[one-users] Onevm in Failed state
Carlos Martín Sánchez
cmartin at opennebula.org
Wed Apr 17 02:25:29 PDT 2013
Hi,
You may find the reason in the opennebula logs, see /var/log/one/oned.log
and vm-id.log; or in the xen logs in the host.
But if I understood your configuration, you are trying to run a KVM machine
on Xen.
Regards
--
Carlos Martín, MSc
Project Engineer
OpenNebula - The Open-source Solution for Data Center Virtualization
www.OpenNebula.org | cmartin at opennebula.org |
@OpenNebula<http://twitter.com/opennebula><cmartin at opennebula.org>
On Mon, Apr 15, 2013 at 11:26 AM, Preetham Nagaraju <
preetham.nagaraju at gmail.com> wrote:
> Hi Sir,
>
> Now i have added two host machines to Opennebula. First host m/c is the
> opennebula frontend itself and the other m/c which has Ubuntu 12.04 & XEN
> hypervisor in it.... Both the host's are in "Running" i.e "ON" state...
>
> Then i am trying to create VM in these host m/c's. After uploading image &
> creating template, if i give "Instantiate" and give no. of deploy vm as :-
> 2 , two vm's must be created!!!!!
>
> *2 vm's are creating in two host m/c's* but the *vm in the second node*i.e Ubuntu 12.04 with XEN which is other than opennebula frontend m/c is
> going to *"FAILED" state,* but the vm created in the opennebula frontend
> m/c i.e first host, is in "RUNNING" state....
>
> From the frontend m/c i can ssh passwordless to the second m/c and
> vice-versa also successfully....
>
> sir please help me how to get the vm in "RUNNING" state in the 2nd m/c...
>
>
> On Thu, Mar 14, 2013 at 11:27 PM, Preetham Nagaraju <
> preetham.nagaraju at gmail.com> wrote:
>
>> for (1) VNC viewer on local pc means on the host machine sir....if it is
>> so then i haven't installed VNC viewer on host machine, at the time of
>> installing openneula i installed noVNC_gems tat's all....
>>
>> for (2), i will run that command after creating vm, but i have doubt that
>> since we are creating the vm from template whether it can store the vm or
>> it will get deleted after the vm is shutdown... that's the behaviour of vm
>> after creating it by template right sir!!!!!
>>
>>
>> On Thu, Mar 14, 2013 at 11:17 PM, Tobias Honacker <
>> t.honacker at googlemail.com> wrote:
>>
>>> Hi,
>>>
>>> --> 2. After creating the VM and the OS is installed run sudo apt-get
>>> install acpid on it (VM)
>>> --> 1. did you install any VNC viewer on your local pc?
>>>
>>>
>>> Best regards,
>>> Tobias
>>>
>>> Am 14.03.2013 18:28, schrieb Preetham Nagaraju:
>>>
>>> Hi sir,
>>>
>>> i think for my first question (1) i need to make clear....
>>> Desktop means not the desktop version of Ubuntu OS, now i am able to access
>>> the vm in command line's and not in the GUI mode..... i am able to host vm,
>>> but it is opening in command line mode and not in the gui.....
>>>
>>> and also for the reply by you for (2) "sudo apt-get install acpid" i
>>> need to run this command in the host machine or after creating the vm i
>>> need to run this command....????
>>>
>>> On Thu, Mar 14, 2013 at 10:26 PM, Tobias Honacker <
>>> t.honacker at googlemail.com> wrote:
>>>
>>>> Hi,
>>>>
>>>> --> 1. You have to download Ubuntu Desktop ISO to run Desktop after
>>>> the installation is done
>>>> Never installed any desktop on my servers yet but you can try this link
>>>> [1].
>>>>
>>>> --> 2. Not 100% sure but try to update the template and shutdown the
>>>> vm so changes can take effect. If not deploy a new VM.
>>>> Also install the acpi daemon on your VM:
>>>> sudo apt-get install acpid
>>>>
>>>> This should help.
>>>>
>>>> Best regards,
>>>> Tobias
>>>>
>>>> [1]
>>>> http://www.filiwiese.com/installing-gnome-on-ubuntu-12-04-precise-pangolin/
>>>>
>>>>
>>>> Von: Preetham Nagaraju <preetham.nagaraju at gmail.com>
>>>> Datum: Donnerstag, 14. März 2013 17:14
>>>>
>>>> An: Tobias Honacker <t.honacker at googlemail.com>
>>>> Cc: <users at lists.opennebula.org>, <users-owner at lists.opennebula.org>
>>>> Betreff: Re: [one-users] Onevm in Failed state
>>>>
>>>> i installed Ubuntu 12.04 OS......
