[one-users] created vm in failed state (help)
Daniel Molina
dmolina at opennebula.org
Fri Aug 2 03:09:50 PDT 2013
Hi,
On 22 July 2013 11:02, Mario Sickert <sickma at gmx.net> wrote:
> Hey chummers,
>
> What do you mean with "marketplace connection is made from the server and
> not from the client"? How can i access marketplace from frontend?
>
I tried to set http_proxy when "one" was running by "sunstone-server stop"
> -> set the http proxy -> "sunstone-server start" but i can't access
> marketplace from frontend.
>
Try changing the marketplace_url attribute in your
''/etc/one/sunstone-server.conf''
from:
:marketplace_url: https://marketplace.c12g.com/appliance
to:
:marketplace_url: http://marketplace.c12g.com/appliance
and restart sunstone-server after that.
Cheers
> Regards, M.
>
>
> Am 26.06.2013 11:34, schrieb Daniel Molina:
>
> Hi Mario,
>
>
> On 24 June 2013 16:45, Mario Sickert <sickma at gmx.net> wrote:
>
>> Hey,
>>
>> thx, it caused on the proxy. Now VM are hostet. VNC works too. On both
>> Hosts. Thanks all for the quick and professional help!
>>
>> But now Marketplace is no more reachable from sunstone. Even, when i set
>> http_proxy. From browser there is no problem to connect marketplace.
>> How to fix?
>>
>
> The marketplace connection is made from the server and not from the
> client. So if you want to acces the marketplace you have to set the
> http_proxy env var before starting sunstone-server. Note that this variable
> cannot be defined when starting the scheduler (one start), or you will get
> again the problem you faced in previous messages.
>
> Hope this helps
>
>
>>
>> Regards, M.
>>
>>
>> Am 24.06.2013 15:30, schrieb Carlos Martín Sánchez:
>>
>> Hi,
>>
>> Usually that error message appears if you changed the default oned port
>> in oned.conf. If this is the case, you need to update in also in sched.conf
>> Also make sure that the http_proxy environment variable is not set when
>> you start opennebula
>>
>> Regards
>>
>>
>> --
>> Join us at OpenNebulaConf2013 <http://opennebulaconf.com> in Berlin,
>> 24-26 September, 2013
>> --
>> Carlos Martín, MSc
>> Project Engineer
>> OpenNebula - The Open-source Solution for Data Center Virtualization
>> www.OpenNebula.org | cmartin at opennebula.org | @OpenNebula<http://twitter.com/opennebula>
>>
>>
>> On Mon, Jun 24, 2013 at 3:06 PM, Mario Sickert <sickma at gmx.net> wrote:
>>
>>> Hey,
>>>
>>> 'mm_sched' is running.
>>>
>>> 'sched.log'
>>>
>>> Mon Jun 24 08:18:10 2013 [SCHED][I]: Init Scheduler Log system
>>> Mon Jun 24 08:18:10 2013 [SCHED][I]: Starting Scheduler Daemon
>>> ----------------------------------------
>>> Scheduler Configuration File
>>> ----------------------------------------
>>> DEFAULT_SCHED=POLICY=1
>>> HYPERVISOR_MEM=0.1
>>> LIVE_RESCHEDS=0
>>> LOG=DEBUG_LEVEL=3,SYSTEM=file
>>> MAX_DISPATCH=30
>>> MAX_HOST=1
>>> MAX_VM=5000
>>> ONED_PORT=2633
>>> SCHED_INTERVAL=30
>>> ----------------------------------------
>>> Mon Jun 24 08:18:10 2013 [SCHED][I]: Starting scheduler loop...
>>> Mon Jun 24 08:18:10 2013 [SCHED][I]: Scheduler loop started.
>>> Mon Jun 24 08:18:39 2013 [VM][E]: Exception raised: Unable to transport
>>> XML to server and get XML response back. HTTP response code is 403, not 200
>>> Mon Jun 24 08:18:39 2013 [POOL][E]: Could not retrieve pool info from ONE
>>> Mon Jun 24 08:18:39 2013 [VM][E]: Exception raised: Unable to transport
>>> XML to server and get XML response back. HTTP response code is 403, not 200
>>> Mon Jun 24 08:18:39 2013 [POOL][E]: Could not retrieve pool info from ONE
>>>
>>> Looks like a problem...
