[one-users] Problem with ebtables-kvm script.

Mon Nov 30 03:04:05 PST 2009

Hi Gianni,
I have updated the documentation for the new set of ebtables scripts:

http://opennebula.org/doku.php?id=documentation:rel1.4:nm

Regarding your problems, please verify the following things:

* you have properly set the VM_HOOK configuration in oned.conf, especially
the remote = "yes" option, and restarted one.
* brctl is installed in your worker nodes
* oneadmin user has permissions to execute "sudo ebtables" and "sudo virsh"
in the worker nodes.

regards,
Jaime

On Thu, Nov 26, 2009 at 4:58 PM, Gianni Dalla Torre <
gianni.dallatorre at cnaf.infn.it> wrote:

>  Hi Jaime,
>
> thank you for the support, I changed the oned.conf, but I still have
> problems (using argv[1] in the script, was the same to omit start indeed).
> Checking the vm.log seems monitor information has some problems:
>
> Thu Nov 26 14:29:01 2009 [LCM][I]: New VM state is BOOT
> Thu Nov 26 14:29:01 2009 [VMM][I]: Generating deployment file:
> /srv/cloud/one/var/38/deployment.0
> Thu Nov 26 14:29:03 2009 [LCM][I]: New VM state is RUNNING
> Thu Nov 26 14:29:20 2009 [VMM][D]: Monitor Information:
>         CPU   : -1
>         Memory: 524288
>         Net_TX: -1
>         Net_RX: -1
> Thu Nov 26 14:29:33 2009 [HKM][I]: Command execution fail:
> '/srv/cloud/one/share/hooks/ebtables-kvm one-38'
> Thu Nov 26 14:29:33 2009 [HKM][I]: STDERR follows.
> Thu Nov 26 14:29:33 2009 [HKM][I]: 14:29:03.836: error : No vport operation
> path found for host1
> Thu Nov 26 14:29:33 2009 [HKM][I]: 14:29:03.851: error : No vport operation
> path found for host0
> Thu Nov 26 14:29:33 2009 [HKM][I]: 14:29:03.872: error : No vport operation
> path found for host2
> Thu Nov 26 14:29:33 2009 [HKM][I]: 14:29:03.929: warning : Cannot set group
> when not running as root
> Thu Nov 26 14:29:33 2009 [HKM][I]: 14:29:04.119: error : Domain not found:
> no domain with matching name 'one-38'
> Thu Nov 26 14:29:33 2009 [HKM][I]: libvir: QEMU error : Domain not found:
> no domain with matching name 'one-38'
> Thu Nov 26 14:29:33 2009 [HKM][I]: error: failed to get domain 'one-38'
> Thu Nov 26 14:29:33 2009 [HKM][I]: error: Domain not found: no domain with
> matching name 'one-38'
> Thu Nov 26 14:29:33 2009 [HKM][I]: /usr/lib/ruby/1.8/rexml/encoding.rb:47:
> command not found: brctl show
> Thu Nov 26 14:29:33 2009 [HKM][I]:
> /srv/cloud/one/share/hooks/ebtables-kvm:36:in `get_bridges': undefined
> method `each' for nil:NilClass (NoMethodError)
> Thu Nov 26 14:29:33 2009 [HKM][I]: from
> /srv/cloud/one/share/hooks/ebtables-kvm:50:in `get_interfaces'
> Thu Nov 26 14:29:33 2009 [HKM][I]: from
> /srv/cloud/one/share/hooks/ebtables-kvm:62
> Thu Nov 26 14:29:33 2009 [HKM][I]: ExitCode: 1
> Thu Nov 26 14:29:33 2009 [HKM][E]: Error executing Hook: ebtables-running.
>
> Any other suggestions?
>
> regards,
> Gianni
>
>
> Jaime Melis wrote:
>
> Hello Gianni,
> I'm afraid the documentation section related to the isolation of networks
> has not yet been properly updated  (
> http://opennebula.org/doku.php?id=documentation:rel1.4:nm).
>
> Please allow me one or two days to update the relevant section.
>
> In the meantime try with the following confiuration:
>
> The "oned.conf" should be:
>
> arguments = "one-$VMID",
> instead of
> arguments = "start one-$VMID",
>
> so please go ahead and change that in your oned.conf.
>
> As soon as I finish updating the configuration I will let you know.
>
>
> Thanks for your feedback.
>
> regards,
> Jaime
>
>
>
>  On Wed, Nov 25, 2009 at 3:02 PM, Gianni Dalla Torre <
