[one-users] Problem with ebtables-kvm script.
Gianni Dalla Torre
gianni.dallatorre at cnaf.infn.it
Mon Dec 14 06:09:21 PST 2009
Hi Jamie,
I have no problem connecting to qemu:///system using virsh as oneadmin:
oneadmin at omii001:virsh -c qemu:///system
Welcome to virsh, the virtualization interactive terminal.
Type: 'help' for help with commands
'quit' to quit
but I think it is strange that, if I run:
oneadmin at omii001:virsh
14:56:19.573: error : No vport operation path found for host1
14:56:19.588: error : No vport operation path found for host0
14:56:19.609: error : No vport operation path found for host2
14:56:19.666: warning : Cannot set group when not running as root
Welcome to virsh, the virtualization interactive terminal.
Type: 'help' for help with commands
'quit' to quit
I don't see this line
Connecting to uri: qemu:///system
which, instead, I can see if I run the command on other node ivanov:
oneadmin at ivanov:virsh
Connecting to uri: qemu:///system
Welcome to virsh, the virtualization interactive terminal.
Type: 'help' for help with commands
'quit' to quit
this is the other output, that you request me:
oneadmin at omii001$ ls -l /var/run/libvirt/
total 8
srwxrwx--- 1 root libvirtd 0 Dec 14 10:05 libvirt-sock
srwxrwxrwx 1 root libvirtd 0 Dec 14 10:05 libvirt-sock-ro
drwxr-xr-x 2 root root 4096 Dec 14 10:05 network
drwxr-xr-x 2 root root 4096 Dec 14 09:56 qemu
Thank you very much,
Gianni.
On 14/12/2009 11:49, Jaime Melis wrote:
> HI Gianni,
> quick question, can you do
> virsh -c qemu:///system
> as oneadmin in omnii001? (explicitly without sudo).
>
> If you can't you should add oneadmin to the group libvirtd in omni001.
> If after that, it still doesn't work, send me the output of:
> ls -l /var/run/libvirt/
>
> regards,
> Jaime
>
> On Fri, Dec 11, 2009 at 4:41 PM, Gianni Dalla Torre
> <gianni.dallatorre at cnaf.infn.it
> <mailto:gianni.dallatorre at cnaf.infn.it>> wrote:
>
> Hi Jamie,
>
> I'm still stuck..
> The virtual machines deployed by kvm-opennebula driver have this
> rights:
> -rw------- 1 root root 11 Dec 2 15:38
> /var/run/libvirt/qemu/one-50.pid
> I suppose there is something wrong because with this settings I
> can't see the VM as oneadmin, in fact:
>
> oneamdin at omii001$ virsh list
> 16:24:54.622: error : No vport operation path found for host1
> 16:24:54.637: error : No vport operation path found for host0
> 16:24:54.658: error : No vport operation path found for host2
> 16:24:54.715: warning : Cannot set group when not running as root
> Id Name State
> ----------------------------------
>
> oneamdin at omii001$ sudo virsh list
> Id Name State
> ----------------------------------
> 4 one-50 running
>
> Where and by who the VM are deployed?
>
> This is my report:
>
> Fri Dec 11 15:38:34 2009 [VMM][D]: Message received: DEPLOY
> SUCCESS 50 one-50
> Fri Dec 11 15:39:01 2009 [VMM][I]: Monitoring VM 50.
> Fri Dec 11 15:39:02 2009 [VMM][D]: Message received: POLL SUCCESS
> 50 STATE=a USEDMEMORY=524288
> Fri Dec 11 15:39:05 2009 [HKM][D]: Message received: LOG - 50
> Command execution fail: '/srv/cloud/one/share/hooks/ebtables-kvm
> one-50'
> Fri Dec 11 15:39:05 2009 [HKM][D]: Message received: LOG - 50
> STDERR follows.