>>>>
>>>> for 2) is it ok now to go to the created template and click update
>>>> properties and edit the features given by you there directly????
>>>>
>>>> On Thu, Mar 14, 2013 at 9:40 PM, Tobias Honacker <
>>>> t.honacker at googlemail.com> wrote:
>>>>
>>>>> Hi,
>>>>>
>>>>> --> 1. which OS did you install?
>>>>> --> 2. Try to enable ACPI in the feature section when you create a
>>>>> template or update your template with:
>>>>> FEATURES=[
>>>>> ACPI="yes" ]
>>>>>
>>>>>
>>>>> Best regards,
>>>>> Tobias
>>>>>
>>>>> Von: Preetham Nagaraju <preetham.nagaraju at gmail.com>
>>>>> Datum: Donnerstag, 14. März 2013 16:54
>>>>> An: Tobias Honacker <t.honacker at googlemail.com>
>>>>> Cc: <users at lists.opennebula.org>, <users-owner at lists.opennebula.org>
>>>>> Betreff: Re: [one-users] Onevm in Failed state
>>>>>
>>>>> Hi Sir,
>>>>>
>>>>> You were right, it was the bridge problem..... I sorted it out....
>>>>> Now i am able to create VM successfully... It is in "running" state......
>>>>>
>>>>> Sir after running the vm, we click on vnc to open a new tab of
>>>>> created vm and first it asks for installing OS.... i proceeded with all
>>>>> that and got successfully installed the OS.... But the vm is in *"CLI"
>>>>> mode* and not in the desktop or graphics mode......
>>>>>
>>>>> *Could you please guide:*-
>>>>> 1. how to open the *VM in graphics mode* with the desktop view and notthis CLI mode......
>>>>> 2. If we *shutdown the vm not able to start it again.*... i need
>>>>> to cancel it and start instantiate again the template which will give new
>>>>> vm and start installing os again.... how to shutdown created vm and start
>>>>> back again?????
>>>>>
>>>>> On Thu, Mar 14, 2013 at 4:40 PM, Tobias Honacker <
>>>>> t.honacker at googlemail.com> wrote:
>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> Did u create a bridge named "br0"?
>>>>>> Please provide the output of ifconfig –a
>>>>>>
>>>>>> It could also be a permission problem, follow these guide [1] and
>>>>>> provide us the output of:
>>>>>>
>>>>>> grep -vE '^($|#)' /etc/libvirt/qemu.conf
>>>>>> grep -vE '^($|#)' /etc/libvirt/libvirtd.conf
>>>>>> cat /var/lib/one/var/datastores/0/10/deployment.1
>>>>>>
>>>>>>
>>>>>>
>>>>>> Best regards,
>>>>>> Tobias
>>>>>>
>>>>>>
>>>>>> Von: Preetham Nagaraju <preetham.nagaraju at gmail.com>
>>>>>> Datum: Donnerstag, 14. März 2013 12:01
>>>>>> An: <users at lists.opennebula.org>, <users-owner at lists.opennebula.org>
>>>>>> Betreff: [one-users] Onevm in Failed state
>>>>>>
>>>>>> Hi
>>>>>>
>>>>>> I am using Opennebula 3.8.3 on Ubuntu with KVM hypervisor in it.
>>>>>> I added the host successfully, and created the image and template.
>>>>>>
>>>>>> But the virtual machine starts with pending, prolog , boot and then
>>>>>> goes to failed state......
>>>>>>
>>>>>> Please get me out of this failed state.......