>>>
>>> Regards,
>>> Mario
>>>
>>> Am 24.06.2013 14 <24.06.2013%2014>:46, schrieb Carlos Martín Sánchez:
>>>
>>> Hi,
>>>
>>> Is the scheduler running properly? Look for the 'mm_sched' process,
>>> and check if it is trying to dispatch your VMs in /var/log/one/sched.log
>>>
>>> Regards
>>>
>>> --
>>> Join us at OpenNebulaConf2013 <http://opennebulaconf.com> in Berlin,
>>> 24-26 September, 2013
>>> --
>>> Carlos Martín, MSc
>>> Project Engineer
>>> OpenNebula - The Open-source Solution for Data Center Virtualization
>>> www.OpenNebula.org | cmartin at opennebula.org | @OpenNebula<http://twitter.com/opennebula>
>>>
>>>
>>> On Mon, Jun 24, 2013 at 11:54 AM, Mario Sickert <sickma at gmx.net>wrote:
>>>
>>>> Hey,
>>>> thx for fast reply,
>>>>
>>>> onehost list
>>>> ID NAME CLUSTER RVM ALLOCATED_CPU
>>>> ALLOCATED_MEM STAT
>>>> 0 srv0050 - 0 0 / 1600
>>>> (0%) 0K / 35.3G (0%) on
>>>> 1 srv0051 - 0 0 / 1600
>>>> (0%) 0K / 64.9G (0%) on
>>>>
>>>> There are actually no error messages from VM.
>>>> VM.log is empty because of pending.
>>>>
>>>> i'm using 'ssh' drivers for TM_MAD.
>>>>
>>>> Regards,
>>>> M.
>>>>
>>>> Am 24.06.2013 11 <24.06.2013%2011>:28, schrieb Carlos Martín Sánchez:
>>>>
>>>> Hi,
>>>>
>>>> On Mon, Jun 24, 2013 at 9:52 AM, Mario Sickert <sickma at gmx.net>wrote:
>>>>
>>>>> hey,
>>>>>
>>>>> resources on hosts are fine. VM still in pending status.
>>>>>
>>>>
>>>> Could you please paste the output of 'onehost list' ?
>>>>
>>>>
>>>>> It seems to be still the problem for system to copy images to hosts.
>>>>>
>>>>
>>>> Where do you get this error message? Are not all the VMs in pending
>>>> state?
>>>>
>>>>
>>>>> Am i forced to create a cluster or is it enough to use my both
>>>>> physical hosts separatly without any clustering?
>>>>>
>>>>
>>>> Clusters are completely optional, you don't need to create any.
>>>>
>>>>
>>>>> Do i have to mount any directory on hosts or frontend manually even
>>>>> when i do not use any clusters?
>>>>>
>>>>
>>>> If you use the 'shared' TM_MAD driver, then yes, the datastore
>>>> directories must be shared between your frontend and hosts, and mounted in
>>>> the same path.
>>>> If you prefer to copy the files via scp, use the 'ssh' drivers instead.
>>>>
>>>> Regards
>>>>
>>>> --
>>>> Join us at OpenNebulaConf2013 <http://opennebulaconf.com/> in Berlin,
>>>> 24-26 September, 2013
>>>> --
>>>> Carlos Martín, MSc
>>>> Project Engineer
>>>> OpenNebula - The Open-source Solution for Data Center Virtualization
>>>> www.OpenNebula.org <http://www.opennebula.org/> |
>>>> cmartin at opennebula.org | @OpenNebula <http://twitter.com/opennebula>
>>>>
>>>>
>>>>
>>>>> Regards,
>>>>> M.