> gianni.dallatorre at cnaf.infn.it> wrote:
>
>> Hi all,
>>
>> I update my installation to the last 1.3.90 openNenbula version, and I'm
>> trying to give some public Ip to my VM. using Bridged networking and the
>> scripts included in the last release.
>>
>> But I have a problem with this script:
>> /srv/cloud/one/share/hooks/ebtables-kvm
>>
>> This is the log I have:
>> Wed Nov 25 12:41:45 2009 [VMM][D]: Message received: DEPLOY SUCCESS 36
>> one-36
>> Wed Nov 25 12:41:46 2009 [HKM][D]: Message received: LOG - 36 Command
>> execution fail: '/srv/cloud/one/share/hooks/ebtables-kvm start one-36'
>> Wed Nov 25 12:41:46 2009 [HKM][D]: Message received: LOG - 36 STDERR
>> follows.
>> Wed Nov 25 12:41:46 2009 [HKM][D]: Message received: LOG - 36 error:
>> failed to get domain 'start'
>> Wed Nov 25 12:41:46 2009 [HKM][D]: Message received: LOG - 36 error:
>> Domain not found: no domain with matching name 'start'
>> Wed Nov 25 12:41:46 2009 [HKM][D]: Message received: LOG - 36
>> /usr/lib/ruby/1.8/rexml/encoding.rb:47: command not found: brctl show
>> Wed Nov 25 12:41:46 2009 [HKM][D]: Message received: LOG - 36
>> /srv/cloud/one/share/hooks/ebtables-kvm:36:in `get_bridges': undefined
>> method `each' for nil:NilClass (NoMethodError)
>> Wed Nov 25 12:41:46 2009 [HKM][D]: Message received: LOG - 36 from
>> /srv/cloud/one/share/hooks/ebtables-kvm:50:in `get_interfaces'
>> Wed Nov 25 12:41:46 2009 [HKM][D]: Message received: LOG - 36 from
>> /srv/cloud/one/share/hooks/ebtables-kvm:62
>> Wed Nov 25 12:41:46 2009 [HKM][D]: Message received: LOG - 36 ExitCode: 1
>> Wed Nov 25 12:41:46 2009 [HKM][D]: Message received: EXECUTE FAILURE 36
>> ebtables-running
>> Wed Nov 25 12:42:10 2009 [VMM][I]: Monitoring VM 36.
>> Wed Nov 25 12:42:11 2009 [VMM][D]: Message received: POLL SUCCESS 36
>>  STATE=a USEDMEMORY=524288
>> Wed Nov 25 12:42:19 2009 [InM][D]: Host 4 successfully monitored.
>>
>> I also had a go changing the assignation of argv[0] to argv [1] inside the
>> script, but it didn't work.
>>
>> This are some information about my host configuration:
>>
>> I configured an OpenNebula (v 1.3.90) front-end in my pc "solaris" (Ubuntu
>> 9.04) and installed a cluster node "omii001" (Scientific Linux CERN SLC
>> release 2.6.18-164.6.1.el5 x86_64).
>> I need to access my VM through ssh, so I used the Bridged
>> networking("shared physical device") following this instructions:
>> http://www.opennebula.org/doku.php?id=documentation:rel1.4:nm
>>
>> oneadmin at omii001$ brctl show
>> bridge name     bridge id               STP enabled     interfaces
>> br0             8000.0015c5edbf17       no              vnet0
>>                                                        eth0
>> virbr0          8000.000000000000       yes
>>
>> Setting ifcfg-eth0 and ifcfg-br0 in this way:
>>
>> oneadmin at omii001$ cat /etc/sysconfig/network-scripts/ifcfg-eth0
>> # Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet
>> DEVICE=eth0
>> BOOTPROTO=static
>> DHCPCLASS=
>> HWADDR=00:15:C5:ED:BF:17
>> IPADDR=131.154.100.175
>> NETMASK=255.255.255.0
>> ONBOOT=yes
>> BRIDGE=br0
>>
>> oneadmin at omii001$ cat /etc/sysconfig/network-scripts/ifcfg-br0
>> DEVICE=br0
>> TYPE=Bridge
>> BOOTPROTO=dhcp
>> ONBOOT=yes
>> DELAY=0
>>
>> And this is the template of the VM:
>>
>> #---------------------------------------
>> # VM definition example
>> #---------------------------------------
>> NAME    = two
>> CPU     = 1 MEMORY  = 512
>> # --- kernel & boot device ---
>> OS      = [ boot   = hd]
>> # --- 1 disks ---
>> DISK    = [