> Fri Dec 11 15:39:05 2009 [HKM][D]: Message received: LOG - 50
> 15:37:27.779: error : No vport operation path found for host1
> Fri Dec 11 15:39:05 2009 [HKM][D]: Message received: LOG - 50
> 15:37:27.795: error : No vport operation path found for host0
> Fri Dec 11 15:39:05 2009 [HKM][D]: Message received: LOG - 50
> 15:37:27.817: error : No vport operation path found for host2
> Fri Dec 11 15:39:05 2009 [HKM][D]: Message received: LOG - 50
> 15:37:27.877: warning : Cannot set group when not running as root
> Fri Dec 11 15:39:05 2009 [HKM][D]: Message received: LOG - 50
> 15:37:28.064: error : Domain not found: no domain with matching
> name 'one-50'
> Fri Dec 11 15:39:05 2009 [HKM][D]: Message received: LOG - 50
> libvir: QEMU error : Domain not found: no domain with matching
> name 'one-50'
> Fri Dec 11 15:39:05 2009 [HKM][D]: Message received: LOG - 50
> error: failed to get domain 'one-50'
> Fri Dec 11 15:39:05 2009 [HKM][D]: Message received: LOG - 50
> error: Domain not found: no domain with matching name 'one-50'
> Fri Dec 11 15:39:05 2009 [HKM][D]: Message received: LOG - 50
> /usr/lib/ruby/1.8/rexml/encoding.rb:47: command not found: brctl show
> Fri Dec 11 15:39:05 2009 [HKM][D]: Message received: LOG - 50
> /srv/cloud/one/share/hooks/ebtables-kvm:36:in `get_bridges':
> undefined method `each' for nil:Ni
> lClass (NoMethodError)
> Fri Dec 11 15:39:05 2009 [HKM][D]: Message received: LOG - 50 from
> /srv/cloud/one/share/hooks/ebtables-kvm:50:in `get_interfaces'
> Fri Dec 11 15:39:05 2009 [HKM][D]: Message received: LOG - 50 from
> /srv/cloud/one/share/hooks/ebtables-kvm:62
> Fri Dec 11 15:39:05 2009 [HKM][D]: Message received: LOG - 50
> ExitCode: 1
> Fri Dec 11 15:39:05 2009 [HKM][D]: Message received: EXECUTE
> FAILURE 50 ebtables-running
>
> Thanks in advance for the help.
>
> Regards,
> Gianni
>
>
>
> On 30/11/2009 12:04, Jaime Melis wrote:
>> Hi Gianni,
>> I have updated the documentation for the new set of ebtables scripts:
>>
>> http://opennebula.org/doku.php?id=documentation:rel1.4:nm
>>
>> Regarding your problems, please verify the following things:
>>
>> * you have properly set the VM_HOOK configuration in oned.conf,
>> especially the remote = "yes" option, and restarted one.
>> * brctl is installed in your worker nodes
>> * oneadmin user has permissions to execute "sudo ebtables" and
>> "sudo virsh" in the worker nodes.
>>
>> regards,
>> Jaime
>>
>> On Thu, Nov 26, 2009 at 4:58 PM, Gianni Dalla Torre
>> <gianni.dallatorre at cnaf.infn.it
>> <mailto:gianni.dallatorre at cnaf.infn.it>> wrote:
>>
>> Hi Jaime,
>>
>> thank you for the support, I changed the oned.conf, but I
>> still have problems (using argv[1] in the script, was the
>> same to omit start indeed).
>> Checking the vm.log seems monitor information has some problems:
>>
>> Thu Nov 26 14:29:01 2009 [LCM][I]: New VM state is BOOT
>> Thu Nov 26 14:29:01 2009 [VMM][I]: Generating deployment
>> file: /srv/cloud/one/var/38/deployment.0
>> Thu Nov 26 14:29:03 2009 [LCM][I]: New VM state is RUNNING
>> Thu Nov 26 14:29:20 2009 [VMM][D]: Monitor Information:
>> CPU : -1
>> Memory: 524288
>> Net_TX: -1
>> Net_RX: -1
>> Thu Nov 26 14:29:33 2009 [HKM][I]: Command execution fail:
>> '/srv/cloud/one/share/hooks/ebtables-kvm one-38'
>> Thu Nov 26 14:29:33 2009 [HKM][I]: STDERR follows.
