[one-users] scheduler deploy problem

antoni artigues tartigues at iac3.eu
Mon Mar 28 06:18:55 PDT 2011


Hi,

No, I have added this lines but the error is still appearing:

--------------------
Mon Mar 28 15:00:02 2011 [InM][I]: Command execution
fail: /srv/cloud/one/lib/remotes/im/run_probes vmware oscarnode7
Mon Mar 28 15:00:02 2011 [InM][I]: STDERR follows.
Mon Mar 28 15:00:02 2011 [InM][I]: ./vmware.rb:11:in `require': no such
file to load -- OpenNebula (LoadError)
Mon Mar 28 15:00:02 2011 [InM][I]: from ./vmware.rb:11
Mon Mar 28 15:00:02 2011 [InM][I]: Error executing vmware.rb
Mon Mar 28 15:00:02 2011 [InM][I]: ExitCode: 1
Mon Mar 28 15:00:02 2011 [InM][E]: Error monitoring host 3 : MONITOR
FAILURE 3 Could not monitor host oscarnode7.
----------------------

And I have the ONE_LOCATION env defined in my sistem.

Thanks in advance

El lun, 28-03-2011 a las 14:53 +0200, Tino Vazquez escribió:
> Hi,
> 
> Please try adding the following after the first line of vmware.rb:
> 
> --
> ONE_LOCATION=ENV["ONE_LOCATION"]
> 
> if !ONE_LOCATION
>     RUBY_LIB_LOCATION="/usr/lib/one/ruby"
> else
>     RUBY_LIB_LOCATION=ONE_LOCATION+"/lib/ruby"
> end
> 
> 
> $: << RUBY_LIB_LOCATION
> --
> 
> If this works, I will add it to the next vmware addon release.
> 
> Regards,
> 
> -Tino
> 
> --
> Constantino Vázquez Blanco, MSc
> OpenNebula Major Contributor
> www.OpenNebula.org | @tinova79
> 
> 
> 
> On Mon, Mar 28, 2011 at 1:43 PM, antoni artigues <tartigues at iac3.eu> wrote:
> > Hello
> >
> > I'm trying to apply the patch, but I obtain this error:
> >
> > Mon Mar 28 13:29:09 2011 [InM][I]: STDERR follows.
> > Mon Mar 28 13:29:09 2011 [InM][I]: ./vmware.rb:2:in `require': no such
> > file to load -- OpenNebula (LoadError)
> >
> >
> > I have attached the vmware.rb modified
> >
> > Thanks in advance
> >
> > Antoni Artigues
> > El vie, 25-03-2011 a las 13:49 +0100, Tino Vazquez escribió:
> >> Hi,
> >>
> >> Please ignore my last email, this is the correct ticket i was
> >> referring to: http://dev.opennebula.org/issues/481
> >>
> >> Regards,
> >>
> >> -Tino
> >>
> >> --
> >> Constantino Vázquez Blanco, MSc
> >> OpenNebula Major Contributor
> >> www.OpenNebula.org | @tinova79
> >>
> >>
> >>
> >> On Fri, Mar 25, 2011 at 1:33 PM, Tino Vazquez <tinova at opennebula.org> wrote:
> >> > Hi,
> >> >
> >> > Please apply the patch uploaded to this ticket [1], and see if the
> >> > error still shows up.
> >> >
> >> > Regards,
> >> >
> >> > -Tino
> >> >
> >> > [1] http://dev.opennebula.org/issues/541
> >> >
> >> > --
> >> > Constantino Vázquez Blanco, MSc
> >> > OpenNebula Major Contributor
> >> > www.OpenNebula.org | @tinova79
> >> >
> >> >
> >> >
> >> > On Tue, Mar 22, 2011 at 12:18 PM, antoni artigues <tartigues at iac3.eu> wrote:
> >> >> Hi
> >> >>
> >> >> I send you the logs. The vm.log is from vm 71:
> >> >>
> >> >> ---------------
> >> >> $ onehost list
> >> >>  ID NAME              CLUSTER  RVM   TCPU   FCPU   ACPU    TMEM    FMEM
> >> >> STAT
> >> >>   0 oscarnode4        default    2    400    400    400    7.8G      0K
> >> >> on
> >> >>   3 oscarnode7        default    6    400    400    400    7.8G      0K
> >> >> on
> >> >> -----------------
> >> >> $ onevm list
> >> >>   ID     USER     NAME STAT CPU     MEM        HOSTNAME        TIME
> >> >>   57 oneadmin ubuntuVM runn   0      0K      oscarnode7 14 23:32:16
> >> >>   58 oneadmin ubuntuVM runn   0      0K      oscarnode7 14 23:13:14
> >> >>   59 oneadmin ubuntuVM runn   0      0K      oscarnode7 14 22:22:39
> >> >>   60 oneadmin ubuntuVM runn   0      0K      oscarnode7 14 21:29:49
> >> >>   67 oneadmin ubuntuVM runn   0      0K      oscarnode4 14 02:11:44
> >> >>   68 oneadmin ubuntuVM runn   0      0K      oscarnode4 14 01:28:37
> >> >>   69 oneadmin ubuntuVM runn   0      0K      oscarnode7 00 01:08:45
> >> >>   70 oneadmin ubuntuVM runn   0      0K      oscarnode7 00 00:47:32
> >> >>   71 oneadmin ubuntuVM fail   0      0K      oscarnode7 00 00:17:18
> >> >> -----------------
> >> >>
> >> >> Thanks in advance
> >> >>
