[one-users] help: with 8021q driver, network configuration won't work, after host reboot (???)
Andreas Calvo Gómez
andreas.calvo at scytl.com
Fri Nov 30 08:11:58 PST 2012
Opennebula recreates all necessary interfaces on demand.
It means that, once a virtual network uses .1Q, it will create the
bridge to route the traffig and map the VLAN on the physical interface.
Dependenig on your distribution, you may need to specify the path of the
bridge control binary (brctl).
On Red Hat derivative, it is located on /usr/sbin/brctl; whereas the
default location should be /sbin/brctl.
You can either tweak the network scripts to look for the correct path or
make a link.
On 30/11/12 13:58, 于长江 wrote:
> 1. First, I create a vm on computer14, i saw network interfaces below:
> [oneadmin at computer14 ~]$ ifconfig
> eth0 Link encap:Ethernet HWaddr E8:39:35:18:A1:60
> inet addr:10.72.24.216 Bcast:10.72.24.255 Mask:255.255.255.0
> inet6 addr: fe80::ea39:35ff:fe18:a160/64 Scope:Link
> UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
> RX packets:21587155 errors:0 dropped:0 overruns:0 frame:0
> TX packets:8407735 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:22927887802 (21.3 GiB) TX bytes:667899749 (636.9 MiB)
> Memory:fbe60000-fbe80000
> eth0.100 Link encap:Ethernet HWaddr E8:39:35:18:A1:60
> inet6 addr: fe80::ea39:35ff:fe18:a160/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:16672 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:0 (0.0 b) TX bytes:784568 (766.1 KiB)
> onebr100 Link encap:Ethernet HWaddr E8:39:35:18:A1:60
> inet6 addr: fe80::acb0:e4ff:fe95:6f08/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:13746 errors:0 dropped:0 overruns:0 frame:0
> TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:398936 (389.5 KiB) TX bytes:468 (468.0 b)
> vnet0 Link encap:Ethernet HWaddr FE:00:DD:67:22:02
> inet6 addr: fe80::fc00:ddff:fe67:2202/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:500
> RX bytes:0 (0.0 b) TX bytes:732 (732.0 b)
> 2. Then, i reboot computer14
> [oneadmin at computer14 ~]$ sudo shutdown -r now
> 3. After this operation，i saw vconfig network interface has gone
> （eth0.100, onebr100）
> [oneadmin at computer14 ~]# ifconfig
> eth0 Link encap:Ethernet HWaddr E8:39:35:18:A1:60
> inet addr:10.72.24.216 Bcast:10.72.24.255 Mask:255.255.255.0
> inet6 addr: fe80::ea39:35ff:fe18:a160/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:122 errors:0 dropped:0 overruns:0 frame:0
> TX packets:102 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:13317 (13.0 KiB) TX bytes:12829 (12.5 KiB)
> Memory:fbe60000-fbe80000
> 4. When I create that vm, error occurred below:
> [root at computer14 images]# pwd
> /one_images/25/images
> [root at computer14 images]# ls
> deployment.0 disk.0 disk.1
> [root at computer14 images]# virsh create deployment.0
> error: Failed to create domain from deployment.0
> error: Failed to add tap interface to bridge 'onebr100': No such device
> ------------------------------------------------------------------------
> 于长江 | 东软
> *From:* Andreas Calvo Gómez <mailto:andreas.calvo at scytl.com>
> *Date:* 2012-11-30 20:33
> *To:* yuchj at neusoft.com <mailto:yuchj at neusoft.com>
> *CC:* users at lists.opennebula.org <mailto:users at lists.opennebula.org>
> *Subject:* Re: help: with 8021q driver, network configuration won't
> work, after host reboot (???)
> We've been using 802.1Q under CentOS 6 without problems for quite a long
> time.
> Can you post a detailed description of what is happening?
> Thanks
> On 30/11/12 07:57, users-request at lists.opennebula.org wrote:
> >
> > Message: 2
> > Date: Fri, 30 Nov 2012 14:56:47 +0800
> > From: ??? <yuchj at neusoft.com>
> > To: users <users at lists.opennebula.org>
> > Subject: [one-users] help: with 8021q driver, network configuration
> > won't work after host reboot
> > Message-ID: <201211301456470519356 at neusoft.com>
> > Content-Type: text/plain; charset="gb2312"
> >
> > As i said, with 8021q driver, network configuration won't work after host reboot. Does One notice this?
> >
> > Here is my solution for rhel below: (Is this ok?)