>>>>>
>>>>> Hi,
>>>>>
>>>>>
>>>>> On Mon, Jun 17, 2013 at 9:19 AM, Mario Sickert <sickma at gmx.net> <sickma at gmx.net> wrote:
>>>>>
>>>>>
>>>>> hello,
>>>>>
>>>>> i changed the datastore template of [system (ID0)] [TM_MAD] from "shared" to "ssh".
>>>>> No improvements. VM after creating falling in pending mode.
>>>>>
>>>>> If the VMs stay in pending you may have run out of resources in your
>>>>>
>>>>> hosts.
>>>>>
>>>>>
>>>>> onedatastore list looks like this:
>>>>>
>>>>> ID/NAME/CLUSTER/IMAGE/TYPE/DS/TM
>>>>> 0/system/-/0/sys/-/ssh
>>>>> 1/default/-/2/img/fs/shared
>>>>> 2/files/-/0/fil/fs/ssh
>>>>>
>>>>> I changed [default] to "ssh" too. but no improvements. So i changed back too "shared".
>>>>>
>>>>> What do you mean by no improvements? Do you have any error messages?
>>>>>
>>>>> What about DS on ID0? its blank.
>>>>>
>>>>> The system datastore cannot be used to register new images, that's why it
>>>>>
>>>>> doesn't have a DS_MAD.
>>>>>
>>>>>
>>>>> Do i have to configure something else on hosts?
>>>>>
>>>>>
>>>>>
>>>>> Well, if you changed the driver back to 'shared', you need to configure the
>>>>> shared storage (NFS or similar).
>>>>>
>>>>> Regards
>>>>>
>>>>>
>>>>> --
>>>>> Join us at OpenNebulaConf2013 <http://opennebulaconf.com/> <http://opennebulaconf.com/> in Berlin, 24-26
>>>>> September, 2013
>>>>> --
>>>>> Carlos Mart?n, MSc
>>>>> Project Engineer
>>>>> OpenNebula - The Open-source Solution for Data Center Virtualizationwww.OpenNebula.org <http://www.opennebula.org/> <http://www.opennebula.org/> | cmartin at opennebula.org |
>>>>> @OpenNebula <http://twitter.com/opennebula> <http://twitter.com/opennebula> <cmartin at opennebula.org> <cmartin at opennebula.org>
>>>>>
>>>>> Greetings, M.
>>>>>
>>>>> ------------------------------
>>>>>
>>>>> Message: 6
>>>>> Date: Mon, 10 Jun 2013 19:13:00 +0200
>>>>> From: Carlos Mart?n S?nchez <cmartin at opennebula.org> <cmartin at opennebula.org> <cmartin at opennebula.org> <cmartin at opennebula.org>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> To: Mario Sickert <sickma at gmx.net> <sickma at gmx.net> <sickma at gmx.net> <sickma at gmx.net>
>>>>> Cc: users <users at lists.opennebula.org> <users at lists.opennebula.org> <users at lists.opennebula.org> <users at lists.opennebula.org>
>>>>>
>>>>>
>>>>> Subject: Re: [one-users] created vm in failed state (help)
>>>>> Message-ID:
>>>>> <CAEPYvFLd=Uagicd1ocKznOZsLeXT113=wU+7JfSH5HfiSMateA at mail.gmail.com> <CAEPYvFLd=Uagicd1ocKznOZsLeXT113=wU+7JfSH5HfiSMateA at mail.gmail.com> <CAEPYvFLd=Uagicd1ocKznOZsLeXT113=wU+7JfSH5HfiSMateA at mail.gmail.com> <CAEPYvFLd=Uagicd1ocKznOZsLeXT113=wU+7JfSH5HfiSMateA at mail.gmail.com>
>>>>> Content-Type: text/plain; charset="iso-8859-1"
>>>>>
>>>>> Hi,
>>>>>
>>>>> If you do a onedatastore list/show, you'll see that your datastores use the
>>>>> shared tm driver. This driver requires the datastore paths to be shared,
>>>>> via nfs or other means. If you want to use the 'ssh' transfer drivers
>>>>> instead, do a onedatastore update and change the template.
