[one-users] VM status is runn but it doesn't make contact

[Erico Augusto Cavalcanti Guedes]

Dears,

after almost one month nothing changes...

2012/5/28 cloud.b.lab <cloud.b.lab at zoho.com>

> **
> Erico,
>
> Quick cross checks:
>
> Try connecting to the VM using VNC and check if the IP assigned is same as
> the one below [Hope you are using Contextualization].
>
It isn't possible to use VNC if I'm not able to ping, nmap or ssh the image.


> See if the ICMP protocol is blocked.
>
No, it isn't ... running image through virtualbox, I'm able to ping, nmap
and ssh the image.


> Try by switching off the firewall
>

Firewall has no rules:
$ sudo iptables -L
Chain INPUT (policy ACCEPT)
target     prot opt source               destination

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination

But, now, it's clear that the problem is with our image. When configure and
run ttyimage, all works fine. Nevertheless, we use our image on ON 2.1 and
it works fine. It's all customized image, with all applications installed
and running. We simple do not have any creative ideas to solve the problem
... we try everything possible, and we can not connect image.

any further suggestions?

thanks a lot,

Erico.


>
> Regards,
> anil.
>
> ---- On Mon, 28 May 2012 18:12:24 -0700 *Erico Augusto Cavalcanti Guedes <
> eacg at cin.ufpe.br>* wrote ----
>
> Dears OpenNebula Users,
>
> $ /srv3/cloud/one/bin/onevm list
>     ID USER     GROUP    NAME         STAT CPU     MEM
> HOSTNAME        TIME
>     11 oneadmin oneadmin CloudProxy   runn   0    128M      mc3-node03
> 3d 04:02
>
> $ tail -n 6 /srv3/cloud/one/var/11/vm.log
> Mon May 28 20:59:39 2012 [VMM][I]: ExitCode: 0
> Mon May 28 20:59:39 2012 [VMM][D]: Monitor Information:
>     CPU   : 0
>     Memory: 131072
>     Net_TX: 0
>     Net_RX: 489564544
>
> $ /srv3/cloud/one/bin/onevm show 11
> ...
> NIC=[
>   BRIDGE="br0",
>   IP="192.168.15.2",
>   MAC="02:00:c0:a8:0f:02",
>   NETWORK="Modcs",
>   NETWORK_ID="0",
>   VLAN="NO" ]
> ...
>
> ifconfig from frontend
> $ ifconfig
> br0       Link encap:Ethernet  HWaddr 00:1f:d0:e2:4e:b9
>           inet addr:192.168.15.254  Bcast:192.168.15.255
> Mask:255.255.255.0
> ...
>
> eth0      Link encap:Ethernet  HWaddr 00:1f:d0:e2:4e:b9
>           inet addr:192.168.15.200  Bcast:0.0.0.0  Mask:255.255.255.0
> ...
>
>
> As can be viewed, VM status is runn and it is logging, but no contact can
> be made with it:
>
> $ ping 192.168.15.2
> PING 192.168.15.2 (192.168.15.2) 56(84) bytes of data.
> From 192.168.15.254 icmp_seq=1 Destination Host Unreachable
> From 192.168.15.254 icmp_seq=2 Destination Host Unreachable
> From 192.168.15.254 icmp_seq=3 Destination Host Unreachable
>
> bridge, datastore, vnet and image are properly created and tested.
> I used arp-scan, trying to visualize VM IP, but it doesn't works.
>
> Some advices?
>
> Thanks,
>
> Erico.
>
>
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opennebula.org
> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20120620/92e43b55/attachment-0002.htm>