[one-users] Fwd: Register VM for ESX 4.1
Jonathan Kelley
jkelley at vm-labs.com
Thu Sep 16 05:39:51 PDT 2010
Hi Tino,
There is a .vmx file resident in the WinXP_32bit_Dev folder but I didn't
specify a full path for the disk attribute. If I specify the full path then
the same problem occurs.
Is it possible that the cp -r fails?
Thanks,
Jon
On Wed, Sep 15, 2010 at 7:35 AM, Tino Vazquez <tinova at fdi.ucm.es> wrote:
> Hi Jonathan,
>
> This is the piece of code that is failing
>
> ---
> VM_ID=`echo $DST | $SED -e 's/.*\/\([0-9]\+\)\/images\/.*/\1/'`
> cp -r $SRC_PATH $DATASTORE_PATH/one-$VM_ID &>/dev/null
> mv $DATASTORE_PATH/one-$VM_ID/*.vmx
> $DATASTORE_PATH/one-$VM_ID/one-$VM_ID.vmx
> ---
>
> More precisely, the "mv" is failing to find any ".vmx" file in
> "/export/vg0-lv0/one-25/*.vmx", which is a copy of "WinXP_32bit_Dev"
> (BTW, I don't know why this "WinXP_32bit_Dev" doesn't have a full
> path, what does this VM template disk source attribute contain?).
> Could you check there is a .vmx file in that "WinXP_32bit_Dev" folder?
>
> Regards,
>
> -Tino
>
> --
> Constantino Vázquez Blanco | dsa-research.org/tinova
> Virtualization Technology Engineer / Researcher
> OpenNebula Toolkit | opennebula.org
>
>
>
> On Tue, Sep 14, 2010 at 10:51 PM, Jonathan Kelley <jkelley at vm-labs.com>
> wrote:
> >
> > I have been fiddling with various options and templates and have gotten
> > another interesting error case (see log output below). It seems as though
> > directories are failing to be created or something. Is it possible that I
> > have a permissions issue or something? Everything is running as root and
> the
> > permissions are root on the local NFS directory but my NFS mount is wide
> > open.
> > I would be curious to hear from other OpenNebula users how they have
> their
> > ESX environment configured as this seems as though it should be more
> > straightforward.
> > -Jon
> > root at vmlvsa251:/export/vg0-lv0# cat /srv/cloud/one/var/25/vm.log
> > Tue Sep 14 16:39:38 2010 [DiM][I]: New VM state is ACTIVE.
> > Tue Sep 14 16:39:39 2010 [LCM][I]: New VM state is PROLOG.
> > Tue Sep 14 16:39:39 2010 [VM][I]: Virtual Machine has no context
> > Tue Sep 14 16:39:39 2010 [TM][I]: Command execution fail:
> > /srv/cloud/one/lib/tm_commands/vmware/tm_clone.sh
> vmlvsa251:WinXP_32bit_Dev
> > 12core.boston.vm-labs.com:/export/vg0-lv0/25/images/disk.0
> > Tue Sep 14 16:39:39 2010 [TM][I]: STDERR follows.
> > Tue Sep 14 16:39:39 2010 [TM][I]: mv: cannot stat
> > `/export/vg0-lv0/one-25/*.vmx': No such file or directory
> > Tue Sep 14 16:39:39 2010 [TM][I]: ExitCode: 1
> > Tue Sep 14 16:39:39 2010 [TM][I]: tm_clone.sh: vmlvsa251:WinXP_32bit_Dev
> > 12core.boston.vm-labs.com:/export/vg0-lv0/25/images/disk.0
> > Tue Sep 14 16:39:39 2010 [TM][I]: tm_clone.sh: Cloning
> > vmlvsa251:WinXP_32bit_Dev
> > Tue Sep 14 16:39:39 2010 [TM][E]: Error excuting image transfer script:
> > Error message not available
> > Tue Sep 14 16:39:39 2010 [DiM][I]: New VM state is FAILED
> > Tue Sep 14 16:39:39 2010 [TM][W]: Ignored: LOG - 25 tm_delete.sh:
> Deleting
> > Tue Sep 14 16:39:39 2010 [TM][W]: Ignored: LOG - 25 tm_delete.sh:
> Executed
> > "rm -rf
> > /export/vg0-lv0/one-12core.boston.vm-labs.com:
> /export/vg0-lv0/25/images".
