[one-users] Onevm in Failed state
Preetham Nagaraju
preetham.nagaraju at gmail.com
Thu Apr 18 04:01:43 PDT 2013
Hi,
If i try to import OS which supports xen i.e. Debian Squeeze-xen image
also, the vm created using this image also goes to "Failed" state...
On Thu, Apr 18, 2013 at 12:48 PM, Preetham Nagaraju <
preetham.nagaraju at gmail.com> wrote:
> *Hi Sir,*
>
> You were right sir, it was ttylinux-kvm image i was using.....
>
> Since i have 2 m/c's with 2 different hypervisor's, i am not getting any
> image common to both in Marketplace....
>
> So i downloaded Ubuntu 12.04 desktop.iso os and directly uploaded the
> image.....
> Went directly to "Image" tab selected "Create" and "Uploaded" the
> downloaded image by giving the path... Image was uploaded successfully....
>
> Then created "Template" with updating info in "General, Storage, Network,
> Input/Output" tabs... Template was created.....
>
> And then gave Instantiate with vm's as 2 but the vm in 2nd node is same in
> * "Failed"* state..... Please find the attachment for failed vm log
> file....
>
> And also vm in the 1st node is in "Running" state but there is network in
> it... i.e internet is not working....
>
>
>
> On Wed, Apr 17, 2013 at 10:23 PM, Carlos Martín Sánchez <
> cmartin at opennebula.org> wrote:
>
>> Can you doble-check that? I can only see ttylinux appliances for kvm and
>> vmware.
>>
>> --
>> Carlos Martín, MSc
>> Project Engineer
>> OpenNebula - The Open-source Solution for Data Center Virtualization
>> www.OpenNebula.org | cmartin at opennebula.org | @OpenNebula<http://twitter.com/opennebula><cmartin at opennebula.org>
>>
>>
>> On Wed, Apr 17, 2013 at 6:38 PM, Preetham Nagaraju <
>> preetham.nagaraju at gmail.com> wrote:
>>
>>> Hi,
>>>
>>> But i am importing the ttylinux-xen image only from Marketplace......
>>>
>>>
>>> On Wed, Apr 17, 2013 at 9:12 PM, Carlos Martín Sánchez <
>>> cmartin at opennebula.org> wrote:
>>>
>>>> Hi,
>>>>
>>>> OpenNebula will not convert the KVM ttylinux VM to a Xen ready VM. You
>>>> need to create or import a xen-ready VM.
>>>>
>>>> Regards
>>>>
>>>> --
>>>> Carlos Martín, MSc
>>>> Project Engineer
>>>> OpenNebula - The Open-source Solution for Data Center Virtualization
>>>> www.OpenNebula.org | cmartin at opennebula.org | @OpenNebula<http://twitter.com/opennebula><cmartin at opennebula.org>
>>>>
>>>>
>>>> On Wed, Apr 17, 2013 at 4:15 PM, Preetham Nagaraju <
>>>> preetham.nagaraju at gmail.com> wrote:
>>>>
>>>>> *Hi Sir,*
>>>>>
>>>>> Firstly, i have installed *Opennebula 3.9.80 on Ubuntu 12.04 OS which
>>>>> has KVM hypervisor* in it. I am using this machine as *both Fontend &
>>>>> Host/Node* machine. In this, Opennebula is working fine & the same
>>>>> m/c as node/host is also working fine i.e this host m/c in opennebula is in
>>>>> *"ON"* state.
>>>>>
>>>>> Further i have another host m/c i.e *2nd host m/c which has
>>>>> Ubuntu12.04 OS with XEN hypervisor*.. From the 1st m/c i can ssh
>>>>> passwordless to 2nd m/c & vice-versa and also automount from 1st m/c to 2nd
>>>>> m/c.... This 2nd host m/c is also added successfully to opennebula and it
>>>>> is also in *"ON"* state....