>>>>>
>>>>> Regards
>>>>>
>>>>> --
>>>>> Join us at OpenNebulaConf2013 <http://opennebulaconf.com> <http://opennebulaconf.com> <http://opennebulaconf.com> <http://opennebulaconf.com> in Berlin, 24-26
>>>>> September, 2013
>>>>> --
>>>>> Carlos Mart?n, MSc
>>>>> Project Engineer
>>>>> OpenNebula - The Open-source Solution for Data Center Virtualizationwww.OpenNebula.org | cmartin at opennebula.org |
>>>>> @OpenNebula<http://twitter.com/opennebula> <http://twitter.com/opennebula> <http://twitter.com/opennebula> <http://twitter.com/opennebula><cmartin at opennebula.org> <cmartin at opennebula.org> <cmartin at opennebula.org> <cmartin at opennebula.org>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Mon, Jun 10, 2013 at 12:04 PM, Mario Sickert <sickma at gmx.net> <sickma at gmx.net> <sickma at gmx.net> <sickma at gmx.net>
>>>>> wrote:
>>>>>
>>>>>
>>>>> Hi again,
>>>>>
>>>>> datastore paths are correct. Oneadmin has all nessesary rights on hosts.
>>>>> I fund out that there is a problem with the [cp] command like to see in
>>>>> logs. i tried to copy the images by my own. It dos'nt work with [cp], but
>>>>> it works with [scp] ... spooky...
>>>>> Any ideas to fix this?
>>>>>
>>>>> Thx, M.
>>>>>
>>>>> Date: Mon, 3 Jun 2013 18:17:01 +0200
>>>>> From: Carlos Mart?n S?nchez <cmartin at opennebula.org> <cmartin at opennebula.org> <cmartin at opennebula.org> <cmartin at opennebula.org> <cmartin at opennebula.org> <cmartin at opennebula.org> <cmartin at opennebula.org> <cmartin at opennebula.org>
>>>>> To: Mario Sickert <sickma at gmx.net> <sickma at gmx.net> <sickma at gmx.net> <sickma at gmx.net> <sickma at gmx.net> <sickma at gmx.net> <sickma at gmx.net> <sickma at gmx.net>
>>>>> Cc: users <users at lists.opennebula.org> <users at lists.opennebula.org> <users at lists.opennebula.org> <users at lists.opennebula.org> <users at lists.opennebula.org> <users at lists.opennebula.org> <users at lists.opennebula.org> <users at lists.opennebula.org>
>>>>> Subject: Re: [one-users] created vm in failed state (help)
>>>>> Message-ID:
>>>>> <CAEPYvFLdxcpppy5GPPi4mDogn8D8vJcDqJgEZWV=XyWkcwBq7w at mail.gmail.com> <CAEPYvFLdxcpppy5GPPi4mDogn8D8vJcDqJgEZWV=XyWkcwBq7w at mail.gmail.com> <CAEPYvFLdxcpppy5GPPi4mDogn8D8vJcDqJgEZWV=XyWkcwBq7w at mail.gmail.com> <CAEPYvFLdxcpppy5GPPi4mDogn8D8vJcDqJgEZWV=XyWkcwBq7w at mail.gmail.com> <CAEPYvFLdxcpppy5GPPi4mDogn8D8vJcDqJgEZWV=XyWkcwBq7w at mail.gmail.com> <CAEPYvFLdxcpppy5GPPi4mDogn8D8vJcDqJgEZWV=XyWkcwBq7w at mail.gmail.com> <CAEPYvFLdxcpppy5GPPi4mDogn8D8vJcDqJgEZWV=XyWkcwBq7w at mail.gmail.com> <CAEPYvFLdxcpppy5GPPi4mDogn8D8vJcDqJgEZWV=XyWkcwBq7w at mail.gmail.com>
>>>>> Content-Type: text/plain; charset="windows-1252"
>>>>>
>>>>> Hi,
>>>>>
>>>>> It may be a problem with your shared storage. Please check that the
>>>>> datastore paths are correctly exported to the hosts, and that oneadmin has
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> rights to use them.
