[one-users] one3.4 & vmware hypervisor 's virtual machine & cpu=0&mem=0

Tino Vazquez tinova at opennebula.org
Tue Jun 12 06:44:21 PDT 2012


Hi,

There is currently no version of libvirt that supports dynamic
monitorization of a VM resource consumption in VMware.

We are currently working on ways around this, any suggestion on this regard
would be highly appreciated.

Best regards,

-Tino

--
Constantino Vázquez Blanco, MSc
Project Engineer
OpenNebula - The Open-Source Solution for Data Center Virtualization
www.OpenNebula.org | @tinova79 | @OpenNebula


On Mon, Jun 11, 2012 at 12:07 PM, 张光鹏 <zhanggp at neusoft.com> wrote:

> **
> Hi,
> Thank you for your reply .
> I ignored this description
> http://www.opennebula.org/documentation:rel3.4:evmwareg#considerations_limitations
>>     libvirt < = 0.9.2 (and possibly higher versions) does not report
> consumption of the VMs, the only information retrieved from the VMs is the
> state
> I use the libvirt version 0.9.7 .So can you tell me
> which version can provide data .And can we find a way to get these data
> without libvirt?
> ------------------------------
> 张光鹏
>
>  *发件人:* Tino Vazquez <tinova at opennebula.org>
> *发送时间:* 2012-06-11 17:55
> *收件人:* zhanggp <zhanggp at neusoft.com>
> *抄送:* users <users at lists.opennebula.org>
> *主题:* Re: Re: [one-users] one3.4 & vmware hypervisor 's virtual machine &
> cpu=0&mem=0
>  Hi,
>
> The reason behind the VM representation (which is the OCA representation
> of a VM) in the script shows 0 in both cpu and mem is because libvirt
> doesn't provide it.
>
> Regards,
>
> -Tino
>
> --
> Constantino Vázquez Blanco, MSc
> Project Engineer
> OpenNebula - The Open-Source Solution for Data Center Virtualization
> www.OpenNebula.org | @tinova79 | @OpenNebula
>
>
> On Mon, Jun 11, 2012 at 6:37 AM, zhanggp <zhanggp at neusoft.com> wrote:
>
>> **
>> Hi,
>> I know how  the ruby script ""../ONE/var/remotes/im/vmware.d/vmware.rb"
>> work .  The script get vm's  info (such as cpu and mem) from database by
>> the host .
>> And i didnot change the script , my vm's cpu and mem shown "0".
>>
>> So i want to know how  openenebula3.4 use CLI , and where can i find it ?
>> I want to check if openenbula calling CLI correctly ?
>>
>> Thanks.
>>
>> ------------------------------
>> zhanggp
>>
>>  *发件人:* Tino Vazquez <tinova at opennebula.org>
>> *发送时间:* 2012-06-08 21:50
>> *收件人:* 张光鹏 <zhanggp at neusoft.com>
>> *抄送:* users <users at lists.opennebula.org>
>> *主题:* Re: Re: [one-users] one3.4 & vmware hypervisor 's virtual machine
>> & cpu=0&mem=0
>>   Hi,
>>
>> What does "vms" contain?
>>
>> Regards,
>>
>> -Tino
>>
>> --
>> Constantino Vázquez Blanco, MSc
>> Project Engineer
>> OpenNebula - The Open-Source Solution for Data Center Virtualization
>> www.OpenNebula.org | @tinova79 | @OpenNebula
>>
>>
>> On Fri, Jun 8, 2012 at 12:15 PM, 张光鹏 <zhanggp at neusoft.com> wrote:
>>
>>> **
>>> Hi,
>>> how can i get vm's value.
>>> I checked this ruby file
>>> "../ONE/var//remotes/im/vmware.d/vmware.rb",and this line return nil
>>> "vms = VirtualMachinePool.new(client) ", so the next cmd will not be used.
>>>
>>> can you help he resolve this problem?
>>>
>>> ------------------------------
>>> 张光鹏
>>>
>>>  *发件人:* Tino Vazquez <tinova at opennebula.org>
>>> *发送时间:* 2012-06-08 17:30
>>> *收件人:* 张光鹏 <zhanggp at neusoft.com>
>>> *抄送:* users <users at lists.opennebula.org>
>>> *主题:* Re: [one-users] one3.4 & vmware hypervisor 's virtual machine &
>>> cpu=0&mem=0
>>>   Hi,
>>>
>>> The values shown in the CLI are for dynamic, current consumption of the
>>> VM. Using virsh is not possible to obtain such values, just the maximum
>>> values, that's why 0 is shown.
>>>
>>> Regards,
>>>
>>> -Tino
>>>
>>> --
>>> Constantino Vázquez Blanco, MSc
>>> Project Engineer
>>> OpenNebula - The Open-Source Solution for Data Center Virtualization
>>> www.OpenNebula.org | @tinova79 | @OpenNebula
>>>
>>>
>>> On Fri, Jun 8, 2012 at 5:03 AM, 张光鹏 <zhanggp at neusoft.com> wrote:
>>>
>>>> **
>>>> Hi
>>>> I use openenbula3.4 management vmware hypervisor 。My host state are on
>>>> , my vm state are "runn", but vms's cpu and mem are 0:
>>>>
>>>> this file "../ONE/var/remotes/im/vmware.d/vmware.rb"  looks like the
