[one-users] ERROR after create a Host over Sunstone or over front-end

Tue Feb 28 02:33:10 PST 2012

Dear Vladimir,

On Mon, Feb 27, 2012 at 3:33 PM, Oemer Suermen <Oemer.Suermen at easynet.com>wrote:

>  Hello Tino,****
>
> ** **
>
> i can connect without problems over telnet (port 443) to the ESXi-Host.***
> *
>
> ** **
>
> *These are will be shown, if I type the virsh  -c  command:*
>
> ** **
>
> opennebula.local.de:~ # virsh -c esx://esxi01.local.de/?no_verify=1--readonly nodeinfo
> ****
>
> Enter username for esxi01.local.de [root]: oneadmin****
>
> Enter oneadmin's password for esxi01.local.de: ****
>
> CPU model:           Intel Xeon CPU X5450 @ 3.00GHz****
>
> CPU(s):              8****
>
> CPU frequency:       3000 MHz****
>
> CPU socket(s):       2****
>
> Core(s) per socket:  4****
>
> Thread(s) per core:  1****
>
> NUMA cell(s):        1****
>
> Memory size:         33551960 kB
>

Good

> ****
>
> ** **
>
> My problem is that the VM´s, which running on the ESXi-Host, before I
> beginning the work with opennebula, will not shown.****
>
> ** **
>
> Can opennebula the existing VMs on the ESXi-Host, which before was creates
> with the vSphere from vmware, in opennebula shown?
>

Nope, OpenNebula assumes an exclusive management of resources, and it won't
import them automatically.

> ****
>
> Is it possible that I all my ESXi-hosts and the VM´s on it, centrally can
> administrating with opennebula?
>

Certainly, but you need to create them through OpenNebula.