>> Thu Nov 26 14:29:33 2009 [HKM][I]: 14:29:03.836: error : No
>> vport operation path found for host1
>> Thu Nov 26 14:29:33 2009 [HKM][I]: 14:29:03.851: error : No
>> vport operation path found for host0
>> Thu Nov 26 14:29:33 2009 [HKM][I]: 14:29:03.872: error : No
>> vport operation path found for host2
>> Thu Nov 26 14:29:33 2009 [HKM][I]: 14:29:03.929: warning :
>> Cannot set group when not running as root
>> Thu Nov 26 14:29:33 2009 [HKM][I]: 14:29:04.119: error :
>> Domain not found: no domain with matching name 'one-38'
>> Thu Nov 26 14:29:33 2009 [HKM][I]: libvir: QEMU error :
>> Domain not found: no domain with matching name 'one-38'
>> Thu Nov 26 14:29:33 2009 [HKM][I]: error: failed to get
>> domain 'one-38'
>> Thu Nov 26 14:29:33 2009 [HKM][I]: error: Domain not found:
>> no domain with matching name 'one-38'
>> Thu Nov 26 14:29:33 2009 [HKM][I]:
>> /usr/lib/ruby/1.8/rexml/encoding.rb:47: command not found:
>> brctl show
>> Thu Nov 26 14:29:33 2009 [HKM][I]:
>> /srv/cloud/one/share/hooks/ebtables-kvm:36:in `get_bridges':
>> undefined method `each' for nil:NilClass (NoMethodError)
>> Thu Nov 26 14:29:33 2009 [HKM][I]: from
>> /srv/cloud/one/share/hooks/ebtables-kvm:50:in `get_interfaces'
>> Thu Nov 26 14:29:33 2009 [HKM][I]: from
>> /srv/cloud/one/share/hooks/ebtables-kvm:62
>> Thu Nov 26 14:29:33 2009 [HKM][I]: ExitCode: 1
>> Thu Nov 26 14:29:33 2009 [HKM][E]: Error executing Hook:
>> ebtables-running.
>>
>> Any other suggestions?
>>
>> regards,
>> Gianni
>>
>>
>> Jaime Melis wrote:
>>> Hello Gianni,
>>> I'm afraid the documentation section related to the
>>> isolation of networks has not yet been properly updated
>>> (http://opennebula.org/doku.php?id=documentation:rel1.4:nm).
>>>
>>> Please allow me one or two days to update the relevant section.
>>>
>>> In the meantime try with the following confiuration:
>>>
>>> The "oned.conf" should be:
>>>
>>> arguments = "one-$VMID",
>>> instead of
>>> arguments = "start one-$VMID",
>>>
>>> so please go ahead and change that in your oned.conf.
>>>
>>> As soon as I finish updating the configuration I will let
>>> you know.
>>>
>>>
>>> Thanks for your feedback.
>>>
>>> regards,
>>> Jaime
>>>
>>>
>>>
>>> On Wed, Nov 25, 2009 at 3:02 PM, Gianni Dalla Torre
>>> <gianni.dallatorre at cnaf.infn.it
>>> <mailto:gianni.dallatorre at cnaf.infn.it>> wrote:
>>>
>>> Hi all,
>>>
>>> I update my installation to the last 1.3.90 openNenbula
>>> version, and I'm trying to give some public Ip to my VM.
>>> using Bridged networking and the scripts included in the
>>> last release.
>>>
>>> But I have a problem with this script:
>>> /srv/cloud/one/share/hooks/ebtables-kvm
>>>
>>> This is the log I have:
>>> Wed Nov 25 12:41:45 2009 [VMM][D]: Message received:
>>> DEPLOY SUCCESS 36 one-36
>>> Wed Nov 25 12:41:46 2009 [HKM][D]: Message received: LOG
>>> - 36 Command execution fail:
>>> '/srv/cloud/one/share/hooks/ebtables-kvm start one-36'
>>> Wed Nov 25 12:41:46 2009 [HKM][D]: Message received: LOG
>>> - 36 STDERR follows.
>>> Wed Nov 25 12:41:46 2009 [HKM][D]: Message received: LOG
>>> - 36 error: failed to get domain 'start'
>>> Wed Nov 25 12:41:46 2009 [HKM][D]: Message received: LOG
>>> - 36 error: Domain not found: no domain with matching
>>> name 'start'
>>> Wed Nov 25 12:41:46 2009 [HKM][D]: Message received: LOG
>>> - 36 /usr/lib/ruby/1.8/rexml/encoding.rb:47: command not
>>> found: brctl show
>>> Wed Nov 25 12:41:46 2009 [HKM][D]: Message received: LOG
>>> - 36 /srv/cloud/one/share/hooks/ebtables-kvm:36:in
>>> `get_bridges': undefined method `each' for nil:NilClass
>>> (NoMethodError)
>>> Wed Nov 25 12:41:46 2009 [HKM][D]: Message received: LOG
>>> - 36 from /srv/cloud/one/share/hooks/ebtables-kvm:50:in
>>> `get_interfaces'
>>> Wed Nov 25 12:41:46 2009 [HKM][D]: Message received: LOG
>>> - 36 from /srv/cloud/one/share/hooks/ebtables-kvm:62
>>> Wed Nov 25 12:41:46 2009 [HKM][D]: Message received: LOG
>>> - 36 ExitCode: 1
>>> Wed Nov 25 12:41:46 2009 [HKM][D]: Message received:
>>> EXECUTE FAILURE 36 ebtables-running
>>> Wed Nov 25 12:42:10 2009 [VMM][I]: Monitoring VM 36.
