[one-users] Virtual Machine has no network interfaces

[Carlos Martín Sánchez]

Hi,

The network interfaces are defined with the NIC attribute, not NETWORK [1].

Regards

[1] http://opennebula.org/documentation:rel3.4:template#network_section
--
Carlos Martín, MSc
Project Engineer
OpenNebula - The Open-source Solution for Data Center Virtualization
www.OpenNebula.org | cmartin at opennebula.org |
@OpenNebula<http://twitter.com/opennebula><cmartin at opennebula.org>



On Thu, Jun 14, 2012 at 9:46 PM, Ronaldo Pinheiro <ronaldopg010 at gmail.com>wrote:

> Here is the VM template im using:
> NAME = "VM"
> CPU = 1
> MEMORY = 1024
>
> OS = [
>         boot = hd,
>         arch = x86_64 ]
>
> DISK = [
>         image_id = 0,
>         bus = virtio ]
>
> NETWORK = [
>         network = "LAN",
>         bridge = "br0",
>         model = virtio ]
>
> GRAPHICS = [
>         type = "vnc",
>         listen = "0.0.0.0"]
>
> Here is the command onevm show output:
> $ onevm show 34
> VIRTUAL MACHINE 34
> INFORMATION
> ID             : 34
> NAME           : VM
> STATE          : ACTIVE
> LCM_STATE      : RUNNING
> START TIME     : 06/14 16:38:20
> END TIME       : -
> DEPLOY ID:     : one-34
>
> VIRTUAL MACHINE
> MONITORING
> NET_TX         : 0
> USED MEMORY    : 0
> USED CPU       : 0
> NET_RX         : 0
>
> VIRTUAL MACHINE
> TEMPLATE
> CPU=1
> DISK=[
>   BUS=virtio,
>   CLONE=YES,
>   DISK_ID=0,
>   DRIVER=qcow2,
>   IMAGE=Planeswalker,
>   IMAGE_ID=5,
>   READONLY=NO,
>   SAVE=NO,
>   SOURCE=/var/lib/one//images/b355510b41157fcc886246ac3c3e46993278e0c3,
>   TARGET=hda,
>   TYPE=DISK ]
> GRAPHICS=[
>   LISTEN=0.0.0.0,
>   PORT=5934,
>   TYPE=vnc ]
> MEMORY=1024
> NAME=VM
> NETWORK=[
>   BRIDGE=br0,
>   MODEL=virtio,
>   NETWORK=LAN ]
> OS=[
>   ARCH=x86_64,
>   BOOT=hd ]
> VMID=34
>
>
>
> On Thu, Jun 14, 2012 at 1:16 PM, Carlos Martín Sánchez <
> cmartin at opennebula.org> wrote:
>
>> Hi,
>>
>> Can you paste your VM template, and the output of onevm show?
>> By the way, OpenNebula has come a long way since 2.2, the latest version
>> is 3.4
>>
>> Regards
>> --
>> Carlos Martín, MSc
>> Project Engineer
>> OpenNebula - The Open-source Solution for Data Center Virtualization
>> www.OpenNebula.org | cmartin at opennebula.org | @OpenNebula<http://twitter.com/opennebula><cmartin at opennebula.org>
>>
>>
>>
>> On Thu, Jun 14, 2012 at 4:08 PM, Ronaldo Pinheiro <ronaldopg010 at gmail.com
>> > wrote:
>>
>>> Hello,
>>>
>>> I am running opennebula 2.2 in ubuntu server 11.10, which was installed
>>> through apt-get.
>>> Everything works fine, except one thing. When i execute onevm submit,
>>> the VM goes to the host and starts normally, but as soon as it boots, there
>>> are no network interfaces. If i execute ifconfig, it shows "loopback" and
>>> "virbr0".
>>> The host machine uses KVM.
>>>
>>> If i use virt-manager to submit the same VM, it starts, shows an
>>> additional interface "eth0", and gets an IP address from the dhcp server.
>>>
>>> I suppose there is an error in my opennebula configuration.
>>> I have set oned.conf to work with kvm and i cant see any errors in the
>>> template files.
>>> The virtual network used is set to ranged. The bridge is "br0".
>>>
>>> I cant think of anything else. Am i missing something?
>>> All help is greatly appreciated.
>>> Thanks in advance,
>>>
>>> Ronaldo.
>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at lists.opennebula.org
>>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>>
>>>
>>
>
>
> --
> Ronaldo Pinheiro Gonçalves Junior
> Mestrando - Programa de Pós-Graduação em Informática Aplicada
> Universidade de Fortaleza - UNIFOR
> (85) 8885-7991 / (85) 81425627 / (85) 3224-7991
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20120615/965b36c4/attachment-0003.htm>