[one-users] Trouble with VMWare installation and configuration with vmware support
Juan José Fuentes
Juanjose.Fuentes at sigmaaie.org
Mon Jul 18 05:30:50 PDT 2011
Hi Carlos,
Thank you, I've changed the URI, but the the error still.
I've found a test on the Web using the command VIRSH, so I've executed the command:
oneadmin at sigcloud01:/etc/one$ virsh gsx://sigcloud02.sigmaaie.org?no_verify=1
virsh: error while loading shared libraries: libvirt-qemu.so.0: cannot open shared object file: No such file or directory
Where should be those libraries? Where should I indicate the location of the libraries?
[Descripción: Descripción: Descripción: http://www.gestionuniversitariasigma.com/images/sigma_logoFirma.png]
Juan José Fuentes
Responsable de Sistemas
Telf +34 902 550 733
[Descripción: Descripción: Descripción: http://www.gestionuniversitariasigma.com/images/sigma_barraFirma.png]
De: users-bounces at lists.opennebula.org [mailto:users-bounces at lists.opennebula.org] En nombre de Carlos A.
Enviado el: lunes, 18 de julio de 2011 14:10
Para: users at lists.opennebula.org
Asunto: Re: [one-users] Trouble with VMWare installation and configuration with vmware support
Hello,
if you are using VMWare Server, you should change the LIBVIRT_URI to
LIBVIRT_URI = "gsx://@HOST@/?no_verify=1"
Regards,
Carlos A.
El 18/07/11 13:37, Juan José Fuentes escribió:
Hi Tino,
I have change the the vmwarerc file setting the creditals, then I rebooted OpenNebula, but the error still.
The file vmwarerc is right now:
# User configurable variables (Ruby syntax)
LIBVIRT_URI = "esx://@HOST@/?no_verify=1"
QEMU_PROTOCOL = "qemu"
# Username and password of the VMware hypervisor
USERNAME = "oneadmin"
PASSWORD = "mypassword"
# Loading the vmware library for mads
# Please leave this uncommented
load ENV['ONE_LOCATION'] + "/lib/ruby/vmwarelib.rb"
ENV['LANG']='C'
Is everything ok?
[Descripción: Descripción: Descripción: http://www.gestionuniversitariasigma.com/images/sigma_logoFirma.png]
Juan José Fuentes
Responsable de Sistemas
Telf +34 902 550 733
[Descripción: Descripción: Descripción: http://www.gestionuniversitariasigma.com/images/sigma_barraFirma.png]
De: tinova79 at gmail.com<mailto:tinova79 at gmail.com> [mailto:tinova79 at gmail.com] En nombre de Tino Vazquez
Enviado el: lunes, 18 de julio de 2011 12:17
Para: Juan José Fuentes
CC: users at lists.opennebula.org<mailto:users at lists.opennebula.org>
Asunto: Re: [one-users] Trouble with VMWare installation and configuration with vmware support
Hi Juan,
Yes, you need to install VMware Server on the nodes.
About the error, did you edit $ONE_LOCATION/etc/vmwarerc accordingly? You need to set the credentials of the VMware Server at least.
Regards,
-Tino
--
Constantino Vázquez Blanco | dsa-research.org/tinova<http://dsa-research.org/tinova>
Virtualization Technology Engineer / Researcher
OpenNebula Toolkit | opennebula.org<http://opennebula.org>
2011/7/15 Juan José Fuentes <Juanjose.Fuentes at sigmaaie.org<mailto:Juanjose.Fuentes at sigmaaie.org>>
Hi all,
I'm starting configuring OpenNebula and I'm getting some trouble, both trying to configure it right and finding documentation, mostly because I want to use it with vmware support to still using the vmware server virtual machines I already have, at least I hope I could do that, if that's not possible I'll stop using OpenNebula.
Until now I have installed OpenNebula 2.2 on a server (sigcloud01), in this server I've installed libvirt and the vmware extension (vmware-2.2.0.tar.gz). Also I have one host node (sigcloud02) on which I've installed VMWare Server 2.0.2. According to the posts/docs I read I think it's necessary to install vmware server on the client node or it isn't, so I'm not sure.