>>>> script to detect virtual machine data , but it can not work .
>>>> My esx4.1 are all not install ruby.
>>>> I know a way to detect virtual machine data ,so could   opennebula do
>>>> some work for that?
>>>>
>>>> Thanks.
>>>> ------------------------------
>>>>  张光鹏
>>>> tel:  13718913184
>>>> mail: zhanggp at neusoft.com
>>>> 移动互联网事业部
>>>>  东软集团股份有限公司
>>>> http://www.neusoft.com
>>>>
>>>>
>>>> ---------------------------------------------------------------------------------------------------
>>>> Confidentiality Notice: The information contained in this e-mail and
>>>> any accompanying attachment(s)
>>>> is intended only for the use of the intended recipient and may be
>>>> confidential and/or privileged of
>>>> Neusoft Corporation, its subsidiaries and/or its affiliates. If any
>>>> reader of this communication is
>>>> not the intended recipient, unauthorized use, forwarding, printing,
>>>> storing, disclosure or copying
>>>> is strictly prohibited, and may be unlawful.If you have received this
>>>> communication in error,please
>>>> immediately notify the sender by return e-mail, and delete the original
>>>> message and all copies from
>>>> your system. Thank you.
>>>>
>>>> ---------------------------------------------------------------------------------------------------
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at lists.opennebula.org
>>>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>>>
>>>>
>>>
>>> ---------------------------------------------------------------------------------------------------
>>> Confidentiality Notice: The information contained in this e-mail and any
>>> accompanying attachment(s)
>>> is intended only for the use of the intended recipient and may be
>>> confidential and/or privileged of
>>> Neusoft Corporation, its subsidiaries and/or its affiliates. If any
>>> reader of this communication is
>>> not the intended recipient, unauthorized use, forwarding, printing,
>>> storing, disclosure or copying
>>> is strictly prohibited, and may be unlawful.If you have received this
>>> communication in error,please
>>> immediately notify the sender by return e-mail, and delete the original
>>> message and all copies from
>>> your system. Thank you.
>>>
>>> ---------------------------------------------------------------------------------------------------
>>>
>>
>>
>> ---------------------------------------------------------------------------------------------------
>> Confidentiality Notice: The information contained in this e-mail and any
>> accompanying attachment(s)
>> is intended only for the use of the intended recipient and may be
>> confidential and/or privileged of
>> Neusoft Corporation, its subsidiaries and/or its affiliates. If any
>> reader of this communication is
>> not the intended recipient, unauthorized use, forwarding, printing,
>> storing, disclosure or copying
>> is strictly prohibited, and may be unlawful.If you have received this
>> communication in error,please
>> immediately notify the sender by return e-mail, and delete the original
>> message and all copies from
>> your system. Thank you.
>>
>> ---------------------------------------------------------------------------------------------------
>>
>
>
> ---------------------------------------------------------------------------------------------------
> Confidentiality Notice: The information contained in this e-mail and any
> accompanying attachment(s)
> is intended only for the use of the intended recipient and may be
> confidential and/or privileged of
> Neusoft Corporation, its subsidiaries and/or its affiliates. If any reader
> of this communication is
> not the intended recipient, unauthorized use, forwarding, printing,
> storing, disclosure or copying
> is strictly prohibited, and may be unlawful.If you have received this
> communication in error,please
> immediately notify the sender by return e-mail, and delete the original
> message and all copies from
> your system. Thank you.
>
> ---------------------------------------------------------------------------------------------------
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20120612/e63a905a/attachment-0003.htm>


More information about the Users mailing list