> > Tue Sep 14 16:39:39 2010 [TM][W]: Ignored: TRANSFER SUCCESS 25 -
> > -Jon
> >
> > On Tue, Sep 14, 2010 at 1:03 PM, Jonathan Kelley <jkelley at vm-labs.com>
> > wrote:
> >>
> >> Hi Tino,
> >> I found this in my ESX log given the instructions you specified below:
> >> [2010-09-14 16:56:55.564 22281B90 info 'TaskManager'] Task Created :
> >> haTask-ha-folder-vm-vim.Folder.registerVm-67171
> >> [2010-09-14 16:56:55.564 22CEFB90 info 'ha-folder-vm'] Register called:
> >> [datastore1]one-16/one-16.vmx
> >> [2010-09-14 16:56:55.570 22CEFB90 info 'VMFileChecker'] Config rules
> file
> >> '/etc/vmware/configrules' loaded and parsed successfully.
> >> [2010-09-14 16:56:55.571 22CEFB90 warning 'Vmsvc'] RegisterVm file check
> >> error: IO error
> >> [2010-09-14 16:56:55.574 22CEFB90 info 'App'] AdapterServer caught
> >> exception: 08c82f88
> >> [2010-09-14 16:56:55.574 22CEFB90 info 'TaskManager'] Task Completed :
> >> haTask-ha-folder-vm-vim.Folder.registerVm-67171 Status error
> >>
> >> This is from the vmm_vmware.log:
> >> [14.09.2010 12:57:34] Failed deploying VM 16 into
> >> 12core.boston.vm-labs.com.Reason:null
> >> This is from the $ONE_LOCATION/var/16/vm.log:
> >> Tue Sep 14 12:57:31 2010 [DiM][I]: New VM state is ACTIVE.
> >> Tue Sep 14 12:57:31 2010 [LCM][I]: New VM state is PROLOG.
> >> Tue Sep 14 12:57:31 2010 [VM][I]: Virtual Machine has no context
> >> Tue Sep 14 12:57:31 2010 [LCM][I]: New VM state is BOOT
> >> Tue Sep 14 12:57:31 2010 [VMM][I]: Generating deployment file:
> >> /srv/cloud/one/var/16/deployment.0
> >> Tue Sep 14 12:57:34 2010 [VMM][E]: Error deploying virtual machine:
> Failed
> >> deploying VM in host 12core.boston.vm-labs.com.
> >> Tue Sep 14 12:57:35 2010 [DiM][I]: New VM state is FAILED
> >> Tue Sep 14 12:57:35 2010 [TM][W]: Ignored: LOG - 16 tm_delete.sh:
> Deleting
> >> Tue Sep 14 12:57:35 2010 [TM][W]: Ignored: LOG - 16 tm_delete.sh:
> Executed
> >> "rm -rf
> >> /export/vg0-lv0/one-12core.boston.vm-labs.com:
> /srv/cloud/one/var//16/images".
> >> Tue Sep 14 12:57:35 2010 [TM][W]: Ignored: TRANSFER SUCCESS 16 -
> >>
> >> Does this help debug the situation?
> >> Thanks,
> >> Jon
> >>
> >> On Mon, Sep 13, 2010 at 6:58 AM, Tino Vazquez <tinova at fdi.ucm.es>
> wrote:
> >>>
> >>> Hi Jonathan,
> >>>
> >>> To define an OpenNebula VMware template you need to set as the source
> >>> for the DISK the folder where all the VMware related VM files are
> >>> placed.
> >>>
> >>> About the error you are experiencing, the configuration should be
> >>> (assuming you are using the tm_vmware driver, i discourage the use of
> >>> the tm_vmware_ssh prototype transfer driver):
> >>>
> >>> * No VM_DIR set in oned.conf
> >>> * DATASTORE_PATH in the TM configuration should point to a local path
> >>> in the OpenNebula front-end that is used as the NFS export which the
> >>> ESXs mount as their DATASTORE.
> >>>
> >>> If this is correctly set, we will need to take a look at the log of
> >>> the vmm driver to see exactly what is failing.
> >>>
> >>> Best regards,
> >>>
> >>> -Tino
> >>>
> >>> --
> >>> Constantino Vázquez Blanco | dsa-research.org/tinova
> >>> Virtualization Technology Engineer / Researcher
> >>> OpenNebula Toolkit | opennebula.org
> >>>
> >>>
> >>>
> >>> On Thu, Sep 9, 2010 at 7:04 PM, Jonathan Kelley <jkelley at vm-labs.com>
> >>> wrote:
> >>> > Hi Tino,
> >>> > It was set but unsetting it didn't change the issue except now that
> >>> > path
> >>> > after the host has changed to be invalid it seems.