Regards,

-Tino

> ****
>
> ** **
>
> I unfortunately will not help if I can just create VM´s on opennebula via
> templates, i hope it is not so.****
>
> ** **
>
> Find also nothing in the mail archives.****
>
> ** **
>
> Thanks for your help.****
>
> ** **
>
> Nice greetings,****
>
> Ömer****
>
> ** **
>
> ** **
>
> ** **
>
> ** **
>
> ** **
>
> ****
>
> *Von:* Tino Vazquez [mailto:tinova at opennebula.org]
> *Gesendet:* Donnerstag, 23. Februar 2012 12:24
> *An:* Oemer Suermen
> *Cc:* users
>
> *Betreff:* Re: [one-users] ERROR after create a Host over Sunstone or
> over front-end****
>
> ** **
>
> Dear Omer,****
>
> ** **
>
> That looks like a network connectivity problem, not related to OpenNebula
> configuration. Please make sure that you can telnet the 443 from the
> front-end to the ESX host.****
>
> ** **
>
> Regards,****
>
> ** **
>
> -Tino****
>
>
> --
> Constantino Vázquez Blanco, MSc
> Project Engineer
> OpenNebula - The Open-Source Solution for Data Center Virtualization
> www.OpenNebula.org | @tinova79 | @OpenNebula
>
> ****
>
> On Thu, Feb 23, 2012 at 11:37 AM, Oemer Suermen <Oemer.Suermen at easynet.com>
> wrote:****
>
> Hi Tino,****
>
>  ****
>
> here the output from virsh -c****
>
>  ****
>
>                 opennebula.local.de.easynet.net:/etc/one # virsh -c gsx://
> esxi01.local.de.easynet.net/?no_verify=1 --readonly nodeinfo****
>
>                 Enter username for esxi01.local.de.easynet.net [root]:
> myusername****
>
>                 Enter oneadmin's password for esxi01.local.de.easynet.net:
> ****
>
>                 error: internal error curl_easy_perform() returned an
> error: Couldn't connect to server (7) : couldn't connect to host****
>
>                 error: failed to connect to the hypervisor****
>
>  ****
>
>  ****
>
> *++++ Here my vmwarerc ++++*****
>
>  ****
>
> # User configurable variables (Ruby syntax)****
>
> LIBVIRT_URI    = "esx://esxi01.local.de.easynet.net/?no_verify=1"****
>
> QEMU_PROTOCOL  = "qemu"****
>
>  ****
>
> # Username and password of the VMware hypervisor****
>
> USERNAME       = "oneadmin"****
>
> PASSWORD       = "mypassword"****
>
> DATACENTER     = "Datacenter"                                #only for
> vMotion****
>
> VCENTER             = "vCenter"
>  #only for vMotion****
>
>  ****
>
>  ****
>
>  ****
>
> # Loading the vmware library for mads****
>
> # Please leave this uncommented****
>
> ONE_LOCATION=ENV["ONE_LOCATION"] if !defined?(ONE_LOCATION)****
>
>  ****
>
> if !ONE_LOCATION****
>
>    LIB_LOCATION = "/usr/lib/one"  if !defined?(LIB_LOCATION)****
>
> else****
>
>    LIB_LOCATION = ONE_LOCATION+"/lib" if !defined?(LIB_LOCATION)****
>
> end****
>
>  ****
>
> load LIB_LOCATION + "/ruby/vmwarelib.rb"****
>
>  ****
>
> ENV['LANG']='C'****
>
>  ****
>
>  ****
>
> ****
>
>  ****
>
>  ****
>
> Thanks for your help.****
>
>  ****
>
> Greetings,****
>
> Ömer****
>
>  ****
>
>  ****
>
>  ****
>
>  ****
>
>  ****
>
> -----Ursprüngliche Nachricht-----
> Von: Tino Vazquez [mailto:tinova at opennebula.org]
> Gesendet: Freitag, 17. Februar 2012 15:26
> An: Oemer Suermen
> Cc: users at lists.opennebula.org
> Betreff: Re: [one-users] ERROR after create a Host over Sunstone or over
> front-end****
>
>  ****
>
> Dear Omer,****
>
>  ****
>
> What is the output of "virsh -c****
>
> gsx://esxi01.local.de.easynet.net/?no_verify=1 --readonly nodeinfo"?****
>
> If there seems to be a connectivity problem, please make sure that your
> network configuration allows the connection between the ONE front-end and "
> esxi01.local.de.easynet.net".****
>
>  ****
>
> Regards,****
>
>  ****
>
> -Tino****
>
>  ****
>
> --****
>
> Constantino Vázquez Blanco, MSc****
>
> Project Engineer****
>
> OpenNebula - The Open-Source Solution for Data Center Virtualization
> www.OpenNebula.org | @tinova79 | @OpenNebula****
>
>  ****
>
>  ****
>
>  ****
>
>  ****
>
>  ****
>
> On Thu, Feb 16, 2012 at 1:54 PM, Oemer Suermen <Oemer.Suermen at easynet.com>
> wrote:****
>
> > Hi guys,****
>
> > ****
>
> > i have a new problem.****
>
> > ****
>
> > I try to create a new Host over the sunstone gui and over the front-end
> but always in ERROR.****
>
> > ****
>
> > Here is a little snapshot from the oned.log with this ERROR, maybe you
> can help to resolve this problem.****
>
> > ****
>
> >        Thu Feb 16 14:21:10 2012 [AuM][I]: ExitCode: 0****
>
> >        Thu Feb 16 14:21:10 2012 [AuM][D]: Message received: ****
>
> > AUTHENTICATE SUCCESS 2 -****
>
> > ****
>
> >        Thu Feb 16 14:21:10 2012 [ReM][D]: HostInfo method invoked****
>
> >        Thu Feb 16 14:21:12 2012 [ReM][D]: HostInfo method invoked****
>
> >        Thu Feb 16 14:21:15 2012 [InM][I]: Monitoring host ****
>
> > esxi01.local.de.easynet.net (17)****
>
> >        Thu Feb 16 14:21:17 2012 [InM][I]: Command execution fail: ****
>
> > /var/lib/one/remotes/im/run_probes vmware 17 ****
>
> > esxi01.local.de.easynet.net****
>
> >        Thu Feb 16 14:21:17 2012 [InM][I]: [VMWARE] cmd failed
> [/usr/bin/tty_expect -u oneadmin -p XXX virsh -c gsx://
> esxi01.local.de.easynet.net/?no_verify=1 --readonly nodeinfo]. Stderr:****
>
> >        Thu Feb 16 14:21:17 2012 [InM][I]: error: internal error ****
>
> > curl_easy_perform() returned an error: Couldn't connect to server (7) **
> **
>
> > : couldn't connect to host****
>
> >        Thu Feb 16 14:21:17 2012 [InM][I]: error: failed to connect to **
> **
>
> > the hypervisor****
>
> >        Thu Feb 16 14:21:17 2012 [InM][I]: . Stdout: ExitCode: 1****
>
> >        Thu Feb 16 14:21:17 2012 [InM][I]: ./vmware.rb:72: private ****
>
> > method `split' called for 1:Fixnum (NoMethodError)****
>
> >        Thu Feb 16 14:21:17 2012 [InM][E]: Error executing vmware.rb****
>
> >        Thu Feb 16 14:21:17 2012 [InM][I]: ExitCode: 1****
>
> >        Thu Feb 16 14:21:17 2012 [InM][E]: Error monitoring host 17 : ***
> *
>
> > MONITOR FAILURE 17 Error executing vmware.rb****
>
> > ****
>
> > ****
>
> > Here a message from the Sunstone GUI:****
>
> > ****
>
> >        Host template****
>
> >        ERROR****
>
> > ****
>
> >        TIMESTAMP       Thu Feb 16 14:21:17 2012****
>
> >        MESSAGE         Error monitoring host 17 : MONITOR FAILURE 17 ***
> *
>
> > Error executing vmware.rb****
>
> > ****
>
> >        Status = Error****
>
> >        State = Error****
>
> > ****
>
> > I thank you in advance for your help, you responds very quickly, which
> work with the opennebula agreeably.****
>
> > Even if there are problems here and there.****
>
> > ****
>
> > Regards,****
>
> > Ömer****
>
> > ****
>
> > _______________________________________________****
>
> > Users mailing list****
>
> > Users at lists.opennebula.org****
>
> > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org****
>
> ** **
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20120228/8c5230f8/attachment-0003.htm>