>>>>>
>>>>> *oneadmin at opennebula:~$* *onehost list*
>>>>>
>>>>> ID NAME CLUSTER RVM ALLOCATED_CPU
>>>>> ALLOCATED_MEM STAT
>>>>> 8 opennebula - 0 0 / 200 (0%) 0K / 991.8M
>>>>> (0%) on ----------------- 1st host m/c(KVM)
>>>>> 16 node1 - 0 0 / 200 (0%) 0K / 2G
>>>>> (0%) on ----------------- 2nd host m/c(XEN)
>>>>>
>>>>> After adding the host m/c's, further for creating VM's firstly i
>>>>> imported the ttylinux (for eg.) from "Marketplace" and when it came to
>>>>> "Ready" state, created the "Template".....
>>>>>
>>>>> *oneadmin at opennebula:~$ onetemplate list*
>>>>> ID USER GROUP NAME
>>>>> REGTIME
>>>>> 4 oneadmin oneadmin tty-linux
>>>>> 04/16 11:22:24
>>>>>
>>>>> After creating the template, gave "Instantiate" and selected the
>>>>> created template and gave No. vm's to deploy as 2...
>>>>> VM's got created but the VM in the 2nd host m/c is in *"Fail"* state
>>>>> whereas the VM in the 1st host m/c is in "Running" state....
>>>>>
>>>>> *oneadmin at opennebula:~$ onevm list*
>>>>> ID USER GROUP NAME STAT UCPU UMEM
>>>>> HOST TIME
>>>>> 10 oneadmin oneadmin ttylinux-vm fail 0
>>>>> 0K 0d 00h00 ----------------- 2nd
>>>>> host m/c(XEN)
>>>>> 11 oneadmin oneadmin ttylinux-vm runn 0 0K
>>>>> opennebula 0d 00h00 ----------------- 1st host m/c(KVM)
>>>>>
>>>>> Sir, please guide me where i have done mistake or gone wrong from the
>>>>> above, and help me out to come out from vm "Failed" state in the 2nd host
>>>>> m/c which has XEN hypervisor in it.....
>>>>>
>>>>> Sir, i have also updated the "sudoers" in the opennebula m/c i.e 1st
>>>>> host m/c and also in the 2nd host m/c... with giving all privileges....
>>>>>
>>>>> *%oneadmin ALL=(ALL) NOPASSWD: ALL
>>>>>
>>>>> %xen ALL=(ALL) NOPASSWD: /usr/sbin/xm *
>>>>> **%xen ALL=(ALL) NOPASSWD: /usr/sbin/xentop **
>>>>> *
>>>>> *
>>>>> And also have "uncommented" the drivers line in oned.config file for
>>>>> both KVM & XEN with dummy also.....
>>>>> *
>>>>> *
>>>>> Sir, please find the logs in the attachment.....
>>>>>
>>>>>
>>>>> On Wed, Apr 17, 2013 at 2:55 PM, Carlos Martín Sánchez <
>>>>> cmartin at opennebula.org> wrote:
>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> You may find the reason in the opennebula logs, see
>>>>>> /var/log/one/oned.log and vm-id.log; or in the xen logs in the host.
>>>>>> But if I understood your configuration, you are trying to run a KVM
>>>>>> machine on Xen.
>>>>>>
>>>>>> Regards
>>>>>>
>>>>>> --
>>>>>> Carlos Martín, MSc
>>>>>> Project Engineer
>>>>>> OpenNebula - The Open-source Solution for Data Center Virtualization
>>>>>> www.OpenNebula.org | cmartin at opennebula.org | @OpenNebula<http://twitter.com/opennebula><cmartin at opennebula.org>
>>>>>>
>>>>>>
>>>>>> On Mon, Apr 15, 2013 at 11:26 AM, Preetham Nagaraju <
>>>>>> preetham.nagaraju at gmail.com> wrote:
>>>>>>
>>>>>>> Hi Sir,
>>>>>>>
>>>>>>> Now i have added two host machines to Opennebula. First host m/c is
>>>>>>> the opennebula frontend itself and the other m/c which has Ubuntu 12.04 &
>>>>>>> XEN hypervisor in it.... Both the host's are in "Running" i.e "ON" state...
>>>>>>>
>>>>>>> Then i am trying to create VM in these host m/c's. After uploading
>>>>>>> image & creating template, if i give "Instantiate" and give no. of deploy
>>>>>>> vm as :- 2 , two vm's must be created!!!!!