>>>>>>
>>>>>> VM information is as follows:-
>>>>>>
>>>>>> Virtual Machine information - one-10 ID 10 Name one-10 Owner
>>>>>> preetham Group users State FAILED LCM State LCM_INIT Host -- Start
>>>>>> time 16:02:14 03/14/2013 Deploy ID - Permissions
>>>>>> Owner um- Group --- Other --- Monitoring
>>>>>> information Net_TX 0 Net_RX 0 Used Memory 0K Used CPU 0 VNC
>>>>>> Session [image: VNC Disabled]
>>>>>> My Vm template is as follows:-
>>>>>> VM template VCPU 1 NIC
>>>>>>
>>>>>>
>>>>>> MAC 02:00:c0:a8:96:67 NETWORK_ID 1 VLAN NO NETWORK_UNAME
>>>>>> oneadmin BRIDGE br0 NETWORK localhost IP 192.168.150.103
>>>>>>
>>>>>> ERROR
>>>>>>
>>>>>>
>>>>>> TIMESTAMP Thu Mar 14 16:16:41 2013 MESSAGE Error deploying
>>>>>> virtual machine: Could not create domain from
>>>>>> /var/lib/one/var//datastores/0/10/deployment.1
>>>>>>
>>>>>> VMID 10 RAW
>>>>>>
>>>>>>
>>>>>> TYPE kvm
>>>>>>
>>>>>> NAME one-10 DISK
>>>>>>
>>>>>>
>>>>>> 0
>>>>>>
>>>>>>
>>>>>> DATASTORE user_ds TYPE CDROM TARGET hdb SAVE NO IMAGE
>>>>>> cd-Ubuntu-precise DISK_ID 0 DEV_PREFIX hd CLONE YES SOURCE
>>>>>> /var/lib/one/var/datastores/100/c2d97c815b985bece0b710a0675d1bb9
>>>>>> IMAGE_UNAME preetham IMAGE_ID 11 READONLY YES TM_MAD shared
>>>>>> DATASTORE_ID 100
>>>>>>
>>>>>> 1
>>>>>>
>>>>>>
>>>>>> DATASTORE user_ds TYPE FILE TARGET hda SAVE YES PERSISTENT YES
>>>>>> IMAGE Ubuntu-precise DISK_ID 1 DEV_PREFIX hd CLONE NO SOURCE
>>>>>> /var/lib/one/var/datastores/100/c1e8082f7e34c0cc91254c086f9b72de
>>>>>> IMAGE_UNAME preetham IMAGE_ID 12 READONLY NO TM_MAD shared
>>>>>> DATASTORE_ID 100
>>>>>>
>>>>>>
>>>>>>
>>>>>> OS
>>>>>>
>>>>>>
>>>>>> ARCH x86_64 BOOT cdrom
>>>>>>
>>>>>> MEMORY 1024 CPU 1 TEMPLATE_ID 11 GRAPHICS
>>>>>>
>>>>>>
>>>>>> TYPE vnc PORT 5910 KEYMAP es
>>>>>>
>>>>>>
>>>>>> My vm log is as follows:-
>>>>>>
>>>>>> Thu Mar 14 16:02:37 2013 [DiM][I]: New VM state is ACTIVE.
>>>>>> Thu Mar 14 16:02:37 2013 [LCM][I]: New VM state is PROLOG.
>>>>>> Thu Mar 14 16:02:37 2013 [VM][I]: Virtual Machine has no context
>>>>>> Thu Mar 14 16:03:08 2013 [TM][I]: clone: Cloning /var/lib/one/var/datastores/100/c2d97c815b985bece0b710a0675d1bb9 in opennebula:/var/lib/one/var//datastores/0/10/disk.0
>>>>>> Thu Mar 14 16:03:08 2013 [TM][I]: ExitCode: 0
>>>>>> Thu Mar 14 16:03:09 2013 [TM][I]: ln: Linking /var/lib/one/var/datastores/100/c1e8082f7e34c0cc91254c086f9b72de in opennebula:/var/lib/one/var//datastores/0/10/disk.1
>>>>>> Thu Mar 14 16:03:09 2013 [TM][I]: ExitCode: 0
>>>>>> Thu Mar 14 16:03:09 2013 [LCM][I]: New VM state is BOOT
>>>>>> Thu Mar 14 16:03:09 2013 [VMM][I]: Generating deployment file: /var/lib/one/var/vms/10/deployment.0
>>>>>> Thu Mar 14 16:03:10 2013 [VMM][I]: ExitCode: 0
>>>>>> Thu Mar 14 16:03:10 2013 [VMM][I]: Successfully execute network driver operation: pre.
>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: Command execution fail: cat << EOT | /var/tmp/one/vmm/kvm/deploy /var/lib/one/var//datastores/0/10/deployment.0 opennebula 10 opennebula
>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: error: Failed to create domain from /var/lib/one/var//datastores/0/10/deployment.0
>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: error: Cannot get interface MTU on 'br0': No such deviceThu Mar 14 16:03:13 2013 [VMM][E]: Could not create domain from /var/lib/one/var//datastores/0/10/deployment.0
>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: ExitCode: 255
>>>>>> Thu Mar 14 16:03:13 2013 [VMM][I]: Failed to execute virtualization driver operation: deploy.Thu Mar 14 16:03:13 2013 [VMM][E]: Error deploying virtual machine: Could not create domain from /var/lib/one/var//datastores/0/10/deployment.0
>>>>>> Thu Mar 14 16:03:13 2013 [DiM][I]: New VM state is FAILED
>>>>>> Thu Mar 14 16:16:04 2013 [DiM][I]: New VM state is CLEANUP.