>>> Wed Nov 25 12:42:11 2009 [VMM][D]: Message received:
>>> POLL SUCCESS 36 STATE=a USEDMEMORY=524288
>>> Wed Nov 25 12:42:19 2009 [InM][D]: Host 4 successfully
>>> monitored.
>>>
>>> I also had a go changing the assignation of argv[0] to
>>> argv [1] inside the script, but it didn't work.
>>>
>>> This are some information about my host configuration:
>>>
>>> I configured an OpenNebula (v 1.3.90) front-end in my pc
>>> "solaris" (Ubuntu 9.04) and installed a cluster node
>>> "omii001" (Scientific Linux CERN SLC
>>> release 2.6.18-164.6.1.el5 x86_64).
>>> I need to access my VM through ssh, so I used the
>>> Bridged networking("shared physical device") following
>>> this instructions:
>>> http://www.opennebula.org/doku.php?id=documentation:rel1.4:nm
>>>
>>> oneadmin at omii001$ brctl show
>>> bridge name bridge id STP enabled
>>> interfaces
>>> br0 8000.0015c5edbf17 no
>>> vnet0
>>> eth0
>>> virbr0 8000.000000000000 yes
>>>
>>> Setting ifcfg-eth0 and ifcfg-br0 in this way:
>>>
>>> oneadmin at omii001$ cat
>>> /etc/sysconfig/network-scripts/ifcfg-eth0
>>> # Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet
>>> DEVICE=eth0
>>> BOOTPROTO=static
>>> DHCPCLASS=
>>> HWADDR=00:15:C5:ED:BF:17
>>> IPADDR=131.154.100.175
>>> NETMASK=255.255.255.0
>>> ONBOOT=yes
>>> BRIDGE=br0
>>>
>>> oneadmin at omii001$ cat
>>> /etc/sysconfig/network-scripts/ifcfg-br0
>>> DEVICE=br0
>>> TYPE=Bridge
>>> BOOTPROTO=dhcp
>>> ONBOOT=yes
>>> DELAY=0
>>>
>>> And this is the template of the VM:
>>>
>>> #---------------------------------------
>>> # VM definition example
>>> #---------------------------------------
>>> NAME = two
>>> CPU = 1 MEMORY = 512
>>> # --- kernel & boot device ---
>>> OS = [ boot = hd]
>>> # --- 1 disks ---
>>> DISK = [
>>> source = "/srv/cloud/one/images/debian5.img",
>>> target = "vda",
>>> readonly = "no" ]
>>> # --- I/O ---
>>> GRAPHICS= [
>>> type = "vnc",
>>> listen = "127.0.0.1",
>>> port = "1"]
>>> # --- 2 NIC ---
>>> #NIC = [ NETWORK = "OpenNebulaLAN",
>>> # BRIDGE = "wlan0" ]
>>> NIC = [ NETWORK = "PublicVLAN",
>>> BRIDGE = "br0" ]
>>> SAVE = yes
>>>
>>> Some other information about my configuration are in the
>>> previous mail:
>>> http://lists.opennebula.org/pipermail/users-opennebula.org/2009-November/001202.html
>>>
>>> If someone have some advice, I would really appreciate it.
>>>
>>> Best regards,
>>> Gianni.
>>>
>>>
>>> |-----|
>>> |NOTE:|
>>> |-----|
>>> I'm not sure if it could be related, but when I compiled
>>> opennebula I had problems with some dependencies, but
>>> anyway the installation seems to work.
>>> ( I'm sure I installed all the the software dependencies
>>> listed in the "Platform Notes 1.4" page). I also read
>>> some other people had the same issue in the past, but I
>>> cannot find the solution and neither any package for
>>> Ubuntu that satisfies the requirements.
