[one-users] infiniband

Thu May 17 19:42:30 PDT 2012

Thanks Jamie, Borja I'll update the blog soon :)

On Mon, May 14, 2012 at 8:56 AM, Jaime Melis <jmelis at opennebula.org> wrote:

> Hi Shankhadeep,
>
> they look really nice, I've adapted your README to wiki style and added it
> to wiki.opennebula.org:
>
> http://wiki.opennebula.org/infiniband
>
> Feel free to modify it
>
> Thanks a lot for contributing it!
>
> Cheers,
> Jaime
>
>
> On Thu, May 10, 2012 at 8:46 AM, Shankhadeep Shome <shank15217 at gmail.com>wrote:
>
>> Just added the vmm driver for the IPoIB NAT stuff
>>
>>
>> On Thu, May 10, 2012 at 2:07 AM, Shankhadeep Shome <shank15217 at gmail.com>wrote:
>>
>>> Its not clear where I would upload the drivers to, I created a wiki
>>> account and a wiki page for 1-to-1 NAT configuration for IPoIB. I can just
>>> send you the tar file with the updated driver.
>>>
>>> Shankhadeep
>>>
>>>
>>> On Tue, May 8, 2012 at 9:47 AM, Jaime Melis <jmelis at opennebula.org>wrote:
>>>
>>>> Hi Shankhadeep,
>>>>
>>>> I think the community wiki site is the best place to upload these
>>>> drivers to:
>>>> http://wiki.opennebula.org/
>>>>
>>>> It's open to registration let me know if you run into any issues.
>>>>
>>>> About the blog post, our community manager will send you your login
>>>> info in a PM.
>>>>
>>>> Thanks!
>>>>
>>>> Cheers,
>>>> Jaime
>>>>
>>>>
>>>> On Mon, May 7, 2012 at 7:42 PM, Shankhadeep Shome <shank15217 at gmail.com
>>>> > wrote:
>>>>
>>>>> Sure, where and how do I do it? I noticed that you have a community
>>>>> wiki site. Do i upload the driver and make an entry there?
>>>>>
>>>>> Shankhadeep
>>>>>
>>>>>
>>>>> On Mon, May 7, 2012 at 11:54 AM, Jaime Melis <jmelis at opennebula.org>wrote:
>>>>>
>>>>>> Hello Shankhadeep,
>>>>>>
>>>>>> that sounds really nice. Would you be interested in contributing your
>>>>>> code to OpenNebula's ecosystem and/or publishing an entry in opennebula's
>>>>>> blog?
>>>>>>
>>>>>> Regards,
>>>>>> Jaime
>>>>>>
>>>>>>
>>>>>> On Sun, May 6, 2012 at 5:39 AM, Shankhadeep Shome <
>>>>>> shank15217 at gmail.com> wrote:
>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Sat, May 5, 2012 at 11:38 PM, Shankhadeep Shome <
>>>>>>> shank15217 at gmail.com> wrote:
>>>>>>>
>>>>>>>> Hi Chris
>>>>>>>>
>>>>>>>> We have a solution we are using on Oracle Exalogic hardware (we are
>>>>>>>> using the bare metal boxes and gateway switches). I think I understand the
>>>>>>>> requirement, IB accessible storage from VMs is possible however its a bit
>>>>>>>> convoluted. Our solution was to create a one-to-one NAT from the VMs to the
>>>>>>>> IB IPoIB network. This allows the VMs to mount storage natively over the IB
>>>>>>>> network. The performance is pretty good, about 9Gbps per node with 64k MTU
>>>>>>>> sizes.  We created an open nebula driver for this and I'm happy to share it
>>>>>>>> with the community. The driver handles VM migrations by enabling/diabling
>>>>>>>> ip aliases on the host and can also be used to manipulate iptable rules on
>>>>>>>> source and destination when open nebula moves VMs around.
>>>>>>>>
>>>>>>>> Shankhadeep
>>>>>>>>
>>>>>>>>
>>>>>>>> On Sat, May 5, 2012 at 5:42 PM, Chris Barry <cbarry at rjmetrics.com>wrote:
>>>>>>>>
>>>>>>>>> Reading more, I see that the available methods for block store are
>>>>>>>>> iSCSI, and that the LUNS are attached to the host. From there, a symlink
>>>>>>>>> tree exposes the target to the guest in a predictable way on every host.
>>>>>>>>>
>>>>>>>>> So then to modify my question a bit, are all LUNs attached to all
>>>>>>>>> hosts simultaneously? Or does the attachment only happen when a migration
>>>>>>>>> is to occur? Also, is the LUN put into a read-only mode or something during
>>>>>>>>> migration on the original host to protect the data? Or, must a clustering
>>>>>>>>> filesystem be employed?
>>>>>>>>>
>>>>>>>>> Guess I have a lot to read :)
>>>>>>>>>
>>>>>>>>> Thanks
>>>>>>>>> -C
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Sat, May 5, 2012 at 5:23 PM, Chris Barry <cbarry at rjmetrics.com>wrote:
