[one-users] failed to create domain

Carlos Martín Sánchez cmartin at opennebula.org
Fri Apr 27 01:13:22 PDT 2012


Hi,

If your VM is not moving from pending, you should check that the scheduler
is running. Look for the mm_sched process, and take a look at
/var/log/one/sched.log.
Or maybe you just ran out of CPU or MEMORY capacity in your hosts.

Regards.
--
Carlos Martín, MSc
Project Engineer
OpenNebula - The Open-source Solution for Data Center Virtualization
www.OpenNebula.org | cmartin at opennebula.org |
@OpenNebula<http://twitter.com/opennebula><cmartin at opennebula.org>



On Wed, Apr 25, 2012 at 4:48 PM, Teik Hooi Beh <thbeh at thbeh.com> wrote:

> Hi,
>
> I did try as mentioned in
> http://opennebula.org/documentation:rel3.4:kvmg#kvm_configuration but VM
> is going into never ending pending state  and no logs were reported.
>
> I will redeploy again. Has anyone published an installation guidelines on
> Ubuntu 11.10 other than from  http://cloudblab.wordpress.com/
>
> Regards
> Beh
>
>
>
> On Wed, Apr 25, 2012 at 3:59 PM, Michael Kutzner <
> michael.kutzner at virtion.net> wrote:
>
>> Hi,
>>
>> did you check qemu conf as described here:
>> http://opennebula.org/documentation:rel3.4:kvmg#kvm_configuration
>> (had a similar error at the beginning ... )
>>
>>
>> Best, Michael
>>
>> Am 25.04.2012 um 02:02 schrieb Teik Hooi Beh:
>>
>> Hi,
>>
>> I manage to solve the previous issue by changing "dynamic_ownership = 0".
>> But now I have a new error which is also due to permission denied error:-
>>
>> Wed Apr 25 00:05:11 2012 [DiM][I]: New VM state is ACTIVE.
>> Wed Apr 25 00:05:11 2012 [LCM][I]: New VM state is PROLOG.
>> Wed Apr 25 00:05:17 2012 [TM][I]: clone: Cloning
>> ../../1/cfb778816ca91644bf82a8222a38f5ae in
>> node01:/srv/cloud/one/var//datastores/0/51/dis
>> k.0
>> Wed Apr 25 00:05:17 2012 [TM][I]: ExitCode: 0
>> Wed Apr 25 00:05:18 2012 [TM][I]: context: Generating context block
>> device at node01:/srv/cloud/one/var//datastores/0/51/disk.1
>> Wed Apr 25 00:05:18 2012 [TM][I]: ExitCode: 0
>> Wed Apr 25 00:05:18 2012 [LCM][I]: New VM state is BOOT
>> Wed Apr 25 00:05:18 2012 [VMM][I]: Generating deployment file:
>> /srv/cloud/one/var/51/deployment.0
>> Wed Apr 25 00:05:24 2012 [VMM][I]: ExitCode: 0
>> Wed Apr 25 00:05:24 2012 [VMM][I]: Successfully execute network driver
>> operation: pre.
>> Wed Apr 25 00:05:55 2012 [VMM][I]: Command execution fail: cat << EOT |
>> /var/tmp/one/vmm/kvm/deploy /srv/cloud/one/var//datastores/0/51/dep
>> loyment.0 node01 51 node01
>> Wed Apr 25 00:05:55 2012 [VMM][I]: error: Failed to create domain from
>> /srv/cloud/one/var//datastores/0/51/deployment.0
>> Wed Apr 25 00:05:55 2012 [VMM][I]: error: internal error process exited
>> while connecting to monitor: kvm: -drive file=/srv/cloud/one/var//d
>> atastores/0/51/disk.0,if=none,id=drive-ide0-0-0,format=raw: could not
>> open disk image /srv/cloud/one/var//datastores/0/51/disk.0: Permissio
>> n denied
>> Wed Apr 25 00:05:55 2012 [VMM][I]:
>> Wed Apr 25 00:05:55 2012 [VMM][E]: Could not create domain from
>> /srv/cloud/one/var//datastores/0/51/deployment.0
>> Wed Apr 25 00:05:55 2012 [VMM][I]: ExitCode: 255
>> Wed Apr 25 00:05:55 2012 [VMM][I]: Failed to execute virtualization
>> driver operation: deploy.
>> Wed Apr 25 00:05:55 2012 [VMM][E]: Error deploying virtual machine: Could
>> not create domain from /srv/cloud/one/var//datastores/0/51/deploy
>> ment.0
>> Wed Apr 25 00:05:55 2012 [DiM][I]: New VM state is FAILED
>>
>> I know it is something to relating to libvirt or qemu but just couldn't
>> pin point the fault.
>>
>> Regards
>> Beh
>>
>>