>>>>>> Thu Mar 14 16:16:04 2013 [TM][I]: delete: Deleting /var/lib/one/var/datastores/0/10/disk.0
>>>>>> Thu Mar 14 16:16:04 2013 [TM][I]: ExitCode: 0
>>>>>> Thu Mar 14 16:16:04 2013 [TM][I]: delete: Deleting /var/lib/one/var/datastores/0/10/disk.1
>>>>>> Thu Mar 14 16:16:04 2013 [TM][I]: ExitCode: 0
>>>>>> Thu Mar 14 16:16:05 2013 [TM][I]: delete: Deleting /var/lib/one/var/datastores/0/10
>>>>>> Thu Mar 14 16:16:05 2013 [TM][I]: ExitCode: 0
>>>>>> Thu Mar 14 16:16:05 2013 [DiM][I]: New VM state is PENDING
>>>>>> Thu Mar 14 16:16:10 2013 [DiM][I]: New VM state is ACTIVE.
>>>>>> Thu Mar 14 16:16:10 2013 [LCM][I]: New VM state is PROLOG.
>>>>>> Thu Mar 14 16:16:10 2013 [VM][I]: Virtual Machine has no context
>>>>>> Thu Mar 14 16:16:36 2013 [TM][I]: clone: Cloning /var/lib/one/var/datastores/100/c2d97c815b985bece0b710a0675d1bb9 in opennebula:/var/lib/one/var//datastores/0/10/disk.0
>>>>>> Thu Mar 14 16:16:36 2013 [TM][I]: ExitCode: 0
>>>>>> Thu Mar 14 16:16:38 2013 [TM][I]: ln: Linking /var/lib/one/var/datastores/100/c1e8082f7e34c0cc91254c086f9b72de in opennebula:/var/lib/one/var//datastores/0/10/disk.1
>>>>>> Thu Mar 14 16:16:38 2013 [TM][I]: ExitCode: 0
>>>>>> Thu Mar 14 16:16:38 2013 [LCM][I]: New VM state is BOOT
>>>>>> Thu Mar 14 16:16:38 2013 [VMM][I]: Generating deployment file: /var/lib/one/var/vms/10/deployment.1
>>>>>> Thu Mar 14 16:16:39 2013 [VMM][I]: ExitCode: 0
>>>>>> Thu Mar 14 16:16:39 2013 [VMM][I]: Successfully execute network driver operation: pre.
>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: Command execution fail: cat << EOT | /var/tmp/one/vmm/kvm/deploy /var/lib/one/var//datastores/0/10/deployment.1 opennebula 10 opennebula
>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: error: Failed to create domain from /var/lib/one/var//datastores/0/10/deployment.1
>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: error: Cannot get interface MTU on 'br0': No such deviceThu Mar 14 16:16:41 2013 [VMM][E]: Could not create domain from /var/lib/one/var//datastores/0/10/deployment.1
>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: ExitCode: 255
>>>>>> Thu Mar 14 16:16:41 2013 [VMM][I]: Failed to execute virtualization driver operation: deploy.Thu Mar 14 16:16:41 2013 [VMM][E]: Error deploying virtual machine: Could not create domain from /var/lib/one/var//datastores/0/10/deployment.1
>>>>>> Thu Mar 14 16:16:41 2013 [DiM][I]: New VM state is FAILED
>>>>>>
>>>>>>
>>>>>> *Regards,***
>>>>>>
>>>>>> *Preetham. N*
>>>>>>
>>>>>> *
>>>>>> *
>>>>>> *
>>>>>>
>>>>>>
>>>>>>
>>>>>> *
>>>>>> _______________________________________________ Users mailing list
>>>>>> Users at lists.opennebula.org
>>>>>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>>
>>>>> *?** Regards,***
>>>>>
>>>>> *Preetham. N*
>>>>>
>>>>> *9945072638*
>>>>> *
>>>>>
>>>>>
>>>>>
>>>>> *
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>>
>>>> *?** Regards,***
>>>>
>>>> *Preetham. N*
>>>>
>>>> *9945072638*
>>>> *
>>>>
>>>>
>>>>
>>>> *
>>>>
>>>
>>>
>>>
>>> --
>>>
>>> *?** Regards,***
>>>
>>> *Preetham. N*
>>>
>>> *9945072638*
>>> *
>>>
>>>
>>>
>>> *
>>>
>>>
>>>
>>
>>
>> --
>>
>> *?** Regards,***
>>
>> *Preetham. N*
>>
>> *9945072638*
>> *
>>
>>
>>
>> *
>>
>
>
>
> --
>
> *?** Regards,***
>
> *Preetham. N*
>
> *9945072638*
> *
>
>
>
> *
>
> _______________________________________________
> Users mailing list
> Users at lists.opennebula.org
> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20130417/bffe66ed/attachment-0002.htm>
More information about the Users
mailing list