16:13:52 +0100
>>> >> >> >> From: Giovanni Toraldo <me at gionn.net>
>>> >> >> >> To: Users OpenNebula <users at lists.opennebula.org>
>>> >> >> >> Subject: [one-users] Chef cookbook for OpenNebula (to be used
>>> with
>>> >> >> >> Vagrant)
>>> >> >> >> Message-ID:
>>> >> >> >>
>>> >> >> >> <CAAy5=
>>> 2fXPVjPcRaa0MK8HN-_Rx+583GWmQrF0wmYz0UFYCqaxw at mail.gmail.com>
>>> >> >> >> Content-Type: text/plain; charset=UTF-8
>>> >> >> >>
>>> >> >> >> Hi!
>>> >> >> >>
>>> >> >> >> Recently I was interested in using Vagrant plus some Chef
>>> recipes to
>>> >> >> >> easily bootstrap a development machine containing OpenNebula.
>>> >> >> >>
>>> >> >> >> I've published a very basic cookbook that will install build
>>> >> >> >> dependencies and opennebula from sources, served by Vagrant
>>> (tested
>>> >> >> >> under Ubuntu 12.04)
>>> >> >> >>
>>> >> >> >> The GitHub repository of the cookbook:
>>> >> >> >> https://github.com/gionn/chef-opennebula
>>> >> >> >>
>>> >> >> >> If you want to take a look to my Vagrantfile, it's here (along
>>> with
>>> >> >> >> the latest OpenNebula sources):
>>> >> >> >> https://github.com/liberologico/one/blob/vagrant/Vagrantfile
>>> >> >> >>
>>> >> >> >> If someone is interested in expanding this cookbook, pull
>>> requests
>>> >> >> >> are
>>> >> >> >> warmly welcomed (even for fixing crap I put into it)
>>> >> >> >>
>>> >> >> >> Cheers,
>>> >> >> >> --
>>> >> >> >> Giovanni Toraldo
>>> >> >> >> http://gionn.net
>>> >> >> >>
>>> >> >> >>
>>> >> >> >> ------------------------------
>>> >> >> >>
>>> >> >> >> _______________________________________________
>>> >> >> >> Users mailing list
>>> >> >> >> Users at lists.opennebula.org
>>> >> >> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>> >> >> >>
>>> >> >> >>
>>> >> >> >> End of Users Digest, Vol 61, Issue 50
>>> >> >> >> *************************************
>>> >> >> >
>>> >> >> >
>>> >> >> >
>>> >> >> > _______________________________________________
>>> >> >> > Users mailing list
>>> >> >> > Users at lists.opennebula.org
>>> >> >> > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>> >> >> >
>>> >> >
>>> >> >
>>> >> >
>>> >>
>>> >> --
>>> >> Constantino V?zquez Blanco, PhD, MSc | dsa-research.org/tinova
>>> >> Virtualization Technology Engineer / Researcher
>>> >> OpenNebula - The Open-Source Solution for Data Center Virtualization
>>> >> www.OpenNebula.org | @tinova79 | @OpenNebula
>>> >>
>>> >>
>>> >> On Wed, Mar 20, 2013 at 2:10 PM, A B M MONIRUZZAMAN
>>> >> <abm.mzkhan at gmail.com> wrote:
>>> >> > Dear
>>> >> >
>>> >> > Please what should I do now ,suggest me.
>>> >> >
>>> >> > I have a presentation Saturday 23 March 2013, and I have to show
>>> >> > OpenNebula
>>> >> > 3.8 ESX Sandbox.
>>> >> >
>>> >> > What I need to show - a prototype of private cloud and access to the
>>> >> > cloud
>>> >> > and use a application in cloud.
>>> >> >
>>> >> > Please give me idea - what packages should I configure within
>>> OpenNebula
>>> >> > site.
>>> >> >
>>> >> > Our university,( Daffodil international University web:
>>> >> > http://www.daffodilvarsity.edu.bd/ ) are just now being
>>> experiencing
>>> >> > with
>>> >> > OpenNebula. They are planning to implement a cloud platforms and
>>> >> > complete
>>> >> > university into the cloud.
>>> >> >
>>> >> > Please early reply to me.