>>>>>>>
>>>>>>> *2 vm's are creating in two host m/c's* but the *vm in the second
>>>>>>> node* i.e Ubuntu 12.04 with XEN which is other than opennebula
>>>>>>> frontend m/c is going to *"FAILED" state,* but the vm created in
>>>>>>> the opennebula frontend m/c i.e first host, is in "RUNNING" state....
>>>>>>>
>>>>>>> From the frontend m/c i can ssh passwordless to the second m/c and
>>>>>>> vice-versa also successfully....
>>>>>>>
>>>>>>> sir please help me how to get the vm in "RUNNING" state in the 2nd
>>>>>>> m/c...
>>>>>>>
>>>>>>>
>>>>>>> On Thu, Mar 14, 2013 at 11:27 PM, Preetham Nagaraju <
>>>>>>> preetham.nagaraju at gmail.com> wrote:
>>>>>>>
>>>>>>>> for (1) VNC viewer on local pc means on the host machine sir....if
>>>>>>>> it is so then i haven't installed VNC viewer on host machine, at the time
>>>>>>>> of installing openneula i installed noVNC_gems tat's all....
>>>>>>>>
>>>>>>>> for (2), i will run that command after creating vm, but i have
>>>>>>>> doubt that since we are creating the vm from template whether it can store
>>>>>>>> the vm or it will get deleted after the vm is shutdown... that's the
>>>>>>>> behaviour of vm after creating it by template right sir!!!!!
>>>>>>>>
>>>>>>>>
>>>>>>>> On Thu, Mar 14, 2013 at 11:17 PM, Tobias Honacker <
>>>>>>>> t.honacker at googlemail.com> wrote:
>>>>>>>>
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> --> 2. After creating the VM and the OS is installed run sudo
>>>>>>>>> apt-get install acpid on it (VM)
>>>>>>>>> --> 1. did you install any VNC viewer on your local pc?
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Best regards,
>>>>>>>>> Tobias
>>>>>>>>>
>>>>>>>>> Am 14.03.2013 18:28, schrieb Preetham Nagaraju:
>>>>>>>>>
>>>>>>>>> Hi sir,
>>>>>>>>>
>>>>>>>>> i think for my first question (1) i need to make
>>>>>>>>> clear.... Desktop means not the desktop version of Ubuntu OS, now i am able
>>>>>>>>> to access the vm in command line's and not in the GUI mode..... i am able
>>>>>>>>> to host vm, but it is opening in command line mode and not in the gui.....
>>>>>>>>>
>>>>>>>>> and also for the reply by you for (2) "sudo apt-get install
>>>>>>>>> acpid" i need to run this command in the host machine or after creating the
>>>>>>>>> vm i need to run this command....????
>>>>>>>>>
>>>>>>>>> On Thu, Mar 14, 2013 at 10:26 PM, Tobias Honacker <
>>>>>>>>> t.honacker at googlemail.com> wrote:
>>>>>>>>>
>>>>>>>>>> Hi,
>>>>>>>>>>
>>>>>>>>>> --> 1. You have to download Ubuntu Desktop ISO to run Desktop
>>>>>>>>>> after the installation is done
>>>>>>>>>> Never installed any desktop on my servers yet but you can try
>>>>>>>>>> this link [1].
>>>>>>>>>>
>>>>>>>>>> --> 2. Not 100% sure but try to update the template and
>>>>>>>>>> shutdown the vm so changes can take effect. If not deploy a new VM.
>>>>>>>>>> Also install the acpi daemon on your VM:
>>>>>>>>>> sudo apt-get install acpid
>>>>>>>>>>
>>>>>>>>>> This should help.