>>        source   = "/srv/cloud/one/images/debian5.img",
>>        target   = "vda",
>>        readonly = "no" ]
>> # --- I/O ---
>> GRAPHICS= [
>>       type    = "vnc",
>>       listen  = "127.0.0.1",
>>       port    = "1"]
>> # --- 2 NIC ---
>> #NIC    = [ NETWORK = "OpenNebulaLAN",
>> #       BRIDGE  = "wlan0" ]
>> NIC     = [ NETWORK = "PublicVLAN",
>>       BRIDGE  = "br0" ]
>> SAVE    = yes
>>
>> Some other information about my configuration are in the previous mail:
>>
>> http://lists.opennebula.org/pipermail/users-opennebula.org/2009-November/001202.html
>>
>> If someone have some advice, I would really appreciate it.
>>
>> Best regards,
>> Gianni.
>>
>>
>> |-----|
>> |NOTE:|
>> |-----|
>> I'm not sure if it could be related, but when I compiled opennebula I had
>> problems with some dependencies, but anyway the installation seems to work.
>> ( I'm sure I installed all the the software dependencies listed in the
>> "Platform Notes 1.4" page). I also read some other people had the same issue
>> in the past, but I
>> cannot find the solution and neither any package for Ubuntu that satisfies
>> the requirements.
>>
>> oneadmin at solaris:~/one-1.3.90$ <oneadmin at solaris:%7E/one-1.3.90$> sudo
>> scons
>> scons: Reading SConscript files ...
>> Testing recipe: pkg-config
>>  Error calling pkg-config xmlrpc_server_abyss++ --static --libs
>> Testing recipe: xmlrpc-c-config
>> g++ .xmlrpc_test/xmlrpc_test.a7469a.cc -o
>> .xmlrpc_test/xmlrpc_test.a7469a.cc.out -L/usr/lib  -lxmlrpc_server_abyss++
>> -lxmlrpc_server++ -lxmlrpc_server_abyss -lxmlrpc_server -lxmlrpc_abyss
>>  -lpthread -lxmlrpc++ -lxmlrpc -lxmlrpc_util -lxmlrpc_xmlparse
>> -lxmlrpc_xmltok  -I/usr/include 1>>.xmlrpc_test/xmlrpc_test.a7469a.cc.log
>> 2>&1
>>
>> Testing recipe: pkg-config
>>  Error calling pkg-config xmlrpc_client++ xmlrpc++ --libs
>> Testing recipe: xmlrpc-c-config
>> g++ .xmlrpc_test/xmlrpc_test.2781fc.cc -o
>> .xmlrpc_test/xmlrpc_test.2781fc.cc.out -L/usr/lib  -lxmlrpc_client++ -lcurl
>> -lgssapi_krb5 -lxmlrpc_client -lxmlrpc++ -lxmlrpc -lxmlrpc_util
>> -lxmlrpc_xmlparse -lxmlrpc_xmltok -Wl,--rpath -Wl,/usr/lib  -I/usr/include
>> 1>>.xmlrpc_test/xmlrpc_test.2781fc.cc.log 2>&1
>>
>> Testing recipe: pkg-config
>>  Error calling pkg-config xmlrpc_server_abyss++ --static --libs
>> Testing recipe: xmlrpc-c-config
>> g++ .xmlrpc_test/xmlrpc_test.6d95be.cc -o
>> .xmlrpc_test/xmlrpc_test.6d95be.cc.out -L/usr/lib  -lxmlrpc_server_abyss++
>> -lxmlrpc_server++ -lxmlrpc_server_abyss -lxmlrpc_server -lxmlrpc_abyss
>>  -lpthread -lxmlrpc++ -lxmlrpc -lxmlrpc_util -lxmlrpc_xmlparse
>> -lxmlrpc_xmltok  -I/usr/include 1>>.xmlrpc_test/xmlrpc_test.6d95be.cc.log
>> 2>&1
>>
>> Testing recipe: pkg-config
>>  Error calling pkg-config xmlrpc_client++ xmlrpc++ --libs
>> Testing recipe: xmlrpc-c-config
>> g++ .xmlrpc_test/xmlrpc_test.ce42a1.cc -o
>> .xmlrpc_test/xmlrpc_test.ce42a1.cc.out -L/usr/lib  -lxmlrpc_client++ -lcurl
>> -lgssapi_krb5 -lxmlrpc_client -lxmlrpc++ -lxmlrpc -lxmlrpc_util
>> -lxmlrpc_xmlparse -lxmlrpc_xmltok -Wl,--rpath -Wl,/usr/lib  -I/usr/include
>> 1>>.xmlrpc_test/xmlrpc_test.ce42a1.cc.log 2>&1
>>
>> scons: done reading SConscript files.
>> scons: Building targets ...
>> scons: `.' is up to date.
>> scons: done building targets.
>>
>> --
>> Gianni Dalla Torre
>>
>
>
> --
> Gianni Dalla Torre
> Computer Science Engineering
>
> INFN -CNAF
> Via Ranzani 13/2
> 40127 Bologna, Italy
> Phone: +39 051 6092913
> Fax: +39 051 6092916
> mail: dallatorre&cnaf.infn.it
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20091130/3ae248fd/attachment-0002.htm>