>>> >> >
>>> >> > Best
>>> >> >
>>> >> > A B M Moniruzzaman
>>> >> >
>>> >> >
>>> >> > ---------- Forwarded message ----------
>>> >> > From: A B M MONIRUZZAMAN <abm.mzkhan at gmail.com>
>>> >> > Date: Tue, Mar 19, 2013 at 5:39 PM
>>> >> > Subject: Re: [one-users] Users Digest, Vol 61, Issue 50
>>> >> > To: Tino Vazquez <tinova at opennebula.org>
>>> >> > Cc: A B M Moniruzzaman <mzkhan.2000 at gmail.com>
>>> >> >
>>> >> >
>>> >> > Dear
>>> >> > Thank you for response.
>>> >> >
>>> >> > I successfully have done 1. , 2. , 3. , up to 3.3 according to the
>>> page
>>> >> > http://opennebula.org/cloud:sandboxesx
>>> >> > And its ok.
>>> >> > I am giving you all screen shots by sequence to start the Appliance
>>> that
>>> >> > you
>>> >> > will clearly get idea.
>>> >> >
>>> >> > My laptop is windows 7 with 32 bit; any problem for that?
>>> >> >
>>> >> > Please response this email asap so that I can present to my teacher.
>>> >> >
>>> >> > Regards
>>> >> > Monir
>>> >> >
>>> >> >
>>> >> > On Tue, Mar 19, 2013 at 4:39 PM, Tino Vazquez <
>>> tinova at opennebula.org>
>>> >> > wrote:
>>> >> >>
>>> >> >> Hi,
>>> >> >>
>>> >> >> I would suggest installing the appliance onto an ESX hypervisor,
>>> not
>>> >> >> Workstation.
>>> >> >>
>>> >> >> In any case, please do send the screenshots, they don't seem to be
>>> >> >> attached in your original mail.
>>> >> >>
>>> >> >> Best regards,
>>> >> >>
>>> >> >> -Tino
>>> >> >> --
>>> >> >> Constantino V?zquez Blanco, PhD, MSc
>>> >> >> Project Engineer
>>> >> >> OpenNebula - The Open-Source Solution for Data Center
>>> Virtualization
>>> >> >> www.OpenNebula.org | @tinova79 | @OpenNebula
>>> >> >>
>>> >> >>
>>> >> >> On Sat, Mar 16, 2013 at 8:30 PM, A B M MONIRUZZAMAN
>>> >> >> <abm.mzkhan at gmail.com> wrote:
>>> >> >> > Hi all
>>> >> >> >
>>> >> >> > I am writing to you because I need a little help to successfully
>>> >> >> > implement
>>> >> >> > according to http://opennebula.org/cloud:sandboxesx
>>> >> >> >
>>> >> >> > What I try to do:
>>> >> >> > Implement a open-source private cloud platforms for prototype
>>> testing
>>> >> >> > for
>>> >> >> > educational cloud project.
>>> >> >> >
>>> >> >> > I use this page http://opennebula.org/cloud:tryout , and try
>>> >> >> > according
>>> >> >> > to
>>> >> >> > the page : http://opennebula.org/cloud:sandboxesx
>>> >> >> >
>>> >> >> > What I did:
>>> >> >> > 1. Download and install VMware Workstation 9.0
>>> >> >> > 2. Download OpenNebula 3.8 ESX from the marketplace and use
>>> IZArc
>>> >> >> > for
>>> >> >> > opennebula-3.8-sandbox-vmdk.
>>> >> >> > 3. Upload Sandbox image ESX 5.0.0 to VMware workstation.
>>> >> >> > 4. Download and install VMware vSphere Client use
>>> >> >> > VMware-viclient-all-5.0.0-623373.exe for setup.
>>> >> >> >
>>> >> >> > I successfully have done 1. , 2. , 3. , up to 3.3 according to
>>> the
>>> >> >> > page
>>> >> >> > http://opennebula.org/cloud:sandboxesx
>>> >> >> > But I faced problem at this point the Virtual Machine will be
>>> running
>>> >> >> > ?
>>> >> >> > no
>>> >> >> > login prompt in the VI client console appears
>>> >> >> > I attached few snap shots for better understanding for you of my
>>> >> >> > current
>>> >> >> > state.
>>> >> >> >
>>> >> >> > Please help me to complete implementation this.