>>>>>>>>>>
>>>>>>>>>> Best regards,
>>>>>>>>>> Tobias
>>>>>>>>>>
>>>>>>>>>> [1]
>>>>>>>>>> http://www.filiwiese.com/installing-gnome-on-ubuntu-12-04-precise-pangolin/
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Von: Preetham Nagaraju <preetham.nagaraju at gmail.com>
>>>>>>>>>> Datum: Donnerstag, 14. März 2013 17:14
>>>>>>>>>>
>>>>>>>>>> An: Tobias Honacker <t.honacker at googlemail.com>
>>>>>>>>>> Cc: <users at lists.opennebula.org>, <
>>>>>>>>>> users-owner at lists.opennebula.org>
>>>>>>>>>> Betreff: Re: [one-users] Onevm in Failed state
>>>>>>>>>>
>>>>>>>>>> i installed Ubuntu 12.04 OS......
>>>>>>>>>>
>>>>>>>>>> for 2) is it ok now to go to the created template and click
>>>>>>>>>> update properties and edit the features given by you there directly????
>>>>>>>>>>
>>>>>>>>>> On Thu, Mar 14, 2013 at 9:40 PM, Tobias Honacker <
>>>>>>>>>> t.honacker at googlemail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> Hi,
>>>>>>>>>>>
>>>>>>>>>>> --> 1. which OS did you install?
>>>>>>>>>>> --> 2. Try to enable ACPI in the feature section when you create
>>>>>>>>>>> a template or update your template with:
>>>>>>>>>>> FEATURES=[
>>>>>>>>>>> ACPI="yes" ]
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Best regards,
>>>>>>>>>>> Tobias
>>>>>>>>>>>
>>>>>>>>>>> Von: Preetham Nagaraju <preetham.nagaraju at gmail.com>
>>>>>>>>>>> Datum: Donnerstag, 14. März 2013 16:54
>>>>>>>>>>> An: Tobias Honacker <t.honacker at googlemail.com>
>>>>>>>>>>> Cc: <users at lists.opennebula.org>, <
>>>>>>>>>>> users-owner at lists.opennebula.org>
>>>>>>>>>>> Betreff: Re: [one-users] Onevm in Failed state
>>>>>>>>>>>
>>>>>>>>>>> Hi Sir,
>>>>>>>>>>>
>>>>>>>>>>> You were right, it was the bridge problem..... I sorted it
>>>>>>>>>>> out.... Now i am able to create VM successfully... It is in "running"
>>>>>>>>>>> state......
>>>>>>>>>>>
>>>>>>>>>>> Sir after running the vm, we click on vnc to open a new tab of
>>>>>>>>>>> created vm and first it asks for installing OS.... i proceeded with all
>>>>>>>>>>> that and got successfully installed the OS.... But the vm is in
>>>>>>>>>>> *"CLI" mode* and not in the desktop or graphics mode......
>>>>>>>>>>>
>>>>>>>>>>> *Could you please guide:*-
>>>>>>>>>>> 1. how to open the *VM in graphics mode* with the desktop view
>>>>>>>>>>> and not this CLI mode......
>>>>>>>>>>> 2. If we *shutdown the vm not able to start it again.*... i
>>>>>>>>>>> need to cancel it and start instantiate again the template which will give
>>>>>>>>>>> new vm and start installing os again.... how to shutdown created vm and
>>>>>>>>>>> start back again?????
>>>>>>>>>>>
>>>>>>>>>>> On Thu, Mar 14, 2013 at 4:40 PM, Tobias Honacker <
>>>>>>>>>>> t.honacker at googlemail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hi,
>>>>>>>>>>>>
>>>>>>>>>>>> Did u create a bridge named "br0"?
>>>>>>>>>>>> Please provide the output of ifconfig –a
>>>>>>>>>>>>
>>>>>>>>>>>> It could also be a permission problem, follow these guide [1]
>>>>>>>>>>>> and provide us the output of:
>>>>>>>>>>>>
>>>>>>>>>>>> grep -vE '^($|#)' /etc/libvirt/qemu.conf
>>>>>>>>>>>> grep -vE '^($|#)' /etc/libvirt/libvirtd.conf
>>>>>>>>>>>> cat /var/lib/one/var/datastores/0/10/deployment.1
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Best regards,
>>>>>>>>>>>> Tobias
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Von: Preetham Nagaraju <preetham.nagaraju at gmail.com>
>>>>>>>>>>>> Datum: Donnerstag, 14. März 2013 12:01
>>>>>>>>>>>> An: <users at lists.opennebula.org>, <
>>>>>>>>>>>> users-owner at lists.opennebula.org>
>>>>>>>>>>>> Betreff: [one-users] Onevm in Failed state
>>>>>>>>>>>>
>>>>>>>>>>>> Hi
>>>>>>>>>>>>
>>>>>>>>>>>> I am using Opennebula 3.8.3 on Ubuntu with KVM hypervisor
>>>>>>>>>>>> in it.