>>>
>>> oneadmin at solaris:~/one-1.3.90$
>>> <mailto:oneadmin at solaris:%7E/one-1.3.90$> sudo scons
>>> scons: Reading SConscript files ...
>>> Testing recipe: pkg-config
>>> Error calling pkg-config xmlrpc_server_abyss++ --static
>>> --libs
>>> Testing recipe: xmlrpc-c-config
>>> g++ .xmlrpc_test/xmlrpc_test.a7469a.cc
>>> <http://xmlrpc_test.a7469a.cc> -o
>>> .xmlrpc_test/xmlrpc_test.a7469a.cc.out -L/usr/lib
>>> -lxmlrpc_server_abyss++ -lxmlrpc_server++
>>> -lxmlrpc_server_abyss -lxmlrpc_server -lxmlrpc_abyss
>>> -lpthread -lxmlrpc++ -lxmlrpc -lxmlrpc_util
>>> -lxmlrpc_xmlparse -lxmlrpc_xmltok -I/usr/include
>>> 1>>.xmlrpc_test/xmlrpc_test.a7469a.cc.log 2>&1
>>>
>>> Testing recipe: pkg-config
>>> Error calling pkg-config xmlrpc_client++ xmlrpc++ --libs
>>> Testing recipe: xmlrpc-c-config
>>> g++ .xmlrpc_test/xmlrpc_test.2781fc.cc
>>> <http://xmlrpc_test.2781fc.cc> -o
>>> .xmlrpc_test/xmlrpc_test.2781fc.cc.out -L/usr/lib
>>> -lxmlrpc_client++ -lcurl -lgssapi_krb5 -lxmlrpc_client
>>> -lxmlrpc++ -lxmlrpc -lxmlrpc_util -lxmlrpc_xmlparse
>>> -lxmlrpc_xmltok -Wl,--rpath -Wl,/usr/lib -I/usr/include
>>> 1>>.xmlrpc_test/xmlrpc_test.2781fc.cc.log 2>&1
>>>
>>> Testing recipe: pkg-config
>>> Error calling pkg-config xmlrpc_server_abyss++ --static
>>> --libs
>>> Testing recipe: xmlrpc-c-config
>>> g++ .xmlrpc_test/xmlrpc_test.6d95be.cc
>>> <http://xmlrpc_test.6d95be.cc> -o
>>> .xmlrpc_test/xmlrpc_test.6d95be.cc.out -L/usr/lib
>>> -lxmlrpc_server_abyss++ -lxmlrpc_server++
>>> -lxmlrpc_server_abyss -lxmlrpc_server -lxmlrpc_abyss
>>> -lpthread -lxmlrpc++ -lxmlrpc -lxmlrpc_util
>>> -lxmlrpc_xmlparse -lxmlrpc_xmltok -I/usr/include
>>> 1>>.xmlrpc_test/xmlrpc_test.6d95be.cc.log 2>&1
>>>
>>> Testing recipe: pkg-config
>>> Error calling pkg-config xmlrpc_client++ xmlrpc++ --libs
>>> Testing recipe: xmlrpc-c-config
>>> g++ .xmlrpc_test/xmlrpc_test.ce42a1.cc
>>> <http://xmlrpc_test.ce42a1.cc> -o
>>> .xmlrpc_test/xmlrpc_test.ce42a1.cc.out -L/usr/lib
>>> -lxmlrpc_client++ -lcurl -lgssapi_krb5 -lxmlrpc_client
>>> -lxmlrpc++ -lxmlrpc -lxmlrpc_util -lxmlrpc_xmlparse
>>> -lxmlrpc_xmltok -Wl,--rpath -Wl,/usr/lib -I/usr/include
>>> 1>>.xmlrpc_test/xmlrpc_test.ce42a1.cc.log 2>&1
>>>
>>> scons: done reading SConscript files.
>>> scons: Building targets ...
>>> scons: `.' is up to date.
>>> scons: done building targets.
>>>
>>> --
>>> Gianni Dalla Torre
>>>
>>
>>
>> --
>> Gianni Dalla Torre
>> Computer Science Engineering
>>
>> INFN -CNAF
>> Via Ranzani 13/2
>> 40127 Bologna, Italy
>> Phone: +39 051 6092913
>> Fax: +39 051 6092916
>> mail: dallatorre&cnaf.infn.it <http://cnaf.infn.it>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20091214/8c9f6660/attachment-0001.htm>
More information about the Users
mailing list