[one-users] User couldn't be authenticated, aborting call.

Tue Feb 22 03:33:06 PST 2011

hum ok,

the one_auth file which is working just contain "oneadmin:<password>"....

Does that mean this file should be created manually for oneadmin and should
not be created using "oneauth login oneadmin"??

Cheers,

Chris.

2011/2/22 christophe bonnaud <takyon77 at gmail.com>

> Hi,
>
> It found a strange thing today:
>
> I installed opennebula from a yum repository, ie without using the source
> from the opennebula web site and it was working. With this installation, no
> need to create the file one_auth using "oneauth login oneadmin" because it
> is generated by the rpm itself.
>
> On the system which was not working, I stoped the opennebula services and
> deleted the one.db file and one_auth file.
> After that I just copied the one_auth file from the system working,
> restarted opennebula and the problem disappeared!
>
> So it seems that with the official version, doing the command "oneauth
> login oneadmin" do not generates the correct one_auth file...
>
> Does anyone have an idea why?
> Is it the correct command?
>
> Cheers,
>
> Chris.
>
>
> 2011/2/21 christophe bonnaud <takyon77 at gmail.com>
>
> Hi,
>>
>> I tried to reinstalled opennebula using oneadmin user, I made the
>> compilation from sources using scons.
>>
>> After that I did the following commands as oneadmin user:
>>
>> export RUBYLIB=/usr/lib/one/ruby/
>> export ONE_LOCATION=/etc/one
>> export ONE_XMLRPC="http://localhost:2633/RPC2"
>>  export PATH="/etc/one/bin:"$PATH
>>
>>  oneauth login oneadmin
>>
>> export ONE_AUTH=/home/oneadmin/.one/one_ssh
>>
>> one start
>>      oned and scheduler started
>>
>> onehost list
>>       Error: [HostPoolInfo] User couldn't be authenticated, aborting call.
>>
>> no files were existing before (sqlite db, conf, etc..), so no changes have
>> been done one "ssh_one" file after the first start of "one" daemon.
>>
>> in my sqlite db, I have the following:
>>
>> sqlite> select * from user_pool;
>> 0|oneadmin|23b2a94066e351bd18aa0d97db3d4a7b0cb98adb|1
>>
>>
>> I don't have any references to check if this information is correct.
>>
>> I tried to increase the log level in oned.conf but no usefull informations
>> appear there...
>>
>>
>> Cheers,
>>
>> Chris.
>>
>>
>>
>> 2011/2/21 Idafen Santana Pérez <idafensp at gmail.com>
>>
>> Hi,
>>>
>>> I was having almost the same problem and I solved it by reinstalling
>>> opennebula with the right sqlite support and compiling it (I used
>>> scons to install it from source) as oneadmin user.
>>>
>>> You should check your oneadmin user information at your sqlite db (or
>>> mysql).
>>>
>>> Hope it helps.
>>>
>>> Regards
>>> Idafen
>>>
>>> On Mon, Feb 21, 2011 at 12:02 PM, Tino Vazquez <tinova at opennebula.org>
>>> wrote:
>>> > Hi,
>>> >
>>> > The file pointed by ONE_AUTH when oned is first started sets the
>>> > username and password for the ID=0 account (the oneadmin account). If
>>> > this files changes, or the env variable shifts to point to another
>>> > file, you will get the could not authenticate error message.
>>> >
>>> > Regards,
>>> >
>>> > -Tino
>>> >
>>> > --
>>> > Constantino Vázquez Blanco, MSc
>>> > OpenNebula Major Contributor  / Cloud Researcher
>>> > www.OpenNebula.org | @tinova79
>>> >
>>> >
>>> >
>>> > On Mon, Feb 21, 2011 at 7:52 AM, christophe bonnaud <
>>> takyon77 at gmail.com> wrote:
>>> >> Hi Richard,
>>> >>
>>> >> Thanks a lot for your answer.
>>> >>
>>> >> I checked but on my system all process for opennebula are owned by the
>>> >> oneadmin user.
>>> >> I did a reinstallation of the server to have a self-contained
>>> installation
>>> >> so now all opennebula's files are owned by oneadmin user.
>>> >> Unfortunately the problem reappeared...
>>> >>
>>> >> I don't really know how to solve this problem. I did some research but
>>> it
>>> >> seems that this problem is not really common and I couldn't find any
>>> usefull