>>>>>>>>>>>> I added the host successfully, and created the image and
>>>>>>>>>>>> template.
>>>>>>>>>>>>
>>>>>>>>>>>> But the virtual machine starts with pending, prolog , boot and
>>>>>>>>>>>> then goes to failed state......
>>>>>>>>>>>>
>>>>>>>>>>>> Please get me out of this failed state.......
>>>>>>>>>>>>
>>>>>>>>>>>> VM information is as follows:-
>>>>>>>>>>>>
>>>>>>>>>>>> Virtual Machine information - one-10 ID 10 Name one-10
>>>>>>>>>>>> Owner preetham Group users State FAILED LCM State LCM_INIT
>>>>>>>>>>>> Host -- Start time 16:02:14 03/14/2013 Deploy ID -
>>>>>>>>>>>> Permissions
>>>>>>>>>>>> Owner um- Group --- Other --- Monitoring
>>>>>>>>>>>> information Net_TX 0 Net_RX 0 Used Memory 0K Used CPU 0 VNC
>>>>>>>>>>>> Session [image: VNC Disabled]
>>>>>>>>>>>> My Vm template is as follows:-
>>>>>>>>>>>> VM template VCPU 1 NIC
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> MAC 02:00:c0:a8:96:67 NETWORK_ID 1 VLAN NO NETWORK_UNAME
>>>>>>>>>>>> oneadmin BRIDGE br0 NETWORK localhost IP 192.168.150.103
>>>>>>>>>>>>
>>>>>>>>>>>> ERROR
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> TIMESTAMP Thu Mar 14 16:16:41 2013 MESSAGE Error deploying
>>>>>>>>>>>> virtual machine: Could not create domain from
>>>>>>>>>>>> /var/lib/one/var//datastores/0/10/deployment.1
>>>>>>>>>>>>
>>>>>>>>>>>> VMID 10 RAW
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> TYPE kvm
>>>>>>>>>>>>
>>>>>>>>>>>> NAME one-10 DISK
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> 0
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> DATASTORE user_ds TYPE CDROM TARGET hdb SAVE NO IMAGE
>>>>>>>>>>>> cd-Ubuntu-precise DISK_ID 0 DEV_PREFIX hd CLONE YES SOURCE
>>>>>>>>>>>> /var/lib/one/var/datastores/100/c2d97c815b985bece0b710a0675d1bb9
>>>>>>>>>>>> IMAGE_UNAME preetham IMAGE_ID 11 READONLY YES TM_MAD shared
>>>>>>>>>>>> DATASTORE_ID 100
>>>>>>>>>>>>
>>>>>>>>>>>> 1
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> DATASTORE user_ds TYPE FILE TARGET hda SAVE YES
>>>>>>>>>>>> PERSISTENT YES IMAGE Ubuntu-precise DISK_ID 1 DEV_PREFIX hd
>>>>>>>>>>>> CLONE NO SOURCE
>>>>>>>>>>>> /var/lib/one/var/datastores/100/c1e8082f7e34c0cc91254c086f9b72de
>>>>>>>>>>>> IMAGE_UNAME preetham IMAGE_ID 12 READONLY NO TM_MAD shared
>>>>>>>>>>>> DATASTORE_ID 100
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> OS
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> ARCH x86_64 BOOT cdrom
>>>>>>>>>>>>
>>>>>>>>>>>> MEMORY 1024 CPU 1 TEMPLATE_ID 11 GRAPHICS
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> TYPE vnc PORT 5910 KEYMAP es
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> My vm log is as follows:-
>>>>>>>>>>>>
>>>>>>>>>>>> Thu Mar 14 16:02:37 2013 [DiM][I]: New VM state is ACTIVE.
