[one-users] No Bootable device

[Mohamed Mohamed]

The output is the following:

$onevm show 35

VIRTUAL MACHINE 35 INFORMATION                                                  
ID                  : 35                  
NAME                : one-35              
USER                : oneadmin            
GROUP               : oneadmin            
STATE               : ACTIVE              
LCM_STATE           : RUNNING             
RESCHED             : No                  
HOSTNAME            : 157.159.110.194     
START TIME          : 06/28 14:16:22      
END TIME            : -                   
DEPLOY ID           : one-35              

VIRTUAL MACHINE MONITORING                                                      
NET_RX              : 37002465            
USED CPU            : 5                   
USED MEMORY         : 524288              
NET_TX              : 6603                

PERMISSIONS                                                                     
OWNER               : um-                 
GROUP               : ---                 
OTHER               : ---                 

VIRTUAL MACHINE TEMPLATE                                                        
CPU="1"
GRAPHICS=[
  LISTEN="0.0.0.0",
  PORT="5935",
  TYPE="vnc" ]
INPUT=[
  BUS="usb",
  TYPE="mouse" ]
MEMORY="512"
NAME="one-35"
NIC=[
  BRIDGE="br0",
  IP="10.0.0.6",
  MAC="02:00:0a:00:00:06",
  NETWORK="Virtual Network 1",
  NETWORK_ID="0",
  NETWORK_UNAME="oneadmin",
  PHYDEV="eth0",
  VLAN="YES" ]
OS=[
  ARCH="x86_64",
  BOOT="hd" ]
RAW=[
  TYPE="kvm" ]
TEMPLATE_ID="0"
VCPU="1"
VMID="35"






----- Mail original -----
De: "Javier Fontan" <jfontan at opennebula.org>
À: "Mohamed Mohamed" <mohamed.mohamed at telecom-sudparis.eu>
Cc: "users" <users at lists.opennebula.org>
Envoyé: Vendredi 29 Juin 2012 12:27:09
Objet: Re: [one-users] No Bootable device

Can you send us the output of command 'onevm show' and/or the template
you are using to create that VM?

On Thu, Jun 28, 2012 at 2:20 PM, Mohamed Mohamed
<mohamed.mohamed at telecom-sudparis.eu> wrote:
> Hi all,
> I installed opennebula 3.6 on ubuntu 12.4 TLS with one frontend and 2 hosts.
> When i try to launch new VMs they pass to running state. I can connect to
> these machines using vnc (using sunstone interface).
> In the vnc opend interface there is an attempt to boot but an error message
> is shown:
>
> No bootable device.
>
> PS: I can run the vm.img locally using the command :
> kvm -m 512 image.img
>
> Could it be a problem related to contextualization ?
> Any suggestion is welcome.
> Best regards;
> Mohamed.
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opennebula.org
> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>



-- 
Javier Fontán Muiños
Project Engineer
OpenNebula - The Open Source Toolkit for Data Center Virtualization
www.OpenNebula.org | jfontan at opennebula.org | @OpenNebula
_______________________________________________
Users mailing list
Users at lists.opennebula.org
http://lists.opennebula.org/listinfo.cgi/users-opennebula.org