[one-users] ubuntu-image from marketplace doesn't get an IP

[Javier Fontan]

Can you check that virbr0 bridge is associated to a physical
interface? You can use "brctl show" to get that info.

On Thu, Jan 17, 2013 at 2:42 PM, Marco Jagodzinska
<jagodzinska at fh-aachen.de> wrote:
> Hello,
>
> I'm trying to get the ubuntu image from the marketplace running, but the VM
> doesn't seem to get an IP.
> (I don't get another IP in this net even if I scan with nmap.)
>
> This is my virtual net:
>
> oneadmin at Arbeitsrechner:~/one-templates$ ifconfig virbr0
> virbr0    Link encap:Ethernet  Hardware Adresse 00:00:00:00:00:00
>           inet Adresse:192.168.122.1  Bcast:192.168.122.255
> Maske:255.255.255.0
>           UP BROADCAST MULTICAST  MTU:1500  Metrik:1
>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:2726 errors:0 dropped:0 overruns:0 carrier:0
>           Kollisionen:0 Sendewarteschlangenlänge:0
>           RX-Bytes:0 (0.0 B)  TX-Bytes:191341 (191.3 KB)
>
> This is the template for "onevnet create small_network.net":
>
> oneadmin at Arbeitsrechner:~/one-templates$ cat network/small_network.net
> NAME = "public"
> TYPE = FIXED
>
> BRIDGE = virbr0
> LEASES = [ IP="192.168.122.5"]
> LEASES = [ IP="192.168.122.6"]
> LEASES = [ IP="192.168.122.7"]
>
> NETWORK_ADDRESS=192.168.122.0
> NETWORK_MASK=255.255.255.0
> GATEWAY=192.168.122.1
> DNS=192.168.122.1
>
>
> And finally this is the template for "onevm create ubuntu.one"
>
> oneadmin at Arbeitsrechner:~/one-templates$ cat ubuntu.one
> NAME = ubuntu
>
> CPU    = 0.7
> MEMORY = 1024
>
> DISK = [ IMAGE = "ubuntu" ]
> NIC  = [ NETWORK = "public" ]
>
> FEATURES = [ acpi="no" ]
>
> CONTEXT=[
>   ETH0_IP = "$NIC[IP, NETWORK=\"public\"]",
>   ETH0_NETWORK = "$NETWORK[NETWORK_ADDRESS, NETWORK=\"public\"]",
>   ETH0_MASK = "$NETWORK[NETWORK_MASK, NETWORK=\"public\"]",
>   ETH0_GATEWAY = "$NETWORK[GATEWAY, NETWORK=\"public\"]",
>   ETH0_DNS = "$NETWORK[DNS, NETWORK=\"public\"]",
>   SSH_PUBLIC_KEY = "ssh-rsa
> AAAAB3NzaC1yc2EAAAADAQABAAABAQCo0VdfEFgPO6fzNYiKvH19jmF/6ARD0O41VyKal8fE0WpBL54SzwbnP5TjjIojDPF4BHKeAQ7P9DehUZHWsrOzpEe862AsDBjeJXK3MPO8pSztS11fUb84sxFoPlrvzX6VkiVD7D1CDVV8Jq4cudOe+DGAreQXV408mF9RAMT7G4jkawd99YF4a5NmvnCxqSp+Fi6GBW/g36w0p6JKYzSKnqzGQZ8phrE6FL63lfO/OnlDgD/xntJ+bVx4MUI/MJS0OKoDvMsjfirYtOLNeuaH6SFDHlK/EJE2jocLrzB+BhalFgfsCm3oCuIyzi+AHRy9F3dNME+4K96PyJsCPZ/T
> oneadmin at Arbeitsrechner"
> ]
>
> (infos are from here
> http://opennebula.org/documentation:rel3.8:context_overview#preparing_the_template
> )
>
> (The image is registered:
> oneadmin at Arbeitsrechner:/var/log/one$ oneimage list
>   ID USER       GROUP      NAME            DATASTORE     SIZE TYPE PER STAT
> RVMS
>    3 oneadmin   oneadmin   ubuntu          default        11G OS    No used
> 1
> )
>
> Onebody knows what I'm doing wrong?
>
> Cheers,
> Marco
>
> _______________________________________________
> Users mailing list
> Users at lists.opennebula.org
> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>



-- 
Javier Fontán Muiños
Project Engineer
OpenNebula - The Open Source Toolkit for Data Center Virtualization
www.OpenNebula.org | jfontan at opennebula.org | @OpenNebula