>> 2012/4/24 Carlos Martín Sánchez <cmartin at opennebula.org>
>>
>>> Hi,
>>>
>>> Are you using the shared TM driver [1] in your system datastore? If so,
>>> please check that the datastore directory is properly exported, and that
>>> files created in the front-end have the correct permissions so the oneadmin
>>> account in the host can see them.
>>>
>>> Regards
>>>
>>> [1] http://opennebula.org/documentation:rel3.4:system_ds
>>> --
>>> Carlos Martín, MSc
>>> Project Engineer
>>> OpenNebula - The Open-source Solution for Data Center Virtualization
>>> www.OpenNebula.org | cmartin at opennebula.org | @OpenNebula<http://twitter.com/opennebula><cmartin at opennebula.org>
>>>
>>>
>>>
>>> On Sun, Apr 22, 2012 at 6:43 AM, Teik Hooi Beh <thbeh at thbeh.com> wrote:
>>>
>>>> Hi,
>>>>
>>>> I have just started with opennebula and have manage to setup a test lab
>>>> with 2 servers (following the guide from
>>>> http://cloudblab.wordpress.com/) minus the window image deployment. I
>>>> have tried to test with ttylinux  using instruction VM sample with Context
>>>> & Network 3.4 from open nebula web site.
>>>>
>>>> Image was properly registered with rdy state but when I tried to deploy
>>>> the VM i got the following message:
>>>>
>>>>
>>>> Sun Apr 22 12:32:52 2012 [DiM][I]: New VM state is ACTIVE.
>>>> Sun Apr 22 12:32:52 2012 [LCM][I]: New VM state is PROLOG.
>>>> Sun Apr 22 12:32:53 2012 [TM][I]: clone: Cloning ../../1/cfb778816ca91644bf82a8222a38f5ae in node01:/srv/cloud/one/var//datastores/0/26/disk.0
>>>> Sun Apr 22 12:32:53 2012 [TM][I]: ExitCode: 0
>>>> Sun Apr 22 12:32:54 2012 [TM][I]: context: Generating context block device at node01:/srv/cloud/one/var//datastores/0/26/disk.1
>>>> Sun Apr 22 12:32:54 2012 [TM][I]: ExitCode: 0
>>>> Sun Apr 22 12:32:54 2012 [LCM][I]: New VM state is BOOT
>>>> Sun Apr 22 12:32:54 2012 [VMM][I]: Generating deployment file: /srv/cloud/one/var/26/deployment.0
>>>> Sun Apr 22 12:32:54 2012 [VMM][I]: ExitCode: 0
>>>> Sun Apr 22 12:32:54 2012 [VMM][I]: Successfully execute network driver operation: pre.
>>>> Sun Apr 22 12:32:56 2012 [VMM][I]: Command execution fail: cat << EOT | /var/tmp/one/vmm/kvm/deploy /srv/cloud/one/var//datastores/0/26/deployment.0 node01 26 node01
>>>> Sun Apr 22 12:32:56 2012 [VMM][I]: error: Failed to create domain from /srv/cloud/one/var//datastores/0/26/deployment.0
>>>> Sun Apr 22 12:32:56 2012 [VMM][I]: error: unable to open disk path /srv/cloud/one/var//datastores/0/26/disk.0: Permission deniedSun Apr 22 12:32:56 2012 [VMM][E]: Could not create domain from /srv/cloud/one/var//datastores/0/26/deployment.0
>>>> Sun Apr 22 12:32:56 2012 [VMM][I]: ExitCode: 255
>>>> Sun Apr 22 12:32:56 2012 [VMM][I]: Failed to execute virtualization driver operation: deploy.Sun Apr 22 12:32:56 2012 [VMM][E]: Error deploying virtual machine: Could not create domain from /srv/cloud/one/var//datastores/0/26/deployment.0
>>>> Sun Apr 22 12:32:56 2012 [DiM][I]: New VM state is FAILED
>>>>
>>>> As I am new, i am not sure where to start debugging to find out what is
>>>> wrong. Any advice?
>>>>
>>>> Thanks
>>>> Beh
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at lists.opennebula.org
>>>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>>>
>>>>
>>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.opennebula.org
>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>
>>
>>
>>
>>
>>
>>
>>
>
> _______________________________________________
> Users mailing list
> Users at lists.opennebula.org
> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20120427/d3758dfb/attachment-0003.htm>


More information about the Users mailing list