[one-users] Unable to create VM

atal sharifi zaland9 at gmail.com
Sat Apr 13 19:28:57 PDT 2013 

Hi
is there any one could help me i am going to install open nebula to make
storage as service for clients i am doing this as a project.
i have done the installation same like this link from YouTube
http://www.youtube.com/watch?v=1DVm86YFPgk at the end of this video
on the browser he types in localhost9698 then it as for id and password so
now i am not sure what password and user name is asking about and i am not
sure that i am doing the right thing for installing the cloud environment
any one could help that will be great guys thanks


On Sat, Apr 13, 2013 at 10:20 PM, Anant Agarwal <anantinvent at gmail.com>wrote:

> Hi,
>
> These parameters were not configured, but after configuring them
> as mentioned status of hosts in onehost list changes to Err.
> In one of the machine i have set
> user=oneadmin,
> group=oneadmin,
> dynamic_ownership=0
>
> for this machine host statues is Err and in oned.log it shows this:
> Sat Apr 13 15:38:02 2013 [InM][I]: Monitoring host anant-Inspiron-N5010 (2)
> Sat Apr 13 15:38:02 2013 [InM][I]: Command execution fail: 'if [ -x
> "/var/tmp/one/im/run_probes" ]; then /var/tmp/one/im/run_probes kvm 2
> anant-Inspiron-N5010; else                              exit 42; fi'
> Sat Apr 13 15:38:02 2013 [InM][I]: error: Failed to connect socket to
> '/var/run/libvirt/libvirt-sock': No such file or directory
> Sat Apr 13 15:38:02 2013 [InM][I]: error: failed to connect to the
> hypervisor
> Sat Apr 13 15:38:02 2013 [InM][E]: Error executing kvm.rb
> Sat Apr 13 15:38:02 2013 [InM][I]: ExitCode: 255
> Sat Apr 13 15:38:02 2013 [InM][E]: Error monitoring host 2 : MONITOR
> FAILURE 2 Error executing kvm.rb
>
> To me it seems libvirt does not start if i change user to oneadmin.
> Thanks,
>
>
>
> On Wed, Apr 10, 2013 at 3:33 PM, Javier Fontan <jfontan at opennebula.org>wrote:
>
>> Have you configured qemu as stated in the documentation [1]? These
>> parameters in /etc/libvirt/qemu.conf:
>>
>> user = "oneadmin"
>> group = "oneadmin"
>> dynamic_ownership = 0
>>
>>
>> [1] http://opennebula.org/documentation:rel3.8:kvmg#kvm_configuration
>>
>> On Tue, Apr 9, 2013 at 8:03 PM, Anant Agarwal <anantinvent at gmail.com>
>> wrote:
>> > Hi,
>> >
>> > on checking the permissions of /var/lib/one/var/datastores/0/12/disk.0
>>  its
>> > shows the owner and group both as root and the user oneadmin belongs to
>> > group root. So i think that should not be problem. But the group has
>> only
>> > read permission of the file. Can that be the problem? if yes then how to
>> > change the  permission, i tried doing it manually but then everytime i
>> > create a new VM this file is created with same old permissions. Any
>> help?
>> >
>> > Thanks,
>> >
>> >
>> > On Tue, Apr 9, 2013 at 1:50 AM, Alexandre Bezroutchko <abb at gremwell.com
>> >
>> > wrote:
>> >>
>> >> Hi,
>> >>
>> >> I wonder if "permission denied" error can be a cause of your problem.
>> Have
>> >> you investigated it?
>> >>
>> >>
>> >> Tue Apr  9 00:50:33 2013 [VMM][D]: Message received: LOG I 12 error:
>> >> internal error process exited while connecting to monitor: kvm: -drive
>> >>
>> file=/var/lib/one/var/datastores/0/12/disk.0,if=none,id=drive-ide0-0-0,format=qcow2:
>> >> could not open disk image /var/lib/one/var/datastores/0/12/disk.0:
>> >> Permission denied
>> >>
>> >> Best regards,
>> >> Alex
>> >>
>> >>
>> >> On 04/08/2013 09:42 PM, Anant Agarwal wrote:
>> >>
>> >> HI,  I am unable to create VM,
>> >>
>> >> This is the content of oned.log
>> >>
>> >> Tue Apr  9 00:50:26 2013 [TM][D]: Message received: LOG I 12 clone:
>> >> Cloning ../../win-xp-2.qcow2 in
>> >> anant-Inspiron-N5010:/var/lib/one/var/datastores/0/12/disk.0
>> >> Tue Apr  9 00:50:26 2013 [TM][D]: Message received: LOG I 12 ExitCode:
>> 0
>> >> Tue Apr  9 00:50:28 2013 [TM][D]: Message received: LOG I 12 context:
>> >> Generating context block device at
>> >> anant-Inspiron-N5010:/var/lib/one/var/datastores/0/12/disk.1
>> >> Tue Apr  9 00:50:28 2013 [TM][D]: Message received: LOG I 12 ExitCode:
>> 0