> >>> > Thu Sep 9 13:01:32 2010 [DiM][D]: Deploying VM 15
> >>> > Thu Sep 9 13:01:32 2010 [TM][D]: Message received: TRANSFER SUCCESS
> 15
> >>> > -
> >>> > Thu Sep 9 13:01:40 2010 [VMM][D]: Message received: DEPLOY FAILURE
> 15
> >>> > Failed deploying VM in host esxhost
> >>> > Thu Sep 9 13:01:41 2010 [ReM][D]: VirtualMachinePoolInfo method
> >>> > invoked
> >>> > Thu Sep 9 13:01:41 2010 [TM][D]: Message received: LOG - 15
> >>> > tm_delete.sh:
> >>> > Deleting
> >>> > Thu Sep 9 13:01:41 2010 [TM][D]: Message received: LOG - 15
> >>> > tm_delete.sh:
> >>> > Executed "rm -rf
> >>> > /export/vg0-lv0/esxhost:/srv/cloud/one/var//15/images".
> >>> > Thu Sep 9 13:01:41 2010 [TM][D]: Message received: TRANSFER SUCCESS
> 15
> >>> > -
> >>> > Thanks,
> >>> > Jon
> >>> >
> >>> > On Thu, Sep 9, 2010 at 12:59 PM, Tino Vazquez <tinova at fdi.ucm.es>
> >>> > wrote:
> >>> >>
> >>> >> Hi Jonathan,
> >>> >>
> >>> >> One further question, did you set the VM_DIR in oned.conf? If so,
> try
> >>> >> to unset it.
> >>> >>
> >>> >> Regards,
> >>> >>
> >>> >> -Tino
> >>> >>
> >>> >> --
> >>> >> Constantino Vázquez Blanco | dsa-research.org/tinova
> >>> >> Virtualization Technology Engineer / Researcher
> >>> >> OpenNebula Toolkit | opennebula.org
> >>> >>
> >>> >>
> >>> >>
> >>> >> On Tue, Sep 7, 2010 at 4:30 PM, Jonathan Kelley <
> jkelley at vm-labs.com>
> >>> >> wrote:
> >>> >> > Hi Tino,
> >>> >> > Yes my file looks like the following:
> >>> >> > root at vmlvsa251:/srv/cloud/one# cat etc/tm_vmware/tm_vmwarerc
> >>> >> > #
> >>> >> >
> >>> >> >
> --------------------------------------------------------------------------
> >>> >> > #
> >>> >> > # Copyright 2002-2010, OpenNebula Project Leads (OpenNebula.org)
> >>> >> > #
> >>> >> > #
> >>> >> > #
> >>> >> > # Licensed under the Apache License, Version 2.0 (the "License");
> >>> >> > you
> >>> >> > may
> >>> >> > #
> >>> >> > # not use this file except in compliance with the License. You may
> >>> >> > obtain
> >>> >> > #
> >>> >> > # a copy of the License at
> >>> >> > #
> >>> >> > #
> >>> >> > #
> >>> >> > # http://www.apache.org/licenses/LICENSE-2.0
> >>> >> > #
> >>> >> > #
> >>> >> > #
> >>> >> > # Unless required by applicable law or agreed to in writing,
> >>> >> > software
> >>> >> > #
> >>> >> > # distributed under the License is distributed on an "AS IS"
> BASIS,
> >>> >> > #
> >>> >> > # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
> >>> >> > implied.
> >>> >> > #
> >>> >> > # See the License for the specific language governing permissions
> >>> >> > and
> >>> >> > #
> >>> >> > # limitations under the License.
> >>> >> > #
> >>> >> >
> >>> >> >
> >>> >> >
> #---------------------------------------------------------------------------
> >>> >> > #
> >>> >> > # Uncomment the following line to active MAD debug
> >>> >> > ONE_MAD_DEBUG=1
> >>> >> > # Local path of the datastore
> >>> >> > DATASTORE_PATH=/export/vg0-lv0
> >>> >> >
> >>> >> > Let me know if there is something else needed.
> >>> >> > Thanks,
> >>> >> > Jon
> >>> >> >
> >>> >> > On Fri, Sep 3, 2010 at 1:07 PM, Tino Vazquez <tinova at fdi.ucm.es>
> >>> >> > wrote:
> >>> >> >>
> >>> >> >> Hi Jonathan,
> >>> >> >>
> >>> >> >> Have you set the OpenNebula local path that is mounted as
> >>> >> >> datastore1
> >>> >> >> in the ESX in
> >>> >> >>
> >>> >> >> * $ONE_LOCATION/etc/tm_vmware/tm_vmwarerc --> variable
> >>> >> >> DATASTORE_PATH
> >>> >> >>
> >>> >> >> ?