> > # cat $ONE_LOCATION/var/remotes/vnm/802.1Q/HostManaged.rb
> > require 'OpenNebulaNetwork'
> > ...
> > def create_bridge(bridge)
> > OpenNebula.exec_and_log_no_exit("#{COMMANDS[:brctl]} addbr #{bridge}")
> > OpenNebula.exec_and_log_no_exit("sudo sh -c 'echo brctl addbr #{bridge} >> /etc/rc.d/rc.local'")
> > end
> > ...
> > def create_dev_vlan(dev, vlan)
> > OpenNebula.exec_and_log("#{COMMANDS[:vconfig]} add #{dev} #{vlan}")
> > OpenNebula.exec_and_log("sudo sh -c 'echo vconfig add #{dev} #{vlan} >> /etc/rc.d/rc.local'")
> > end
> > ...
> > def attach_brigde_dev(bridge, dev, vlan=nil)
> > dev = "#{dev}.#{vlan}" if vlan
> > OpenNebula.exec_and_log("#{COMMANDS[:brctl]} addif #{bridge} #{dev}")
> > OpenNebula.exec_and_log("sudo sh -c 'echo brctl addif #{bridge} #{dev} >> /etc/rc.d/rc.local'")
> > end
> > ...
> > def ifup(dev, vlan=nil)
> > dev = "#{dev}.#{vlan}" if vlan
> > OpenNebula.exec_and_log("#{COMMANDS[:ip]} link set #{dev} up")
> > OpenNebula.exec_and_log("sudo sh -c 'echo ip link set #{dev} up >> /etc/rc.d/rc.local'")
> > end
> > ...
> >
> >
> >
> >
> > ??? | ??
> > ---------------------------------------------------------------------------------------------------
> > Confidentiality Notice: The information contained in this e-mail and any accompanying attachment(s)
> > is intended only for the use of the intended recipient and may be confidential and/or privileged of
> > Neusoft Corporation, its subsidiaries and/or its affiliates. If any reader of this communication is
> > not the intended recipient, unauthorized use, forwarding, printing, storing, disclosure or copying
> > is strictly prohibited, and may be unlawful.If you have received this communication in error,please
> > immediately notify the sender by return e-mail, and delete the original message and all copies from
> > your system. Thank you.
> > ---------------------------------------------------------------------------------------------------
> >
> --
> Andreas Calvo Gómez
> Systems Engineer
> Scytl Secure Electronic Voting
> Plaça Gal·la Placidia, 1-3, 1st floor · 08006 Barcelona
> Phone: + 34 934 230 324
> Fax: + 34 933 251 028
> http://www.scytl.com
> NOTICE: The information in this e-mail and in any of its attachments is
> confidential and intended solely for the attention and use of the named
> addressee(s). If you are not the intended recipient, any disclosure,
> copying,
> distribution or retaining of this message or any part of it, without the
> prior
> written consent of Scytl Secure Electronic Voting, SA is prohibited and
> may be
> unlawful. If you have received this in error, please contact the sender
> and
> delete the material from any computer.
>
> ---------------------------------------------------------------------------------------------------
> Confidentiality Notice: The information contained in this e-mail and
> any accompanying attachment(s)
> is intended only for the use of the intended recipient and may be
> confidential and/or privileged of
> Neusoft Corporation, its subsidiaries and/or its affiliates. If any
> reader of this communication is
> not the intended recipient, unauthorized use, forwarding, printing,
> storing, disclosure or copying
> is strictly prohibited, and may be unlawful.If you have received this
> communication in error,please
> immediately notify the sender by return e-mail, and delete the
> original message and all copies from
> your system. Thank you.
> ---------------------------------------------------------------------------------------------------
>
--
Andreas Calvo Gómez
Systems Engineer
Scytl Secure Electronic Voting
Plaça Gal·la Placidia, 1-3, 1st floor · 08006 Barcelona
Phone: + 34 934 230 324
Fax: + 34 933 251 028
http://www.scytl.com
NOTICE: The information in this e-mail and in any of its attachments is
confidential and intended solely for the attention and use of the named
addressee(s). If you are not the intended recipient, any disclosure,
copying,
distribution or retaining of this message or any part of it, without the
prior
written consent of Scytl Secure Electronic Voting, SA is prohibited and
may be
unlawful. If you have received this in error, please contact the sender
and
delete the material from any computer.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20121130/80211e0a/attachment-0002.htm>
More information about the Users
mailing list