>> >> Tue Apr  9 00:50:28 2013 [TM][D]: Message received: TRANSFER SUCCESS
>> 12 -
>> >> Tue Apr  9 00:50:29 2013 [VMM][D]: Message received: LOG I 12
>> ExitCode: 0
>> >> Tue Apr  9 00:50:29 2013 [VMM][D]: Message received: LOG I 12
>> Successfully
>> >> execute network driver operation: pre.
>> >> Tue Apr  9 00:50:33 2013 [VMM][D]: Message received: LOG I 12 Command
>> >> execution fail: cat << EOT | /var/tmp/one/vmm/kvm/deploy
>> >> /var/lib/one/var/datastores/0/12/deployment.0 anant-Inspiron-N5010 12
>> >> anant-Inspiron-N5010
>> >> Tue Apr  9 00:50:33 2013 [VMM][D]: Message received: LOG I 12 error:
>> >> Failed to create domain from
>> /var/lib/one/var/datastores/0/12/deployment.0
>> >> Tue Apr  9 00:50:33 2013 [VMM][D]: Message received: LOG I 12 error:
>> >> internal error process exited while connecting to monitor: kvm: -drive
>> >>
>> file=/var/lib/one/var/datastores/0/12/disk.0,if=none,id=drive-ide0-0-0,format=qcow2:
>> >> could not open disk image /var/lib/one/var/datastores/0/12/disk.0:
>> >> Permission denied
>> >> Tue Apr  9 00:50:33 2013 [VMM][D]: Message received: LOG I 12
>> >> Tue Apr  9 00:50:33 2013 [VMM][D]: Message received: LOG E 12 Could not
>> >> create domain from /var/lib/one/var/datastores/0/12/deployment.0
>> >> Tue Apr  9 00:50:33 2013 [VMM][D]: Message received: LOG I 12 ExitCode:
>> >> 255
>> >> Tue Apr  9 00:50:33 2013 [VMM][D]: Message received: LOG I 12 Failed to
>> >> execute virtualization driver operation: deploy.
>> >> Tue Apr  9 00:50:33 2013 [VMM][D]: Message received: DEPLOY FAILURE 12
>> >> Could not create domain from
>> /var/lib/one/var/datastores/0/12/deployment.0
>> >>
>> >>
>> >>
>> >> This is the config file
>> >> AUTH_MAD=ARGUMENTS=--authn
>> >> ssh,x509,ldap,server_cipher,server_x509,EXECUTABLE=one_auth_mad
>> >> DATASTORE_LOCATION=/var/lib/one/var/datastores
>> >> DATASTORE_MAD=ARGUMENTS=-t 15 -d
>> fs,vmware,iscsi,EXECUTABLE=one_datastore
>> >>
>> >>
>> DB=BACKEND=mysql,DB_NAME=opennebula,PASSWD=oneadmin,PORT=0,SERVER=localhost,USER=oneadmin
>> >> DEBUG_LEVEL=3
>> >> DEFAULT_DEVICE_PREFIX=hd
>> >> DEFAULT_IMAGE_TYPE=OS
>> >> ENABLE_OTHER_PERMISSIONS=YES
>> >> HM_MAD=EXECUTABLE=one_hm
>> >> HOST_MONITORING_INTERVAL=600
>> >> HOST_PER_INTERVAL=15
>> >> IMAGE_RESTRICTED_ATTR=SOURCE
>> >> IM_MAD=ARGUMENTS=-r 0 -t 15 kvm,EXECUTABLE=one_im_ssh,NAME=im_kvm
>> >> MAC_PREFIX=02:00
>> >> MANAGER_TIMER=15
>> >> NETWORK_SIZE=254
>> >> PORT=2633
>> >> SCRIPTS_REMOTE_DIR=/var/tmp/one
>> >> SESSION_EXPIRATION_TIME=900
>> >> TM_MAD=ARGUMENTS=-t 15 -d
>> >> dummy,shared,qcow2,ssh,vmware,iscsi,EXECUTABLE=one_tm
>> >> VM_MAD=ARGUMENTS=-t 15 -r 0
>> >>
>> kvm,DEFAULT=vmm_exec/vmm_exec_kvm.conf,EXECUTABLE=one_vmm_exec,NAME=vmm_kvm,TYPE=kvm
>> >> VM_PER_INTERVAL=5
>> >> VM_POLLING_INTERVAL=600
>> >> VM_RESTRICTED_ATTR=CONTEXT/FILES
>> >> VM_RESTRICTED_ATTR=DISK/SOURCE
>> >> VM_RESTRICTED_ATTR=NIC/MAC
>> >> VM_RESTRICTED_ATTR=NIC/VLAN_ID
>> >> VM_RESTRICTED_ATTR=RANK
>> >> VNC_BASE_PORT=5900
>> >>
>> >> Initially the datastore path generated was /var/lib/one/var//datastore
>> but
>> >> then i somehow fixed this problem and it generates the correct path
>> now, but
>> >> still VM is not getting created.
>> >>
>> >> Thanks.
>> >>
>> >>
>> >> _______________________________________________
>> >> Users mailing list
>> >> Users at lists.opennebula.org
>> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >>
>> >>
>> >>
>> >> _______________________________________________
>> >> Users mailing list
>> >> Users at lists.opennebula.org
>> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >>
>> >
>> >
>> > _______________________________________________
>> > Users mailing list
>> > Users at lists.opennebula.org
>> > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>> >
>>
>>
>>
>> --
>> Javier Fontán Muiños
>> Project Engineer
>> OpenNebula - The Open Source Toolkit for Data Center Virtualization
>> www.OpenNebula.org | jfontan at opennebula.org | @OpenNebula
>>
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opennebula.org
> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20130414/963a9bfd/attachment-0001.htm>

More information about the Users mailing list