> >>> >> >>
> >>> >> >> Regards,
> >>> >> >>
> >>> >> >> -Tino
> >>> >> >> --
> >>> >> >> Constantino Vázquez Blanco | dsa-research.org/tinova
> >>> >> >> Virtualization Technology Engineer / Researcher
> >>> >> >> OpenNebula Toolkit | opennebula.org
> >>> >> >>
> >>> >> >>
> >>> >> >>
> >>> >> >> On Thu, Sep 2, 2010 at 6:05 PM, Jonathan Kelley
> >>> >> >> <jkelley at vm-labs.com>
> >>> >> >> wrote:
> >>> >> >> >
> >>> >> >> > Hi Tino,
> >>> >> >> > I think I am getting a little farther in that I was trying to
> use
> >>> >> >> > the
> >>> >> >> > onevm
> >>> >> >> > create <image> instead of registering (which worked but not
> sure
> >>> >> >> > it
> >>> >> >> > helps).
> >>> >> >> > However it fails to create the vm and I find this message in
> the
> >>> >> >> > vmm_vmware.log:
> >>> >> >> > [02.09.2010 11:57:44] Failed deploying VM 1 into
> >>> >> >> > 12core.xxxxx.com.Reason:/export/vg0-lv0/1/deployment.0 (No such
> >>> >> >> > file
> >>> >> >> > or
> >>> >> >> > directory)
> >>> >> >> > with these messages in the oned.log:
> >>> >> >> > Thu Sep 2 11:57:43 2010 [DiM][D]: Deploying VM 1
> >>> >> >> > Thu Sep 2 11:57:43 2010 [ReM][D]: VirtualMachinePoolInfo
> method
> >>> >> >> > invoked
> >>> >> >> > Thu Sep 2 11:57:43 2010 [TM][D]: Message received: TRANSFER
> >>> >> >> > SUCCESS
> >>> >> >> > 1 -
> >>> >> >> > Thu Sep 2 11:57:44 2010 [VMM][D]: Message received: DEPLOY
> >>> >> >> > FAILURE 1
> >>> >> >> > Failed
> >>> >> >> > deploying VM in host 12core.boston.vm-labs.com.
> >>> >> >> > Thu Sep 2 11:57:44 2010 [TM][D]: Message received: LOG - 1
> >>> >> >> > tm_delete.sh:
> >>> >> >> > Deleting
> >>> >> >> > Thu Sep 2 11:57:44 2010 [TM][D]: Message received: LOG - 1
> >>> >> >> > tm_delete.sh:
> >>> >> >> > Executed "rm -rf
> >>> >> >> > /export/vg0-lv0/one-12core.xxxxx.com:
> /export/vg0-lv0/1/images".
> >>> >> >> > Thu Sep 2 11:57:44 2010 [TM][D]: Message received: TRANSFER
> >>> >> >> > SUCCESS
> >>> >> >> > 1 -
> >>> >> >> > Any tips with these messages?
> >>> >> >> > I have a single NFS mount on the ESX host as datastore1 and is
> a
> >>> >> >> > local
> >>> >> >> > path
> >>> >> >> > to the OpenNebula front-end.
> >>> >> >> > -Jon
> >>> >> >> >
> >>> >> >> >
> >>> >> >> > On Thu, Sep 2, 2010 at 11:39 AM, Jonathan Kelley
> >>> >> >> > <jkelley at vm-labs.com>
> >>> >> >> > wrote:
> >>> >> >> >>
> >>> >> >> >> Hi Tino,
> >>> >> >> >> Thanks for the quick reply.
> >>> >> >> >> How do you specify a VM PATH though as my VM has 5-6
> associated
> >>> >> >> >> files?
> >>> >> >> >> Here is the example given:
> >>> >> >> >>
> >>> >> >> >> NAME = "Ubuntu Web Development"
> >>> >> >> >> PATH = /home/one_user/images/ubuntu_desktop.img
> >>> >> >> >> PUBLIC = YES
> >>> >> >> >> DESCRIPTION = "Ubuntu 10.04 desktop for Web Development
> >>> >> >> >> students.
> >>> >> >> >> Contains the pdf lessons and exercises as well as all the
> >>> >> >> >> necessary
> >>> >> >> >> programming tools and testing frameworks."