> >> >> Regards
> >> >>
> >> >> Antoni Artigues
> >> >>
> >> >> El vie, 18-03-2011 a las 17:15 +0100, Tino Vazquez escribió:
> >> >>> Hi,
> >> >>>
> >> >>> Could you please send through the template of one VM and its log
> >> >>> ($ONE_LOCATION/var/<vid>/vm.log)?
> >> >>>
> >> >>> Also $ONE_LOCATION/var/sched.log and $ONE_LOCATION/var/oned.log would
> >> >>> be useful. You can send this off the list if there is a concern about
> >> >>> privacy.
> >> >>>
> >> >>> Regards,
> >> >>>
> >> >>> -Tino
> >> >>>
> >> >>> --
> >> >>> Constantino Vázquez Blanco | dsa-research.org/tinova
> >> >>> Virtualization Technology Engineer / Researcher
> >> >>> OpenNebula Toolkit | opennebula.org
> >> >>>
> >> >>>
> >> >>>
> >> >>> On Mon, Mar 7, 2011 at 10:40 AM, antoni artigues <tartigues at iac3.eu> wrote:
> >> >>> > Hello
> >> >>> >
> >> >>> > I have 4 hosts registered:
> >> >>> >
> >> >>> > $ onehost list
> >> >>> >  ID NAME              CLUSTER  RVM   TCPU   FCPU   ACPU    TMEM    FMEM
> >> >>> > STAT
> >> >>> >   0 oscarnode4        default    1    400    400    400    7.8G      0K
> >> >>> > on
> >> >>> >   1 oscarnode5        default    1    400    400    400    7.8G      0K
> >> >>> > on
> >> >>> >   2 oscarnode6        default    3    400    400    400    7.8G      0K
> >> >>> > on
> >> >>> >   3 oscarnode7        default    4    400    400    400    7.8G      0K
> >> >>> > on
> >> >>> >
> >> >>> > Each one With 7.8G of RAM
> >> >>> >
> >> >>> > I create 9 virtual machines. Each of one with 1 cpu and 1792MB of ram:
> >> >>> > ------------------------------
> >> >>> > NAME="ubuntuVM"
> >> >>> > VCPU = 1
> >> >>> > MEMORY = 1792
> >> >>> > OS = [ ARCH = "i686" ]
> >> >>> > DISK=[IMAGE="vmimage",
> >> >>> >      TARGET="sda",
> >> >>> >      BUS="scsi"]
> >> >>> > NIC=[NETWORK="vmware LAN bridged"]
> >> >>> > ------------------------------
> >> >>> >
> >> >>> > There are 4 running machines on "oscarnode7" host.
> >> >>> >
> >> >>> > When I create more virtual machines the scheduler sends it to the
> >> >>> > "oscarnode7". But it doen't start because there is no more available RAM
> >> >>> > on this host.
> >> >>> >
> >> >>> > If I create more machines, always the scheduler sends it to the same
> >> >>> > host!!!
> >> >>> >
> >> >>> > Why the scheduler are not asigning another host? For example,
> >> >>> > "oscarnode4" is only running one virtual machine
> >> >>> >
> >> >>> >
> >> >>> > This is the virtual machines distribution after creating a new virtual
> >> >>> > machine:
> >> >>> >
> >> >>> >  onevm list
> >> >>> >   ID     USER     NAME STAT CPU     MEM        HOSTNAME        TIME
> >> >>> >   38 oneadmin ubuntuVM runn   0      0K      oscarnode7 02 19:04:46
> >> >>> >   39 oneadmin ubuntuVM runn   0      0K      oscarnode7 02 18:42:19
> >> >>> >   40 oneadmin ubuntuVM runn   0      0K      oscarnode7 02 18:24:08
> >> >>> >   42 oneadmin ubuntuVM runn   0      0K      oscarnode6 02 18:07:58
> >> >>> >   43 oneadmin ubuntuVM runn   0      0K      oscarnode5 02 18:07:51
> >> >>> >   44 oneadmin ubuntuVM runn   0      0K      oscarnode4 02 18:07:43
> >> >>> >   46 oneadmin ubuntuVM runn   0      0K      oscarnode6 02 18:06:43
> >> >>> >   51 oneadmin ubuntuVM runn   0      0K      oscarnode6 02 17:58:05
> >> >>> >   53 oneadmin ubuntuVM prol   0      0K      oscarnode7 00 00:00:43
> >> >>> >
> >> >>> > Thanks in advance
> >> >>> >
> >> >>> > Antoni Artigues
> >> >>> >
> >> >>> > _______________________________________________
> >> >>> > Users mailing list
> >> >>> > Users at lists.opennebula.org
> >> >>> > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
> >> >>> >
> >> >>
> >> >>
> >> >> _______________________________________________
> >> >> Users mailing list
> >> >> Users at lists.opennebula.org
> >> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
> >> >>
> >> >>
> >> >
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users at lists.opennebula.org
> > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
> >
> >





More information about the Users mailing list