>>>>>
>>>>> Cheers
>>>>>
>>>>> --
>>>>> Join us at OpenNebulaConf2013 <http://opennebulaconf.com> <http://opennebulaconf.com> <http://opennebulaconf.com> <http://opennebulaconf.com> <http://opennebulaconf.com> <http://opennebulaconf.com> <http://opennebulaconf.com> <http://opennebulaconf.com> in Berlin, 24-26
>>>>> September, 2013
>>>>> --
>>>>> Carlos Mart?n, MSc
>>>>> Project Engineer
>>>>> OpenNebula - The Open-source Solution for Data Center Virtualizationwww.OpenNebula.org | cmartin at opennebula.org |
>>>>> @OpenNebula<http://twitter.com/opennebula> <http://twitter.com/opennebula> <http://twitter.com/opennebula> <http://twitter.com/opennebula> <http://twitter.com/opennebula> <http://twitter.com/opennebula> <http://twitter.com/opennebula> <http://twitter.com/opennebula><cmartin at opennebula.org> <cmartin at opennebula.org> <cmartin at opennebula.org> <cmartin at opennebula.org> <cmartin at opennebula.org> <cmartin at opennebula.org> <cmartin at opennebula.org> <cmartin at opennebula.org>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Mon, Jun 3, 2013 at 2:51 PM, Mario Sickert <sickma at gmx.net> <sickma at gmx.net> <sickma at gmx.net> <sickma at gmx.net> <sickma at gmx.net> <sickma at gmx.net> <sickma at gmx.net> <sickma at gmx.net>
>>>>> wrote:
>>>>>
>>>>>
>>>>> Hey geeks,
>>>>>
>>>>> i dit an Update to 4.0.1 on Ubuntu 12.10
>>>>> All fine with doing it.
>>>>> My two host are added well. Image download over Sunstone works really
>>>>> great. Network and template creation going well.
>>>>>
>>>>> But when i create vm on host1 or host2 it still ends in failed status.
>>>>> http-proxy is off.
>>>>> ssh-auth works fine in both direction.
>>>>>
>>>>> vm.log:
>>>>>
>>>>> Mon Jun 3 14:07:30 2013 [DiM][I]: New VM state is ACTIVE.
>>>>> Mon Jun 3 14:07:30 2013 [LCM][I]: New VM state is PROLOG.
>>>>> Mon Jun 3 14:07:31 2013 [TM][I]: Command execution fail:
>>>>> ***/var/lib/one/remotes/tm/*****shared/clone frontend:***/var/lib/one/*****
>>>>> datastores/1/**421ee77be4d73a27f761c1646bc76c**af srv0050:/var/lib/one//**datastores/0/8/disk.0
>>>>> 8 1
>>>>> Mon Jun 3 14:07:31 2013 [TM][I]: clone: Cloning /var/lib/one/datastores/1/
>>>>> **421ee77be4d73a27f761c1646bc76c**af in srv0050:/var/lib/one//**
>>>>> datastores/0/8/disk.0
>>>>> Mon Jun 3 14:07:31 2013 [TM][E]: clone: Command "cd
>>>>> /var/lib/one/datastores/0/8; cp -r /var/lib/one/datastores/1/**
>>>>> 421ee77be4d73a27f761c1646bc76c**af /var/lib/one/datastores/0/8/**disk.0"
>>>>> failed: cp: der Aufruf von stat f?r ?/var/lib/one/datastores/1/**
>>>>> 421ee77be4d73a27f761c1646bc76c**af? ist nicht m?glich: Datei oder
>>>>> Verzeichnis nicht gefunden
>>>>> Mon Jun 3 14:07:31 2013 [TM][E]: Error copying frontend:***/var/lib/one/*****
>>>>> datastores/1/**421ee77be4d73a27f761c1646bc76c**af to
>>>>> srv0050:/var/lib/one//**datastores/0/8/disk.0
>>>>> Mon Jun 3 14:07:31 2013 [TM][I]: ExitCode: 1
>>>>> Mon Jun 3 14:07:31 2013 [TM][E]: Error executing image transfer script:
>>>>> Error copying frontend:***/var/lib/one/*****datastores/1/**
>>>>> 421ee77be4d73a27f761c1646bc76c**af to srv0050:/var/lib/one//**
>>>>> datastores/0/8/disk.0
>>>>> Mon Jun 3 14:07:31 2013 [DiM][I]: New VM state is FAILED
>>>>>
>>>>> thanks for help,
>>>>> Mario
>>>>> ______________________________
>>>>> **_________________
