[one-users] NICs configuration

Carlos Martín Sánchez cmartin at opennebula.org
Tue Feb 19 02:07:56 PST 2013


Hi,

I've checked that template, the 3 NICs are created correctly, and the
deployment file contains the 3 network interfaces. It must be a limitation
of ttylinux.

Regards
--
Carlos Martín, MSc
Project Engineer
OpenNebula - The Open-source Solution for Data Center Virtualization
www.OpenNebula.org | cmartin at opennebula.org |
@OpenNebula<http://twitter.com/opennebula><cmartin at opennebula.org>


On Mon, Feb 18, 2013 at 8:06 PM, Túlio Gomes
<tulio.gomesbarbosa at gmail.com>wrote:

> Hi guys,
>
> i'd tried to deploy a virtual machine with three nic's using the following
> template:
>
> <TEMPLATE>
>  <CPU>0.2</CPU>
> <MEMORY>128</MEMORY>
>  <DISK> <IMAGE_ID>7</IMAGE_ID> </DISK>
> <NIC> <NETWORK_ID>26</NETWORK_ID> </NIC> <!-- control network -->
>  <NIC> <NETWORK_ID>23</NETWORK_ID> </NIC> <!-- test network 1; vlan
> isolation -->
> <NIC> <NETWORK_ID>25</NETWORK_ID> </NIC> <!-- test network 2; vlan
> isolation -->
> </TEMPLATE>
>
> I also used the ttylinux image available at opennebula marketplace.
>
> The deploy was completed successfully, but when i ssh the vm i'd noticed
> that only two nics was configured (eth0 and eth1).
>
> What can i do to configure all the nics using the NIC attribute?
>
> --
> Atenciosamente,
> Túlio Gomes Barbosa
> br.linkedin.com/in/tuliogomesbarbosa
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opennebula.org
> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20130219/2d9002a5/attachment-0002.htm>


More information about the Users mailing list