>>>>>>>>>
>>>>>>>>>> Hi Gubda,
>>>>>>>>>>
>>>>>>>>>> Thank you for replying. My goal was to use a single shared iso
>>>>>>>>>> image to boot from, and use an in-memory minimal linux on each node that
>>>>>>>>>> had no 'disk' at all, then to mount logical data volume(s) from a
>>>>>>>>>> centralized storage system. Perhaps that is outside the scope of
>>>>>>>>>> opennebula's design goals, and may not be possible  - I'm just now
>>>>>>>>>> investigating it.
>>>>>>>>>>
>>>>>>>>>> I see you are using NFS, but my desire is to use block storage
>>>>>>>>>> instead, ideally LVM, and not incur the performance penalties of IPoIB. It
>>>>>>>>>> does sound simple though, and that's always good. Do you have any
>>>>>>>>>> performance data on that setup in terms of IOPs and/or MB/s write speeds?
>>>>>>>>>> It does sound interesting.
>>>>>>>>>>
>>>>>>>>>> Thanks again,
>>>>>>>>>> -C
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Sat, May 5, 2012 at 4:01 PM, Guba Sándor <gubasanyi at gmail.com>wrote:
>>>>>>>>>>
>>>>>>>>>>>  Hi
>>>>>>>>>>>
>>>>>>>>>>> I'm using InfiniBand to make shared storage. My setup is simple:
>>>>>>>>>>> the opennebula installdir is shared on NFS with the worker nodes.
>>>>>>>>>>>
>>>>>>>>>>> - I don't understand what you mean on shared image. There will
>>>>>>>>>>> be a copy (or symlink if the image is persistent) on the NFS host and that
>>>>>>>>>>> is that the hypervisor will use over the network. Live migrate is available
>>>>>>>>>>> beacuse you don't move the image only another host will use it from the
>>>>>>>>>>> same spot. With my linux images I have about 30s delay when livemigrate.
>>>>>>>>>>> You can use qcow2 driver for shared image.
>>>>>>>>>>>
>>>>>>>>>>> - I don't understant exactly what you mean on "guest unaware".
>>>>>>>>>>> If you mean storage - host connection it has nothing to do with nebula. You
>>>>>>>>>>> can use any shared filesystem. NFS uses IPoIB connection.
>>>>>>>>>>>
>>>>>>>>>>> 2012-05-05 19:01 keltezéssel, Chris Barry írta:
>>>>>>>>>>>
>>>>>>>>>>> Greetings,
>>>>>>>>>>>
>>>>>>>>>>> I'm interested in hearing user accounts about using infiniband
>>>>>>>>>>> as the storage interconnect with OpenNebula if anyone has any thoughts to
>>>>>>>>>>> share. Specifically about:
>>>>>>>>>>> * using a shared image and live migrating it (e.g. no copying of
>>>>>>>>>>> images).
>>>>>>>>>>> * is the guest unaware of the infiniband or is it running IB
>>>>>>>>>>> drivers?
>>>>>>>>>>> * does the host expose the volumes to the guest, or does the
>>>>>>>>>>> guest connect directly?
>>>>>>>>>>> * I'd like to avoid iSCSI over IPoIB if possible.
>>>>>>>>>>> * clustering filesystem/LVM requirements.
>>>>>>>>>>> * file-based vdisk or logical volume usage?
>>>>>>>>>>>
>>>>>>>>>>> Anything, an experiences at all will be helpful.
>>>>>>>>>>>
>>>>>>>>>>> Thanks
>>>>>>>>>>> Christopher
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> Users mailing listUsers at lists.opennebula.orghttp://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> Users mailing list
>>>>>>>>>>> Users at lists.opennebula.org
>>>>>>>>>>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> Users mailing list
>>>>>>>>> Users at lists.opennebula.org
>>>>>>>>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Users mailing list
>>>>>>> Users at lists.opennebula.org
>>>>>>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Jaime Melis
>>>>>> Project Engineer
>>>>>> OpenNebula - The Open Source Toolkit for Cloud Computing
>>>>>> www.OpenNebula.org | jmelis at opennebula.org
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Jaime Melis
>>>> Project Engineer
>>>> OpenNebula - The Open Source Toolkit for Cloud Computing
>>>> www.OpenNebula.org | jmelis at opennebula.org
>>>>
>>>
>>>
>>
>
>
> --
> Jaime Melis
> Project Engineer
> OpenNebula - The Open Source Toolkit for Cloud Computing
> www.OpenNebula.org | jmelis at opennebula.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20120517/36929e12/attachment-0002.htm>