>>>>>>>>>>>> Thu Mar 14 16:02:37 2013 [LCM][I]: New VM state is PROLOG.
>>>>>>>>>>>> Thu Mar 14 16:02:37 2013 [VM][I]: Virtual Machine has no context
>>>>>>>>>>>> Thu Mar 14 16:03:08 2013 [TM][I]: clone: Cloning /var/lib/one/var/datastores/100/c2d97c815b985bece0b710a0675d1bb9 in opennebula:/var/lib/one/var//datastores/0/10/disk.0
>>>>>>>>>>>> Thu Mar 14 16:03:08 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>> Thu Mar 14 16:03:09 2013 [TM][I]: ln: Linking /var/lib/one/var/datastores/100/c1e8082f7e34c0cc91254c086f9b72de in opennebula:/var/lib/one/var//datastores/0/10/disk.1
>>>>>>>>>>>> Thu Mar 14 16:03:09 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>> Thu Mar 14 16:03:09 2013 [LCM][I]: New VM state is BOOT
>>>>>>>>>>>> Thu Mar 14 16:03:09 2013 [VMM][I]: Generating deployment file: /var/lib/one/var/vms/10/deployment.0
>>>>>>>>>>>> Thu Mar 14 16:03:10 2013 [VMM][I]: ExitCode: 0
>>>>>>>>>>>> Thu Mar 14 16:03:10 2013 [VMM][I]: Successfully execute network driver operation: pre.
>>>>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: Command execution fail: cat << EOT | /var/tmp/one/vmm/kvm/deploy /var/lib/one/var//datastores/0/10/deployment.0 opennebula 10 opennebula
>>>>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: error: Failed to create domain from /var/lib/one/var//datastores/0/10/deployment.0
>>>>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: error: Cannot get interface MTU on 'br0': No such deviceThu Mar 14 16:03:13 2013 [VMM][E]: Could not create domain from /var/lib/one/var//datastores/0/10/deployment.0
>>>>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: ExitCode: 255
>>>>>>>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: Failed to execute virtualization driver operation: deploy.Thu Mar 14 16:03:13 2013 [VMM][E]: Error deploying virtual machine: Could not create domain from /var/lib/one/var//datastores/0/10/deployment.0
>>>>>>>>>>>> Thu Mar 14 16:03:13 2013 [DiM][I]: New VM state is FAILED
>>>>>>>>>>>> Thu Mar 14 16:16:04 2013 [DiM][I]: New VM state is CLEANUP.
>>>>>>>>>>>> Thu Mar 14 16:16:04 2013 [TM][I]: delete: Deleting /var/lib/one/var/datastores/0/10/disk.0
>>>>>>>>>>>> Thu Mar 14 16:16:04 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>> Thu Mar 14 16:16:04 2013 [TM][I]: delete: Deleting /var/lib/one/var/datastores/0/10/disk.1
>>>>>>>>>>>> Thu Mar 14 16:16:04 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>> Thu Mar 14 16:16:05 2013 [TM][I]: delete: Deleting /var/lib/one/var/datastores/0/10
>>>>>>>>>>>> Thu Mar 14 16:16:05 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>> Thu Mar 14 16:16:05 2013 [DiM][I]: New VM state is PENDING
>>>>>>>>>>>> Thu Mar 14 16:16:10 2013 [DiM][I]: New VM state is ACTIVE.
>>>>>>>>>>>> Thu Mar 14 16:16:10 2013 [LCM][I]: New VM state is PROLOG.