I also have installed SunStone on the OpenNebula Server.
At this point when I add a host to opennebula it always is in ERR status.
The command I use is: onehost create sigcloud02 im_vmware vmm_vmware tm_vmware
The oned.log says:
Fri Jul 15 17:55:11 2011 [ReM][D]: HostAllocate method invoked
Fri Jul 15 17:55:18 2011 [ReM][D]: HostPoolInfo method invoked
Fri Jul 15 17:55:18 2011 [InM][I]: Monitoring host sigcloud02 (2)
Fri Jul 15 17:55:18 2011 [ReM][D]: VirtualMachinePoolInfo method invoked
Fri Jul 15 17:55:18 2011 [InM][I]: Command execution fail: /var/lib/one/remotes/im/run_probes vmware sigcloud02
Fri Jul 15 17:55:18 2011 [InM][I]: STDERR follows.
Fri Jul 15 17:55:18 2011 [InM][I]: ./vmware.rb:61: undefined method `+' for nil:NilClass (NoMethodError)
Fri Jul 15 17:55:18 2011 [InM][I]: Error executing vmware.rb
Fri Jul 15 17:55:18 2011 [InM][I]: ExitCode: 1
Fri Jul 15 17:55:18 2011 [InM][E]: Error monitoring host 2 : MONITOR FAILURE 2 Could not monitor host sigcloud02.
Some help will be wellcome!
Thank you in advance,
Juanjo.
De: users-bounces at lists.opennebula.org<mailto:users-bounces at lists.opennebula.org> [mailto:users-bounces at lists.opennebula.org<mailto:users-bounces at lists.opennebula.org>] En nombre de Amine Ghrab
Enviado el: miércoles, 06 de julio de 2011 12:12
Para: users at lists.opennebula.org<mailto:users at lists.opennebula.org>
Asunto: [one-users] OpenNebula OCCI 1.1
Hi,
I've successfully installed OpenNebula Express, for test purposes, using 2 machines.
Now I'm struggling to get the OCCI Server up following this wiki : http://dev.opennebula.org/projects/ogf-occi/wiki/Occi_02
and using this file: http://dev.opennebula.org/attachments/download/376/ogf-occi-0.2.zip
occi-server.conf and occi-one.conf are similar to : http://www.mail-archive.com/users@lists.opennebula.org/msg03257.html
occi-one.conf : http://pastebin.com/nAW16qpc
occi-server.conf : http://pastebin.com/tLpHB12K
When startin gthe server i get :
oneadmin at amine-front:~$occi-server start
Error executing /usr/lib/one/ruby/cloud/occi/occi-server.rb.
oneadmin at amine-front:~$ occi-server stop
occi-server stopped
The only line of the log is : Error starting server: No VM_TYPE defined.
The other problem is :
oneadmin at amine-frontend:~$ occi-compute --username oneadmin --password oneadmin list
Error connecting to server (Connection refused - connect(2)).
Server: localhost:4567
The installation is system wide, hence I have the following schema:
oneadmin at amine-front:~$ ls /etc/one/
auth im_kvm occi-server.conf tm_lvm
defaultrc im_xen occi-server.conf.old tm_nfs
ec2query_templates occi-one.conf occi-server.conf.orig tm_ssh
econe.conf occi-one.conf.old occi_templates vmm_ec2
hm occi_one_templates oned.conf vmm_sh
im_ec2 occi_one_templates.old tm_dummy vmm_ssh
Best Regards.
Amine
_______________________________________________
Users mailing list
Users at lists.opennebula.org<mailto:Users at lists.opennebula.org>
http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
_______________________________________________
Users mailing list
Users at lists.opennebula.org<mailto:Users at lists.opennebula.org>
http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20110718/87acefd3/attachment-0003.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 3763 bytes
Desc: image001.png
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20110718/87acefd3/attachment-0006.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 4169 bytes
Desc: image002.png
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20110718/87acefd3/attachment-0007.png>
More information about the Users
mailing list