>>>>> Users mailing listUsers at lists.opennebula.orghttp://lists.opennebula.org/**listinfo.cgi/users-opennebula.**org<http://lists.opennebula.org/listinfo.cgi/users-opennebula.org> <http://lists.opennebula.org/listinfo.cgi/users-opennebula.org> <http://lists.opennebula.org/listinfo.cgi/users-opennebula.org> <http://lists.opennebula.org/listinfo.cgi/users-opennebula.org> <http://lists.opennebula.org/listinfo.cgi/users-opennebula.org> <http://lists.opennebula.org/listinfo.cgi/users-opennebula.org>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> <http://lists.opennebula.org/listinfo.cgi/users-opennebula.org&
>>>>> amp;
>>>>> gt; <http://lists.opennebula.org/listinfo.cgi/users-opennebula.org>
>>>>>
>>>>>
>>>>>
>>>>> -------------- next part --------------
>>>>> An HTML attachment was scrubbed...
>>>>> URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20130610/c54dc313/attachment.htm> <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20130610/c54dc313/attachment.htm> <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20130610/c54dc313/attachment.htm> <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20130610/c54dc313/attachment.htm>
>>>>>
>>>>> ------------------------------
>>>>>
>>>>> _______________________________________________
>>>>> Users mailing listUsers at lists.opennebula.orghttp://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> End of Users Digest, Vol 64, Issue 41
>>>>> *************************************
>>>>>
>>>>>
>>>>>
>>>>> -------------- next part --------------
>>>>> An HTML attachment was scrubbed...
>>>>> URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20130617/7f82d311/attachment.htm> <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20130617/7f82d311/attachment.htm>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> ------------------------------
>>>>>
>>>>> _______________________________________________
>>>>> Users mailing listUsers at lists.opennebula.orghttp://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>>>>
>>>>>
>>>>>
>>>> E-Mail ist virenfrei.
>>>> Von AVG überprüft - www.avg.de
>>>> Version: 2013.0.3345 / Virendatenbank: 3199/6435 - Ausgabedatum:
>>>> 23.06.2013
>>>>
>>>>
>>>>
>>> E-Mail ist virenfrei.
>>> Von AVG überprüft - www.avg.de
>>> Version: 2013.0.3345 / Virendatenbank: 3199/6435 - Ausgabedatum:
>>> 23.06.2013
>>>
>>>
>>>
>> E-Mail ist virenfrei.
>> Von AVG überprüft - www.avg.de
>> Version: 2013.0.3345 / Virendatenbank: 3199/6435 - Ausgabedatum:
>> 23.06.2013
>>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.opennebula.org
>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>
>>
>
>
> --
> Join us at OpenNebulaConf2013 <http://opennebulaconf.com/> in Berlin,
> 24-26 September, 2013
> --
> Daniel Molina
> Project Engineer
> OpenNebula - The Open Source Solution for Data Center Virtualization
> www.OpenNebula.org | dmolina at opennebula.org | @OpenNebula
>
> E-Mail ist virenfrei.
> Von AVG überprüft - www.avg.de
> Version: 2013.0.3345 / Virendatenbank: 3204/6441 - Ausgabedatum:
> 25.06.2013
>
>
>
--
Join us at OpenNebulaConf2013 <http://opennebulaconf.com/> in Berlin, 24-26
September, 2013
--
Daniel Molina
Project Engineer
OpenNebula - The Open Source Solution for Data Center Virtualization
www.OpenNebula.org | dmolina at opennebula.org | @OpenNebula
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20130802/1e98db42/attachment-0001.htm>
More information about the Users
mailing list