>>>>>>>>>>>> Thu Mar 14 16:16:10 2013 [VM][I]: Virtual Machine has no context
>>>>>>>>>>>> Thu Mar 14 16:16:36 2013 [TM][I]: clone: Cloning /var/lib/one/var/datastores/100/c2d97c815b985bece0b710a0675d1bb9 in opennebula:/var/lib/one/var//datastores/0/10/disk.0
>>>>>>>>>>>> Thu Mar 14 16:16:36 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>> Thu Mar 14 16:16:38 2013 [TM][I]: ln: Linking /var/lib/one/var/datastores/100/c1e8082f7e34c0cc91254c086f9b72de in opennebula:/var/lib/one/var//datastores/0/10/disk.1
>>>>>>>>>>>> Thu Mar 14 16:16:38 2013 [TM][I]: ExitCode: 0
>>>>>>>>>>>> Thu Mar 14 16:16:38 2013 [LCM][I]: New VM state is BOOT
>>>>>>>>>>>> Thu Mar 14 16:16:38 2013 [VMM][I]: Generating deployment file: /var/lib/one/var/vms/10/deployment.1
>>>>>>>>>>>> Thu Mar 14 16:16:39 2013 [VMM][I]: ExitCode: 0
>>>>>>>>>>>> Thu Mar 14 16:16:39 2013 [VMM][I]: Successfully execute network driver operation: pre.
>>>>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: Command execution fail: cat << EOT | /var/tmp/one/vmm/kvm/deploy /var/lib/one/var//datastores/0/10/deployment.1 opennebula 10 opennebula
>>>>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: error: Failed to create domain from /var/lib/one/var//datastores/0/10/deployment.1
>>>>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: error: Cannot get interface MTU on 'br0': No such deviceThu Mar 14 16:16:41 2013 [VMM][E]: Could not create domain from /var/lib/one/var//datastores/0/10/deployment.1
>>>>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: ExitCode: 255
>>>>>>>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: Failed to execute virtualization driver operation: deploy.Thu Mar 14 16:16:41 2013 [VMM][E]: Error deploying virtual machine: Could not create domain from /var/lib/one/var//datastores/0/10/deployment.1
>>>>>>>>>>>> Thu Mar 14 16:16:41 2013 [DiM][I]: New VM state is FAILED
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> *Regards,***
>>>>>>>>>>>>
>>>>>>>>>>>> *Preetham. N*
>>>>>>>>>>>>
>>>>>>>>>>>> *
>>>>>>>>>>>> *
>>>>>>>>>>>> *
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> *
>>>>>>>>>>>> _______________________________________________ Users
>>>>>>>>>>>> mailing list Users at lists.opennebula.org
>>>>>>>>>>>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>>
>>>>>>>>>>> *?** Regards,***
>>>>>>>>>>>
>>>>>>>>>>> *Preetham. N*
>>>>>>>>>>>
>>>>>>>>>>> *9945072638*
>>>>>>>>>>> *
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> *
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>>
>>>>>>>>>> *?** Regards,***
>>>>>>>>>>
>>>>>>>>>> *Preetham. N*
>>>>>>>>>>
>>>>>>>>>> *9945072638*
>>>>>>>>>> *
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> *
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>>
>>>>>>>>> *?** Regards,***
>>>>>>>>>
>>>>>>>>> *Preetham. N*
>>>>>>>>>
>>>>>>>>> *9945072638*
>>>>>>>>> *
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> *
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>>
>>>>>>>> *?** Regards,***
>>>>>>>>
>>>>>>>> *Preetham. N*
>>>>>>>>
>>>>>>>> *9945072638*
>>>>>>>> *
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> *
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>>
>>>>>>> *?** Regards,***
>>>>>>>
>>>>>>> *Preetham. N*
>>>>>>>
>>>>>>> *9945072638*
>>>>>>> *
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> *
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Users mailing list
>>>>>>> Users at lists.opennebula.org
>>>>>>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>>
>>>>> *?** Regards,***
>>>>>
>>>>> *Preetham. N*
>>>>>
>>>>> *9945072638*
>>>>> *
>>>>>
>>>>>
>>>>>
>>>>> *
>>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>>
>>> *?** Regards,***
>>>
>>> *Preetham. N*
>>>
>>> *9945072638*
>>> *
>>>
>>>
>>>
>>> *
>>>
>>
>>
>
>
> --
>
> *?** Regards,***
>
> *Preetham. N*
>
> *9945072638*
> *
>
>
>
> *
>
--
*?** Regards,***
*Preetham. N*
*9945072638*
*
*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20130418/0a7aea09/attachment-0002.htm>
More information about the Users
mailing list