> >>> >> >> >>
> >>> >> >> >> For my Windows XP I have two disk files so how do I specify
> two
> >>> >> >> >> files
> >>> >> >> >> in
> >>> >> >> >> the PATH field? Or do I specify the vmx file?
> >>> >> >> >> Thanks again,
> >>> >> >> >> -Jon
> >>> >> >> >>
> >>> >> >> >> On Thu, Sep 2, 2010 at 11:29 AM, Tino Vazquez
> >>> >> >> >> <tinova at fdi.ucm.es>
> >>> >> >> >> wrote:
> >>> >> >> >>>
> >>> >> >> >>> Hi Jonathan,
> >>> >> >> >>>
> >>> >> >> >>> The way to use the image catalog is to upload individual
> >>> >> >> >>> images,
> >>> >> >> >>> each
> >>> >> >> >>> of them requiring an image template [1].
> >>> >> >> >>>
> >>> >> >> >>> One registered, a VM can use an image by just referencing the
> >>> >> >> >>> image's
> >>> >> >> >>> name (same as the VirtualNetwork from your template, using
> just
> >>> >> >> >>> the
> >>> >> >> >>> name "VMWareNET").
> >>> >> >> >>>
> >>> >> >> >>> Regards,
> >>> >> >> >>>
> >>> >> >> >>> -Tino
> >>> >> >> >>>
> >>> >> >> >>> [1] http://opennebula.org/documentation:rel2.0:img_template
> >>> >> >> >>> --
> >>> >> >> >>> Constantino Vázquez Blanco | dsa-research.org/tinova
> >>> >> >> >>> Virtualization Technology Engineer / Researcher
> >>> >> >> >>> OpenNebula Toolkit | opennebula.org
> >>> >> >> >>>
> >>> >> >> >>>
> >>> >> >> >>>
> >>> >> >> >>> On Thu, Sep 2, 2010 at 4:57 PM, Jonathan Kelley
> >>> >> >> >>> <jkelley at vm-labs.com>
> >>> >> >> >>> wrote:
> >>> >> >> >>> > Hello,
> >>> >> >> >>> > I am trying to register my VM to use with OpenNebula and
> ESX
> >>> >> >> >>> > 4.1.
> >>> >> >> >>> > I copied the VM folder to the shared nfs storage and then
> >>> >> >> >>> > have
> >>> >> >> >>> > tried
> >>> >> >> >>> > to
> >>> >> >> >>> > create a template for this vm but I am not sure I have it
> >>> >> >> >>> > right:
> >>> >> >> >>> > root at xxxx:/srv/cloud/one# cat
> /export/vg0-lv0/WinXP.template
> >>> >> >> >>> > NAME=VMwareVM
> >>> >> >> >>> > MEMORY=256
> >>> >> >> >>> > CPU=1
> >>> >> >> >>> > NIC=[NETWORK="VMWareNet"]
> >>> >> >> >>> > DISK=[ source="/export/vg0-lv0/WinXP_32bit_Dev",
> >>> >> >> >>> > clone="yes",
> >>> >> >> >>> > save="no"]
> >>> >> >> >>> > However when I run the register command I get image not
> >>> >> >> >>> > present
> >>> >> >> >>> > messages:
> >>> >> >> >>> > root at xxxx:/export/vg0-lv0# /srv/cloud/one/bin/oneimage
> >>> >> >> >>> > register
> >>> >> >> >>> > ./WinXP.template
> >>> >> >> >>> > Error: Image not present, aborting.
> >>> >> >> >>> >
> >>> >> >> >>> > It is not quite clear to me what the template should look
> >>> >> >> >>> > like
> >>> >> >> >>> > and
> >>> >> >> >>> > how
> >>> >> >> >>> > to
> >>> >> >> >>> > register an existing VMware VM.
> >>> >> >> >>> > Thanks,
> >>> >> >> >>> > Jon
> >>> >> >> >>> >
> >>> >> >> >>> > _______________________________________________
> >>> >> >> >>> > Users mailing list
> >>> >> >> >>> > Users at lists.opennebula.org
> >>> >> >> >>> >
> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
> >>> >> >> >>> >
> >>> >> >> >>> >
> >>> >> >> >>
> >>> >> >> >
> >>> >> >> >
> >>> >> >> >
> >>> >> >> > _______________________________________________
> >>> >> >> > Users mailing list
> >>> >> >> > Users at lists.opennebula.org
> >>> >> >> > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
> >>> >> >> >
> >>> >> >> >
> >>> >> >
> >>> >> >
> >>> >
> >>> >
> >>
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20100916/e52e7ae4/attachment-0001.htm>
More information about the Users
mailing list