[one-users] Errors scons compiling
Oriana Ottaviano
oriana6 at gmail.com
Thu Jun 23 07:36:39 PDT 2011
Hi Damien,
I get no errors during installation phase, but I cannot yet give feedback
about runtime phase, I'll let you know asap.
Thanks and kind regards,
Oriana
2011/6/23 Damien Raude-Morvan <drazzib at drazzib.com>
> Oriana,
>
> Since you seems to have "src/nebula/oned" and
> "src/scheduler/src/sched/mm_sched" binaries, I think you can ignore those
> errors.
> AFAIK, Opennebula build system (scons) has been customized to check
> sequentially for multiple build strategy (so that you can build OpenNebula
> on
> Linux, MacOS X or any *BSD).
>
> Did you have any error during installation phase or at runtime ?
>
> PS: please keep users at lists.opennebula.org as To: or CC: of your mails so
> everyone can benefit from our exchanges.
>
> On Thu, 23 Jun 2011 14:42:50 +0200, Oriana Ottaviano <oriana6 at gmail.com>
> wrote:
> > Hi Damien I've also found src/scheduler/src/sched/mm_sched.
> >
> >
> > 2011/6/23 Oriana Ottaviano <oriana6 at gmail.com>
> >
> >> Hi, thanks for your quick reply.
> >> I've checked and I've found src/nebula/oned, but there is no
> >> src/scheduler/src/sched/mm_sched.
> >>
> >> Following there are the requested outputs:
> >>
> >>
> >> - gcc -v ; dpkg -l "gcc*"
> >>
> >> Using built-in specs.
> >> Target: i486-linux-gnu
> >> Configured with: ../src/configure -v --with-pkgversion='Ubuntu
> >> 4.4.3-4ubuntu5' --with-bugurl=file:///usr/share/doc/gcc-4.4/README.Bugs
> >> --enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr
> >> --enable-shared
> >> --enable-multiarch --enable-linker-build-id --with-system-zlib
> >> --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix
> >> --with-gxx-include-dir=/usr/include/c++/4.4 --program-suffix=-4.4
> >> --enable-nls --enable-clocale=gnu --enable-libstdcxx-debug
> >> --enable-plugin
> >> --enable-objc-gc --enable-targets=all --disable-werror
> >> --with-arch-32=i486
> >> --with-tune=generic --enable-checking=release --build=i486-linux-gnu
> >> --host=i486-linux-gnu --target=i486-linux-gnu
> >> Thread model: posix
> >> gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5)
> >> Desired=Unknown/Install/Remove/Purge/Hold
> >> |
> >>
>
> Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend
> >> |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
> >> ||/ Nome
> >> Versione Descrizione
> >>
> >>
>
> +++-======================================-======================================-============================================================================================
> >> ii gcc
> >> 4:4.4.3-1ubuntu1 The GNU C compiler
> >> ii gcc-4.4
> >> 4.4.3-4ubuntu5 The GNU C compiler
> >> ii gcc-4.4-base
> >> 4.4.3-4ubuntu5 The GNU Compiler Collection
> (base
> >> package)
> >> un gcc-4.4-doc <non
> >> definita> (nessuna descrizione disponibile)
> >> un gcc-4.4-locales <non
> >> definita> (nessuna descrizione disponibile)
> >> un gcc-4.4-multilib <non
> >> definita> (nessuna descrizione disponibile)
> >> un gcc-doc <non
> >> definita> (nessuna descrizione disponibile)
> >> un gcc-multilib <non
> >> definita> (nessuna descrizione disponibile)
> >>
> >>
> >>
> >>
> >> - ld -v ; dpkg -l "binutils*"
> >>
> >> GNU ld (GNU Binutils for Ubuntu) 2.20.1-system.20100303
> >> Desired=Unknown/Install/Remove/Purge/Hold
> >> |
> >>
>
> Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend
> >> |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
> >> ||/ Nome
> >> Versione Descrizione
> >>
> >>
>
> +++-======================================-======================================-============================================================================================
> >> ii binutils
> >> 2.20.1-3ubuntu7 The GNU assembler, linker and
> >> binary
> >> utilities
> >> un binutils-doc <non
> >> definita> (nessuna descrizione disponibile)
> >> un binutils-gold <non
> >> definita> (nessuna descrizione disponibile)
> >>
> >>
> >>
> >> - xmlrpc-c-config --version
> >>
> >> 1.06.27
> >>
> >>
> >> Thanks again.
> >> Cheers,
> >> Oriana.
> >>
> >>
> >>
> >>
> >>
> >> 2011/6/23 Damien Raude-Morvan <drazzib at drazzib.com>
> >>
> >>> On Thu, 23 Jun 2011 13:35:30 +0200, Oriana Ottaviano
> <oriana6 at gmail.com>
> >>> wrote:
> >>> > Hello everyone,
> >>>
> >>> Hi,
> >>>
> >>> > I'm trying to install the front-end of OpenNebula 2.2, using Ubuntu
> >>> 10.04.
> >>> > When I try to compile by scons, the procedure ends with a successful
> >>> > message but I get the following errors:
> >>> >
> >>> > Testing recipe: pkg-config
> >>> [...]
> >>> > At the end I can read:
> >>> >
> >>> > scons: done reading SConscript files.
> >>> > scons: Building targets ...
> >>> > scons: `.' is up to date.
> >>> > scons: done building targets.
> >>>
> >>> Did you have a "src/nebula/oned" or "src/scheduler/src/sched/mm_sched"
> >>> binaries ?
> >>>
> >>> > I've checked the xmlrpc version, getting 1.06.27.
> >>> > The output of the command xmlrpc-c-config c++2 client --libs
> --cflags
> >>> > is
> >>> > shown below:
> >>> > -L/usr/lib -lxmlrpc_client++ -lcurl -lxmlrpc_client -lxmlrpc++
> >>> > -lxmlrpc
> >>> > -lxmlrpc_util -lxmlrpc_xmlparse -lxmlrpc_xmltok -Wl,--rpath
> >>> > -Wl,/usr/lib
> >>> > -I/usr/include
> >>> > Furthermore there are no error messages in the log files under the
> >>> > .xmlrpc_test directory.
> >>> >
> >>> > Please could you help me to solve the compiling errors? Anyway can I
> >>> > proceed with the installation?
> >>>
> >>> Could you please provide output of :
> >>> 1) gcc -v ; dpkg -l "gcc*"
> >>> 3) ld -v ; dpkg -l "binutils*"
> >>> 3) xmlrpc-c-config --version
> >>>
> >>> Cheers,
> >>> --
> >>> Damien
> >>> _______________________________________________
> >>> Users mailing list
> >>> Users at lists.opennebula.org
> >>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
> >>>
> >>
> >>
>
> --
> Damien
> _______________________________________________
> Users mailing list
> Users at lists.opennebula.org
> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20110623/959186ba/attachment-0002.htm>
More information about the Users
mailing list