>>> >> >> >
>>> >> >> >
>>> >> >> > On Sun, Mar 17, 2013 at 1:07 AM, <
>>> users-request at lists.opennebula.org>
>>> >> >> > wrote:
>>> >> >> >>
>>> >> >> >> Send Users mailing list submissions to
>>> >> >> >> users at lists.opennebula.org
>>> >> >> >>
>>> >> >> >> To subscribe or unsubscribe via the World Wide Web, visit
>>> >> >> >>
>>> >> >> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>> >> >> >> or, via email, send a message with subject or body 'help' to
>>> >> >> >> users-request at lists.opennebula.org
>>> >> >> >>
>>> >> >> >> You can reach the person managing the list at
>>> >> >> >> users-owner at lists.opennebula.org
>>> >> >> >>
>>> >> >> >> When replying, please edit your Subject line so it is more
>>> specific
>>> >> >> >> than "Re: Contents of Users digest..."
>>> >> >> >>
>>> >> >> >>
>>> >> >> >> Today's Topics:
>>> >> >> >>
>>> >> >> >> 1. Chef cookbook for OpenNebula (to be used with Vagrant)
>>> >> >> >> (Giovanni Toraldo)
>>> >> >> >>
>>> >> >> >>
>>> >> >> >>
>>> >> >> >>
>>> ----------------------------------------------------------------------
>>> >> >> >>
>>> >> >> >> Message: 1
>>> >> >> >> Date: Sat, 16 Mar 2013 16:13:52 +0100
>>> >> >> >> From: Giovanni Toraldo <me at gionn.net>
>>> >> >> >> To: Users OpenNebula <users at lists.opennebula.org>
>>> >> >> >> Subject: [one-users] Chef cookbook for OpenNebula (to be used
>>> with
>>> >> >> >> Vagrant)
>>> >> >> >> Message-ID:
>>> >> >> >>
>>> >> >> >> <CAAy5=
>>> 2fXPVjPcRaa0MK8HN-_Rx+583GWmQrF0wmYz0UFYCqaxw at mail.gmail.com>
>>> >> >> >> Content-Type: text/plain; charset=UTF-8
>>> >> >> >>
>>> >> >> >> Hi!
>>> >> >> >>
>>> >> >> >> Recently I was interested in using Vagrant plus some Chef
>>> recipes to
>>> >> >> >> easily bootstrap a development machine containing OpenNebula.
>>> >> >> >>
>>> >> >> >> I've published a very basic cookbook that will install build
>>> >> >> >> dependencies and opennebula from sources, served by Vagrant
>>> (tested
>>> >> >> >> under Ubuntu 12.04)
>>> >> >> >>
>>> >> >> >> The GitHub repository of the cookbook:
>>> >> >> >> https://github.com/gionn/chef-opennebula
>>> >> >> >>
>>> >> >> >> If you want to take a look to my Vagrantfile, it's here (along
>>> with
>>> >> >> >> the latest OpenNebula sources):
>>> >> >> >> https://github.com/liberologico/one/blob/vagrant/Vagrantfile
>>> >> >> >>
>>> >> >> >> If someone is interested in expanding this cookbook, pull
>>> requests
>>> >> >> >> are
>>> >> >> >> warmly welcomed (even for fixing crap I put into it)
>>> >> >> >>
>>> >> >> >> Cheers,
>>> >> >> >> --
>>> >> >> >> Giovanni Toraldo
>>> >> >> >> http://gionn.net
>>> >> >> >>
>>> >> >> >>
>>> >> >> >> ------------------------------
>>> >> >> >>
>>> >> >> >> _______________________________________________
>>> >> >> >> Users mailing list
>>> >> >> >> Users at lists.opennebula.org
>>> >> >> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>> >> >> >>
>>> >> >> >>
>>> >> >> >> End of Users Digest, Vol 61, Issue 50
>>> >> >> >> *************************************
>>> >> >> >
>>> >> >> >
>>> >> >> >
>>> >> >> > _______________________________________________
>>> >> >> > Users mailing list
>>> >> >> > Users at lists.opennebula.org
>>> >> >> > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>> >> >> >
>>> >> >
>>> >> >
>>> >> >
>>> >
>>> >
>>>
>>>
>>> ------------------------------
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at lists.opennebula.org
>>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>>
>>>
>>> End of Users Digest, Vol 61, Issue 59
>>> *************************************
>>>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.opennebula.org
>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20130324/1983172d/attachment-0001.htm>
More information about the Users
mailing list