[one-users] Yet another problem with connecting to ttylinux via ssh
Adnan Pasic
pasic at informatik.uni-wuerzburg.de
Mon Jun 6 03:14:16 PDT 2011
Hi,
sorry for the late response! Here are the config-infos you wanted:
nebula at nebula2:~$ brctl show
bridge name bridge id STP enabled interfaces
virbr0 8000.fe00c0a80005 yes vnet0
nebula at nebula2:~$ netstat -nr
Kernel-IP-Routentabelle
Ziel Router Genmask Flags MSS Fenster
irtt Iface
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0
0 eth0
192.168.122.0 0.0.0.0 255.255.255.0 U 0 0
0 virbr0
0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0
0 eth0
Any idea? I would like my VM to have the IP from the same subnet as the
original PC...
Regards
On Wed, 1 Jun 2011 17:45:26 +0200, Javier Fontan wrote:
> Can you send us the configuration of bridges and routes from your
> physical host?
>
> brctl show
> netstat -nr
>
> On Tue, May 31, 2011 at 3:18 PM, Adnan Pasic <pqado at yahoo.de> wrote:
>> OK, the problem with the vncviewer was yet another beginners'
>> mistake. I am
>> now able to log into the ttylinux-VM and perform a "ifconfig".
>> Here's what I
>> get:
>> eth0 Link encap:Ethernet Hardware Adresse 02:00:C0:A8:00:05
>> inet Adresse:192.168.0.5 Bcast:192.168.0.255
>> Maske:255.255.255.0
>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1
>> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>> TX packets:321 errors:0 dropped:0 overruns:0 carrier:0
>> Kollisionen:0 Sendewarteschlangenlänge:1000
>> RX bytes:0 (0.0 B) TX bytes:19260 (18.8 KB)
>> Interrupt:11 Basisadresse: 0xc100
>>
>> lo Link encap:Lokale Schleife
>> inet Adresse:127.0.0.1 Maske:255.0.0.0
>> UP LOOPBACK RUNNING MTU:16436 Metrik:1
>> RX packets:320 errors:0 dropped:0 overruns:0 frame:0
>> TX packets:320 errors:0 dropped:0 overruns:0 carrier:0
>> Kollisionen:0 Sendewarteschlangenlänge:0
>> RX bytes:35840 (35.0 KB) TX bytes:35840 (35.0 KB)
>> And still I can't ping whether the host PC (192.168.0.3), nor the
>> ONE-frontend (192.168.0.1). Obviously it's some kind of
>> virtual-network
>> configuration issue. However, strangely the migration and
>> suspend/resume
>> etc. are working, but only the ping won't do!
>>
>> ________________________________
>> Von: Adnan Pasic <pqado at yahoo.de>
>> An: "users at lists.opennebula.org" <users at lists.opennebula.org>
>> Gesendet: 12:13 Dienstag, 31.Mai 2011
>> Betreff: [one-users] Yet another problem with connecting to ttylinux
>> via ssh
>>
>> Hello,
>> I've been trying to enter my ttylinux-VM from the tutorial, but
>> somehow the
>> connection just cant be established. Every time I get a "no route to
>> host"
>> error, when I try the various IP's. First of all, here are my
>> ifconfig data,
>> after the VM has been created:
>> eth0 Link encap:Ethernet Hardware Adresse 00:19:99:03:b0:3e
>> inet Adresse:192.168.0.3 Bcast:192.168.0.255
>> Maske:255.255.255.0
>> inet6-Adresse: fe80::219:99ff:fe03:b03e/64
>> Gültigkeitsbereich:Verbindng
>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1
>> RX packets:21659 errors:0 dropped:0 overruns:0 frame:0
>> TX packets:10582 errors:0 dropped:0 overruns:0 carrier:0
>> Kollisionen:0 Sendewarteschlangenlänge:1000
>> RX bytes:31304320 (31.3 MB) TX bytes:776923 (776.9 KB)
>> Interrupt:17
>>
>> lo Link encap:Lokale Schleife
>> inet Adresse:127.0.0.1 Maske:255.0.0.0
>> inet6-Adresse: ::1/128 Gültigkeitsbereich:Maschine
>> UP LOOPBACK RUNNING MTU:16436 Metrik:1
>> RX packets:70 errors:0 dropped:0 overruns:0 frame:0
>> TX packets:70 errors:0 dropped:0 overruns:0 carrier:0
>> Kollisionen:0 Sendewarteschlangenlänge:0
>> RX bytes:5584 (5.5 KB) TX bytes:5584 (5.5 KB)
>>
>> virbr0 Link encap:Ethernet Hardware Adresse fe:00:c0:a8:00:06
>> inet Adresse:192.168.122.1 Bcast:192.168.122.255
>> Maske:255.255.255.0
>> inet6-Adresse: fe80::a8e2:ff:fe60:a424/64
>> Gültigkeitsbereich:Verbindugn
>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1
>> RX packets:5 errors:0 dropped:0 overruns:0 frame:0
>> TX packets:30 errors:0 dropped:0 overruns:0 carrier:0
>> Kollisionen:0 Sendewarteschlangenlänge:0
>> RX bytes:230 (230.0 B) TX bytes:5750 (5.7 KB)
>>
>> vnet0 Link encap:Ethernet Hardware Adresse fe:00:c0:a8:00:06
>> inet6-Adresse: fe80::fc00:c0ff:fea8:6/64
>> Gültigkeitsbereich:Verbindun UP BROADCAST RUNNING
>> MULTICAST
>> MTU:1500 Metrik:1
>> RX packets:5 errors:0 dropped:0 overruns:0 frame:0
>> TX packets:17 errors:0 dropped:0 overruns:0 carrier:0
>> Kollisionen:0 Sendewarteschlangenlänge:500
>> RX bytes:300 (300.0 B) TX bytes:1040 (1.0 KB)
>>
>>
>> The VM has been created with the IP 192.168.0.5, but when I try to
>> ssh onto
>> it, I get the above mentioned error. Strangely, when I perform a
>> "sudo
>> vncviewer localhost:6789" I get the screen of the VM, but can't also
>> do
>> anything in it. I try to type in the password, but no keystrokes get
>> taken
>> over and the vncviewer screen looks more like just a screenshot
>> through
>> which I can scroll up and down.
>> This is my network-configuration:
>> NAME = "Small Network"
>> TYPE = FIXED
>> BRIDGE = virbr0
>> LEASES = [IP=192.168.0.5]
>>
>> Anyone got an idea???
>> Thanks!
>> _______________________________________________
>> Users mailing list
>> Users at lists.opennebula.org
>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.opennebula.org
>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>
>>
>
>
>
> --
> Javier Fontan, Grid & Virtualization Technology Engineer/Researcher
> DSA Research Group: http://dsa-research.org
> Globus GridWay Metascheduler: http://www.GridWay.org
> OpenNebula Virtual Infrastructure Engine: http://www.OpenNebula.org
> _______________________________________________
> Users mailing list
> Users at lists.opennebula.org
> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
More information about the Users
mailing list