>>> >> informations.
>>> >>
>>> >> Can I ask you which ruby/opennebula version you are using? I am not
>>> sure
>>> >> it's rely to the problem but I have to consider all possibilities.
>>> >>
>>> >> Cheers,
>>> >>
>>> >> Chris.
>>> >>
>>> >>
>>> >> On Fri, Feb 18, 2011 at 5:17 PM, Whiffen, Richard
>>> >> <Richard_Whiffen at cable.comcast.com> wrote:
>>> >>>
>>> >>> Christophe,
>>> >>>
>>> >>> I'm new to OpenNebula, so I'm not sure if this will help or not.
>>>  When I
>>> >>> was getting started I had the same problems. For some reason when I
>>> would
>>> >>> do a 'sudo su - oneadmin' it would still use my (root) .ssh settings
>>> and
>>> >>> not the oneadmin user.  Worse, some processes would be started with
>>> UID
>>> >>> root rather than oneadmin.  I had to kill the schedule process as
>>> root, it
>>> >>> wouldn't quit on it's own, and chown the log files to oneadmin again.
>>> >>> After that, the ssh authentication issues went away.
>>> >>>
>>> >>> Rich
>>> >>>
>>> >>> --
>>> >>> Rich Whiffen
>>> >>> richard_whiffen at cable.comcast.com
>>> >>> AIM: richwhiffen
>>> >>> Yahoo: richwhiffen
>>> >>> Phone: 202-449-1312
>>> >>>
>>> >>>
>>> >>>
>>> >>> >
>>> >>> >Message: 4
>>> >>> >Date: Thu, 17 Feb 2011 08:42:58 -0800
>>> >>> >From: christophe bonnaud <takyon77 at gmail.com>
>>> >>> >To: Users at lists.opennebula.org
>>> >>> >Subject: [one-users] User couldn't be authenticated, aborting call.
>>> >>> >Message-ID:
>>> >>> >    <AANLkTikVG6yB=9Vi7Lv_gMpApHVFnbqTWswWZmrnU5d8 at mail.gmail.com>
>>> >>> >Content-Type: text/plain; charset="iso-8859-1"
>>> >>> >
>>> >>> >Hi,
>>> >>> >
>>> >>> >I have just installed opennebula ver 2.0.1-1.
>>> >>> >I have created a ssh key for oneadmin user, run the command:
>>> >>> >
>>> >>> >     oneauth login oneadmin
>>> >>> >
>>> >>> >and exported the variable:
>>> >>> >
>>> >>> >     export ONE_AUTH="/home/oneadmin/.one/one_ssh"
>>> >>> >
>>> >>> >I have correctly start oned using the command (as oneadmin user):
>>> >>> >
>>> >>> >     one start
>>> >>> >
>>> >>> >But now all commands I am trying fail with an error:
>>> >>> >
>>> >>> >     User couldn't be authenticated, aborting call.
>>> >>> >
>>> >>> >Did I miss something? is there an other step to do to allow oneadmin
>>> to
>>> >>> >issue some commands?
>>> >>> >
>>> >>> >Cheers,
>>> >>> >
>>> >>> >Christophe bonnaud.
>>> >>>
>>> >>> _______________________________________________
>>> >>> Users mailing list
>>> >>> Users at lists.opennebula.org
>>> >>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>> >>
>>> >>
>>> >>
>>> >> --
>>> >> ------------------------------------------------------
>>> >> Bonnaud Christophe
>>> >> GSDC
>>> >> Korea Institute of Science and Technology Information
>>> >> Fax. +82-42-869-0789
>>> >> Tel. +82-42-869-0660
>>> >> Mobile +82-10-4664-3193
>>> >>
>>> >> _______________________________________________
>>> >> Users mailing list
>>> >> Users at lists.opennebula.org
>>> >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>> >>
>>> >>
>>> > _______________________________________________
>>> > Users mailing list
>>> > Users at lists.opennebula.org
>>> > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
>>> >
>>>
>>
>>
>>
>> --
>> ------------------------------------------------------
>> Bonnaud Christophe
>> GSDC
>> Korea Institute of Science and Technology Information
>> Fax. +82-42-869-0789
>> Tel. +82-42-869-0660
>> Mobile +82-10-4664-3193
>>
>
>
>
> --
> ------------------------------------------------------
> Bonnaud Christophe
> GSDC
> Korea Institute of Science and Technology Information
> Fax. +82-42-869-0789
> Tel. +82-42-869-0660
> Mobile +82-10-4664-3193
>

-- 
------------------------------------------------------
Bonnaud Christophe
GSDC
Korea Institute of Science and Technology Information
Fax. +82-42-869-0789
Tel. +82-42-869-0660
Mobile +82-10-4664-3193
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20110222/8845225d/attachment-0003.htm>